Limit on Page-By-Item in Disco Viewer

Hi There.
Is there a limit on page by items on Disco Viewer.
It works fine but as soon as i add more than one page by item no matter the result i select it defaults to <All>
Regards

Hi,
Do you mean that it doesn't filter the data according to the value you selected ?
I am not aware of a limitation on the page items and for sure you can have more than one.
Personally I have seen workbooks running under viewer with more than 5 page items.
What version of viewer do you use? maybe you need to patch it up...

Similar Messages

  • After adding list view into the web part page, the items and list control ribbon is not activated.

    I created new webpart page and added one list view web part into the page.
    However I can see the ITEMS and LIST tabs on ribbon area, but all the buttons are deactivated.
    Do I have to activate any feature for this or any settings are needed for the webpart?
    I already have full permission for this site.
    For your easy understand I added the screenshot.

    Thanks for you advice.
    However I am currently using the context menu and edit link in the view.
    My Client keep complaining about the ribbon is not activated even thought it works fine in the SharePoint 2010.

  • Found 0 results for While browsing eBay, when I watch or bid on an item, and later view it again, many inches of white space appears before item appears. If I delete the clear recent history box, the pages will come up as they should for several times, th

    While browsing eBay, when I watch or bid on an item, and later view it again, many inches of white space appears before item appears. If I delete the clear recent history box, the pages will come up as they should for several times, then go back to a lot of extra white space. How can I prevent this? Thank you, Rick in English
    == This happened ==
    Every time Firefox opened
    == About a month ago

    As stated in 1.:
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    Obviously, it will not harm your computer provided you follow the instructions. However, if you don't post your results in the thread where you were given those instructions, then the person helping you cannot help you further. As he asks at the end, "please post the test results on Pastebin, then post a link here to the page you created."

  • OBIEE:Page Items in Table View

    Hi, I m new in obiee
    I m facing problem in adding page items in table view,
    can u please tell me how to add it?
    Thanks,
    Rohit.

    yes, you are right...(Raghu)
    I am creating tabular report where i want to add page section in table view like pivot table....
    thanks,
    waiting for your reply..
    Rohit..
    Edited by: rohitdesai on Feb 5, 2010 2:12 AM
    Edited by: rohitdesai on Feb 5, 2010 2:15 AM

  • How can I get Disco Viewer to remember the user's final filtered worksheet?

    Hi every one:
    How can I get Disco Viewer to remember the user's final filtered worksheet?
    Each time the users login they have to make several operations (drillings, pivots, etc) to get their reports customized as they want. I wonder if is there a chance I could configure Disco Viewer in order to remember the last worksheet layout, and set it as the initial worksheet the next time the user login?
    Thanks in Advance
    Jorge

    Once your users have customised the report to their requirements, they can add the URL of final data diaplay screen to their favourites menu in the browser.
    Next time they want to run the same report, they can access the URL saved into favourites, they'll just need to enter their password to run the report when prompted.
    I know that this works with Oracle Applications user id's, and that the URL "remembers" User Name, Oracle Apps Responsibility, Workbook Name, and Paramteters Used, Table Layout Customisations, and Page Item selections... so in theory it should record Drill information too.

  • How can I get Disco Viewer to remember the user´s final filtered worksheet?

    Hi every one:
    How can I get Disco Viewer to remember the user's final filtered worksheet?
    Each time the users login they have to make several operations (drillings, pivots, etc) to get their reports customized as they want. I wonder if is there a chance I could configure Disco Viewer in order to remember the last worksheet layout, and set it as the initial worksheet the next time the user login?
    Thanks in Advance
    Jorge

    Once your users have customised the report to their requirements, they can add the URL of final data diaplay screen to their favourites menu in the browser.
    Next time they want to run the same report, they can access the URL saved into favourites, they'll just need to enter their password to run the report when prompted.
    I know that this works with Oracle Applications user id's, and that the URL "remembers" User Name, Oracle Apps Responsibility, Workbook Name, and Paramteters Used, Table Layout Customisations, and Page Item selections... so in theory it should record Drill information too.

  • Performance Issue with Crosstab Reports Using Disco Viewer 10.1.2.48.18

    We're experiencing Performance Issue (retrieving 40000 rows) with Crosstab Reports Using Disco Viewer 10.1.2.48.18 ( > 01 Minute , executing "Building Page Axis" or executing a Refresh).
    Are there parameters to tun (in pref.txt file) , in order to reduce "Building Page Axis" execution ?
    Note : We've got the same performance problem , using Discoverer Desktop 10.1.2.48.18.
    Thank's in advance for your Help.

