Limit 500 registration rules?

Greetings,
I'm trying to segregate servers based on their location, because each location has the same hostnames.
For example:
Store 001: managerpc, register01, register02
Store 002: managerpc, register01, register02, register03
Store 750: managerpc, register01, register02
I hit a limit of 500 rules when attempting to create registration rules so maybe I need to approach this from another angle.
The FQDN uniquely defines each server:
managerpc.st001.example.com
managerpc.st002.example.com
My theory was to use a registration filter of "DNS ends with st001.example.com" -> Devices/Servers/Stores/ST001.
Is there a limit on the number of registration keys too? What are all the options when adding a service with rug sa? Can I specify a folder from the agent side? Parsing the FQDN from the command line on the agent might be easier that doing this with registration rules/keys.

skohrs,
I have currently not answers for all your questions but I try ...
Is there a limit on the number of registration keys too?
I just started a short script creating the first 500 registration keys. Then I can check if there is a limit. Might take an hour or so ...
What are all the options when adding a service with rug sa?
There seems to be no information about those options and I have no idea what they mean with it. I'll check the documentation and will ask my Novell contact if I find no information about it.
Can I specify a folder from the agent side?
No, you only can use a registration key and that defines the folder or use no key and then the registration rules does it's job.
Rainer

Similar Messages

  • Device registration rules backup

    Hi,
    I've spent a lot of time putting in device registration rules for different subnets. I'm already backing up the database and also the closest server rules / certificate authority using zman on the (linux) servers.
    What I'm not clear on is where the registration rules are held, can anybody advise please?
    Thanks in advance,
    David

    dwhite42,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • How to access the limit in a rule

    Hi Gurus,
    How can I access the Limit in a PCR.
    Is it possible to access the current value of the Wagetype class with Just the name of the wage type class?
    eg: AMT=401L

    Hi Payrolltax
    You can query several tables when reading NUM/AMT/RTE
    - so you can put into a rule something like
    AMT=C (wagetype)
    But don't forget that its likely, for the period being processed, nothing will have been added to the CRT (ie the CRT value will be the total up to the end of the last pay-period).
    So, if you want to say "what's the value up to the end of this current period", maybe
    AMT=C (wagetype)
    AMT+ (the current wagetype)
    Then you have the full total for the year
    Hitting F1 on AMT will give you more doco regarding the other tables that can be queried.
    Mary

  • Question:  Web Album Limit (500 pics) and Library Logic?

    I've been using Lightroom for my photos, but the Faces and Places features of iPhoto 09 lured me into giving it a try, and now that I did I have two issues for those of you that use iPhoto:
    1) What is the advantage of having all your photos in ONE file (i.e. the iPhoto Library)? It appears to me that if I want to give a colleague a picture or pictures, I have to export them, or have to option click to find them in the library? Yes, I know that iPhoto has the option to NOT import all yor files, but any changes to the files location and iPhoto goes bananas. So what's the advantage?
    2) Faces and Places: Two GREAT features...that seemed crippled iPhoto's exporting and sharing features. After I tag a HUGE batch of photos, how do I share them with people? I have to export them, which in this scenario isn't bad at all...but the web sharing is ridiculous, as web albums are capped at 500 photos. I know that I can upload in 500 photo increments, but that's not a viable option, because when you combine the batches using Flickr's Organizr, iPhoto only downloads up tp 500 photos for the local copy! What gives?
    Anyone else feel my pain or have any workarounds, or words of advice? Don;t get me wrong, I LOVE the Faces and Places features, as well as the Flickr and MobileMe integration, but it just seems half done, or needs a little time to mature.
    Can anyone

    1) What is the advantage of having all your photos in ONE file (i.e. the iPhoto Library)?
    It’s not a file. It’s a Unix package. Inside all the files are stored in folders etc.
    The advantage is the absolute point of iPhoto - managing your Photos without having to think of file management. Import them, forget about the files, focus on the photos.
    It appears to me that if I want to give a colleague a picture or pictures, I have to export them, or have to option click to find them in the library?
    Hmm. Those are two options, here’s a few more...
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 Only*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and 10.5* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    but the web sharing is ridiculous, as web albums are capped at 500 photos.
    Having never created a web album of more that 500 photos I did not know of this limit. Been posting on this forum for a while now and I think you may be the first person to mention it. Iphoto is a Mom and Pop photo organiser, firmly focussed on the home user with a point and shoot camera. I don’t know that many folks in the target user group have a problem with the limit.
    iPhoto menu -> Provide iPhoto Feedback. Perhaps they’ll increase it.
    Regards
    TD

  • Limit user registration based on email

    I have a client that wants to allow people to register, but wants to limit registrations to people who attend their school (which may expand to more schools later on). Is there a way to restrict a user from registering based on their email?
    For example:
    User A can register because their email address is *user.name*@BCUniversity.edu
    User B can't register because their email address is *user.name*@NotBCUniversity.edu
    I assume there would be a way to editing the form validation to only accept registrations from @BCUniversity.edu only, but I do not know how I would go about doing that. Any help would greatly be appreciated.

