Limit Internet but still access network

I just purchased airport extreme base and am trying to configure my network. I have a hard drive connected via usb. My goal is to have my eMac and my Mac Mini access both Internet and my network hard drive, wired and wireless respectively. Also a laptop and PC both running XP SP2 to access network hard drive but NOT internet, wirelessly.
Is it possible to disable Internet for the PC's on the airport side through the airport utility?
Thanks

I'm not sure how to do it with the AirPort Extreme configuration, but you could do it by configuring the PCs with appropriate LAN static IP addresses without including DNS server entries.

Similar Messages

Allow Internet but block other network connections ?

I am using my Airport Extreme (b/g) only for connecting my Wii/Internet radio devices to the internet. I also have a NAS and my computers attached to the network but because the AE is set to WEP and I am worried it is too easy for someone to break in to it and get access to my shared data in the network.
My network is:
Netgear WNR3500L wireless router connected to:
DSL Modem
Netgear ReadyNAS
Netgear Powerline Adapter
Airport Extreme
So can I allow internet but no other network connections through the AE ?
Neil
Message was edited by: Neil Coxhead UK

My advise is..
If you do not have at least two game consoles behind this router, turn off UPnP in the router.
This is done in the router at Advanced -> UPnP.
By game consoles, any two..
#1 For example: X-box, PlayStation.
#2 A special type of computer with no keyboard or mouse. And it is usually connected to a TV.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

I have checked around the internet, but still can't find any answers. How can I prevent incoming mail from interrupting the music I am listening to on my iPhone? That 1-second muting function drives me insane, especially when a lot of mail is coming in.

I have checked around the internet, but still can't find any answers. How can I prevent incoming mail from interrupting the music I am listening to on my iPhone? That 1-second muting function drives me insane, especially when a lot of mail is coming in.

If you want to hear your music on iPhone without interruption, switch Settings > Airplane Mode: ON.

I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?

I have a macbook pro and apple tv2. My problem is that my hard drive is full. What is my best option to empty movies off of my macbook but still access them through atv2?

ok. I do have a time capsule but if I move itunes on to it how do I sync my ipods and iphone? Or can I have my Itunes account on both and just move my movies to the time capsule?

Vpn client can access internet but cannot access internal network

I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....

enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80

Use Extreme as router only (no Internet) but still connect wirelessly

I have a separate BT Home Hub 4 which I can connect to wirelessly. I want to use the Extreme just for connecting to a NAS drive.
Is it possible to set up the Extreme as a router only but still via wifi?
Kind Regards

Ok, thanks for clarifying that for me.
You can configure the Extreme to broadcast its own wireless network that network clients can connect to in order to gain access to the attached NAS device.
However, as it is a separate network, clients would have to "switch" networks between accessing the Internet via the Home Hub or accessing the NAS via the Extreme.
The AirPort's default configuration will support this. Note: You can use the AirPort Utility to ignore the warnings that will appear when the Extreme is not connected to the Internet.

Windows XP hooks up to internet but NOT local network

I have an Airport Base Extreme with a local network that includes my machine and an old B&W G3 and my son's iBook G4. My other son has an IBM Thinkpad running Windows XP SP2. We've looked through the discussions and he's been able to wirelessly hook up to the internet but he doesn't show up on my local network. He's used the info from http://www.ifelix.co.uk/tech/1011.html to help him hook up but he still doesn't show up on my network and he is repeatedly disconnected from the internet. Any ideas?

I'm running the WEP, that's all. My husband just got a new Dell laptop (from work). He was able to hook up to the network without a problem but I can't see him on it either. I can see the Mac and iBook that are on the network but not the Windows machines. Also, when I click on the airport icon in the menu on my iMac, I only see my network. My husband's PC sees other networks that are in our neighborhood.

How To: Lock a folder to prevent it being deleted but still access it?

How can I lock a folder to prevent it from being moved or trashed but still have access to move/add folders within that folder?
The scenario is that we have a daily jobs folder and a final jobs folder. The daily jobs folder was accidently moved into an active job folder. I want these folders locked down so this cannot happen but when I use the lock feature nothing can be moved in or out of that folder.
Under OS9 the locked box specifically said "cannot move, rename or delete this item" yet you could add or delete items to that folder all day long.
If I try this with OSX I need to authenticate each bloody time! I just want to lock a folder down and have it accessable by anyone, anywhere, anytime without the need to type a password 80 times a day. HELP ME PLEEZE
Mac OS X (10.4.3)

Read only access will prevent the addition or removal of items in the folder you set the permissions on; the folders below that one have different access settings, which can be less restrictive than those for the folder you set it on.
For example, if folder A contains B and C, and B allows Read & Write access but A allows Read Only access, items can be added and removed from B, but B itself cannot be moved out of A, and other items cannot be moved in to or out of A. If a folder your account has Read access to is inside a folder which your account doesn't, you can use the Finder's Go to Folder command in the Go menu to navigate to it if its path is known.
(15304)

Country code unlocked but still no network coverag...