    Hi
    Well if the same issue occurs in both Desktop and Viewer then you have your answer. It's not the way that Discoverer is running the workbook its the way the workbook has been constructed.
    For a start, 40000 rows for a Crosstab is way over the top and WILL cause performance issues. This is because Discoverer has to create a bucket for every data point for every combination of items on the page, side and top axes. The more rows, page items and column headings that you have, the more buckets you have and therefore the longer it will take for Discoverer to work out the contents of every bucket.
    Also, whenever you use page items or crosstabs, Discoverer has to retrieve all of the rows for the entire query, not just the first x rows as with a table. This is because it cannot possibly know how many buckets to create until it has all the rows.
    You therefore to:
    a) apply sufficient filters to reduce the amount of data being returned to something manageable
    b) reduce the number of page items, if used
    c) reduce the number of items on the side or top axis of a crosstab
    d) reduce the number of complex calculations, especially calculations that would generate a new bucket
    If you have a lot of complex calculations, you should consider the use of a materialized view / summary folder to pre-calculate the values.
    Does this help?
    Best wishes
    Michael Armstrong-Smith
    URL: http://learndiscoverer.com
    Blog: http://learndiscoverer.blogspot.com

  • How to set a page template for news detailed view?

    Is there a way to set a page template for the detailed view of the news module?
    I have a page template setup and added the {module_announcement,,,,,} to the page. When the news item is clicked it always opens the default template - is this how it is designed to work or is there a way I can specify it to use a different page template?
    Dave.

    Hey Dave, See the image below:

  • How to limit the number of items in a KPI Status list web part?

    How to limit the number of items in a KPI Status list web part? There is no paging option for Business Category Status list or any limit can be made by changing the Item limit in default view unlike other SharePoint List web parts. So How to achieve it?
    Kindly help.
    Regards,
    ZA
    zzzSharePoint

    Hi,
    According your post, I know you would like to set the item display limit in Status List web part.
    In the web part, the number of items to display is based on the view which you selected when configuring the web part. The default view for status list is status list view.
    However, I am not able to limit the items’ display number of the status list view. After changing the items limit, the list item displayed would not match the number specified by Item Limit. Thus, it is not possible to limit the number
    of items in the Status list web part.
    It could be a potential issue in SharePoint 2010.
    We will log this issue to our suggestion box. As after the submission, we may not have any time guarantee when the fix may be released, but it may come out on next cumulative update.
    Appreciate your time and efforts.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Page detail items

    Is there a way to set page detail items to show a particular value as default?
    For example, page detail item 'Month' contains 'Jan 05', 'Feb 05' and 'Mar 05'.
    Can Discoverer report be setup so that default value for 'Month' is the latest month available?
    Thanks!

    I am also experiencing problems in Viewer for a worksheet with over 15 page items, some of which has over 500 values for selection.
    1) For each page item value selection, the 'Execution Query Process' page pops up. It drove my users crazy after four pop-ups. Is there anyway to for discoverer to complete all page item selections first, then refresh query to show the 'Execution query process' page just once; or better yet, is there a way to suppress the query progress pop-ups all together?
    2) Sometimes we select a page item value, other times we select '<All>' to get all values; similar to like '%;. For page items with over 400 values, the Viewer display about 40 followed by ...more. We have to click more for more ...more. At times, we go through 12 search pages to reach the desired page item value or the value <All>.
    Is there a way to put <All> on the top of the list as default, and permit a search pattern for page item value, which changes in each run?
    Thanks in advance.

  • How to limit the number of items from RSS using XSLT

    Hello,
    I am using plsql to read contents from RSS, basically a simple RSS reader.
    I would like to somehow want the feature to restrict the number of items in the RSS feed, say I would like to display only the first 5 items.
    How could I achieve this?
    Any help is highly appreciable.
    Thanks in advance.
    Regards

    Hi,
    According your post, I know you would like to set the item display limit in Status List web part.
    In the web part, the number of items to display is based on the view which you selected when configuring the web part. The default view for status list is status list view.
    However, I am not able to limit the items’ display number of the status list view. After changing the items limit, the list item displayed would not match the number specified by Item Limit. Thus, it is not possible to limit the number
    of items in the Status list web part.
    It could be a potential issue in SharePoint 2010.
    We will log this issue to our suggestion box. As after the submission, we may not have any time guarantee when the fix may be released, but it may come out on next cumulative update.
    Appreciate your time and efforts.
    Thanks.
    Tracy Cai
    TechNet Community Support

  • How to remove the item in Did.View .

