Limit to number of tests and learning objects in a Content folder in OLM

All,
Before I ask my question I want to preference a few things:
1. My company has been using OLM for approximately 2 years.
2. For the most part we use OLM to track compliance, meaning that we use Online tests to track compliance to specific company standard operating procedures. Which as you can imagine is a lot of documents.
So, with this is mind. We setup a course, offiering (with associated test) and class to determine if an employee has completed reviewing the changes to a document, as each document revises.
Now to my question...
Today we noticed that some of the tests for this compliance process in OLM were not being displayed. All of the tests exist in their own folder for this process. Note: There is a single content folder on the content tab of OLM for all of these tests. And when we check the count from the front end we see that there are 1001 displayed from the dministrator front end of OLM.
However, some of these are not listed here. Even eif you click next all the way to item (test) number 1001.
So, Is there a limit to the number of test or learning objects that can exist in a content folder in OLM?
If so what is this limit? Is it 1000? 1001?
My understanding is that you cannot move a test in the content hierarchy, if it is bound to a folder or even a parent learning oject it forever stays there. And you cannot delete it once it has attempts against it.
So where does this leave us... We know that some of the tests in this content folder are missing because our catalog has less items in the same associated folder. In other words we have better organization in the catalog (for courses, offering and classess, because each course has its own folder. So if we go to a known missing Offering we can determine the learning object / test associated with it. If we copy the name of this test and search for it on the Content tab it is in fact found.
So we know it is there and we know that people have competed it as a result of the status of the enrollment, yet we cannot go to it on the Content tab.
This leaves me baffled.
Is there any way that we can get to these from the Administrator Front end? Can we move them on the back end?
Any help anyone can provide is sincerely appreciated. I am doing a deep dive with my IT staff on this next week to come to some resolution on this, because we have had to halt our process until we have a resolution.
Thanks for your help!
Brian Urbanek - Luminex Corporation Training Operations Manager

Hey Brian,
I believe you should be able to personalize the number of rows displayed to overcome the pre-defined limit.
Or check this thread, it might help.
How to remove the limitation on no. of rows
Hope all is well,
Scott
http://www.seertechsolutions.com

Similar Messages

  • Limit on number of plugins and/or effects?

    Does CS 5.5 limit the number of plugins or effects.  If so, what is the limit?
    Thanks,
    Steve

    Hi Durin,
    I was thinking of the number of effects that can be used in a session rather than the total number available.  While I think that the 16-effect limit that is mentioned in the link I provided would probably be enough for me, that fact that the "pro" version of the software has a much higher limit suggests that the number might be important for some users and therefore the question.  The best answer is the realistic limit rather than a theoretical limit (if you're able to answer in these terms).  I generally assume that sales literature, such as the provided link, list theoretical limits.
    Your response has prompted another question, if it's okay.
    There may be some maximum amount of memory we can allocate to the effects list
    Is this based on how Audition is implemented in relationship to the stack and/or heap?  Also, for optimal Audition use, is it ever beneficial, as an end-user, to think in terms of the stack and heap, in terms of how one works.
    Thanks,
    Steve

  • Serialization, unit tests, and handling object changes

    Hi;
    I have a ton of unit tests where I create an object, check it very carefully to make sure it is correct, then write it to disk (serialize it).
    The for my unit tests I create the same object (these objects are very complex) and then read in the serialized object and compare them field by field.
    My problem is if I change the object in any way, the old serialized copy is now invalid. Is there any way I can get it to read the old serialized data into the new version of the object without writing code to read/write each field?
    thanks - dave

    Hi;
    I'm aware of the serialVersionUID attr. I was hoping there was another serialization mechanism that was forgiving of a mis-match between the object and the serialized data.
    In the .NET world you can serialize to xml and it does the best it can if there is a mis-match. But on the downside, for serialization to/from xml, it's only public properties.
    Does java have anything like this?
    thanks - dave

  • Instal Oracle Portal for testing and learning purpose on 2 machines

    I have two PCs. One is runing Windows XP, one Linux Fedora Core 4. I'd like to usem them for geting to know Oracle Portal. Linux as Aplication Server, Win as DB server.
    I can't seem to find minimum HW requirements for Portal. Linux machine is 256MB RAM, Pentium II 350 MHz. As I said, it doesn't have to run fast. it just has to run for the beggining. Then I can decide whether to use it and think of the real configuration for business purposes.
    Please advise.

