Limit Group Labels

Hi forum,
i'm facing a problem with group labels in line charts.
I group values by a timestamp (one timestamp for every 10 minutes).
If i want to see values for a larger interval, for example 3-4 days, group labels overlap themselves as you can see in the picture which is linked below.
http://img6.imageshack.us/img6/8589/peaks.jpg
Now my question is if there is a possibility to limit those group labels.
For example that only every 6th, 12th group label is shown on the vertical axis
This way it would have a way better clearness when looking at the dashboard.
thx in advance
alex~
Edited by: user12338029 on 11.12.2009 01:42

Making selectively skip the groups may not be a good idea as it might lead to misinformation on the chart. Anyway, this option is not available in BAM.
To reduce the number of groups for your case, you can use continuous time series. In the vieweditor, in the step where you choose "Group by" field, clicking on field will open a time series UI on the right side. By default, Continuous time series is ON, you can just increase the default quantity from 1 to say 30. This will group the data of 30 minutes together, there by leaving very few groups in your chart.
Thanks,
Vishal
BAM Dev

Similar Messages

  • Is there a way to allow text wrapping on the outside (parent) group label IN SSRS Bar chart?

    Hi,
    I am using SSRS 2012.  I have a series of charts that have multiple category groups.  When I preview the chart, everything looks great unless the category group label is too long.  In that case it just gets cut off.  I've tried allowing
    "wrapped text", changed interval values,font size for Y AXIS but that seems to only affect the inside (child) category group.  Is there a way to allow text wrapping on the outside (parent) group label?
    I am expecting AREA VIII  BUT it shows AR on y axis.
    I need to fix it asap.

    Hi Sukhjeet.BI,
    Actually, I can reproduced the issue in my local Reporting Services environment. If there are multiple category groups on the chart, the child category can be wrapped, but the parent category would be truncated. Based on my research, this behavior looks
    like by design. Usually, the best practice is to limiting label length and number of items, use a smaller size label font or enlarge the chart size to get the chart to display properly.
    If you have any concerns about this in Reporting Service, I would suggest you submitting a wish at
    https://connect.microsoft.com/SQLServer/Feedback.
    Connect site is a connection point between you and Microsoft, and ultimately the larger community. Your feedback enables Microsoft to make software and services the best that they can be, and you can learn about and contribute to exciting projects.
    Thank you for your understanding.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Alligning Group labels to center in Matrix with Group report

    Hi there!
    I am facing difficulty in alligning the group labels produced using matrix(cross tab) query in to center across direction. As it only stretches to first column of the underlying Matrix Across Column and Cell. Please help me in solving this prob.
    Thanks in advance.
    Imran

    For Simple HTML output, you can only get horizontal lines out of Reports. You will lose all vertical lines as well as other graphical objects (eg: polygons, polylines, etc.) This is because these objects are not supported natively within HTML.
    However, for HTMLCSS, you should be able to get a lot closer since rectangles are supported. Though again; polygons, polylines, etc. are not supported.
    Not sure what is happening to your text, possibly an issue with browser settings or you may need to reduce the font size in Reports to get what you want.
    As has already been suggested, for better WYSIWYG output for the web from Reports, PDF is the way to go.

  • Hide group labels on a 3D_CUBE_GRAPH

    Is there a way to hide all of the group labels across one of the axis lines on a 3D_CUBE_GRAPH?
    I tried all of the following and only the values listed on the other axis disappear.
    set_custom_property('BeanArea',1,'SHOW_LABELS','x=false,y=false');
    set_custom_property('BeanArea',1,'SHOW_LABELS','x=false,y1=false');
    Thanks,
    michelle

    Michelle,
    call
    set_custom_property('BeanArea',1,'HIDE_AXIS','X');
    to hide the x-axis labels
    set_custom_property('BeanArea',1,'HIDE_AXIS','Y1');
    for the y-axis
    or
    set_custom_property('BeanArea',1,'HIDE_AXIS','XY1');
    to hide both
    Frank

  • AdvancedDataGrid.styleFunction not applies for hierarchical group label

    Hi
    I have hierarchical data in advanced data grid.
    I am using AdvancedDataGrid.styleFunction to set font style to the rows.
    The style is getting applied only to the child rows.
    Its not getting applied to group label.
    Please help me to style group labels.
    Thanks
    Niyazar. 

    AdvancedDataGrid.styleFunction itself working for group label also.
    Problem was with my if conditions inside the styleFunction.
    Thanks Sathyamoorthi. But I didnt tried rendererProvider.

