Limit Absence Hours increments of 4 or 8 ESS/IT2001

Hi Experts,
I only want my employees to be able to take vacation hours in increments of 4 or 8 in ESS and record onto Infotype 2001 as well. I have gone to ESS-Specify Processing Processes for Types of Leave but I am unsure if this is where the change should be made in configuration. Please advise.
Thanks,

Hi,
You can write a validation to allow employee to request the absences only in increments of 1/2 day or full day based on the WSR.
Thanks,

Similar Messages

Register exact clock times (4 digits) instead of half-hour increments in Record Working Time (Calendar User Interface)?

Hello
Is it possible to register the exact working times in the HRESS_A_CATS_CALUI WDA instead of half an hour increments?
Now:
choose between 0800 to 0830
Need:
0810 to 0825

In calendar interface, standard is 30, but if you need 15 etc you need to a modification etc, use the normal interface with clock times or in details screen you can enter clock times enable fore the cats profile using CAC1 http://scn.sap.com/thread/3678682

ESS Create Leave Reqeust Ui5 Absence Hours NaN

Hi,
We are implementing ESS UI5. The create leave request screen defaulting Absence Hours as NaN, even after the Daily workschedule is showing planned hours.
We are at SP 007.
Screen shot here.
Appreciate any inputs and help
Thanks
Gita

Hi All,
Yes, SAP has released Note 2140301. After implementing the note, the NaN is not populating, however after clicking on Check or send button the application is unresponsive.
We have updated to SAP already.
Have you facing the same issue?
Thanks
Gita

7 hours absence hours

Hi All,
1. I have created 5.25 hours daily work schedule on wednesday and thursday and 8.75 daily work schedule on friday. Monday, tuesday, saturday and sunday are off.
2. When I create absence on thursday, system is showing 8.75 absence hours. but I want to show 7 hours in IT 2001.
Please anybody help me, where I need to do changes for getting 7 hours in IT 2001.
Regards
Siri

Hi,
As the working hrs on Thursday are 8.75 system will show 8.75 only. You can manually enter 7 in absence hours field.
And if you want those 7 hrs to come automatically put 80% (instead of 100%) in the hrs quota multiplier field in the counting rule.

Movie rental time limit: 24 hours not enough?

If I am in the middle of watching a movie and the 24 hour limit is up, does the movie just quit or will it keep playing until it's finished?
And is it just me, or is 24 hours not long enough? Suppose at 7:00 I decide to rent Cinderella for the kids, but by 8:00 they're all asleep. They'll have to wait until the next night to watch it, but unfortunately when the clock strikes 7, the rental, like Cinderella's coach disappears. It might play to completion if I start it at 6:59, but if I wait until 7:01 to continue it, I'm SOL
Wouldn't a 30-hour time limit make more sense?

My previous post regarding this issue was pulled due to "inappropriate non-technical issues". So i will try to be more technical. I downloaded a movie over a three day period only to find that the movie had a 2 hr window left after the download was finished. This was due to the fact that i clicked on the rented movie icon to see what it was (this was my first time renting). The movie played for 10 sec. then i stopped it. I guess i was unaware of the 24 hour limit.
I feel that if you have a 3o day rental...you should be able to view the movie for 30 days, and as many times as you wish during that 30 days. Its good enough for Netflix and the like. I don't think I'll rent anymore form iTunes.
That is my two cents.
Matt

How to schedule hourly incremental User Profile and Audience compilations?

Can this be done in CA?
Thanks,
Scott

The incremental UPA Timer Job can be changed in Central Admin's Review Timer Job definitions. If you do set the job to hourly, you'll run into this issue with how the job is displayed: http://thesharepointfarm.com/2012/12/setting-the-upa-incremental-timer-job-to-hourly-results-in-no-schedule-set/
You can also change the User Profile Service Application - Audience Compilation Job from Weekly to hourly, but I'd discourage it. It is set to weekly (even on SharePoint Online) as it is a fairly expensive operation.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Is it possible to limit the hours printed on a calendar page?

For example, I want to only print the events that occur from 5:00 a.m. - 8:00 p.m. Thank you for your help.

Go to preferences -> general -> set days starts at and days end at to your preference and show x hours at the time.
This will prevent "empty" hours from being printed, but it will print all events of that day/week.

