Limit effect not limiting

I open an audio clip in STP, add a limiter, make adjusts, save, then when I open it in FCP it doesn't seem like there's any difference. So I double click on the clip it opens in STP but the Limiter is no longer there. What am I doing wrong? Shouldn't there be a limited effect active and aren't saved files changed to be a .stap file?

My bad.
Mac Pro
2.66 quad core
7300 GT
3 gigs ram
250 gb hard drive (70 used)
250 gb external glyph hard drive - connected via FW 800 cable
It's weird since both the 3-way color corrector and matte are both bold which from my understanding are effects that can be rendered real time.

Similar Messages

Limiter effect not limiting

Hi
Example: When I apply a Limiter effect with a -5.5 limit to a clip, the audio meter still shows it rising above that. What's up with this thing, I've applied it to a number of clips, it doesn't seem to function with the precision that a limiter filter that looked exactly the same in STP did. It seems to have some effect but my ears and eyes say it's not doing it's job.
Suggestions?
best,
elmer

The bulk of the session should be backwards compatible, but some effects from newer releases will not load in earlier versions, as you've noted. For compatible effects, you should see the correct parameter values, though the preset name used will not be displayed. (Presets are a trigger to adjust parameter values, not stored as a parameter itself.)

Changed Ulimits values for the Oracle user and getting error -bash: ulimit: max user processes: cannot modify limit: Operation not permitted when logging in.

I'm trying to increate the ulimits for max user processes and open files for the oracle user. I've set the values in limits.conf, /etc/profile and in oracle's environment scripts. Now when I log in as oracle I get the below errors. If I change the ulimits back to the original values errors go away but ulimits aren't changed.
login as: oracle
[email protected]'s password:
Last login: Fri Mar 6 09:56:02 2015 from mtkadmin12
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
-bash: ulimit: max user processes: cannot modify limit: Operation not permitted
[oracle@servername ~]$

Thanks for the update.
I modified the /etc/security/limits.d/90-nproc.conf and added a line for oracle and also modifed the oracle.sh file. The ulimits are setting correctly when I su - oracle but they are still wrong when sshing in as oracle.
[root@mtkdevorap11d-1 ~]# su - oracle
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 94371840
max memory size         (kbytes, -m) unlimited
open files                      (-n) 65536
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$
[oracle@mtkdevorap11d-2 ~]$ ssh mtkdevorap11d-1
Last login: Mon Mar 16 13:04:16 2015 from mtkdevorap11d-2.conveydev.com
You are logging onto an Oracle system.
Kickstarted on: 2014-06-05
[oracle@mtkdevorap11d-1 ~]$ ulimit -Ha
core file size          (blocks, -c) unlimited
data seg size           (kbytes, -d) unlimited
scheduling priority             (-e) 0
file size               (blocks, -f) unlimited
pending signals                 (-i) 1030982
max locked memory       (kbytes, -l) 64
max memory size         (kbytes, -m) unlimited
open files                      (-n) 4096
pipe size            (512 bytes, -p) 8
POSIX message queues     (bytes, -q) 819200
real-time priority              (-r) 0
stack size              (kbytes, -s) unlimited
cpu time               (seconds, -t) unlimited
max user processes              (-u) 16384
virtual memory          (kbytes, -v) unlimited
file locks                      (-x) unlimited
[oracle@mtkdevorap11d-1 ~]$

Why do we need work managers if the self-tuning pool is not limited ?

Hi all,
AFAIK, the self-tuning thread pool in WLS 10.3 is not limited in size, meaning it can grow indefinitely.
On the other hand, work managers only make sense when there's a shortage in resources, and we need to decide what are the priorities to get a thread and CPU time.
So if, for example, I have a system that's only 20% busy even on the heaviest load, the work managers will never "kick in" actually, since there's "enough for everyone".
Thanks for sharing your thoughts!

If you have more than a single application deployed and only have the default work manager, all apps compete equally and are also equally unable to be tuned in their thread usage.
If you instead have a unique work manager for each app, you can limit each app's consumption of resources - if needed - or alter each work manager's treatment / tolerance of hogging threads. For instance, an app that maintains sockets versus a webapp.
Having separate workmanagers allows you to tune the apps individually. If needed.

