Limit the no of segments per IDOC to less than the current default value

Hi friends,
please help me in the following issue.
The possibility to limit the number
of segments per IDOC to less than the current default value.
Purpose is to limit the traffic of IDOCs between systems.
How to solve this issue to avoid traffic
Thanks in advance.
Regards
Sandeep

Hi Kiran,
Actually we are using standard ones at that time we are getting prolems. When using custom developed ALE's
we are putting segment size is less.To decrease segment size is there any filtering at the sender side? To change segment size may be nedd to take help form SAP.
But if have filtering at any level from sender side need to confirm before consult SAP.
Regards
Sandeep

Similar Messages

The amount of down payment must be less than the invoice amount

Hi all,
Our customers are using SAP 2007-PL15 and SAP 2007-PL41.
When we want to create a down payment for a sales order, and we want to pay the entire amount of the sales order, including tax, we have to put an amount inthe TOTAL field of the Down Payment window since by default, the down payment amount is the total of the invoice before applying tax. The DPM is
higher than 100% (strange but I think it's normal since the down payment is not planned to take the tax in consideration).
Then, we create an incoming payment for this down payment. It's ok.
Then, we create an invoice based on the sales order we have paid with the down payment. It's impossible to use the down payment for the invoice... why that ? We receive the error 'The amount of down payment must be less than the invoice amount'. This causes big headaches to our customers !!
Could you explain us what to do please ?
thanks,
Luce

I'm very sorry, I have a similar question in dealing with AP Down Payment Request Linked to AP Invoice, my case like this:
1. I created 3 AP DPRs,their amount are each 100,000 RMB(for example, their document number are 10,11,12). then do the outgoing payment fully paided.
2. I created a AP Invoice with the amount 150,000 RMB(for example, this AR Invoice document number is 5). I use the buttom"Total Down Payment",and selecet AP DRP No.10 and 11. When I click the buttom"Add",an error shows:
The amount of down payment must be less than the invoice amount
and I don't know how to continue.....
Many Thanks
Kam
(PS:My English is poor,forgive me please. Shall I Speak in Chinese? then I can describe this question more clearly.)

With my KLIPSCH - the FIDELITY and REAR VOLUME is signaficantly less than the front chan

I had always been using KLIPSCH PRO AUDIO speakers, and I must say - they are simply incredible. I just bought another complete set of KLIPSCH 2. for the rear channel of my AUDIGY LS card ---- but and the FIDELITY and VOLUME is significantly less than the front channel. Is it that card? Is it the synthesized rear volume because it's not true 4 channel? It's that CMSS Or should I just hook up the rear to the front channel with a simple y connector?I want to hook up my whole whose with satellite KLIPCSH and just a few subwoofers.And I want to do with that LS card and Y connectors.Am I correct here - or do I need something MORE?__________Joliett

Please tell me if I'm right...the rear speakers input from a stereo source is not true 4 channel. So the fidelity and volume is somewhat different than the front channel.
To get the same fidelity, I need to use Y-connectors to join the fron speakers to the rear.
Or is there a soundcard that is better for that kind of installation?

Messages in Xi is less than the messages in R/3 server after processing.

Hi Experts
I have a scenario file - Idoc.
XI picks up the file from FTP process it and sends to the R/3 server.
Now I have a problem is when I check the Data in XI using IDX5 or SXMB_MONI the no of messages in xi is less than the messages in R/3 server.
I am checking the data of the last day like 8th May from 00:00:00 to 23:59:59 in both the cases.
In R/3 I check using BD87 t code.
Thanx

Hi Divyesh
Thanks for your prompt reply.
Ya I am also doing exactly the same . But the problem is that I am checking for yesterday datas.
In idx5 I get total of 2625 messages for orders.
When I check the same on BD87 i get 2636 messages with status 53 & 1 message with status 51.
Difference is of 11.
Now the question in how is it possible that it is picking 2625 data from FTP and after processing its sending 2637 data on R/3 server.
Thanx

Disable Booking if Reservable Quantity is less than the Ordered Quantity

Hi Everyone,
How can we disable booking of sales order if the quantity reservable for an item is less than the quantity ordered in the sales order?
Best regards,
Paul

You need to Modify WorkFlow . You can do something like this.
1) Add a custom node between Book-Eligible and Book Node
2) Write your logic Inside the proc, which will get called from newly created custom node.