  • Generic "course-group' label in search results

    When searching on our "What Great Bosses Know" podcast for the Poynter Institute - the results display the label "course - group" in the Collections column instead of the actual titles.
    This began to occur after the recent redesign of the admin tools. The title appears to display correctly elsewhere.
    Is this a bug or are we doing something wrong in our collection set-up?
    Thanks
    Damon
    null

    I also just noticed that the author field is empty in the same podcasts. I do not handling the uploading but the author believes she is following the same process she has used for months.

  • How to enable group label selectable on combo box?

    When we use the combo box, we can group the items as following
    group 1
    item 1 1
    item 1 2
    group 2
    item 2 1
    item 2 2
    How to enable user select the group 1 instead of select both item 1 1 & item 1 2 ?
    In the jsf rendered result, group 1 & group 2 just a label and not selectable option, we want change it to selectable option.
    Thanks

    When we use the combo box, we can group the items as following
    group 1
    item 1 1
    item 1 2
    group 2
    item 2 1
    item 2 2
    How to enable user select the group 1 instead of select both item 1 1 & item 1 2 ?
    In the jsf rendered result, group 1 & group 2 just a label and not selectable option, we want change it to selectable option.
    Thanks

  • How to Limit Group to Reach Host at Specified Port

    Is it possible on the CVPN30XX platform to limit users in a group to reaching only a certain host at a particular port number? I know I can create a network list that limits traffic to a particular destination. But then I want to further limit the traffic to just one specific port - e.g. users would be allowed ssh to a bastion host if they passed authentication. Thanks much.

    I found the filters and rules needed to do this. Never mind. It's just been a while since I needed to do this.

  • Suppress If Duplicated On Group Label

    I'm using Crystal Reports 2008
    I have a report that is to display just the totals (not the details) for each group.  To that end, I put the fields to be totaled in the detail line and used Insert Summary to create the total fields for each group (there are two groups).  I then hid the detail section, as well as the Group Footer sections (1 & 2).  Finally I dropped the group field names into the Group Header 2 line.  It works well, but I get the same Group 1 field repeated for each item in Group 2.  Sort of like this:
    Group 1
    Group 2
    Total 1
    Total 2
    0008
    Section A01
    123
    234
    0008
    Section A02
    53
    245
    0008
    Section A03
    152
    453
    0010
    Section A01
    34
    112
    I'd like to have the 0008(number) label (in the example above) be suppressed if duplicated, sort of like this:
    Group 1
    Group 2
    Total 1
    Total 2
    0008
    Section A01
    123
    234
    Section A02
    53
    245
    Section A03
    152
    453
    0010
    Section A01
    34
    112
    I tried the "Format Field" option and selecting "Suppress If Duplicated", but that did not seem to have an effect.
    Thanks!
    Matt

    Sorry, change the code to:
    WhilePrintingRecords;
    numbervar array arr;
    numbervar x;
    if not({Group_Name} in arr) then
        x := x + 1;
        redim preserve arr[x];
        arr[x] := {Group_Name}
    else
    0;
    -Abhilash

  • Checkbox Group Labels

    Hi
    I am Created checkbox group called "Gender".Automatically there are 3 checkboxes created with this with labels as "Lebel1","Label2","Label3".Now i want to change "Label1","Label2","Label3" as "Male","Femele","NotSpecified".At design time how to change these labels.I tried to change the "texts" property.can anybody help me?
    Thanks
    Prasad

    Hi Armin,
    I am trying to create a Checkbox group. I created a value attribute and binded it to simple datatype containg list of items in enumeration. Then I binded the Checkbox group "texts" property with the value attribute.
    In the layout wizard all items are visible but at runtime none of them is visible.
    Cardinality of node containing the value arrtibute is 0..n. I have checked it for 1..n also.
    Please tell me what could be the possible reason behind it.
    thanks in advance!

  • Grouping labeled textframes

    Hi scripters
    i cant group two labeled textframes, where i am wrong in the below script
    x = app.activeDocument.textFrames.item("Fig");
    y = app.activeDocument.textFrames.item("Cap");
    g = app.activeDocument.groups.add([x,y]);
    ERROR
    Adobe InDesign
    JavaScript Error!
    Error Number: 30477
    Error String: Invalid value for parameter 'groupItems' of event 'add'. Expected Array of PageItems, but received nothing.
    Line: 21
    Source: g = app.activeDocument.groups.add([x,y]);
    OK  
    thanks in advance
    regards
    a r u l

    x = app.activeDocument.textFrames.item("Fig");
    y = app.activeDocument.textFrames.item("Cap");
    g = app.activeDocument.groups.add([x,y]);
    ERROR
    Adobe InDesign
    JavaScript Error!
    Error Number: 30477
    Error String: Invalid value for parameter 'groupItems' of event 'add'. Expected Array of PageItems, but received nothing.
    Line: 21
    Source: g = app.activeDocument.groups.add([x,y]);
    are you sure that x and y "contains" TextFrames ?
    InDesign's message is clear - Expected Array of PageItems, but received nothing - x or y or both are "empty"
    robin
    www.adobescripts.co.uk

  • Contact Groups Labeled "(null)"

    In the contacts area of my IPhone there is a button that will take you to "Groups." In "Groups" and under the subhead "All ICloud" there is a long sequence of entries that are labled "(null)" and a couple that are labled "Group Name." All of these entries contain no contacts. How do I get rid of them?

