Limit PO price changes are not replicated to ECC backend

Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the  field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.

Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

Similar Messages

  • BPs with Business Partner (Gnrl) role are not replicating to ECC

    Dear all,
    I want to replicate BPs with General Business Partner role from CRM to ECC, all sold to pary (Role) customers are replicating to ECC perfectly.
    Kindly help. your help will be greately appreciated.
    Best regards
    Shravanthi R

    Hi Srinivas,
    Could you please eloberate that, how and where can I maintain filter settings for BP roles.
    I have reached R3AC1>BUPA_MAIN>FILTER SETTINGS-->SELECTED SOURCE SYSTEM AS 'OLTP'.
    Don't know how to proceed further, Please help.
    Your help will be appreciated.
    Best regards
    Sharavanthi R

  • GG configuration - Changes are not replicating from Source to Target

    Hi,
    I am new in golden gate configuration. I have set up GG between two oracle databases to replicate the changes from source to target database.
    But when I update or insert in HR.JOBS table in source, it is not propagating to target. I didn't find any error in error log.
    Could you please help me to suggest the configuration I did wrong here?
    SOURCE Database information
    ===========================
    Database Name : SRISRI(10.2.0.1) , Hostname : ggs-1.cu.com(Linux 64 bit)
    Oracle GoldenGate Delivery for Oracle Version 11.1.1.1.1 OGGCORE_11.1.1.1.1_PLATFORMS_110729.1700
    GGSCI (ggs-1.cu.com) 2> info all
    Program Status Group Lag Time Since Chkpt
    MANAGER RUNNING
    EXTRACT RUNNING EXT_1 00:00:00 00:00:01
    EXTRACT RUNNING PUMP_1 00:00:00 00:00:08
    GGSCI (ggs-1.cu.com) 3>
    Error Log
    =====================
    2012-02-12 15:08:34 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: EXTRACT EXT_1 starting.
    2012-02-12 15:08:34 INFO OGG-00992 Oracle GoldenGate Capture for Oracle, ext_1.prm: EXTRACT EXT_1 starting.
    2012-02-12 15:08:35 INFO OGG-01513 Oracle GoldenGate Capture for Oracle, ext_1.prm: Positioning to Sequence 55, RBA 11345936.
    2012-02-12 15:08:35 INFO OGG-01516 Oracle GoldenGate Capture for Oracle, ext_1.prm: Positioned to Sequence 55, RBA 11345936, Feb 12, 2012 3:00:14 PM.
    2012-02-12 15:08:35 INFO OGG-00993 Oracle GoldenGate Capture for Oracle, ext_1.prm: EXTRACT EXT_1 started.
    2012-02-12 15:08:35 INFO OGG-01055 Oracle GoldenGate Capture for Oracle, ext_1.prm: Recovery initialization completed for target file /app/ggs/trail/local_trail_1/ta000001, at RBA 1307.
    2012-02-12 15:08:35 INFO OGG-01478 Oracle GoldenGate Capture for Oracle, ext_1.prm: Output file /app/ggs/trail/local_trail_1/ta is using format RELEASE 10.4/11.1.
    2012-02-12 15:08:35 INFO OGG-01026 Oracle GoldenGate Capture for Oracle, ext_1.prm: Rolling over remote file /app/ggs/trail/local_trail_1/ta000001.
    2012-02-12 15:08:35 INFO OGG-01053 Oracle GoldenGate Capture for Oracle, ext_1.prm: Recovery completed for target file /app/ggs/trail/local_trail_1/ta000002, at RBA 1025.
    2012-02-12 15:08:35 INFO OGG-01057 Oracle GoldenGate Capture for Oracle, ext_1.prm: Recovery completed for all targets.
    2012-02-12 15:08:35 INFO OGG-01517 Oracle GoldenGate Capture for Oracle, ext_1.prm: Position of first record processed Sequence 55, RBA 11345936, SCN 0.873188, Feb 12, 2012 3:00:14 PM.
    2012-02-12 15:09:07 INFO OGG-00987 Oracle GoldenGate Command Interpreter for Oracle: GGSCI command (oracle): start pump_1.
    2012-02-12 15:09:07 INFO OGG-00963 Oracle GoldenGate Manager for Oracle, mgr.prm: Command received from GGSCI on host 218.186.40.99 (START EXTRACT PUMP_1 ).
    2012-02-12 15:09:07 INFO OGG-00975 Oracle GoldenGate Manager for Oracle, mgr.prm: EXTRACT PUMP_1 starting.
    2012-02-12 15:09:07 INFO OGG-00992 Oracle GoldenGate Capture for Oracle, pump_1.prm: EXTRACT PUMP_1 starting.