Absence hours

Hi,
Currently our system is calculating half day / full day loss of pay for any no. of days entered in the infotype 2001. Now we have a requirement to deduct the salary based on no. of hours in the infotype 2001. For example If we enter 2 hours for any day, system should deduct the salary only for 2 hours for a particular day.
Please let me know some steps to configure.
Regards,
Rajakumar.S

Rule XPP1 to me modified,
TSAU** to be used instead of TKAU**, but simply this will not solve your queries... you need to understand what exactly all these are, and how it is floated.
Press f1 and proceed.
Regards
...Sadhu

Leave Req - workflow - leave days and absence hours

Hi,
For a leave request in workflow, how do i read the leave days (total number of leave) and absense hours from the workflow container? Which fields give that information?
Regards

Hi Partha Kar,
These Links are useful to You,
[Leave request example in workflow]
[Re: Employee Leave Request]
[Leave request auto approvals]
Regards,
Raghava Channooru

Show Target hours in Recording Working Time(CATS) ESS version

Hi All,
I am trying to find out, if I can show the planned target hours on the web side of the Record Working Times component like it is shown in CAT2 as the first entry in the table. Is this possible ? Cna it be done by customizing somehow ?
Regards,
Paulo Poinha -- Accenture

Hi Paulo
I think the only way here would be to modify the standard Web Dynpro application directly in a JDI system. Check note 872892 for more info on this.
-Mikko

Infotype 2001 (Absences) - storing absences in hours

Hi, how can i store absences in hours instead of days? the only unit of measurement avialable is days. We need to be able to have the user enter absences is hours and it can be more than 24 hours. Is this possible?
Thanks.

Dear Experts,
Below is the screen. We configured 25% Quaterly Deduction Loss of Pay. it is showing Absence Hours : 17:00 The system is picking total number of working hours Suppose for example : If I input 25% Absence Type for 2 Days It should show in Absence Hours : 2 Hours but Payroll calculations are happening correctly
Formula: 8hrs divided by 4hr = 50%
4hrs divided by 2hrs = 25%
Absence Hours = 2hrs
Experts please throw some light on this
Is it possible to do with rounding rules or is there any another screen I need to activate If it is possible through rounding rule How do I ????

Edit Capture Time, Half Hour Time Zone Increment

Using Lightroom 1.3.1 Windows, I am trying to Edit Capture Time on a batch of photos. Some countries use half hour increments for time zones. How do I shift capture time by +11.5 hours?

Ummm. I agree? It's completely unintuitive. I think.
Adobe - please fix it and make it intuitive OK!
And for the record, this was with LR2.3 on OSX.
Update: bug filed - http://www.rediguana.co.nz/gav/2009/04/22/bug-lightroom-30-minute-timezone-support/

Hi, I have assigned a time capsule as backup. It does a 29GB BU everyday and then goes incremental every hour. Is it normal to BU 29GB when I have hardly changed files.

Hi,
I have assigned a time capsule and a USB harddisk as backup devices.
Usually I keep both the devices disconnected and doa backup every couple of days and usually alternate between the two.
I see that the TM does about 29GB of backup when every I connect either of my devices and then it goes hourly incremental after that.
I thought the TM backups were incremental after the 1st inital full backup.
What can I do to mitigate this.
Thanks
rjcq

rjcq wrote:
I am using Parallels for running Windows 8 mostly for using MS Access 2007, but my daily change of data is not more than 50 MB.
It's my understanding that if the virtual machine files you use are included in what Time Machine is instructed to backup, any change to the content of the VM file is considered to be a change to entire VM file. I use VMware Fusion rather than Parallels and with Fusion, the VM file is actually a folder with a special icon and inside is a collection of component files which actually make up the VM. While only some of them may be affected by using the VM, the entire VM is backed up by Time Machine. Moreover, if the backup is taking place while the VM is in use, TM is capturing the VM in a state of flux so the internal components may not agree (the VM is so big that there might be some minutes between the beginning and end of the backup so both ends don't agree with each other; the short version is the VM may be corrupted). I don't know if Parallels saves its VM's the same way but the time it takes to backup large files shouldn't change so the risk of corruption is still there. I'd suggest that in addition to TM, you should make periodic complete bootable backups on another drive. Apart from a safety net, that also gives you the VM backup.
In Time Machine options you can exclude the folder the VM's are kept in. Try that and see if the size of the backup goes down.

Why do I have mysterious cellular data usage (Verizon) every 6 hours on all 3 of my iphone 5's?