    Hi,
    How to remove the Work sheet item in Dis.viewer.By using drill to related u can add the item into the worksheet.i want to remove the same...
    Regards
    Manikandan.

    Hi Manikandan
    Just use the back button on the browser. The page will return to the original query. That's the whole point of why Viewer is based on HTML.
    Bets wishes
    Michael

  • Page 0 item vs. Application Item

    Hello All,
    Is there any advantage of using an application item over page 0 item .
    My requirement is to store a value in a global item so that I can access it across all pages in the application . The value of this item is computed from an SQL query.
    Now my concern with creating an application item is if at a later stage I have to change the query that computes the value, and then if i have to patch that change to production , I will have to send the entire application(2 hrs to import) since application items are shared component . But if I create an item in page 0 , I need to only patch the page .
    1) Is there any way I can patch application items without having to send the whole application ?
    2) Is it okay to use page 0 items (hidden) instead of application items ?
    Thanks,
    Dippy

    I've used page 0 items for "globals" with no issues. A few things I like about them:
    1) They're visible in the standard tree view, without having to go to the shared components section. Much easier to remember that they're there. (This is the same reason I like using dynamic actions for page-level javascript, rather than tucking it into the page attributes.)
    2) I can use the standard page item source processes. Application items are just harder to deal with--you either have to use an after-login process to set the value, or create your own application/page process to do so. Which is harder to track/remember.
    3) Inherent "global" naming convention. When I'm creating a page item, APEX helps me remember to use the PX_* notation; there's nothing like that for application items. Which means I can (and probably will) tend to get sloppy--not to mention any other programmers I have to work with. Once you understand page items and page 0, however, it's trivial to remember that P0_* means global. (Incidentally, is there a recommended standard convention for naming application items? APP_* would be obvious, but there's risk of colliding with APEX there...A_*? G_*? GLOBAL_*?)
    And as has been noted, they're available to javascript, though I haven't needed that particular feature (yet).
    -David

  • Assign from Page 0 items

    I have a page 0 item. Value gets assigned there when the user selects a value from a LOV in the same page. User will now populate the values in the rest of the page (say page 19, where page 0 is now part of). Now when user will click Create button to save the information. The page 0 item will now get assigned to a Page 19 item. I used the following stmt in a process which executes on submit
    :P19_SRC_ID := :P0_SRC_ID;
    But nothing is getting assigned .
    Any idea?
    Thanks
    Deb

    Why don't you describe everything you have on the page in question (P19) and everything you have on P0. I have a feeling we are missing something, but without a more comprehensive view of what you are trying to do and the contents of the page, it's more a guessing game than anything. Alternatively, you can post a sample application for us to look at and attempt to assist you with.

  • Is it possible to enable Web Cache gzip compression for 9iAS Disco Viewer?

    Hi,
    Sorry for repeating this question. But it's very urgent and we don't have any idea yet how to solve / work around it:
    To keep it short: Is it possible to use Web Cache gzip compression for pages rendered by 9iAS Discoverer Viewer???
    Our scenario: We have some Discoverer Worksheets which we want to access by ISDN dial in (64 kbit/sec). An average page needs 2 minutes only for sending the html/javascript output rendered by Disco Viewer to the client browser.
    To speed up the response time when users use this slow connection, we want to activate Web Cache gzip compression.
    The problem: But even when we enable Web Cache for Discoverer (configuration.xml and Web Cache rules), Web Cache doesn't compress pages generated by Discoverer Viewer. We found out that the generated responses contain the "content-disposition" HTTP-Header entry. Are we correct that this is the reason why there is no gzip compression? AND DOES ANYONE KNOW A WORKAROUND (p.e. configure Disco not to add the content-disposition http header)???
    Best regards,
    Matthias Scherer

    Matthias,
    Have you raised this as a TAR with Oracle Support? If you've got a specific question, and you need a definitive answer, raising a TAR is the best way to proceed.
    regards
    Mark Rittman

Maybe you are looking for