How order got transmitted even if quantity is less than the minimum

Hi All,
We have an issue where an order has been transmitted for 23 cases where minimum is 25. This order came through even if this order is for that part of the region that should not be able to tranmit orders if under min..
Being a technical guy, I am not able to understand the issue itself.
Doubts :
1. How an order is supposed to be transmitted ?
2. What is this minimum below which an order should not be transmitted? Where this minimum value is defined ? Is it specific to customer or specific to area or specific to plant?
In which table or through T-Code I can check this minimum ....
Can you please guide how to explore the above....
Thanks in advance.
Regards,
Sanjeet

Hi Sanjeet
You can maintain "Minimum order quantity" in the Material master data.
Go to change mode of material master (MM02), enter your material number, click enter, select the "Sale org 1" tab and continue.
Now, in the "Sales org 1" tab , scrolled down and you will find a field "Minimum order quantity" as you required, save it.
Suppose, you have entered ,minimum order quantity as 10 pcs.
If you create an order for that item and if the quantity is below 10 pieces then system will give you "warning message". This is normal standard setting.
If you want that system should give "Error message" instead of "Warning message" , then go to transaction code "OVAH".
For combination "V4" and "082", change the sytem message to "E" (normally you will find here W).
NOW, SYSTEM WILL GIVE YOU ERROR MESSAGE IF YOU ENTER , in the Sale order, order quantity which is less than the minimum order quantity as specified in the material master data.

Reconciliation amount must be less than the balance due for this tran

Hi,
I received the error below when creating an outgoing payment for the invoices.
"Reconciliation amount must be less than the balance due for this transaction."
I have found this thread from Forum "Reconciliation amount must be less than the balance due for this trans " but that was posted in 2009 Jul.
The database version I am using is 2007B PL 13.
Kindly suggest if you know the solution for 2007b PL 13 for the above mentioned error.
Thank you.
Regards,
Yadana

Hi Yadana,
The solution from that thread is still valid for you. Your version is as early as 2008.
Thanks,
Gordon

Required delivery date in sales order shoud not be less than the inhouse pd

Customer Requested Dates (CRD) entered in orders are often shorter than Product form wise lead time.
Logic to be configured in SAP : SAP should capture the CRD as per the lead time of Products or Date entered by sales persons (whichever is later).
Required delivery date in sales order shoud not be less than the inhouse production lead time.
Please help.
Regards

IMG - Sales and Distribution - Basic Functions - Availability Check and Transfer of Requirements - Availability Check - Availability Check with ATP Logic or Against Planning - Carry Out Control For Availability Check
Here select the combination of your Availability Check & Checking Rule.
Under Replenishment Lead TIme, you need to put a Tick Mark in the Check Box of "Check without RLT"
This will make sure that system considers either the Requested Delivery Date or actual Material Availability Date, which ever is earlier.
Hope this helps.
Thanks,
Jignesh Mehta
Edited by: Jignesh Mehta on Nov 9, 2011 12:18 PM
Edited by: Jignesh Mehta on Nov 9, 2011 12:23 PM

Dramatic Drop in Books Sales from Over 270 per month to less than 70. Any answers as to why? Has this happened to others?

Sales of my books averaged over 270 per month for almost all of 2011 and 2012 and for January of 2013--then in February of 2013 and continuing to the present, sales dropped to less than 70 per month.
The sudden drop from over 270 per month to less than 70 per month with sales suddenly falling off the fiscal cliff in Februrary of 2013 is inexplicable. I can find no reason for it.
Therefore, I am asking other authors: Has this happened to you? Any idea of what changed? I presume something must have changed within the itunes bookstore, or there was a change in the listing of my books.

