"Limit Capture/Export File Segment Size To" doesn't work

I put the limit to 4000 MB before i startet capturing HD-video, but it didn't work. Several of my files are bigger than 4 GB. This is a problem since I use an online back up service that has 5 GB as the maximum file limit. Any suggestion to fix this problem is highly appreciated.

I believe, although I am not 100% sure, that the "Limit Capture/Export File Segment Size To" does not apply to Log and Transfer, only Log and Capture.
Since Log and Capture works with tape sources, when the limit is hit, the tape can be stopped, pre-rolled and started again to create another clip
In the case of Log and Transfer, it is ingesting and transcoding existing files; the clip lengths (and therefore size) are already determined by the source clip.
If you are working with very lengthy clips, you may want to set in and out points to divide the clips into smaller segments.
MtD

Similar Messages

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
I know that Acrobat, full version, 10 works with Lion...use it myself.

Exports from Keynote to Flash doesn't work

I am trying to create an automatic slide show and export it as an .swf (or anything) to run on a web site and it doesn't work. For documentation of my tests go to: http://www.equalivote.com/abKeynoteExportTESTS.pdf

Another thought: If you need it to be flash, could you export the slideshow to quicktime, then put the quicktime movie into a flash project? I'm not too familiar with flash but it seems like that would be worth a try.

Adobe Acrobat Pro Extended: CSV Export of a 3D-Model doesn´t work

Hello @ all.
I´m using the Adobe Acrobat 9 Pro Extended Tool. Now I want to export a 3D Model in a csv-file. I´ts no problem to export it in a xml-file andnopen it, but if I want to open the exported csv-file, then I see nothing -> an empty excel table :-( If I use a csv-viewer-tool then I became an error, that the tool can´t open the file.
Can anybody help me, or know somebody the solution to this problem?
Maybe have anybody the same problem?
Thanks, Luna :-)
PS: I´m from germany, my english isn´t the best ;-) Nevertheless I hope you understand my problem!

I may have figured out what was causing my problem with conversion of Inventor 2009 to 3D PDF. After playing around with a number of inventor files, I discovered that the conversion worked fine when there were no references to external files. For example a .ipt file (part file) seemed to convert fine. I believe the problem was that on the form one obtains with Edit->Preferences->Convert to PDF->Autodesk Inventor->Edit Settings->Import->Assembly, the check box for "use root file directory" was NOT checked. Oddly, this is the default and I'm pretty sure I tried setting the conversion options to the default. In any case, I now seem to be able to perform the conversion of Inventor 2009 to 3D PDF so this problem is solved I guess.

Image Policy when I create a PDF file: warn and continue doesn't work

Hi!
I need to create a PDF file with lots of images, and I need to know if any of that images is in low resolution (<300 ppi). I have tried to use the image policy in the PDF settings but it doesn't work, because if I choose "Warn and continue" (if the resolution of any image is <300 ppi, warn and continue) the program creates the PDF file but don't warm me and I don't see any message... and I'm sure that there are bad images because I have made a check test with 72ppi images.
Thank you very much for your attention,
best regards!!
(Sorry if my English is not as good as it would be)

Thank you very much Bernd Alheit, that's perfect for my job!
Thank you!

Commons file upload in IFRAME doesn't work

Is there any special handling for Using File Upload in a jsp page in IFRAME.
Because my upload code works every where in applicatuion but when used in
iFRAME it doesn't work
Please share your ideas what would be the problems using file uploads in IFRAMES?

It is working Alternatively if send the request processing to the parent page
Message was edited by:
raghuveer_vellanki
Message was edited by:
raghuveer_vellanki