I have recently uncovered mysterious cellular usage on three different iPhones. I am a Verizon customer and discovered this by examining the cellular data use logs. What I found are a long series of mysterious data usage logs. I have visited the Genius Bar at my local Apple Store 3 times now to log notes and discuss the issue. It is being escalated.
The characterstics are as follows:
All my family phones have the appropriate IOS and hardware updates (verified by the GeniusBar at my local Apple Store).
This is occuring across three phones, which happen to all be iphone 5. Two are 5 and the other a new 5s. We do have one iphone 4 in the family but the issue (so far as I can tell), is not happening on it.
One iphone 5 has IOS 7, the other IOS 6. The new 5s has of course IOS 7.
Mysterious data use happens even while connected to wifi.
Each mysterious data use log entry is exactly 6 hours apart. For example: 2:18 AM, 8:18 AM, 2:18 PM, 8:18 PM, 2:18 AM ... etc. It cycles AM and PM, same times, for a day to many days until some condition causes it to change (evolve).
The times evolve. One day it could be cycling through at one time series, then it changes to another time sequence and continues until the next condition.
The data usage is anywhere from a few K to many MB. The largest I've seen is over 100 MB.
The logs clearly show these usages are not due to human interaction. It is a program.
If cellular connection is used frequently (by the owner), the pattern is hard to pick out. Luckily, my family member is very good about only using wifi whenever possible, so these mysterious use patterns are easy to pick out.
Verizon allows access to 90 days worth of data logs, so I downloaded and analyzed them. This has been happening for at least 90 days. I have found 298 instances of mysterious use out of 500 total connections to cellular. A total of 3.5 GB of mysterious cellular data has been recorded as used in that 90 days by this phone alone. Only .6 GB of the total cellular data use is legitimate, meaning by the person.
This issue is occuring across three different phones. Two are iPhone 5, and the third is a recently purchased iPhone 5s. The 5s I have not touched beyone the basic startup. I have left it alone on a desk for 3 days, and looking at the logs, the mysterious data use in the same pattern is occuring.
So ... I am speaking to both sides, Verizon and Apple to get answers. Verizon puts their wall up at data usage. It doesn't matter how it is being used, you simply need to pay for it. Yes, the evidence I have gathered is getting closer to someting on Verizon's end.
Before pressing in that direction, I am hoping someone reading this may recognize this issue as a possible iPhone 5 issue ... OR ... you, right now, go look at your data usage logs available through your carrier's web account, and see if you can pick out a pattern of mysterious use. Look especially at the early morning instances when you are most likely sleeping.
I am hoping this is a simple issue that has a quick resolution. I'm looking for the "ooohhh, I see that now ..." But I am starting to think this might be much bigger, but the fact is, most customers rarely or never look at their data usage details, much less discover mysterious use patterns.
The final interesting (maybe frightening part) thing about all this is that I discovered while talking to Verizon ... they do not divulge which direction the data is going. This goes for any use, mysterious or legitimate. Is cellular data coming to your phone, or leaving it? Is something pulling data from your phone? We know that it is possible to build malware apps, but the catch with my issue is that it is also happening on a brand new iphone 5s with nothing downloaded to it.
Thanks for your time

Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
What is using data, unsolicited, every 6 hours?
Why does it change?
Why does it only happen on the iPhone 5 series and not the 4?
Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

Regarding REFRESHING of Data in Data warehouse using DAC Incremental approa

My client is planning to move from Discoverer to OBIA but before that we need some answers.
1) My client needs the data to be refreshed every hour (incremental load using DAC) because they are using lot of real time data.
We don't have much updated data( e.g 10 invoices in an hour + some other). How much time it usually takes to refresh those tables in Data wareshouse using DAC?
2) While the table is getting refreshed can we use that table to generate a report? If yes, what is the state of data? Stale or incorrect(undefined)?
3) How does refresh of Fin analytics work? Is it one module at a time or it treats all 3 modules (GL, AR and AP) as a single unit of refresh?
I would really appreciate if I can get an answer for all the questions.
Thank You,

Here you go for answers:
1) Shouldn't be much problem for a such small amt of data. All depends on ur execution plan in DAC which can always be created as new and can be customized to load data for only those tables...(Star Schema) ---- Approx 15-20 mins as it does so many things apart from loading table.
2) Report in OBIEE will give previous data as I believe Cache will be (Shud be) turned on. You will get the new data in reports after the refresh is complete and cache is cleared using various methods ( Event Polling preferred)
3) Again for Fin Analytics or any other module, you will have OOTB plans. But you can create ur new plans and execute. GL, AR, AP are also provided seperate..
Hope this answers your question...You will get to know more which going through Oracle docs...particular for DAC

Limit Absence Hours increments of 4 or 8 ESS/IT2001

Similar Messages

Maybe you are looking for