Limit Document types by plant and user

Hi,
I need to limit document types between two plants meaning a user should be able to use only one document type when buying from another plant but have all other types available for use generally.
Example when user A from plant 1000 buys from plant 2000 he can only use UB Purchase Order type but for all other plants he can use any document types.
Points will be awrded.

You can limit the document type for each buyer in the Authorisation profile for  the buyer. This is done by  SAP Authorisation team. T code: PFCG
Please contact your SAP Authorisation Team or SAP BASIS Team.
G.Ganesh Kumar.

Similar Messages

  • Limit document types for transactions

    Hi Sapper's,
    Besides using a validation, is it possible to limit document types for certain transactions Eg. FB60 - Doc Type KR and KA and KG ONLY.
    Cheers

    Hi
    You can create a transaction variant for FB60 using trancode SHD0, select the document type and make it output display only.
    This would prevent the users from using a different document type.
    Hope this helps
    Deepa

  • Restrict purchase order document type at plant level

    Dear,
    I would like to restrict the purchase order document type at plant level,
    Plz help me.

    Hi Dear,
                 at the Plant level you have to use the below given Authorization Objects for the Users in different Plant
    M_BEST_BSA     Document Type in Purchase Order
    M_BEST_WRK     Plant in Purchase Order
    Give the values of the respective Plant and Order Type for the Respective Users.
    For more help you can contact your Security Team.
    but before that please check out in the T-Code SU24, if both the Objects are active, if not then ask the ABAP person to activate them.
    Hope it helps you.
    regards,
    yawar Khan

  • Document Type ZI + Plant number

    Hi,
    Please suggest where i can check linkage between document type NB/ZI & plant number; as for one specific plant & for a particular material type, I am getting purchasing Document type NB; but I want to change it to ZI.
    Thanks & Regards,
    Rohit Guliani

    Hi,
    Do you mean that you have set the default document type to ZI and yet it sometimes defaults to NB but only for one plant and material type combination?
    Or do you WANT it to do this so that if the user enters one Plant and a certain Material type you WANT it to default to NB.
    The document type defaulted cannot be different for a certain plant / material type. To control this by plant would need a user exit or modification but what happens if there is more than one plant on the PO (or more likely more than one plant / material type combination) what would you expect the system to do?
    Steve B

  • How to create a new document type for PO and Requisition

    Hi All
    Can you please help me with the steps of creating a new document type for PO and PR. Also the steps that need to be update for the procure pay cycle to work properly. 
    Once the document type is been created. I want to create the PO referecing the new PR and PO document type.I am new in MM.
    Thanks, Ros

    Hi,
    1. You can create new PR and PO docu types at the following path:
    For PR docu type:
    First you need to create number range for docu type or you can use existing number range also. The path for creation of no. range is
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Number Ranges
    Then create PR docu type at below path and assign no. range to PR docu type here only
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types
    For PO docu type:
    Follow same procedure as mentioned for PR docu type. Path is
    SPRO>Materials Management->Purchasing->Purchase Order->Define Number Ranges
    SPRO>Materials Management>Purchasing->Purchase Order->Define Document Types
    If you want to create PO referencing new PR docu type, link the PR docu type to PO docu type at below path:
    SPRO>Materials Management->Purchasing->Purchase Requisition->Define Document Types--> Link purchase requisition - document type
    Regards
    Chetan

  • Retriggering Release strategy for PR with Document Type, Company Code and Price Range as Characaterstics

    Hi Friends,
    I have a issue to fix. The issue is releated to PR.
    There are some PR's in the system which has wrong release strategy picked up or wrong approvers picked up due to some congif change. now that the config changes are rectified correctly, we need to find a solution to correct the PR's which got affected due this.
    I have to retrigger the release strategy for all the affected PR's.
    The characterstics which we have consider for release strategy is Document Type, Company Code and Price Range.
    Can anyone suggest how can we retrigger the PR in bulk or individual to all the affected PR's, so that it picks up correct release strategy as per new config changes.
    Regards,
    Manjunath K

    Hi,
    Refer the discussion to triggers release again on release code addition/change in release strategy.
    release code is changed on PR release strategy - old PR can´t be approved
    Regards,
    Biju K

  • Different Document types for Reciepts and payment-Cash Journal

    Hi Gurus,
    Please tell me how can we make different document types for reciepts and payments in cash journal and where we need to assign it??
    Please revert asap.
    Thank You

    Hi
    While posting the transactions by using FBCJ T.Code u can select the Receipts or Payments or Expenses then the documents will be genereted.  FBCJ02 is the T.Code for no.range there u can assign the no.range intervels.
    Shammi

  • Overview fields used per document type in MM and FI

    Hello All,
    iIs there a possibility to get an overview of all fields used (mandatory, optional etc.) for each document type in MM and FI? I want to create a list which fields per document type are used in both MM and FI and which are only used in MM or FI.
    Thanks in advance for answers!