    Download Easy Group. It is totally free. Lauch it. Click on Edit. Click on red-cross next to your unwanted group. That's all. http://itunes.apple.com/fr/app/easy-group/id461469079?mt=8
    Rémi
    Note: As I am Easy Group developper, I may receive some form of compensation, financial or otherwise,from my recommendation or link.

  • Limit Group Policy to specific OS

    Hi. I'm sure this is a common scenario, but I would like to hear the forum members opinion as to the best way to do this. I have a Domain (currently Server 2003 DC) consisting of Windows 7 and Windows 8.1 workstations. I've created a GPO to control what
    Windows 8 "modern" apps are available to users, using a PowerShell script. I only want it to run on Windows 8 machines, but I want it to be per user (in other words, I have it set in the user configurations). Do I put all those workstations into
    a separate OU and link the GPO there, or do I use a wmi filter?
    Thanks!

    Thanks, Don for your reply. Indeed I am using that setting. I haven't actually tried either way yet, but yes, the idea is to put all the Win 8 machines into their own OU and use Loopback processing (merge). Or I could simply go with a wmi filter.
    I was wondering what would be the better way to go.
    Hmm, if you go down the WMI Filtering road, you'd need to link the GPO to the OU where your user accounts reside (since it's a \User Configuration\ setting that you're doing).
    Otherwise, put the machines into an OU, link the GPO there, and enable Loopback processing. Replace or Merge is up to you/your requirements, i.e. if you need to override other inherited or linked \User Configuration\ settings..
    Loopback processing can cause other unintended side-effects, to be on the lookout for those, plus, Loopback causes an extended processing time (due to the nature of loopback processing), so if you already have a long-ish processing time / logon time, you
    might want to consider that.
    An efficient WMI filter might be less-costly (processing-wise).
    Test out both approaches in your environment to see which suits your situation - both are valid approaches.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Customer and customer group with different credit limit.

    HI All,
    we have customers belonging to a group. Every single Customer of the group must have its own credit limit and the group must have another credit limit too. Example.
    Customer 1: Limit u20AC 100.000
    Customer 2: Limit u20AC 350.000
    Customer 3: Limit u20AC 400.000
    Group 1: Limit u20AC 700.000
    I used the customer hierarchy and now each customer have the high-level customer "10000":
    Group 1 = Customer "10000" (Account Group 0012)
    so Customer 1 + customer 2 + customer 3  limit can not exceed limit group 1 (u20AC 700.000)
    How can fix ?
    Thanks in advance.
    Antonio

    thank you for your reply
    in my system, each customer is paying, but the group 1 no. The credit limit is not shared but different. If CLI1 exceeds its limit, I lock the sales orders, but if an individual does not exceed the limit I have to check the sum of CLI1 CLI2 CLI3 exceeds the limit of u20AC 700,000.
    example:
    CLI1: Limit u20AC 100,000
    CLI1: credit exposure u20AC 55,000
    Group 1: Limit u20AC 700,000
    CLI1 CLI2 CLI3: credit exposure u20AC 670,000
    New Customer Order CLI1: value u20AC 35,000
    The sales order is blocked because it does not exceed the limit CLI1 (100,000 u20AC) but exceeds the limit of a Group (700,000 u20AC)
    Thanks
    Antonio

  • Mess. Type ET01: No labeling material group is assigned to material

    Dear Gurus,
    I want to print message type ET01 but when I try the system give me following message: "No labeling material group is assigned to material "
    What do I have to do to make my material group "labeling"?
    Waiting for your comments,
    Warm regards,
    Fuffo

    Hi Fuffo,
    I am getting the same error when I am trying to print my material id labels.
    The error reads:
    No labeling material group is assigned to material &1
    Message no. WJ024
    Is there something missing in the material master ? I have had a good look at the config (a couple of times) and the master data and am not able to make out what is it that I am missing.
    Your input will be very helpful.
    Thank you in advance.
    Regards,
    Pardeep.

Maybe you are looking for