Limit number for new field

Hello there
Anybody know what is the limit number for new field in each record type?
My client wants me to create about 200 new fields in Account record type.
Is it possible to do so?

Hi, You can refer this
https://secure-ausomxdsa.crmondemand.com/docs/1.10.0.1080.0.00/enu/help/CustomFieldHelp.html
-- Venky CRMIT

Similar Messages

Data not loading for new Fields InfoObjects from DSO to InfoCube

Hi Gurus -
               I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
Here is the New Scenation:
     DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
-Sonali

Hi,
Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
Regards,
Mani

Value is not populated for new field in RSA7 from PI Interface

Hello Experts -
We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
Thanks for any inputs/comments.

Hi ,
Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
Regards,
Ramnaresh.P.
Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

Value not populated for new field - in RSA7 for PI interface in BW

Hello Experts -
We have 3.5 bw and PI 7.x. we have a PI interface in bw working in production and now we enhanced the interface with a new added field. I mapped the new field in transfer rule/ modified update rules/ods and regenerated the soap datasource in bw. The user has uploaded the file in FTP with this new field added. PI picked the file processed and the value for new field got populated and pushed the data to BW. In RSA7, i dont see the data filled in for this new added field.
Not sure, if i missed any steps, in BW, so that I can populate the value for this field.
Thanks for any inputs/comments.

Hi ,
Replicate the Data source in BI and activate it using RS_DATASOURCE_ACTIVATE_ALL program.
Regards,
Ramnaresh.P.
Edited by: ramnaresh porana on Apr 26, 2011 9:43 PM

Skype local calling number for new plymouth new ze...

hi can i please get a local skype number for new plymouth new zealand i brought a hastings one as it was 06 area code but its a toll call for me to call it

cdogg wrote:
hi can i please get a local skype number for new plymouth new zealand i brought a hastings one as it was 06 area code but its a toll call for me to call it
Hello
If your preferred location is not listed it means that Skype Numbers aren't available there.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Credit Limit Issue for new customers

Dear Experts,
Iam ABAPer and recently shited to SD.
I have a issue with credit limit check for new customers.
For example, Credit control team set Rs1000 limit for new customer.
Core team created Sales Order with Rs 3000 and they created subsequent documents successfully like Delivery and Invoice.
System not performing any credit checks before making Delivery note means not showing in VKM1 tcode.
After creating first invoice for the new customer and system is checking credit limit for all the Sales orders whcih were created after first invoice (Billing).
Can you please help me how to overcome this issue.
Note: Credit Control Team dont want to use VKM3 tcode to release the order.
Thanks
Shaik

Hi Shaik Basha,
--Go to T.Code XD02 for customer & check in Sales Area under Billing Tab whether Credit control Area is assigned or not.
--Check in T.Code VOV8 & select your Sales Document check whether credit limit & credit group is assigned or not.
--Go to T.Code OVAK u2013 Assign check credit-D Automatic credit control & credit grouyp -01 for credit group for sales order.
--Go to T.Code OVAD u2013select your delivery document & Assign delivery credit group-02 & 03 goods issue.
--Go to T.Code OVA7 u2013 select your item category & check mark credit active.
--Go to T.Code OVA8 u2013 Automatic credit control u2013 Double click on the line items & check which credit type are use using Static or Dynamic credit
--Mention B for Error message as reaction & check mark on the status block.
--Now Raise Sale Order in VA01 & check the process.
Please let me know if your problem is solved
Regards
Pradeep

SAP Note number for new indian budget

Can anyone plz provide me Note number for new budget. will really appreciate.

hi
The Sap Note no is 1361644
for budget changes
Rgds
Hemant V. Mahale

User Exit for New Field Creation & Updation at Sales Order Level

Hi All,
I want to create one new field in Additional Data B Tab of Sales Order.
Also when the sales order is created with reference to a Contract, that Contract number to be updated in that field.
Which user exit need to be used for this field Creation & Updation at the time of order creation? Is it MV45AFZZ?
Pls suggest.
Rgds,
Senni.B