In additon to this forum, we contacted Apple Ibookstore support and this afternoon they may have provided the explantion:
According to Apple:
"iBookstore that change frequently including top charts and any featured placement sections (IE: New and Noteworthy sand other special or seasonal sections). All featured placement is solely at the discretion of Apple and isn't guaranteed. If your book was in one of these prominent sections or top charts before and is no longer there, this might be what you are noticing in your numbers."
Fortunately for us, our authors probably got us featured placement for 2 years. Unfortunately for us, after 2 years it appears we were shoved aside for another pretty face. Thus, book sales imploded.
We thank Apple for answering our inquiries and providing us with useful information as to how to (hopefully) drive sales back up.

Why is the contents of Safari's downloads folder different than the actual folder?

Why is the contents of Safari's downloads folder different than the actual folder that resides in my users folder?

Problem is if I delete that .plist I'll delete those downloads. I'm still able to launch those downloads from that location so that tells that file is probably not corrupted. I need to be able to located that folder and transfer the downloads from it before I do anything like this. So that begs the question, where is that folder located? When I do a folder search I'm taken to a Downloads folder, but it's not the one that is showing up from within Safari as it's contents are too different.

SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi,
I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
<Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
"The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
error logging. So we created another project in Visual Studio called:
<Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
And this is when the error has come back and bitten me! The scenario is now as follows:
1. project1 packages and deploys successfully with long feature names and deep paths.
2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
1. By doing the following I can get project2 to package
In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
Clean the solution
Shut down Visual Studio 2010
Open Visual Studio 2010
Rebuild the solution
Package the project2
et voila the package is generated!
This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
no longer be hanging onto something.
Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
solutions on a Build Server using automated builds.
2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
5. DebugView shows nothing useful during the build and packaging of the project.
6. The error seems to occur in
CreateSharePointProjectService target called at line 365 of
Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
project2 completely and recreate it and introduce it into my Visual Studio solution.
Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
project etc... and is actually workable in a meaningful Visual Studio solution.

Hi
Yes, I thought I had fixed this my moving my solution from the usual documents to
c:\v2010\projectsOverflow\DetailedProjectTimeline
This builds ok, but when I come to package I get the lovely error:
Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
Now, the error seems to be related to
Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
<metaData>
<type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">VisualProjectTimelineWebPart</property>
<property name="Description" type="string">My Visual WebPart</property>
</properties>
</data>
</webPart>
</webParts>
.... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
Daniel

TFS Build Error - Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters

I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
Other Errors and Warnings
1 error(s), 1 warning(s)
Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
Thanks,
Altaf B.

Hi AltafB,
For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am debating between the 13in 2.9ghz mac book pro or the 13in 2.5 ghz mac book pro with all the same specs bbut for me i am trying to see which one for the money is better becuase the 2.5 will run me 100-200 dollars less than the other

I am debating between the 13in 2.9ghz mac book pro or the 13in 2.5 ghz mac book pro with all the same specs bbut for me i am trying to see which one for the money is better becuase the 2.5 will run me 100-200 dollars less than the other

Only you can make that determination. All things being equal the 2.5 GHz model is slower.

PO is getting released even if the total amount is less than the last PO am

Purchase Order is getting released even if the total amount is less than the last PO amount. The release strategy is only working for the first Purchase Order and if the PO amount is greater than the last PO amount.
Please let me know how to correct this scenario (release strategy).
Regards,
Prishu

Hi,
Release strategy has nothing do with the previous PO amount. May be, Co-incidently the amount in previous PO which you are referring and the characteristics value maintained in the release strategy is same.
1) Please go in release strategy by the path mentioned below
IMG u2013 Material Management u2013 Purchasing u2013 Purchase Requisition u2013 Release Procedure u2013 Procedure with Classification u2013 Set Up Procedure with Classification
2) Then go to release strategy. Here the total available release strategies would be displayed. Double click the strategy which is getting reflected in the PO you want and go the classifiction tab. There you will get the PO value. Based on this characteristic value the respective release streategy gets refelected.
I hope this clarifies.
Regards
sachin

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

Limit the no of segments per IDOC to less than the current default value

Similar Messages

Maybe you are looking for