    RAM requirement for Infrastructure is 1GB - this included an Oracle 10G database for identity management. RAM requirement for Middle Tier (Portal and Wireless) is an additional 1GB.
    Requirements to run both on one host is (according to Oracle) 1.5GB.
    I have it all on a single host here (SuSE Linux Enterprise Server 9) with only 1GB ram (It's an Athlon 1.4) so there is some flexibility here. You may get away with the CPU, but I think you need a lot more RAM.
    Your athlon Windows Machine could do it all. I have a working 10G Application Server on a 2GHz Pentium M laptop (2 GB RAM). If you don't start it up automatically every time the OS starts then you will have plenty of resources.
    Since 10G AS also includes 10G DB then only one machine is all you would need.
    Good luck

  • When I air print from my iPad, I can't limit the number of pages. It just says print and the number of copies and I end up with way more than I want. How do I set it to limit the pages?

    When I air print using FingerPrint from my ipad, it doesn't let me limit the number of pages, and I end up with more pages than I want. It asks if I want multiple copies, but it doesn't ask me number of pages, or which pages. Is there a way to do this?

    When you use an AirPrint compatible printer, you get this option for page range. You are using your computer as the server in order to print, so you probably have to set the range on the computer. While you can print from your printer with this app, I assume that it doesn't give you the same control that you get directly from the iPad when using an AirPrint printer.
    Read this from the FingerPrint support site. Selecting the page range would be part of the formatting of a print job.
    http://fingerprint-support.collobos.com/knowledgebase/articles/66972-i-can-t-for mat-the-print-job

  • How to limit max number of downloads at once (and create a download queue)

    I just "upgraded" to Mozilla 26.0 last night and was quite irritated that they changed the made it so that I cannot access the old download window. Was it really necessary to get rid of the work-around to get to the old download window?
    Anyway, besides being more visually appealing, it previously downloaded two files at a time, unless I manually forced it to do more. The rest of the files would go into a download queue to wait their turn. After the update, it no longer creates a queue, leading to much slower downloads and it also slows my computer if I download too much.
    Is there any way that I can limit the max number of downloads (unless I want to force it to download more) like I had on the previous version of firefox? I would prefer not to add more any add-ons, so if there is an check-box that I missed somewhere or something in about:config that would allow me to do this it would be better.
    Also, is there any way to pause downloads now?

    Check these 2 articles
    https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file?esab=a&s=how+to+put+a+file+in+download+queue&r=2&as=s
    https://support.mozilla.org/en-US/kb/find-and-manage-downloaded-files?esab=a&s=limit+maximum+number+of+downloads+and+create+a+download+queue&r=1&as=s
    This might help you.
    Thank you.

  • Learning Objectives

    Hi,
    I am working on LSO 604 version.I am testing the Learning objectives functionality. I have created two learning nets each having the same learning object. In the first learning net, I attached a learning objective to the learning object and checked the attainable flag. In the second Learning net, I did the same for the learning object except that I didnt check the attainable flag.
    I attached these leraning nets to new courses - course A and Course B. I as a participant completed course A. I was able to see the learing objective against my employee number in the table LSOTPTEBO_C. Now when I play course B, the content player takes me again through all the learning objects. I expected the content player to skip the learning object which has already got the objective attached to it.
    As per the SAP documentation, I should not be getting the repetitive contents again when I go into another course.
    [url]http://help.sap.com/saphelp_erp60_sp/helpdata/EN/0d/85ee3cc2617978e10000000a114084/frameset.htm[url]
    Can someone comment on this please.
    Thanks,
    Murali
    Edited by: Muralidaran Shanmugam on Aug 26, 2009 7:56 AM

    Hi Muralidaran,
    First you should have checked the learning objective as success criteria when you define a course type,in lso_pvd0.
    Second when you have achieved the objective which course A and course B has, then when you book the course,before starting the course i hope you should get 100% in the success criteria, you  dont have to go through the course,
    Third is check the Table of contents in the content player where all the nodes have been marked ticked, since you have achieved the learning objective.
    When you go through the course content player will still take you through the course as a review, but the actual will be reflected in learning objective Success % in the learning Portal.
    I hope the above details answer your problem.
    Regards
    Moyeen

  • How do I Limit the number of Clients Per AP, Per Radio

    I'm have WCS, 2 - WLC4404, 1 - WLC4402 and 1 WISM (6509). All running 7.X OS.
    Here is my problem I have 4 3502 AP,s in the hall, but the laptops all connect to one AP. 2 Clients on A and 26 Clients on G.
    How do I control this?
    Mike

    If you want to limit the number of clients PER AP then this is a feature that has been identified and will be available in the next few version.
    You can, however, limit the number of clients and default is set to 12.