    2012-02-12 15:09:07 INFO OGG-00993 Oracle GoldenGate Capture for Oracle, pump_1.prm: EXTRACT PUMP_1 started.
    2012-02-12 15:09:12 INFO OGG-01226 Oracle GoldenGate Capture for Oracle, pump_1.prm: Socket buffer size set to 27985 (flush size 27985).
    2012-02-12 15:09:12 INFO OGG-01055 Oracle GoldenGate Capture for Oracle, pump_1.prm: Recovery initialization completed for target file /app/ggs/trail/remote_trail_1/tm000001, at RBA 1435.
    2012-02-12 15:09:12 INFO OGG-01478 Oracle GoldenGate Capture for Oracle, pump_1.prm: Output file /app/ggs/trail/remote_trail_1/tm is using format RELEASE 10.4/11.1.
    2012-02-12 15:09:12 INFO OGG-01026 Oracle GoldenGate Capture for Oracle, pump_1.prm: Rolling over remote file /app/ggs/trail/remote_trail_1/tm000002.
    2012-02-12 15:09:12 INFO OGG-01053 Oracle GoldenGate Capture for Oracle, pump_1.prm: Recovery completed for target file /app/ggs/trail/remote_trail_1/tm000002, at RBA 1063.
    2012-02-12 15:09:12 INFO OGG-01057 Oracle GoldenGate Capture for Oracle, pump_1.prm: Recovery completed for all targets.
    GGSCI (ggs-1.cu.com) 3> view report ext_1
    ** Running with the following parameters **
    EXTRACT ext_1
    USERID ogg, PASSWORD ***
    setenv (NLS_LANG="AMERICAN_AMERICA.WE8ISO8859P1")
    Set environment variable (NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1)
    EXTTRAIL /app/ggs/trail/local_trail_1/ta
    discardfile /app/ggs/trail/local_trail_1/SRISRI_discard.txt
    GETUPDATEBEFORES
    TABLE HR.*;
    Bounded Recovery Parameter:
    BRINTERVAL = 4HOURS
    BRDIR = /app/ggs
    CACHEMGR virtual memory values (may have been adjusted)
    CACHEBUFFERSIZE: 64K
    CACHESIZE: 8G
    CACHEBUFFERSIZE (soft max): 4M
    CACHEPAGEOUTSIZE (normal): 4M
    PROCESS VM AVAIL FROM OS (min): 16G
    CACHESIZEMAX (strict force to disk): 13.99G
    Database Version:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for Linux: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Database Language and Character Set:
    NLS_LANG = "AMERICAN_AMERICA.WE8ISO8859P1"
    NLS_LANGUAGE = "AMERICAN"
    NLS_TERRITORY = "AMERICA"
    NLS_CHARACTERSET = "WE8ISO8859P1"
    2012-02-12 15:08:35 INFO OGG-01513 Positioning to Sequence 55, RBA 11345936.
    2012-02-12 15:08:35 INFO OGG-01516 Positioned to Sequence 55, RBA 11345936, Feb 12, 2012 3:00:14 PM.
    2012-02-12 15:08:35 INFO OGG-01055 Recovery initialization completed for target file /app/ggs/trail/local_trail_1/ta000001, at RBA 1307.
    2012-02-12 15:08:35 INFO OGG-01478 Output file /app/ggs/trail/local_trail_1/ta is using format RELEASE 10.4/11.1.
    2012-02-12 15:08:35 INFO OGG-01026 Rolling over remote file /app/ggs/trail/local_trail_1/ta000001.
    2012-02-12 15:08:35 INFO OGG-01053 Recovery completed for target file /app/ggs/trail/local_trail_1/ta000002, at RBA 1025.
    2012-02-12 15:08:35 INFO OGG-01057 Recovery completed for all targets.
    ** Run Time Messages **
    2012-02-12 15:08:35 INFO OGG-01517 Position of first record processed Sequence 55, RBA 11345936, SCN 0.873188, Feb 12, 2012 3:00:14 PM.
    TABLEWildcard resolved (entry HR.*): TABLE HR.JOBS;
    Using the following key columns for source table HR.JOBS: JOB_ID.
    GGSCI (ggs-1.cu.com) 4>
    GGSCI (ggs-1.cu.com) 1> view report pump_1
    ** Running with the following parameters **
    EXTRACT pump_1
    USERID ogg, PASSWORD ***
    setenv (NLS_LANG="AMERICAN_AMERICA.WE8ISO8859P1")
    Set environment variable (NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1)
    RMTHOST ggs-2.cu.com, MGRPORT 7809
    RMTTRAIL /app/ggs/trail/remote_trail_1/tm
    PASSTHRU
    TABLE HR.*;
    CACHEMGR virtual memory values (may have been adjusted)
    CACHEBUFFERSIZE: 64K
    CACHESIZE: 8G
    CACHEBUFFERSIZE (soft max): 4M
    CACHEPAGEOUTSIZE (normal): 4M
    PROCESS VM AVAIL FROM OS (min): 16G
    CACHESIZEMAX (strict force to disk): 13.99G
    Database Version:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for Linux: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Database Language and Character Set:
    NLS_LANG = "AMERICAN_AMERICA.WE8ISO8859P1"
    NLS_LANGUAGE = "AMERICAN"
    NLS_TERRITORY = "AMERICA"
    NLS_CHARACTERSET = "WE8ISO8859P1"
    2012-02-12 15:09:12 INFO OGG-01226 Socket buffer size set to 27985 (flush size 27985).
    2012-02-12 15:09:12 INFO OGG-01055 Recovery initialization completed for target file /app/ggs/trail/remote_trail_1/tm000001, at RBA 1435.
    2012-02-12 15:09:12 INFO OGG-01478 Output file /app/ggs/trail/remote_trail_1/tm is using format RELEASE 10.4/11.1.
    2012-02-12 15:09:12 INFO OGG-01026 Rolling over remote file /app/ggs/trail/remote_trail_1/tm000002.
    2012-02-12 15:09:12 INFO OGG-01053 Recovery completed for target file /app/ggs/trail/remote_trail_1/tm000002, at RBA 1063.
    2012-02-12 15:09:12 INFO OGG-01057 Recovery completed for all targets.
    ** Run Time Messages **
    Opened trail file /app/ggs/trail/local_trail_1/ta000001 at 2012-02-12 15:09:12
    Switching to next trail file /app/ggs/trail/local_trail_1/ta000002 at 2012-02-12 15:09:12 due to EOF, with current RBA 1307
    Opened trail file /app/ggs/trail/local_trail_1/ta000002 at 2012-02-12 15:09:12
    TABLEWildcard resolved (entry HR.*): TABLE HR.JOBS;PASSTHRU mapping resolved for source table HR.JOBS
    GGSCI (ggs-1.cu.com) >
    ######################### Target database information ##############################################
    Database Name : THAKUR(10.2.0.1) , Hostname : ggs-1.cu.com(Linux 64 bit)
    Oracle GoldenGate Delivery for Oracle Version 11.1.1.1.1 OGGCORE_11.1.1.1.1_PLATFORMS_110729.1700
    Error log
    ==========================================================
    2012-02-12 15:09:07 INFO OGG-01677 Oracle GoldenGate Collector: Waiting for connection (started dynamically).
    2012-02-12 15:09:07 INFO OGG-01228 Oracle GoldenGate Collector: Timeout in 300 seconds.
    2012-02-12 15:09:12 INFO OGG-01229 Oracle GoldenGate Collector: Connected to 218.186.40.99:47496.
    2012-02-12 15:09:12 INFO OGG-01669 Oracle GoldenGate Collector: Opening /app/ggs/trail/remote_trail_1/tm000001 (byte -1, current EOF 1435).
    2012-02-12 15:09:12 INFO OGG-01670 Oracle GoldenGate Collector: Closing /app/ggs/trail/remote_trail_1/tm000001.
    2012-02-12 15:09:12 INFO OGG-01669 Oracle GoldenGate Collector: Opening /app/ggs/trail/remote_trail_1/tm000001 (byte 1435, current EOF 1435).
    2012-02-12 15:09:12 INFO OGG-01735 Oracle GoldenGate Collector: Synchronizing /app/ggs/trail/remote_trail_1/tm000001 to disk.
    2012-02-12 15:09:12 INFO OGG-01735 Oracle GoldenGate Collector: Synchronizing /app/ggs/trail/remote_trail_1/tm000001 to disk.
    2012-02-12 15:09:12 INFO OGG-01670 Oracle GoldenGate Collector: Closing /app/ggs/trail/remote_trail_1/tm000001.
    2012-02-12 15:09:12 INFO OGG-01669 Oracle GoldenGate Collector: Opening /app/ggs/trail/remote_trail_1/tm000002 (byte -1, current EOF 0).
    [oracle@ggs-2 ggs]$
    GGSCI (ggs-2.cu.com) 1> view report rep_1
    ** Running with the following parameters **
    REPLICAT rep_1
    ASSUMETARGETDEFS
    setenv (NLS_LANG="AMERICAN_AMERICA.WE8ISO8859P1")
    Set environment variable (NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1)
    USERID ogg, PASSWORD ***
    MAP HR.*, TARGET HR.*;
    CACHEMGR virtual memory values (may have been adjusted)
    CACHEBUFFERSIZE: 64K
    CACHESIZE: 512M
    CACHEBUFFERSIZE (soft max): 4M
    CACHEPAGEOUTSIZE (normal): 4M
    PROCESS VM AVAIL FROM OS (min): 1G
    CACHESIZEMAX (strict force to disk): 881M
    Database Version:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for Linux: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Database Language and Character Set:
    NLS_LANG = "AMERICAN_AMERICA.WE8ISO8859P1"
    NLS_LANGUAGE = "AMERICAN"
    NLS_TERRITORY = "AMERICA"
    NLS_CHARACTERSET = "WE8ISO8859P1"
    For further information on character set settings, please refer to user manual.
    ** Run Time Messages **
    GGSCI (ggs-2.cu.com) 2>
    Thanks
    Tarun