-bash: ulimit: open files: cannot modify limit: Operation not permitted

Hi all,
i´m preparing a linux 64bits environment to install Oracle 10g R2. I´m following the installation manual and there say that:
Depending on the oracle user's default shell, make the following changes to the default shell startup file:
For the Bourne, Bash, or Korn shell, add the following lines in the /etc/profile file (or the /etc/profile.local file on SUSE systems):
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
Ok, I did it, so when execute the follow comand I get a error like this.
tetis:/etc # su - oracle
-bash: ulimit: open files: cannot modify limit: Operation not permitted
oracle@tetis:~>
Can anybody help me ?
Regards,
Wander (Brazil)

The limits for -u and -n are defined in limits.conf, it looks like the -n section is not working (-u is already 16384), just to double check, show us the output for:
$ more /etc/security/limits.conf | grep oracle
oracle              soft    nproc   2047
oracle              hard    nproc   16384
oracle              soft    nofile 1024
oracle              hard    nofile 65536
$ more /etc/pam.d/login | grep pam_limits
session    required     pam_limits.soEnrique

IPod 1000 Notes Limitation

My name is Drew and I work at Delicious Monster Software. I've contacted AppleCare on this subject and was dead-ended ("please contact corporate by mail") after being escalated three times. I'm trying this outlet as well to see if there if anyone else can shed some light on this.
It appears that the iPod has a 1000 note limitation. That is, you can add as many plaintext note files as you would like into Extras/Notes on the iPod hard drive, but only 1000 will be displayed on the iPod during use.
This appears to be a completely unacknowledged and undocumented limitation of the iPod. What would be awesome is to have a tech support article on this limitation (even if only to acknowledge that such a limitation exists).
There is only one mention of this behavior that I have found on Apple's website at all, at http://developer.apple.com/hardware/ipod/ in the Note Reader User Guide PDF (fourth paragraph). While useful, it is hidden away in a PDF and not targeted at consumers.
I would love to have that paragraph as a tech support article.
If there anyone here that has the authority to get the wheels moving on an article being written or has a suggestion for another outlet that I can take this to, it would be greatly appreciated by both Delicious Monster as well as our customers.
Thanks,
Drew, Delicious Monster Software

Good news. I was able to get in contact with some people at Apple (through contacts in Developer Relations) and get the wheels turning on a support article update. See the new mention of this known issue at:
http://docs.info.apple.com/article.html?artnum=93951
I've also documented this in the new Delicious Monster support site:
http://www.delicious-monster.com/help.php?id=8#article
Obviously we'd prefer that there be no limit like this, but having it documented is certainly a great step too.
If you want the iPod to be able to hold a larger amount of Notes (for Delicious Library or otherwise!), be sure to let Apple know:
http://www.apple.com/feedback/
Thanks to all,
Drew Hamlin
Delicious Monster Software

Upgrade to Server 2012 Standard (user limit fix) - Not Supported?

Which WD Sentinel do you have? The process is only supported and applies to the WD Sentinel DS5100 and DS6100 since they have different hardware than the DX and RX series.

There aren't any huge differences in the operating system when going from Server 2012 R2 Essentials to Server 2012 R2 Standard. The biggest peice is that users need to purchase the correct licencing before making the swap. Western Digital appears to have created a video to assist users with the transitions from the stock operating system to Server 2012 Standard. (Upgrade DS6100 to Server 2012 Standard) The upgrade process itself based on the video and mention of the upgrade in the administrator's/owners manual gives the appearance that such an upgrade is endorsed/supported by WD. Appearances, however, can be deceiving. Midway through the process I ran into a problem (Raid Config Problem) and attempted to contact customer support over the phone. After being elevated up to a second level of support I was told over the phone that because I had made changes to my unit that it was no longer in its original confiuration, I had voided my warranty, and I am on my own until I restore the unit to its original configuration. I mentioned to the tech that I don't think I did anything outside the bounds of what I should be doing based on the video (link above) and the following exerpt from the administrator's manual: "Windows Server 2012 R2 Essentials supports up to 25 users and 50 devices. When your business needs exceed the limit, you can purchase an additional license and upgrade to Windows Server 2012 R2 Standard." The response I received was fairly surprising to say the least. I was directed to page 80 GPU/GPL section: "Modification of or tampering with the Software, including but not limited to any Open Source Software, is solely at your own risk. Western Digital is not responsible for any such modification or tampering. Western Digital will not support any product in which you have or have attempted to modify the Software supplied by Western Digital." In my specific case, I knew what the issue was and more specifically, I knew exactly what I needed to resolve the issue (the installation binaries for the Raid Configuration Utility). The tech on the phone said that since I had modified the OS, that I needed to reach out to Microsoft for assistance (which makes no sense since the software in question is Western Digital's) and refused to provide me with any information on how I might obtain the installation software. Ultimately I resolved the issue on my own by pure happenstance. I encourage anyone even thinking about buying one of these units for a medium to large business to be very leery and way your options carefully. I'd be happy to provide my case # to anyone at WD who would like to contact me and/or look at the particulars of my problem.