  • Parametrized Tests and IRunListener issues

    Hi,
    I'm currently working on fixing flexunit 4.1 support for Flexmojos and have run into some problems with the new Parametrized reports.
    In Flexmojos we usually counted the number of tests and then decremented that number each time a testFinished was called. Unfortunately with parametrized tests we can't expect the number of times the IRunListenertest.Finished functions is called to be equal to the number of test functions. This resulted in Flexmojos reporting an "all is ok" each time the number of executed tests equals that of counted test functions. All failling tests beyound that point would stay undetected, which is rather undesirable.
    My question now is, with the introduction of parametrized tests, is there a new Interface I can use instead of "IRunListener" that somehow provides callbacks for "testCaseStarted" and "testCaseFinished"? For example if one test function would be executed 2 times I would expect the callback sequence to fe as follows:
    testRunStarted
    testCaseStarted
    testStarted
    testFinished
    testStarted
    testFinished
    testCaseFinished
    testRunFinished
    If such an interface doesn't exist ... how could I implement something similar?
    Chris

    Ok well in the meanwhile I solved the problems by restructuring the flexmojos unit test support in general.

  • How to set up DEV, TEST and PROD environment?

    We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
    The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

    We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
    The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

  • I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

    I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file.  I have run a number of searches and  cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
    Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps.  The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members.  I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
    Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

    My apologies Eadeszoo I believe our support agents are unavailable on January 1.
    Are you able to copy the contents of the DVD to your computer?  Are you receiving any particular error messages when you are trying to install?  Finally which operating system are you using?

  • Is there a Limit on number of authorization objects in a role?

    Hi all,
       Is there a Limit on number of authorization objects in a role because I am getting the following error.
    Authorization is full. Please enter fewer values
    Message no. 01262
    Diagnosis
    You have included too many values in an authorization.
    Procedure
    Please distribute the data to at least two authorizations and combine them in a profile.
    Thanks.

    Hello Neha,
    Message no. 01262 refers to the entered values in an authorization, not to the objects listed in the profile!
    So this message tells you, that you have to split the authorization, as the authorization contains too many values. It is not a quesiton of that you have entered too many different objects to the profile!
    Please refer also to:
    [SAP Note 410993|https://service.sap.com/sap/support/notes/410993]
    and
    [SAP Note 943796|https://service.sap.com/sap/support/notes/943796]
    b.rgds, Bernhard

  • Move existing Learning Object or Test

    Hi,
    Is it possible to move an existing Learning Object or Test into a new Learning Object thus creating a nested structure? From the thread "OLM - Merging Multiple Learning Objects into One" posted in July 2010, it sounds possible but I don't know how.
    Alwyn

    Hi Alwyn,
    You cannot move an existing Learning Object to create a nested structure, but you can create a parent Learning Object and add new child Learning Objects, Tests, and/or Surveys underneath it (or copy existing Learning Objects, Tests, and/or Surveys underneath it).
    To create everything from scratch:
    - Create a top-level Learning Object and leave the starting URL blank
    - Select the radio button next to the Learning Object that you just created and create a new Learning Object
    - Set the tracking type and starting URL for your child Learning Object as appropriate for the content you're pointing to
    To add another child Learning Object or test, select the radio button next to the top-level Learning Object and repeat the same steps until you have all of the nested Learning Objects / Tests / Surveys that you'll need.
    The steps are pretty much the same for copying existing Learning Objects:
    - Create the parent Learning Object
    - Highlight the radio button next to the Learning Object you wish to copy
    - Click the Copy button
    - Select the radio button of the parent Learning Object you created in step 1 and click Apply
    - Update the copied Learning Object so that the title doesn't say (copy) at the end
    A parent will be marked completed when all of its children are complete. You map the Offering to the parent Learning Object.
    I hope this helps!
    Anne

  • Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

    Hi, how can I limit the number of emails I can see on my iPhone 5. Every time in delete one and older email gets added from my live.co.uk account (where I want to keep my 2500 emails) I just don't want many on my phone. Thanks

    You can't. Why on earth would you attempt to manage 2500 emails with setting up a folder structure or some means of doing so? Simply keeping them in an single inbox is not realistic, no matter what email client you use.

  • Can I limit the number of appointments made by everyone at a specific time and place?

    I want to limit the number of people who make an appointment at a specific time and place.  Can I do this?

    Which Adobe software are you using?

Maybe you are looking for