    Hi,
    I have used below statements for ADD EXTRACT and ADD REPLICAT.
    ------Extract
    ADD EXTRACT ext_1, TRANLOG, BEGIN NOW
    -------Data Pump
    ADD EXTRACT pump_1, EXTTRAILSOURCE /app/ggs/trail/local_trail_1/ta, BEGIN NOW
    -------Replicat
    ADD REPLICAT rep_1, EXTTRAIL /app/ggs/trail/remote_trail_1/tb, BEGIN NOW, CHECKPOINTTABLE ogg.tarun_chk
    Yes, i have tried tutorial at Oracle Learning Library.
    Thanks
    Tarun
    Edited by: user8886876 on Feb 12, 2012 9:56 PM

  • Changes are not updated from ECC to CRM How to debug

    Hi,
    QCs 1140049726  and 1140047459 were updated in P20 system to remove the WBS.  This was done per normal P20 process and instructions.  P20 system correctly reflects that QCs have no WBS value and the contracts are BOX - all is correct in P20.
    CSP still shows these QCs as having a WBS assigned to them.  This is incorrect.  It has been over 24 hours since the P20 QCs were changed to reflect no WBS, but CSP still has not been replicated with the correct data.
    How to proceed with it. How to debug from ECC to CRM.
    Prem.