Hi
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Regards
Madhu

WSDL missing xsd:annotation & xsd:appinfo tags for new field

Hi,
I was recently asked to add a new field to a service interface. I made the changes to the Data Type and Mapping as appropriate and after activating those changes went to the Sender Agreement to save the WSDL in a file so I can handle it to our business partner (I created the file on the IB under Sender Agreement-->Display WSDL). During the testing of interface using webservice navigator response gave an exception. We checked the WSDL file and the new field is there but it's missing the <xsd:annotation> & <xsd:appinfo> tags (which all of the other fields have).
Here's an extract of how the WSDL looks, the new field is URI, ORG_NM2, ORG_NM3:
<xsd:element name="IV_J_1IPANREF" type="xsd:string">
                  <xsd:annotation>
                     <xsd:appinfo source="http://sap.com/xi/TextID">
                     c6a198762dd811e48dab0c84dcced6b4
                     </xsd:appinfo>
                  </xsd:annotation>
               </xsd:element>
               <xsd:element name="URI" type="xsd:string" />
               <xsd:element name="ORG_NM2" type="xsd:string" />
               <xsd:element name="ORG_NM3" type="xsd:string" />
As you can see the annotation and appinfo tags are missing for the new field URI ORG_NM2, ORG_NM3,. I think this might be the reason why they don't see the new field when they upload the WSDL to their system.   Is there something else I need to do for the WSDL to be generated correctly?
Please suggest urgently.
Neeraj

Hi Luis,
You are right fields are coming correctly but when I am testing the wsdl using webservice navigator or SOAP UI I am getting the below exception:
com.sap.engine.services.webservices.jaxrpc.exceptions.XmlUnmarshalException: XML Deserialization Error. XML Parser has thrown exception while parsing input. See nested exception.
Error Log:

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Application:EXCEPTION_DURING_EXECUTE:
at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:765)
I though that since missing of these two <xsd:annotation> & <xsd:appinfo> tag may be the ssue because after adding new fields this was the only difference in WSDL.
Regards,
Neeraj

Use old product number for new product.

Dear all,
I have to manage the following case.
From a defined date the engineering releases a new product that will substitute an old product.
The marketing doesnu2019t want to change material number and would you like to use the old product number also for new product.
This solution has a great impact for planning because there is not possible to distinguish the old product stock from new product stock.
Could you help me?
Regards
Flavia Borselli

Hi,
I think one opption is discontinuation that was invited for such cases I thnk. You can set the new part number as the follow-up material of the old one - in this case planning will run smoothly hopefully...
That would mean that they should use new part number but there would be some connection between the new and old one...
Split valuation is another tool to make difference between batches from different origins when the material number is the same. But you wrote batch management is not active...
If you use WM you can store the new & old goods separatly but I wouldn't prefer such solutions...
BR
Csaba

Require input agreement number for new defined PO document type

Hi guys,
We have defined a new purchase order type.
This order type can only be converted from contract.
How can we process that? I cannot find this setup neither in documen type nor screen layout.
Jason.

Hi
If you feel that system should not allow you to proceed further wihtout without flagging the return check box at line item level, you have set it in configutaion and the step is as follow..
First you have to creeate a new field selction key under Materiaal Management --> Purchasing >Purchase Order>Define Screen Layout at Document Level
Select NBF field selection and click on Copy icon
Change the Field slection key code and description as you like, say for example ZNBF
Now double click on created field selection by that you will get list of field selection group
Double click on GR/IR Control, system displays list of fields with different options of selection and by default you can find all the fields are have been checked under optional entry
Check on Requried Entry check box of field "Return Indicator" and save it.
Now the next step is assigning the newly created field selection key (ZNBF) in to docuemnt type
For this, click on Define Document Type, select the newly created field slection key for the newly created PO document type for return and save.
Now when you try to create PO with the newly created document type, system will not allow you to save the document until unless you check the retrun item check box.
I hope this will help..
Best Regards..

How to implement PCCD001 exit for new field in AENR table

Dear experts,
I am implementing PCCD0001 exit for a new field in AENR table secnario below.
Tcode CC31/CC32/CC33 required additional field which stores value in AENR table. in AENR in implemented include(CI_AENR) and added new field. After i implemnted PCCD0001 screen exit for CC31/CC32/CC33.
in that two function exit are there, one for passing data to screen EXIT_SAPMC29C_001
another for getting data from screen EXIT_SAPMC29C_002.
which table or structure i use to place field in screen exit to pass data to EXIT_SAPMC29C_002, in this function i don't have import parameter.
Adv. thanks,
Venkey

Hi sekhar,
Your Requirement can be implemented by OVS(Object Value selector) This is the custom search help .So that you can define on what basis the value has to be fetched.
Look at the below link
http://wiki.sdn.sap.com/wiki/display/WDABAP/ABAPWDObjectValueSelector(OVS)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/606288d6-04c6-2c10-b5ae-a240304c88ea?quicklink=index&overridelayout=true
You need to use the component WDR_OVS.
It has 3 phases
In phase 1
     You will fetch the value from input field to F4 help dialog box.
In phase 2
     You will generate the search results , in this phase look for the input value given in field 2 and accordingly generate search result for the field 3.
In phase 3
     The selected value will be returned to the original screen.
Regards
Karthiheyan M

