Limit TOTAL bandwidth on Server

Hi all
I have two question:
1) There is a method for limit the TOTAL (not for client) bandwidth in downstream withouth the Server Side Action Script ?
2) If the anwer on the first question is NO (i think NO) can you give me an example of the script for limit the TOTAL bandwidth in Downstream ?
Thanks all.
PL

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Routers don't have feature to limit bandwidth by some to some cumulative amount.
What you might be able to do is use embedded scripting, monitor usage from 6 AM to 8 PM, and as it approaches your cumulative limit, add (via the embedded script) a policer to try to avoid hitting your cap.  The embedded script could set a policy, as the cap is about to be reached, to drop all further packets.  It could also have tiers allowed policed bandwidths, which slow egress rates as cap is approached.

Similar Messages

  • Limit total bandwidth sent by a router

    I have a router in a remote location that the ISP limits us so we can only send up to 800MB of data from 6 am to 8 pm after that we can send as much as we want. I have some servers that I always want to be able to get out - is there a way to put a hard cap on the users so that they have 200 MB of data in those hours and if they "spend" it all they are cut off until the unlimited time.
    I do not need to shape or police traffic - i need to put a cap on the router so it will not over send the 800MB limit - is this possible?

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Routers don't have feature to limit bandwidth by some to some cumulative amount.
    What you might be able to do is use embedded scripting, monitor usage from 6 AM to 8 PM, and as it approaches your cumulative limit, add (via the embedded script) a policer to try to avoid hitting your cap.  The embedded script could set a policy, as the cap is about to be reached, to drop all further packets.  It could also have tiers allowed policed bandwidths, which slow egress rates as cap is approached.

  • How to limit the bandwidth on another computer

    Hi, I have a wrt54g router and I'm sharing my DSL connection wirelessly with someone's else computer in my basement. When he is on my network my download rate is very slow, like around 10kB/s (my total download bandwidth is 1.5 MB/s)... but when he is not connected, I can download about 70 kB/s. I think it is slow because he is using up a lot of bandwidth so I was wondering if there's is a way to set the router to limit his bandwidth to a certain amount.  I have a Duron 750 processor. Thanks. 

    I think you have the same problem with this thread.. check this .
    MyPOV
    Yesterday is history. Tomorrow is mystery. Today is a gift.

  • Rate limit high bandwidth application

    I have a 10mb line from a site office to my HQ.
    there is one user in the HQ office that is running some high bandwidth application, taking up 50% of my total bandwith.
    its some video monitoring system.
    i am using a C1841 router.
    how do i limit the bandwidth the user can occupy ?
    SrcIf         SrcIPaddress    DstIf         DstIPaddress    Pr SrcP DstP Bytes
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CC9F    46M
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CCE7    32M
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CD01    25M
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CC9C    21M
    Fa0/0         10.200.2.181    Tu1002        10.200.90.158   06 022A CE2B  9478K

    i have enable nbar on the router.
    what i can see that all are gre traffic.
     FastEthernet0/1
                                Input                    Output
       Protocol                 5min Bit Rate (bps)      5min Bit Rate (bps)
       gre                      223000                   288000
       bgp                      0                        0
       ntp                      0                        0
       bittorrent               0                        0
       citrix                   0                        0
       cuseeme                  0                        0
       custom-01                0                        0
       custom-02                0                        0
       custom-03                0                        0
       custom-04                0                        0
       unknown                  0                        0
       Total                    223000                   288000

  • How to globally limit the bandwidth of FMS 3.5

    Hi all,
    Can you give me a hint on how to solve this or confirm me the following ?
        Is it possible to limit globally the bandwidth usage of FMS 3.5 ?
    I don't want FMS  to use all the bandwidth available via our ISP.
    I want my coworkers and other servers to be able to continue using Internet while sending/receiving data from/to FMS
    I know it is possible to limit various bandwidths per Applications, but it seems there is no easy way - using the xml config files - to globally limit the server bandwidth.Ok I could compute a limit per app, but it is not a long terme solution to modify all the config files each time a new applications is to be installed.
    So I think it is not possible to easily limit globally the bandwidth of FMS.
    Do you agree with me ?
    If not, how did you manage this : do you have an example, some code ?
    Thanks for your answers
    Fred