Can't Join Group Chats, Can't Receive Files, and Skype Home Doesn't Work

Okay, so back when Windows 8 was newer I got my current laptop and when I saw Skype's original Windows 8 design, I said hell no to that and downloaded an earlier version of Skype instead. When Skype did that big overhaul and stopped support for all older versions, I was at least happy to see it was back to being on the desktop instead of that Windows 8 pseudo-tablet nonsense. But at the same time, I stopped getting notifications from Skype Home - it always says it's unavailable. Some time after that, in between Skype's updates, I started having trouble with Groups. Every time someone tried to add me to one, I couldn't see it, even if they said I was in it on their screen. Eventually I had to start making all Group Chats myself, because at least then it worked for me... up until the 7.7 update. Now no matter how I try to get into a Group now, it straight up doesn't work. And before I got locked out of Groups entirely, I started having issues with files, right around when the "inline photos" thing happened - they just don't work when sent to me, and I can't send them either. When people try to send them to me it's just a grey image and something about how it's not supported or it didn't go through. I've sort of just been patiently dealing with all of it until the newest update when Groups stopped working entirely and I was in the middle of trying to join an important conversation. I Googled that specific issue and found a ton of unresolved threads about it dating back to at least 2013, I believe. I tried every suggestion I could find - I restarted, uninstalled Skype, reinstalled Skype, restarted after uninstalling and then reinstalling... the list goes on. Every time I got it back, it was the same. Now I'm on Windows 8.1, and I don't know if that's related, but my boyfriend - who uses a Mac - is having none of these problems whatsoever, and he also has the latest version of Skype. With older versions of Skype not available, I ended up trying Skype Web, and it's letting me see all the Groups, which is the most important thing but I'd really prefer to go back to the desktop version. All three of my issues might be unrelated, but they've all progressed as Skype has updated so I figured I'd try to get help for all of them. I'm at my wit's end, here. I use Skype for a pretty large portion of my online communication, and being unable to use Groups or get files is really crippling the experience.

Hi,
I have the same problem.
Since I'm using my new Laptop with Skype 7.0, I can't join to a group chat.
It's a public chat and joining is enabled.
With my former laptop and former Skype-Version, I never had this problem.
I could click on a link in the browser and joined to the group.
I have to chose a program.
Unfortunately Skype.exe seems not to be the right decision.
I'm asked to get a Skype-app, which I never needed with the old version.
Which kind of app do I need and how can I get the app or what else can I do?

File download via servlet doesn't work with IE via https

I have a URL from a jsp page which points to a struts action servlet. This works with firefox via http and https. With IE it works via http but it doesn't work via https. The error message I get is "Internet Explorer cannot download ...File_name.doc from Server_name.
Internet Explorer was not able to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later."
Here is my code.
public ActionForward execute(ActionMapping mapping, ActionForm form,
               HttpServletRequest request, HttpServletResponse response)
               throws Exception {
          String attachmentURL = AppSettings.get("EAIAttachmentURL");
          String encodingScheme = AppSettings.get("EAI_encoding");
          String filename = request.getParameter("URL");
          String fileStr = URLEncoder.encode(filename, encodingScheme);
          fileStr = fileStr.replaceAll("\\+","%20");
          URL targetURL = new URL(attachmentURL + "/" + fileStr);
          URLConnection connection = targetURL.openConnection();
          connection.setDoInput(true);
          connection.setDoOutput(false);
          connection.setAllowUserInteraction(false);
          BufferedInputStream attachmentStream = new BufferedInputStream(
                    connection.getInputStream());
          * Setting the content disposition filename, so that the
          * attachment preserves the original filename
          response.setHeader("Content-Disposition",
                    " attachment; filename=" + filename);
          if (connection.getContentType() != null) {
               response.setContentType(connection.getContentType());
          else {
               response.setContentType("application/octet-stream");
          response.setContentLength(connection.getContentLength());
          response.setHeader("Pragma", "public");
          response.setHeader("Cache-Control", "public, max-age=-1, must-revalidate");
          if ( connection.getContentEncoding() != null ) {
               response.setHeader("Content-Encoding",
                         connection.getContentEncoding());
          BufferedOutputStream responseStream = new BufferedOutputStream(
                    response.getOutputStream());
          byte[] buffer = new byte[4096];
          int bytesRead;
          try {
               while ((bytesRead = attachmentStream.read(buffer)) != -1) {
                    responseStream.write(buffer, 0, bytesRead);
          } catch (Exception e) {
               log.error("AttachmentProxy error: " + e.getMessage());
          } finally {
               if (attachmentStream != null) {
                    attachmentStream.close();
               if (responseStream != null) {
                    responseStream.flush();
                    responseStream.close();
          return null;
There is a bug with IE when downloading via https according to Microsoft support site. Refer to http://support.microsoft.com/default.aspx?scid=kb;en-us;812935
According to this bug, I have set the response header - "pragma" to public and "cache-control" to public. I've also unchecked the Do not save encrypted pages to disk setting in IE Options, Advanced tab.
Has anyone come across this problem or a similar problem. Any help is appreciated. Thanks.