    Hello Prem,
    Could you please have a look at SAP note 656823?
    This note contains debug tips for btx data transfer. Please check point 6 which talks about the delta download.
    Hope this could be helpful.
    Best regards,
    Maggie

  • AD Changes are not reflecting our Share point

    We are using our exchange 2010 server has our messaging solution. we are also use our SharePoint 2010  for our portal.
    we are enabled multiple domain( abc.com, xyz.com) in our exchange and able to send and receive mails properly.
    for some  reasons we have changed the [email protected] to
    [email protected]  in our AD and Exchange.
    but in our  sharepoint work flow it shows only
    [email protected] only.   the AD Changes was not replicated in our share point.
     anybody help in the issue  was  appreciated.
    awaiting for  the update from anybody eagerly.
    Jags

    The User information list for that site collection will be out of date.
    You will need to ensure that:
    The UPS Sync process is configured and working
    The user is currently 'Active' in the site (get them to log into it)
    The UPS Sync job (to sync UPS to site collections) is running.
    To confirm this; check their properties in the hidden user information list on the site collection, check their profile in the UPS, check the synch history and if necessary the MIIS logs and then finally run the timer job.

  • New changes are not getting reflected in the bam reports.

    Hi
    I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
    Thanks in advance
    Laj Abraham

    Hi charles
    I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
    Your help in this regard is highly appreciated.
    Thanks
    Laj Abraham

  • Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

    Hi,
    I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
    The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
    I have referred the following links:
    http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
    http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
    According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
    this scheduler on development environment changes are getting reflected but not working on the production environment.
    Kindly help!
    Regards, Shruti

    You should check the obvious.  You made the change in dev, but did you make the change in production too?  And, is the term you updated, actually the one that you are looking at in the list item?
    There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
    If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process.  In this case, you should check the ULS logs for any errors.
    Chris
    Chris Givens CEO, Architecting Connected Systems
    Blog Twitter

  • Some Sales Orders are not replicating into CRM

    Hi guys,
    when I check SMQ2 in CRM,  I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
    when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
    *Error in SMW01*
         Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled     CRM_ORDER
         Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3
    It's not giving much clue what's the error is...
    I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
    any help on this?
    thanks,
    Ken

    Hello Ken,
    When reprocessing a BDoc(via SMW01) you might need to set a flag.
    Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
    Thanks,
    Rohit

  • When I external edit an aperture photo using Photoshop Elements 9 and then get out, the changes are not reflected in Aperture when I return - this used to work for me but doesn't seem to have for some time - help please?

    Have used Aperture for some time - at some point this stopped working - not sure when
    workflow:
    click photo and elect to use the external editor (Photoshop Elements 9)
    Copy of the photo is created in Aperture with the "O" badge and I am rolled out to Photoshop
    Have to change the type to 8-bit in Photoshop to start making changes
    When done and I exit I am prompted to save the photo
    On returning to Aperture however the "O" badged photo does not get updated/reflect my changes
    Other Things:
    I can find a changed photo sitting in the Aperture Library using finder or Photoshop itself - so I know changes have been made a new file saved (TIFF).
    I am wondering if I am missing some (new) preference such that the changes are not proerly being saved for re-display/storage in the Aperture Library
    I am running Lion OSX at the moment but the behaviour was the same under Snow Lepoard versions.
    Current version of Aperture is 3.1.3, Elements is 9.0
    Any help/suggestions greatfully received

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

  • I've been editing images with ease for a long time but now the changes are not being saved.

    I've been editing images with ease for a long time but now the changes are not being saved.
    Also, it is not liking me adding a large ammount of images in one go?

    Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS.  So to get help you need to give as much information as you can. Basic things like :
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • HT4075 I tried the steps mentioned above but the changes are not being saved.

    I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

    The link you posted gives be a 404 not found message. 
    The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos. 
    The standard URL for domain names that are forwarded with the CNAME method is:
    http://www.domain_name.com/site_name/page_name.html.
    You can change the site and page names in iWeb to give you something more informative about the site and page.
    If you're publishing to a  3rd party server and want to get rid of the site name in the url and only have
    http://www.domian_name.com/page_name.html
    do the following:
    publish the site to a folder on your hard drive (already done)
    use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
    You should delete the old site folder and files that are currently there beforehand.

  • Changes are not reflected in Script output

    Hi All,
    i am facing a problem in SAPscript.
    I have made a Zscript by copying standard script F110_FR_CHEQUE. I have made the changes in the script as per requirement in development client and transported it to testing client to test (As i dont have any data in development client). But, surprisingly, when i run the program and check the output, the changes are not reflected in the script output.
    First i thought that my script was not triggered thats whay i m not getting any change, but later i changed the dimension of one of the window, in which some hard coded text is written, the differece i found was that, window size is changed, but the text written in that window is still same (what was in standard script.) .
    I am using standard texts for hard coding in script. Standard texts have been transported in testing client also.
    please help me in this regard.

    Hi,
    Could you plese Check NACE whether your script is confiugring or not.
    If it is configured well then Check Standard Text is available or not in Test client by open it in SO10.
    Check all the paragrah formats applied to Standard text are transferred to Test client which are in SE72.
    IF it is available in SO10 then debug the print program for that windows any standard conditions are calling to print the text.

  • Changes are not reflecting in the discoverer workbook

    Hi ,
    I have a report created with user Disco(Disco.Report_name).Now I need to add a column to it and i have done that with other user Discodev but when I save it the changes are not reflected on Disco(Disco.Report_name) rather it is being saved with user Discodev(*Discodev.Report_name*) .
    The User wants that the changes should be reflected on Disco.Report_name (I can't use the credentials of Disco to do this as it is also a user) .
    Appreciate your help !!
    Discoverer Version 4i
    Thanks ,
    Vijay

    Hi West,
    Thanks for the reply.
    I want to get clarified one thing, Is there any option where DISCO user can give Privileges to DISCODEV to make the changes,as the DISCO user is not a common user I have a problem in making the changes.
    Thanks,
    Vijay

  • Changes are not Reflecting in WAD

    Dear Gurus,
    I got a problem in WAD. Changes are not Reflecting in My WAD. When i created NewQuery in WAD by just placing Chart & Saved it. After executing Chart is displaced.Again I updated the same query by placing table and saved it. After Executing Table is not displayed only previously saved Chart is displayed. Could any one Kindly solve my Problem.
    Thanks,
    Sony

    Hi Sony,
    SAP BI has HTTP Cache and the web templates are stored in the HTTP cache of the server. So, when you change a template and execute it again - the previous version which is stored in the HTTP cache is being retreived.
    To correct this, go to TCODE SMICM in the menu bar >> Goto >> HTTP Server Cache >> Invalidate -> Global in system
    Once this is done, ask basis to restart the java engine.
    I hope this helps you.!
    -Pradnya
    Edited by: Pradnya Rane on Sep 29, 2009 8:05 AM

  • Changes are not updating :(

    Hi-
    For the past few days, after I save changes (and these are simple text changes) they are not showing up on my webpage. The upload seems to be a little slow lately, but I'm not getting any error messages......it says it has uploaded. But....my changes are not there
    Is anyone else experiencing this??? Any advice???
    Thanks!

    yes, empty your cache as kabing said!
    a cache saves files from your website when you visit it often - therefore it loads faster. yet when you make changes to your website - they are then not recongnized and the old page is still showing!
    so my advice, empty your cache everytime you publish!
    max

Maybe you are looking for