    If you are using Dreamweaver, you should be able to do this with the Spry Validation tools. I would imagine some Javascript or jQuery could be used as well.

  • Is it possible to limit FX business rule to only records selected in logic

    We are trying to convert from the standard older FX logic (MULTICURRENCYTRANS). The business rule is definitely faster when I run FX over all the records (purposefully). However, every time the FX stored procedure is called from a script logic file (package) it is running over ALL the records for the category specified in the package selection criteria. However, it is ignoring the other selections (product in this case). It should only update FX for the records specified in the package selection criteria. Because of this we are seeing increased run times on the packages. Is there additional logic needed in the FX script? If this is normal behavior, the stored procedure/business rule for FX is not a feasibly replacement for the script logic FX process previously delivered by SAP.
    Is there a way to fix this so we can use the business rule?

    I figured it out. I needed to add a couple of dimensions that are being passed from the package front end. The delivered business rule only has category as a variable. I had to add our entity dimension and our user defined product dimension.
    SAP delivered:
    *RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%CATEGORY_SET%','','RATEINPUT','%SCOPETABLE%','%LOGTABLE%')
    Revised for our installation:
    *RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%CATEGORY_SET%','%PRODUCT_CP_SET%','%COCODE_SET%','','RATEINPUT','%SCOPETABLE%','%LOGTABLE%')
    Carlos

  • 500: Registration failed. Check Mobile user and activation code

    Hi all,
    I am currently implementing SAP's customer financial fact sheet in our landscape. I have tested the service and it is working and creation application and application connections are also done.
    However, when I tried to log in using the application i got this error
    I have tried many time in creating the application connection with a new username and activation code but still I had this error. I also have double check to make sure the username and activation code is the same as in the SCC that I had created.
    Could anyone advice me on this. All advice are greately appreciated.
    Thank you.
    Regards,
    Amanda

    Hi all,
    The error above had been solved by adding a security as seen in the print screen bellow.
    Thank you.
    regards,
    Amanda

  • 500: SeeFusion Terminated Request

    What does all this mean?
    I get this when trying to edit an Access DB or sometimes get
    another 500 error.
    500
    ROOT CAUSE:
    com.seefusion.SeeFusionKillError: SeeFusion terminated
    request: Page Time at 50844ms >= limit of 50000ms (rule
    "latentpages")
    at com.seefusion.rd.a(rd.java:251)
    at com.seefusion.Filter.doFilter(Filter.java:61)
    at com.seefusion.SeeFusion.doFilter(SeeFusion.java:1471)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
    at
    coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
    at
    coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
    at jrun.servlet.FilterChain.service(FilterChain.java:101)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at
    jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at
    jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at
    jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    javax.servlet.ServletException: ROOT CAUSE:
    com.seefusion.SeeFusionKillError: SeeFusion terminated
    request: Page Time at 50844ms >= limit of 50000ms (rule
    "latentpages")
    at com.seefusion.rd.a(rd.java:251)
    at com.seefusion.Filter.doFilter(Filter.java:61)
    at com.seefusion.SeeFusion.doFilter(SeeFusion.java:1471)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
    at
    coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
    at
    coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
    at jrun.servlet.FilterChain.service(FilterChain.java:101)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at
    jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at
    jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at
    jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    at
    coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:70 )
    at
    coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
    at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
    at jrun.servlet.FilterChain.service(FilterChain.java:101)
    at
    jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
    at
    jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at
    jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
    at
    jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
    at
    jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
    at
    jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
    at
    jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
    at
    jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    This error is a result of SeeFusion being setup to catch long-running scripts or when a limit has been reached of some kind (memory, threads, time etc). SeeFusion can protect ColdFusion servers from having serious problems due to poorly scripted CFM pages or database slowdowns by mitigating the thread count. Please let us know if we can be of any further help. We run SeeFusion on our Shared ColdFusion hosting as provided http://hostek.com/hosting/coldfusion/coldfusion-hosting.asp.
    Thanks,
    Jon C.

  • Not Getting Benifit Plan in a rule -- Please help urgent

    Hi Gurus,
    I need to query the benifit plan and need to override the system calculated values in certain conditions. But I am not able to query the benifit plan in a rule
    Made a rule like this
      D TABLEP0169VARGBBPLAN
    &&&&        CONTINUE  
    0381 AMT=& VAR1AMT/2 ADDWTI6200
    But its not getting the plan '0381' (but its there in the Master data) and its coming to continue always
    *I am invoking the rule like this in the schema*
    ACTIO ZSPT A
    Please help me to figure out whats going wrong. Its very urgent
    thanks

    Arun this is not working ..
    The view name exceeds the 10 char limit in the rule while invoking that with Table..

  • Best way to manage rules?