I have a URL from a jsp page which points to a struts action servlet. This works with firefox via http and https. With IE it works via http but it doesn't work via https. The error message I get is "Internet Explorer cannot download ...File_name.doc from Server_name.
Internet Explorer was not able to open this Internet site. The requested site is either unavailable or cannot be found. Please try again later."
Here is my code.
public ActionForward execute(ActionMapping mapping, ActionForm form,
               HttpServletRequest request, HttpServletResponse response)
               throws Exception {
          String attachmentURL = AppSettings.get("EAIAttachmentURL");
          String encodingScheme = AppSettings.get("EAI_encoding");
          String filename = request.getParameter("URL");
          String fileStr = URLEncoder.encode(filename, encodingScheme);
          fileStr = fileStr.replaceAll("\\+","%20");
          URL targetURL = new URL(attachmentURL + "/" + fileStr);
          URLConnection connection = targetURL.openConnection();
          connection.setDoInput(true);
          connection.setDoOutput(false);
          connection.setAllowUserInteraction(false);
          BufferedInputStream attachmentStream = new BufferedInputStream(
                    connection.getInputStream());
          * Setting the content disposition filename, so that the
          * attachment preserves the original filename
          response.setHeader("Content-Disposition",
                    " attachment; filename=" + filename);
          if (connection.getContentType() != null) {
               response.setContentType(connection.getContentType());
          else {
               response.setContentType("application/octet-stream");
          response.setContentLength(connection.getContentLength());
          response.setHeader("Pragma", "public");
          response.setHeader("Cache-Control", "public, max-age=-1, must-revalidate");
          if ( connection.getContentEncoding() != null ) {
               response.setHeader("Content-Encoding",
                         connection.getContentEncoding());
          BufferedOutputStream responseStream = new BufferedOutputStream(
                    response.getOutputStream());
          byte[] buffer = new byte[4096];
          int bytesRead;
          try {
               while ((bytesRead = attachmentStream.read(buffer)) != -1) {
                    responseStream.write(buffer, 0, bytesRead);
          } catch (Exception e) {
               log.error("AttachmentProxy error: " + e.getMessage());
          } finally {
               if (attachmentStream != null) {
                    attachmentStream.close();
               if (responseStream != null) {
                    responseStream.flush();
                    responseStream.close();
          return null;
There is a bug with IE when downloading via https according to Microsoft support site. Refer to http://support.microsoft.com/default.aspx?scid=kb;en-us;812935
According to this bug, I have set the response header - "pragma" to public and "cache-control" to public. I've also unchecked the Do not save encrypted pages to disk setting in IE Options, Advanced tab.
Has anyone come across this problem or a similar problem. Any help is appreciated. Thanks.

WRT54GL Need the TFTP EXE link or file please, FTP link doesn't work 550 error.

Bricked the router, bad flash. Power LED is flashing.
Need the TFTP excutable please, FTP link doesn't work.
Thanks.

Try this link to unbrick the Linksys Router.Download 44.3 KB the TFTP utility.
Message Edited by Wizzard on 10-07-2009 09:38 AM

Exporting file to PowerPoint 'Object doesn't support this action'

Hi -
Client is using Nakisa 2.0 SP2
When exporting an org chart to PowerPoint.
1. Hit 'export to PDF'
2.Select radiobutton 'Powerpoint OrgChart Object'
3.Pop up appears 'Object doesn't support this action' in browser
4. additional information appears in Browser, see below. I have followed the instructions and still the problem persists.
Any ideas? All help would be highly appreciated.
Export To PowerPoint
Compatibility
We currently support:
u2022 Microsoft PowerPoint 2000 / 2002
u2022 Microsoft PowerPoint 2003
Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore.
ActiveX Security
Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.

Hi Thanks for your reply.
This message I get in try to save orgchart to ppt. I have not checked the log file, so will have a look tomorrow. This is the only pop up I get. any ideas

Exporting Illustrator file in photoshop, editing doesn't work

Hi there,
I had created my web site layout in illustrator but realized how bad of an idea it was and would like to continue my layout in photoshop (CS5). I exported my .ai files into .psd. Only problem is I can't edit anything now. If I try to edit the text, move things around, crop... nothing works. Why?
Thanks for your help!

Illustrator is a vector editor. Photoshop is a bitmap editor.
By importing an Illustrator file into Photoshop it is converted into a bitmap and therefore individual components are no longer editable.
A partial solution is to export/import each colour component separately and re-do all text.

Xml file and htmlText box doesn't work

Hi,
i have a action script that read a xml file and put the content of this file in a
htmltext box, but when come inside the xml file a code like this"Test" the box (htmltext) appears empty.
my code
this.my_txt.embedFonts = true;
this.my_txt.html = true;
this.my_txt.htmlText =myTextos;
The variable "myTextos" load the content from xml ...but it doesn't appears in my htmltext box
How can i fix this?
obs: When i erase the tag in xml the variable "myTextos" appears correctly in my htmltext box.