Files for New Field Service Laptop

Server is Oracle Database Lite 10g R3 (10.3.0.2) for Linux and arhitecture is: Oracle Application is install on machine 1, Oracle Database on machine 2, Oracle Lite Database and Mobile Server are install on machine 2.
I want to install to Mobile Server application "new field service technician". I found the CSML.zip on Oracle Application (Machine 1) in folder csm/html/download.
I run java command to run installation manager
java -Xms32m -Xmx1536m -DJTFDBCFILE=<DBC_FILE_NAME> -DAFLOG_ENABLED=TRUE -DAFLOG_LEVEL=STATEMENT oracle.apps.asg.setup.InstallationMgr <DB_HOST_NAME> <DB_PORT_NUM> <DB_SID> <APPS> <APPS_PASSWORD> MOBILEADMIN <MOBILEADMIN_PASSWORD> <PROD_TOP> <INI_FILE> <ZIP_FILE>
In this point, I can see a new application in Mobile Server Administration webpage on Mobile Server.
I acces my server http://myserver:port/webtogo, I'm loggin with administrator user, I acces "mobile manager", In new page oppened, I access my server, then applications link and "new field service laptop" application. Here can see "properties", "access", "data subsetting", "files" and "add war file".
In "Files", I don't have any files.
How can populate with files this application?
Thanks
kale.

The following docs should get you started populating and using this application:
Mobile Field Service 12.1.1 Release, Install and Implementation Notes
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=846572.1
500 Internal Server Error After Adding ALTERNATE_DIR Line in webtogo.ora
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=844410.1
How To Publish Mobile Field Service Applications For 12.1.1.
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=846429.1
Oracle Mobile Field Service Implementation Guide Version 12.1.1
http://download.oracle.com/docs/cd/B53825_02/current/acrobat/121csmig.pdf
Regards,
-Michael

PCUI 4.0, Search Help Required for New field

Hi everyone
I am working in CRM 4.0 Sales Order application
We created a new field in CRM sales Order in Header level in SAP GUI through EEWB.
The search help for the new field is working fine in SAP GUI. We want to add the same field with F4 help functionaliity in PCUI as well.
The field has been added in structure CRMT_BSP_SLS_OD1_General. It also shows domain value for the field however Origin of input field ie empty
The field has been added in PCUI and is successfully showing data inputted in SAPGUI
However we need search help functionality for the field
i tried these two steps
1) i checked on domain value checkbox and changed the field from input to dropdown. However the dropdown is empty in PCUI. Whenever i check box domain values for some field then all the possible values in SPA GUI are displayed in PCUI, however this is not working here.
2) I put Value_table in F4 of the field
This is also throwing up empty values
Am i missing something in this case
Please let me know how to go about it
TIA
Asad

Hi Frederic
Thanks for your response
I am not sure what is meant by regenerating the field group in this case
I added the entries for my view in the field group and generated the layout of the field group (If this is what you mean)
The field is working fine. I am able to save values to the field and able to see values saved in GUI.
I haven't linked search help of the field in PCUI
I am not sure how to go about it.
I used the data element in the structure for the field.
The data element has Domain entry in <b>Entry Help/Check</b> of the structure
If i check the Domain Value checkbox in my field group then the domain values should be available in dropdown if the field is dropdown
However i am not able to see the possible values of the field (It is present in SAP GUI)
Does something else needs to be done in this case
TIA
Asad

Enhancement BC Datasource for Master Date - no data for new fields

Hello,
I have a problem. Maybe someone can provide a check list.
I made an enhancement for datasource 0COORDER_ATTR via SAP Exit. The problem is that i do not get data in BW for the new fields but no error occurs. the extractor checker delivers the new data.
the following points i already checked:
- datasource replicated and infosource activated
- "Hide field" and "Field only known in customer exit" are not checked for the new fields

Hi Stefan,
I guess you need to maintain your transfer structure. Edit your transfer rules and click on tab 'datasource/transfer structure'. Move the new fields from the right table (datasource) to the left table (transfer structure). Click on tab transfer rules and map the new field. Activate the transfer rules again.
regards
Siggi

Limit number for new field

Similar Messages

Maybe you are looking for