I bought T-Mobile in Chicago USA , but now I want to use my mobile in INDIA.I had called the T-Mobile customer care today. They gave me the unlock code for my mobile nokia 5300.I entered the unlock code and it said " sim was not restricted " instead of "sim 'is' not restricted".
Does this mean that my mobile was already unlocked. I remember I tried it once in USA also after asking T-Mobile customer care, but still it is showing no network coverage??
Please suggest what shall I do so that I get network coverage in INDIA.Is there any setting changes I need to do in my mobile??
Mobile
Make and Model : nokia 5300
Moderator note: IMEI removed.
Message Edited by dazz19 on 05-Oct-2008 05:01 AM

I had same problem. I bought nokia 5300 T mobile from malysia and now I want to use it in Bangladesh.......But I did not get any kind of network...I u can sloved your problem pls let me know... is my ID.
Thank you
Moderator note: Email address removed
Message Edited by prodigy on 04-Oct-2008 12:47 PM

Convert Dial-up accounts to Internet-only but still access vis POP

I have 5 AT&T Dial-up accounts that I would like to convert to internet-only. Some of these accounts were first established in the late 1990's, and some were set up in th early 2000's. I have the account numbers for each, and all of the passwords and security questions & answers. All of these accounts were converted (if that is the right word) to Yahoo in May of 2010. Each account has one or more sub-accounts. I have seen forum posts that indicate you lose the ability to access email accounts via POP, which will not work for me as these are corporate users who want to use Outlook to access their email. I would like to know who I can talk to (not the typical run-of-the-mill customer service person who really knows very little) to establish the process I need to go through to move from Dial-Up to Internet-only accounts.

Hi,
In System Preferences>Network, highlight or Show Internal Modem>PPP tab>PPP Options button... Prompt every xx minutes.

Airport Extreme is connecting to the internet, but still flashes orange.

I've set up an Airport Extreme and it is connecting to the internet, however its light still flashes orange on the unit and in Airport Utility ver. 6.2 and it has a red circle with a "1" in it similar to the alert notification on an iPhone for messages and email. What does this mean? As I said, I can connect devices to it and connect to the internet, so it seems to be functioninbg fine. So why isn't the status light green?

If the problem does not resolve itself by powering down your network equipment, a complete reset of all your equipment is justified. Power down the modem and "hard reset" the Extreme, followed by reconfiguring it using AirPort Utility.
Power down your modem whenever you change what is physically connected to it. Make it a habit.
BensonFam wrote:
Originally it had the "double nat" issue but when I went to bridge mode my whole set-up failed.
That should probably be resolved as well. More information is required regarding this failure.
Sometimes, an attempt to reconfigure a minor setting will result in what appears to be a total meltdown followed by extreme user frustration. In that event, starting over with a "hard reset" and subsequent reconfiguration is generally the best way to proceed.

Jst got a iphone 4s and my itunes is not picking it up at all i have tried many things from the internet but still not working

Please help ... Stressed new iphone user!!!!!!!!!! lol.
i got a new iphone 4s on friday, people told me i needed to connect this to the itunes asap.
i have had a ipod for 4 years and had no problem connecting to itunes before.
at first my computer would not find the iphone so i looked up tips from apple and other internet sources ... after deleting temp files my computer picked up my iphone but itunes didnt... i kept getting a pop up when going on to itunes saying "this iphone cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install itunes again.
So i did i did this serveral times and the pop still keeps coming up and everytime i reinstall itunes i have to delete temp files for my computer to pick my iphone up. i contacted apple and an adviser sent me a link to follow to delete itunes and other in a order which i did several times and still not worked.
i tried my iphone on my mums computer and it has picked it up but in my mums itunes i want my itunes as i have purchased many songs. now my ipod wont even register to itunes. i also get a pop up from windows saying Host process for windows services stopped working and was closed ... i ahve followed all the advice for that even a clear up on my computer and still nothing. you can even find apple mobile device anywhere on the computer tho my mobile is charging when plugged in. i have tried everything that apple reccomends anyone able to help
Thank you

Try this article if you haven't already
This is the only possibility that came to my mind when reading about your issue:
"If an iPhone, iPad, or iPod touch is not recognized in iTunes on Windows, the Apple Mobile Device Service (AMDS) may need to be restarted"

How do I keep my media on an external hard drive but still access it in iTunes?