    I have just maxed out the rules for iCloud (99 rules allowed). On the Mac you can have more complex rules so you can have one rule that says basically if I get an e-mail from (Lands End, L.L. Bean, Amazon, etc) file the e-mail into my "Stores" folder. However on iCloud rules you need one rule for each store. I prefer using iCloud for the rules so they are sorted before they get to my Mac. This way they are sorted if I check my mail from an iPad or another Mac or on the Web. However, I didn't know until this morning that iCloud has a limit of 99 rules. So now I need to decide what is the best way to adjust.
    So my question here is how do you manage rules to sort e-mail?
    Thanks,
    Scott

    Winston,
    This is true if your main computer is always on and connected to the internet. However where I live currently we have frequent power outages and internet connectivity issues. Some of these problems require my to restart routers in order to fix the problem. However, if I am traveling away from home I am not able to do this. In a case like this if my rules are on my main Mac at home and I am checking e-mail from an iPad of Macbook Pro on the road no rules will run.
    Thanks.
    Anyone else have thoughts on this?

  • LIMIT within universe

    Hi there,
    we on on XI 3.1, unix deployment, MySQL database
    I wondered if there was a smart way to include the LIMIT syntax in the universe to generate this SQL:
    SELECT
      tableA.column
    FROM
      tableA  limit 500
    I can obviously do custom SQL in webi, but this is for QaaWS where custom SQL is not possible, so the solution needs to be implemented in the universe
    regards
    James

    Hello
    I didn't have the chance to try it so I cannot confirm it will work.
    There is a parameter in Universe Designer called "End_SQL".
    This parameter will append a string to all queries executed with that universe.
    Try setting the End_SQL  parameter to " limit 500" and try running a query with QaaWS.
    Hope that it helps
    PPaolo

  • Rule Based System

    Hi all,
    I am currently working on a project which required to Implemented 500-600 rules in the System. Some of them are global Rules and some are just module level rules.
    Is there any pattern exist for Rule Based System?
    Thanks in Advance
    Rashmikant

    Just 1 pattern?
    The short answer: No.
    The longer (though still short answer):
    A rules engine is not the easiest thing to implement, just 2 or 3 classes don't hack it if you're working with a dynamic rule base that is steered based on input/ouput and states.
    There are rules engines for sale and there also a few opensource, look on the internet, use your best best friend.

  • Cohort Usage for Mass Registration to Program of Study

    Dear SLCM Gurus,
    After configuring cohorts successfully for module booking. I , now want to use this functionality for Program of study registrations/booking.
    I want to limit total SC bookings based on Student category i.e. General Category, Reserved category NRI Category and Management category. In other words i want to use it for Quota system. On running a report i should be able to figure out which student belongs to which category.
    SAP delivers standard cohort context as 0001(Module booking) which can be used for mass module booking. How can i perform mass registration for Program of study? Suggestions are welcome.
    Thanks in advance.
    Warm Regards
    Vinod Kumar

    Hello Michael,
    pl let us know which functional modules will serve the purpose for mass registration to program of study
    based on the student group. It would be a great help.
    Infact, all the indian universities has reservation quota where they will limit the registration of the students belonging to a group for a program of study once it exceeds the quota
    The following gives u an idea on how the admissions are reserved for a student group( category )...
    Category                                  Quota
    SC                                   15%
    ST                                    6%
    BC A                                    7%
    BC B                                   10%
    BC C                                   1%
    BC D                                   7%
    NCC                                   1%
    Games & Sports                   0.5%
    Physically Handicapped          0.5%
    Girls                                   33.3% of Each Category
    The fee structure  also depends on the category. It varies for different category students.
    Regards,
    Sravan

  • Exchange 2010 - Error setting a new transport rule for email disclaimer

    Hi
    Trying to setup some additional email disclaimer rules on Hub transport under Org Config on exchange 2010. We allready have a few and they work ok, however we are trying to replace this woth some alternate ones and are getting the error
    The length of the property is too long. the maximum length is 8192 and the length of the value provided is 8522.
    Most of this length comes from the html code we are inserting into the disclaimer. I've reduced it by about as much as i can but it's still too large. Does anybody have any suggestions or know if it;s possible to increase the 8192 sixze limit ?
    Regards
    Roger

    Hi Roger,
    For AD replication packet the ideal size is 8K. Or the above error may occur due to build/design issues.
    You can eliminate this size related issue by splitting the large rule into multiple rules. This size limit is Per Rule and does not add up for all rules. 

  • One-time registration key

    Greetings, everyone.
    I'm trying to use a registration key to apply initial bundles to a new workstation. The key places the workstations in a Pre-Stage folder. However, when the workstation is deployed to a retail location, I want it to forget the registration key and re-register using the registration rules. Deleting /etc/zmd/deviceid and /etc/zmd/secret did not result in the desired behavior. The device re-registered and showed up in the Pre-Stage folder again. I've searched for the key in /etc/zmd/* and /var/cache/zmd/* without any luck either.
    Aside from manually deleting and re-adding the registration without the key, how is this possible?

    skohrs,
    there is a "services" file located in /var/lib/zmd that holds the registration key.
    You might need to delete that file as well, then your registration rules should work.
    Rainer

Maybe you are looking for