    Thanks for the try, though I'd hope you aimed at a another solution
    I think your proposition is not possible this way, because:
    (It is for streaming only )
    1) say we have a BW of 100 [Mb/s] available for this FMS.
    2) the individual bw needed by the media files (indbw) within an application ranges from 200 [kb/s] to 2000[kb/s] (some files are audio, others medium quality video, some good quality video)
    3) the BandwidthCap (in application.xml) is  per connection within the application. (to simplify the talk we choose a BandwidthCap = indbw )
    4) the MaxConnections (in vhost.xml) is per vhost
    The question is "which indbw one chooses to divide the available 100 [Mb/s] BW" : ( MaxConnections = BW divided by BandwidthCap )
    Two possibilities:
    A) Let's take audio only indbw, that's 200 [kb/s], then FMS can serve 500 connections
    B) Let's take good quality vid indbw, that's 20000 [kb/s], then FMS would be limited to 50 connections.
    Both ways are not good :  in A) we risk jamming the internet link if too many of the connections are in fact streaming video, in B) we can not serve enough people and will likely waste some BW sinc not all clients will stream good quality video.
    Does anyone has another hint about " how to globally limiting the bandwidth of Flash Media Server 3.5" ?

  • Limit Data Bandwidth on VoIP

    We are an US based international call centre.We are using cisco AS5300 as our VoIP gateway. I would like to know if i can use the same AS5300 for internet as well. If yes how can i limit the bandwidth out of the total bandwidth i have for data i.e. internet.Please let me know at the earliest.

    Hello,
    as an additional info to the previous post: I would recommend to use LLQ for voip traffic.
    Not only a certain amount of bandwidth but also low delay are important for voip traffic.
    So outbound you could use a policy like this:
    ip cef
    class-map match-any VoIP
    match ip dscp ef cs5
    match protocol rtp audio
    class-map match-any VoIPsignal
    match ip dscp cs3
    policy-map VoIPprio
    class VoIP
    priority percent 10
    class VoIPsignal
    bandwidth remaining percent 5
    class class-default
    fair-queue
    random-detect
    interface Serial0
    ip address ...
    service-policy output VoIPprio
    You would have to adjust the bandwith ratios for your needs and the interface naming to your environment.
    The policy will give 10% of the link to voip traffic with lowest possible delay, 5% of the rest for voip signaling, and the rest for the other data present.
    Again as already mentioned your ISP controls the interface towards you and you might need his helps to solve potential voip qos issues arising from dropped packets on his side.
    Hope this helps! PLease rate all posts.
    Regards, Martin

  • Is possible to limit sharing bandwidth of peers in  Netgroup   ?

    Hi everyone,
    I am creating an audio-video conference tool using flex and FMS 3.5. I am using Netgroupfor publishing audio-video.
    Issue is that each peer share its bandwidth. I set Netstream.multicastPushNeighborLimit = 0  but peers still share there bandwidth. Is it possible to limit sharing bandwidth of peers in Netgroup? if yes then How? please reply.
    Thank you.

    Thanks Michael,
    I found one more issue with P2P. There is a delay of 4-5 second in live streaming.
    Can u have any solution how to remove this delay?
    multicastPushNeighborLimit
    multicastWindowDuration
    multicastRelayMarginDuration
    multicastAvailabilityUpdatePeriod
    multicastFetchPeriod
    multicastAvailabilitySendToAll
    Can these properties help if yes than  how can I use these properties to remove delay.
    Thank You

  • How can i find out how much bandwidth my server has?

    I have a mac pro running os x leopard server and im using this for my companies server. How can i find put how much bandwidth the server has?
    Thanks Sam x

    What you are asking really doesnt mean much. Well, it actually means too many different things:
    either Available network bandwidth: The internet, or local area connection (where are your clients?)
    or Available network bandwidth: How much data will your ISP allow you to transmit as part of your plan?
    Can you be more specific?

  • How to check SAP utiliztion in total bandwidth

    Hi Techies,
    Is there any way to find SAP utiliztion on total bandwidth for one particualr user id.
    This can help us to analize the network utiliztion and upgradation plan.
    *In ST06 we can check the LAN connectivity, but i want to know the utiliztion of bandwidth
    Regards,
    Nick Loy

    Hi,
    You can check network response for particular user from ST06 "LAN CHECK BY PING". Select the user/terminal and perform ping.
    For LAN Check by Ping, standdard response times are:
    - In a local area network (LAN) : <20 milliseconds
    - In a "fast" Wide Area Network (WAN) (for example, 256 or 384 KBit/sec): < 50 milliseconds
    - In a "slow" wide area network (WAN) (for example, 128 KBit/sec or less): < 250 milliseconds
    - Losses of data packets ("Loss") should not occur at all.
    If result of your Ping is more than described above, then this indicates problem with network.
    Regards,
    Rakesh

  • How to find total 'bandwidth' used by all WSA's?