I just recently purchased a new Macbook Air and I had my itunes media library on an external hard drive. How do I access my itunes media on the macbook air from the external hard drive without transferring all the media onto my macbook air? I also want to be able to add and download media to my itunes and have it saved on my external hard drive. I have been trying to figure this out for weeks and need some assistance. Any advise would be greatly appreciated. Thanks in advance.

hey, basically i had the same problem as you. i had all of my itunes on an external hard drive and just bought a macbook pro, so here is what i was told to do....plug in the external hard drive to your MBA and then when you open itunes hold down the option button while you click and hold it down till you see a pop up window, it will ask you what library you want to use, click choose library and choose the itunes file that is on your external hard drive. and then all of your stuff will be in the itunes.
what i have seemed to run into though is, when the external hard drive isn't plugged in itunes won't open unless you choose another library or plug in the external hard drive. - my question is this, should i open another library on my macbook pro's internal hard drive so i can at least look at itunes when i don't have my external hard drive connected. my old macbook did this, it would point to another library on my macbook and i would still be able to see all of my media but couldn't play it without the external hooked up, is there a way to do this on lion?
i hope i was able to answer your question sam and hopefully can have my question answered too.
thanks!
- sorry sam, don't mean to hijack your thread but hopefully it will help us both - i don't want to store any media )movies, music, podcasts, apps, any of that stuff on my macbook pro's hard drive, so say there is a way to get itunes to open without my external hooked up and i can still see my media, or not see my media and i want to download a song or a app that i see when i am not near my external....what is the easiest way to get that file onto the external and not have it taking up space on my macbook pro's hard drive? sorry for all the long questions
Message was edited by: thenumbersarebad - thought of one more thing - sorry

I am attempting to restore from icloud on new 5c from old 5c and has taken 4 days locked, plugged in, and connected to secure good internet, but still not finished. What can I do?

I have already cleared the content and settings from the phone twice and tried to start completely from scratch.
I also already tried backing up the phone onto my computer then restoring then using the computer back up via USB connection.
In addition, my phone displays as almost full (its an 8G) yet I have 4 songs (8.2MB), no books, 48 apps (1.98GB) - which seems like a lot of space used for apps, 96 photos (84.6MB), Documents&Data (917MB) and that's it! It just has a huge section that displays as "other" (1.62 GB) then 780.2 free.
I'm OBVIOUSLY not a tech person, but it seems like having some apps and 4 songs and 90 photos shouldn't mean your phone is so full I had to erase all the content just to do the software update for it to allow me to back it up! What is the issue there? Those numbers don't seem like they add up to anything near 8GB, but again I'm sure I'm missing something.
Any help is appreciated. My other phone was exactly the same one and I had no such problems so perhaps this one is just faulty?

Error 3 or 1669
Is your phone jailbroken?
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Check for outdated or modified software
Related errors: 1015, “The required resource can't be found.”You might see these error messages if any of these are true:
Your device has a beta version of iOS.
You're trying to install an earlier version of iOS (downgrading).
Your device has unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device to the latest version of iOS.

Connects to internet but not local network

My AX worked fine for the past year. While traveling I disconnected the AX and set the wireless mode in Airport Admin Utility to 'Wireless disabled' and then connected an iMac by ethernet wire for our housesitter. All worked well. On my return I plugged in the AX and reset the Wireless Mode to 'Create a Wireless Network (home router)'. All appeared to work well for the past week. Until today.... when I tried to print wirelessly to a printer connected to my server in the office outside our home. The MacBook Pro was unable to find the printer or the server. It was formerly able to this with no problem.
The MacBook Pro can connect to the internet by the AX but not to my local network.
When I choose 'connect to server' from the Go menu I'm unable to locate the server. I determined that if I enter the local address in the 'server address' window I am able to connect but remain unable to print. My former protocol was to choose the 'browse' button and choose from a list of possible computers (their are a number of Macs possibly on the network).
If I take the MacBook Pro across the driveway to the office and plug into my network the computer finds the server and the printer with no problem.
I've done a hard-reset twice - to no avail. And attempted a factory default re-set 3x but don't believe it worked since the green light didn't flash 4x as expected - it came on briefly and then turned amber while it re-started, but when I used Airport Set up Assistant all my former settings were there and the same password I had entered so I don't believe it reset to factory defaults.
Yow!
I'll really appreciate any assistance.
paul sokal

Thank you for sharing your experience. I am sure linksys will take care of bug(if any) you mentioned.

Limit Internet but still access network

Similar Messages

Maybe you are looking for