I cannot log onto sites that require my log in and password. I get no error message, fire fox just goes back to the same empty log in screen. this problem is not limited to one site. I reloaded firefox with same results.

When i type in my log in and password and enter, the site either returns to the blank screens or does nothing. This is not limited to one or two sites. all of my financial institutions, electric company, insurance companies, even trying to register here so that i could ask this questions. In this situation, when i hit the register button, nothing happend, its as iff the button is inactive. i had to go to IE to register and post this question. I just tried to enter my new log in and pw on the screen in fire fox and nothing happens. Some sites behave differently when i hit the submit or log in button. the information seems to be transmitted but the screen comes right back to the original log in screen with blank fields. there are no error instructions that something does not match or is missing. then i go to IE and it works.
This started a few weeks ago. I cant identify anything that was added around that time but i tried a system restore and that did nothing. i deleted fire fox and downloaded the latest version 3.6.13 and it is still happening

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

SRM 7.0 - Unconfirmed PO limit items not showing up when creating Invoice

Hi Guys,
For PO standard items, when creating an invoice and is unconfirmed, these items still show up in the invoice screen and the invoice gets created with the status 'Waiting for preceding document'. For unconfirmed limit items, these items do not show up at all in the creation of the invoice and displays an error. My question is how will I make the unconfirmed limit items scenario work just like the standard items scenario whereby instead of the unconfirmed limit items not showing up and generating an error, they will show up and have the invoice created with the status 'Waiting for preceding document'?
Thanks in advance!

Is this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team

Is there a size limit to Notes on iPhone 5?

Hi,
My wife makes long notes on her iPhone 5, but some of her notes just disappear. Is there a size limit on Notes on iPhone 5?
I cannot see any other reason for them disappearing.
cheers Parisferra

Hi,
We don't get any error messages - basically we have converted an XML structure to a std::wstring which we then convert to PMString and store as persistent data on the document. Somewhere along the way the string has been truncated which means that when we try to read it back into an XML structure it fails. It sounds like this isn't an issue with storage in the document, it must be being truncated before it gets into the document.
I just wanted to check what the limit was in the document (I haven't been able to find that in any documentation) so that I could trap any strings that were too big before they were written into it.
Thanks,
Dan

-bash: ulimit: max user processes: cannot modify limit: Operation not permi

Hi,
Installed 10g Forms&Reports only on RHEL 3ES.
Modified /etc/profile according to Oracle's documentation:
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -n 16384
ulimit -p 16384
else
ulimit -u 16384 -n 16384
fi
fi
But when I logon to the server, the following message shows:
"-bash: ulimit: max user processes: cannot modify limit: Operation not permitted"
What is the problem here?
Thanks
Stephan

Hi,
Installed 10g Forms&Reports only on RHEL 3ES.
Modified /etc/profile according to Oracle's documentation:
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -n 16384
ulimit -p 16384
else
ulimit -u 16384 -n 16384
fi
fi
But when I logon to the server, the following message shows:
"-bash: ulimit: max user processes: cannot modify limit: Operation not permitted"
What is the problem here?
Thanks
Stephan

Excise jv through f-02 but effect not coming in j2iun

excise jv through f-02 but effect not coming in j2iun

Hello,
Excise JV should routed through J1IH
Regards
Mani

Lighting Effect not work in CS6*

Why Filter/ Render/ Lighting Effect not work in CS6?
It's not work only in CS6 Beta or in anything else :-/. It's Useful with me

A bit more information would be helpful. What is happening on your system when you go to lighting effects?
What system are you running on? What video card are you using? Are you using the most recent driver?
Do check our system FAQ as GPU is requried for lignting effects to work properly.
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Pattie

After Effects not working in Mavericks

Is anyone having issues with Adobe After Effects not working in Maveriks? Premeire, Photoshop, Audition all work, but not AE. No update from Adobe available.

This update is ONLY FOR MAVERICKS. You can't update through Creative Cloud, to prevent users of other operating systems from installing it.

In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

Ok no one has been able to help me so far this is it. I NEVER had these problems with photoshop CS6 extended edition!
The best i can do to describe the dissappearing filters( from iteratrions of Photoshop CC for the last year to now) and pattern overlays were called marble, stones and concretes. where can aI find a list of pattern overlays?
will it do any good to repost to all on this forum?

Limit effect not limiting

Similar Messages

Maybe you are looking for