Look my xml file:
<?xml version="1.0" encoding="utf-8"?>
<sm>
<item><![CDATA[Recordações do Escrivão Isaías Caminha
Leiva era o chefe, era a inteligência do grupo, pois, além de poeta, tinha todos os preparatórios para o curso de dentista.
<align="right">Fonte: BARRETO, Lima. Recordações do Escrivão Isaías Caminha. Rio de Janeiro: Fundação Biblioteca Nacional. Disponível em:
http://www.dominiopublico.gov.br. Acesso em 19 mar. 2008.

]]></item>
</sm>
why my dinamic box (in flash 8, action scrpit 2) doesn't interpret the tag ?

Log and Transfer for MXF files (Canon 300XF) suddenly doesn't work

I've searched for a solution and I've pulled out a few hairs...
We have 2 identical FCP7 MacPro workstations (2x2.66 dual-core Xeon, 16GB RAM, NVIDIA GeForce 7300GT, 256MB VRAM, OSX 10.6.8).
Both systems have successfully ingested MXF files captured by a Canon 300XF using Canon's XF plugin for FCP.
Until today.
One system doesn't ingest the footage anymore. One still does.
The faulty system sees the footage in Log and Transfer, but as we add the footage to the queue, the red exclaimation point pops up. Hovering over the alert gives us: ERROR: UNKNOWN.
Nothing has changed in either system.
Any ideas? Gremlins maybe?
Thanks!

...and a Canon XF Utility software uninstall/reinstall solved it.
Oops.
Should have tried that before the 17 other things we tried.

Export to CSV download link doesn't work

hi,
I have done the following:
If you click on the report link in your Region group
for the page concerned, then select the Report
Attributes tab and scroll down to Report Export you
can change the Enable CSV Output to YES and update
filename, separator etc.
This will show a link on the report page at runtime
that will allow the user to download the report in
CSV format to a spreadsheetAnd when I click on the link to download the report, it tries to download the page in html format...
any ideas on what the problem is?
thanks!!

Anoushka,
Do you have spreadsheet software such as MS Excel or OpenOffice installed? What filename did you choose? Do you have your browser configured to launch a spreadsheet application when files of a certaim mime type are downloaded?
Sergio

Search files in current folder doesn't work

When I search my whole mac for e.g. "Danse Macabre" i get the results from all over the place, which is to be expected.
So when I go into the folder I get a list of files including the one I was searching for. So far so good.
While typing in a new search inside that current folder, the file list refreshes and still shows me all files in that folder, even though the search string isn' part of most of the names:
When I actually specify to only look at the actual file names, the list shows only the file including the actual string. Unintuitive but acceptable. Just pressing the enter key will still show the whole unfiltered directory.
However - and that is my real grip - when I want to find specific files, e.g. all files containing the string "cab" then this happens:
The list empties the moment I type in the third letter, which doesn't make any more sense than showing all files when typing in the first letter. And when I actually commit the search which should show me all files containing "cab" in the name, I got nothing.
This makes the search feature in finder completely useless.
What's going on?
And how do I fix it?

I played around with this a little.
Although typing into the folder search field gives you an option labeled "Filename contains…", what you really seem to get is a search for "Filename contains a 'word' that begins with…."
A new "word" in the filename can be the beginning of the filename, anything that comes after a punctuation character, or a case change. The matching criteria itself ignores the case.
So in your example, you had a file named "01 Danse macabre.mp3", and a filename search for "cab" didn't find it. I think that is because "cab" is in the middle of the string, and is not a "word" as defined above. As an exercise, I renamed one of my own files as "01 Danse macabre.mp3", and as expected, searching for the filename "cab" didn't find it. However if I then capitalized the "C" so that the filename was "01 Danse maCabre.mp3" then a search for "cab" did find it:
"Cab" starts a new "word" because of the case change. The search itself is case-insensitive, so that searching for "cab" finds "Cab".
This shows the problem, but doesn't fix it. As a work-around, instead of using the top-right search field to type in "cab", instead hit command-F to bring up the search window. Change the initial "Kind is Any" line to "Name contains". Now you get a true "contains" search instead of a "word begins with" search. When I searched for "cab" this this way, I did find "01 Danse macabre.mp3":

"Limit Capture/Export File Segment Size To" doesn't work

Similar Messages

Maybe you are looking for