    Hi,
    You can point out all the fields with
    1) At the time of defining Screen lay out for purchasing (NBF) in MM for GR-IR Control.
    2) or you can tally which tables are conjugated with MSEG from SE11.
    Might this will clear you.
    regards,
    Ninad

  • Mapping of invoice document type in SRM and Backend

    hi,
    I need to map invoice document type in SRM and backend. We are in SRM5.0.
    e.g. when we create no PO invoice , we need to select document type from drop down  and that document type should be replicated to backend invoice document type.
    1. There is no list in drop down of invoice document type ( RE/RN)
    2. How it will be replicated to back end document type when enter document type instead of selection?
    If anyone came across this, pls let me know.
    regards,
    Rahul Mandale

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Assign document type to plant?

    Hi!
    Document types are assign to sales areas but i need to assign one specific document type to only a few plants of this sales area. ¿How could i do this?
    Regards.
    Eduardo

    Hi guys,
    Thanks for your answers. Pramod what i want is to assign a document type to just a few plants that belong to the same sales org. (in this sales org. there is other plants to which i don't want to assign my document type). The idea is that when i create a sales order with this Order type only a few plants are available.
    Roberto i beleive that the listing/exclusion funtions is just for materials.
    Sudarshan i already talked to my abap'er and if there is no other option through customizing will do that.
    Thanks again.

  • New document type for Physical and material documents

    All SAP Gurus,
    I have created new document type in OBF4.
    How to view that Document type in OMBT (number range for for Physical and material documents)
    Regards,

    Hi,
    on the menu bar of trxn  click "number range object" in that go into overview you will get number range object overview  of every documment type or else do shift F7.
    Regards,
    Archit

  • Purchasing Document Type (Purchase Order and Contract)

    Dear all;
    I have created two different PO  document type in development Server .I have transferd sandbox for further testing ,There i hve change the number range interval status to "0" after that I have created a PO with new document type in the sand box ,it is working fine but after save ,system showing some error msgs. as Below
    Express document "Update was terminated" received from author "JOYDEEP"
    What may be the problem.kindly suggest .
    Thanking you;
    Regards;
    Joydeep Mukherjee

    This update termination may be due to some configuration or may be due to some development which is resulting in the dump. Go to SBWP - your SAP inbox, there you will see a mail, open that mail to see the details for the reason for this update termination.

  • How to get Document type , number , part and version from mm01

    Hi ,
    Can you help me out so that i can able to get the document type , number , part ,version from mm01. Iam using exit EXIT_SAPLMGMU_001 but i was not able to get those details inside the parameters . I not able to get any values inside wmara parameter. ?
    Regards,
    Sivaganesh

    Hello Siva,
    Try with the below 2 BADI's
    BADI_MM_MATNR
    BADI_MATERIAL_CHECK
    Regards,
    TP

  • Delivery document Type of Inbound and Outbound delivery

    Hi,
    Please suggest standard delivery type for inbound and outbound deliveries.
    Regards,
    shreya

    Hi,
    Standard delivery types:
    inbound delivery EL
    outbound deliveries LF
    subcontracting LB
    project LP
    replenishment NL
    returns RE
    without ref LO
    Regards,
    MdZ

  • Assigning of PR document types to Network and WBS Element

    Dear Experts,
    We have created Purchase Requisition document type as ZPRJ for Project system to create a automatic PR. When we run Project Builder the Auto PR will get create for Network by selecting the PR document type ZPRJ. But PR for WBS element instead of selecting ZPRJ it is selecting NB document type. Our requirement is whenever PR generate through Project builder it should create for doc. type ZPRJ.
    Please let me know how to assign the ZPRJ PR document type for WBS Element. For both document type NB & ZPRJ we have maintain same number ranges but it should select only ZPRJ document type for WBS element & Network.
    Thanks & regards
    Dhanu

    OPTT will help you.
    Regards

Maybe you are looking for

  • Backing up an external hard drive, one half for PC (FAT32), other for MAC?

    Hey people, I've just bought a Lacie 1tb eternal hard drive which I would like to partition into two halves - in theory one half for the PC and the other half for the MAC, backing up all data held on the mac using Time Machine. Is this possible? If s

  • Add a new cell

    add a new cell in a column before other cells that have content in them.  In excell it is very easy to do.

  • Adobe Reader 9 download error

    I recently tried to download an upgrade for my Adobe Reader.  Now, when I try to open the program I get "error 1606 - could not access network location %APPDATA%\".  I have tried to uninstall with no success. I tried to repeat the download process bu

  • Photoshop Web Gallery

    The Web Gallery pages created by Photoshop also creates text boxes for description, Title so on and so on. But when you add text to the individual pages, the descriptions and so on don't appear when posted to the web. What gives? Can anyone offer som

  • PCA Number ranges - GB02 & GL20.

    Hi, If we use New GL PCA and classic PCA is deactivated, should we still maintain the following number ranges GB02 u2013 You need document types if you want to either plan profit centers directly or perform plan assessment or distribution. GL20 - You