    Hello,
    I was asked to find out what the total 'bandwidth' that was being used by our WSA boxes over say a period of 30 days. Does anyone know if there is anyway to find this out either via the WSA or the SMA appliances?
    We have 2 S370's running 7.5.1-201 and an M160 running 7.9.0-107 with centralized reporting.
    From the M160 I browsed through all the different reports but didn't find one that really defined something like 'total bandwidth for all users'.
    I think what they are looking for is box 1 used up xxxx mb and box 2 used up xxxx mb
    System Capacity tells me an Average of Usage and Performance and lists "Bandwidth Out (Bytes Per Second)"
    but I was just hoping there may be a way to find a total for this. Maybe there isn't but just curious..
    Thanks for any info...
    KJ

    The only way I know of is by using the "monitoring/statisics" page and setup bandwidth management.

  • Do the sub-interface of ASA firewall has limit of bandwidth

    do the sub-interface of ASA firewall has limit of bandwidth? or how does the bandwidth of the physical interface divided among the sub-interface? is there a cisco documentation url link that explains this?

    Nakayama-san,
    The configuration recommendation to limit the traffic entering the router was intended for legacy (i.e. non-ISR routers). Since you are using a 2811, I would recommend that you test WAAS without these limitations configured.
    Thanks,
    Zach

  • RV220W limit inbound bandwidth on VLAN

    Hi
    Can anyone help? I have set up 3vlans with their own SSIDs on my RV220w. I am on a fibre broadband connection but want to limit the bandwidth on 2 of these to 8mbps.
    what is the best way to do this in the router settings? If anyone can point me in the right direction I would be very grateful. 
    Thank you 

    You can use a service-policy on the ASA:
    http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/mpf_service_policy.html
    This is only going to limit outbound traffic and while you can limit inbound (from the ISP) the data has already been received and thus used bandwidth.  it would though force TCP connections to throttle back, but with enough users all trying to do something, a service-policy policing traffic may not work as well as you expect.

  • Total Bandwidth requirement for 720p 30fps video call to mcu 5300 and P2P call

    Hi All,
    One of customer purchased 5300 MCU VCSC and VCSE from us.
    All infra will be setup in their HQ and all endpoints are from internet. All endpoints will register to VCSE.
    customer requirements are 5 concurrent encrypted calls to MCU with 720p 30fps and point to point 10 concurrent encrypted calls.
    endpoints are cisco c series endpoints and polycom HDX endpoinds.
    They haven't  subscribe the line yet. we need to propose the minimum bandwidth requirement to customer.
    1) what is the minimum bandwidth requirements to achieve 720p 30fps encrypted call to MCU?
    2) what is the total bandwidth requirements for 5 concurrent encrypted calls to MCU?
    3) what is the total load of bandwidth requirements for 5 concurrent encrypted calls to MCU and  point to point 10 concurrent encrypted calls?
    Thanks advance for you answer!

    point to point 10 concurrent encrypted calls?
    Even with a miltisite license installed on the codec to enable the built in bridge on the endpoint, you're only going to be able to connect up to 3 sites max, the endpoint hosting the conference that has the multisite option + 3 others. You'll have to rely on the MCU to host these conferences. 

  • How to set up a QOS on 3750 switch to limit outbound bandwidth on a server ?

    Hi,
    I have three LAN ports on a VM server. I want to limit a VM guest (guest server) outbound bandwidth to 3750 swith .
    How do I do it ? I want to apply QoS on the switch.
    thanks

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    If you're looking to limit bandwidth FROM your server, you can use an ingress policy on the server's interface and police selectively.  For example, if your specific VM has its own IP address, you could police inbound (from the server) traffic matching that IP.

  • How can I track a days worth of total bandwidth usage?

    I've been trying to figure this out for a while now... I have setup SNMP with Solarwinds NPM to gauge the bandwidth over a link using the OID,
    iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifOutOctets &
    iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifInOctets but these seem to only show the current bandwidth utilization at the time of polling the device. I want this information but I also need to know the total amount of bandwidth traversing over a link for an entire day.
    I'm trying to gauge the amount of bandwidth used for a server that's continually replicating to a backup server. So I would like to know the amount of data that was transferred for the entire day and also the maximum load amount during that time. Can I setup something like this on a 2960 switch or perhaps create a SPAN port that is linked to a system with bandwidth monitor software?
    Thanks for any advice!  -Mark

    Netflow is the best tool for this, assuming you have a router in the path that supports Netflow. (L2 switches and most L3 switches do not but most routers do.)
    Given a Netflow-capable device, export the flows to a Netflow server (Solarwinds and Manageengines make licensed ones and one can also use an open source one like ntop). There you can look at total volume of traffic generated from a given source-destination address pair.

Maybe you are looking for