Limit user fields seen in Modify User Approval Request task - 11g R2

Hi,
I want to do the following;
I fire a 'Modify User Profile' request, the request is being assigned to the right person. When the approver opens the task assigned to him in the Request Details tab he sees all the data about the user he will approve. I want to limit the user fields seen on this page, I just want to show few fields to the approver, is that possible? If yes how I can achieve that? Any help is strongly appreciated..
BR ,
Aliye

Thank you Nayan for your fast response...
If I do it in the way you suggested, the user will not see the attributes also when he try to modify user by clicking 'Modify' link from the oim user page. I want to do this only for the page accessed described below:
Approver user has logged in to oim
click Pending Approval from left pane-> Select the task from the list ->Task Page oppened-> Click Request Details tab->User attributes are seen ... I want to limit the attributes on that page.. Customize link is not accessable from here...
Do you know any other way to achieve my requirement? Maybe there is something like approval template I dont know...
Thank you so much for your guide..
BR,
Aliye

Similar Messages

Missing Field error when modifying user Master Record

We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
Is there a way to have the portal ignore incomplete records and just save what it has?
Thanks
Ken Burd

We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
Is there a way to have the portal ignore incomplete records and just save what it has?
Thanks
Ken Burd

OIM 11g Modify User Profile for Updating End Date

Hi Gurus!
We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
Thank you in advance.
Regards,

Hi Kevin,
thanks for your reply!
But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
How can, in this situation, a requester enable the user and extend its End Date?
Thank you!
Regards,

Authorization Policy for Modify user in OIM 11gR2

Hi Experts,
Requirement: I want the users in particular org not to modify certain user attributes and users from other org should be allowed to modify user.
I have created user1 whose organization is org1 and role is role1. I have also created user user2 under same org and same role. I assigned the Admin Role "User Administrator" role to user2.
So If user2 from same org1 tries to modify certain attributes then OIM should throw error message. I have completed till this.
But when the user from diff org say org2 with Admin Role "User Administrator" tries to modify user, OIM is not allowing to modify user which should not be the case.
I want the Auth Policy to trigger only for Org1. I have specified the below condition for my custom policy in OES admin console but it is not triggering.
The condition is
IF ( OrclOIMTargetEntity = 'true' AND OrclOIMUserOrganizations = 'true' AND STRING_AT_LEAST_ONE_MEMBER_OF(OrclOIMUserOrganizations,['25','1000000']) = true )
What am I missing?
Any help is much appreciated.

Hi
Can anyone let me know the steps to restrict modify user operation for the users belonging to specific organization in OIM 11gR2. The condition which I specified under Authorization Policy in APM console is not triggering at all.
Thanks!

PS/cj20n User Fields name

Dear ABAPERS,
PS/CJ20N has a tab in activitie(s) called "User fields". In the User fields tab, there is a field key called Regin and estimate identification, in this there is an estimate No. text box which shows the structure AFVGD-USR00).Will anyone pls. tell me the table and field name of estimate no. text box.
Thanks And Regards,
Muhammad Sohail

Firstly,
Region and Estimate Identification are names defined by your organization, the standard names for those fields are Field1 Field2 etc...
Secondly, the table you are looking for is AFVU.
pk
Repetitive answer because of the current caching problems in SCN
Edited by: kishan P on May 20, 2009 11:45 AM

Can approver modify user's request form in OIM 11g?

Dear All,
In OIM 10g, the approver of a request can modify user's request form, we just need to configure the permission in OIM. But, can we do it in OIM 11g?
If can, how can i configure it?
really need your help guys,, :D
Thank you,
--herry

Hi user12841694,
Thanks for the suggestion. But, the data (field) that can be modified by the approver is very limited. We cannot attach multi-valued attribute there (like Child Form).
Regards,
---herry

Additioanl user-field in approval detail screen

Hello,
We would like to add the shopping cart number as a user field in the detail screen of the SC approval trx. (BBPSC07)
In the detail screen in the standard SRM 5.0 the only field which are displayed are (in the additional especifications):
Name of Shopping cart ....
Notes for approval...
We want to let appear here als the SC number.
Im not sure we can acomplish this by using note 672960
This note is about adding fields to documents, not about adding fields in trx.
Anyone done this before? Please help me out.
Thanks,
Aart

Hi,
This seems to be bit difficult....However you could try modifying the ITS template to display the SC number which is a std field.
Look at these threads which discuss similar reqt:
Add Custom field in Approval Screen
Custom Field in Check Status
BR,
Disha.
Do reward points for useful answers.

User with authorization to modify an specific field into the G/L Account

Hi everyone,
I´d would like to know if It´s possile GIVE AUTHORITY ONLY to some users will be able to modify the field SKB1 - ALTKT into the G/L Account Master Data through transacction FS02. In this way, only the selected users could introduce or modify information on this field.
I´m not sure if it can be done trough a new Z object and assign the object to the transacction and also in the user profiles..or in other way...
Thanks a lot for your help ¡

Hello,
I'm worried but there is no field group authorization for G/L account like customers and vendors. In customers and vendors you're grouping your changable fields and give auth for it. But in G/L master data, there is no solution like this.
So I think you can use business transaction event for validation. You should use 00002310 BTE for this action.
In this exit, you can validate I_SKB1-ALTKT is equal to SKB1-ALTKT for special user. You should create a user parameter like ZALKT and this 'X' value to this parameter for special user. And check user auth for parameter ZALKT = 'X' and then if it's ok compare I_SKB1 and database table SKB1 for ALTKT field. If this two value doesn't equal you can give error message while saving G/L account changes.
Regards,
Burak

Modify User (OIM 11gR2 PS1): How to enable "submit" button for custom udf fields?

I made some new attributes following oracle documentation for create user, modify user, and view user details forms. create user and view user details are working fine, but I'm not being able to copy/paste the following code in custom modify user attributes to enable the submit button for modify user form change: #{pageFlowScope.cartDetailStateBean.attributeValueChangedListener} . Any ideas? Thanks.

Export the sandbox and edit userModifyForm.jsff to set value change listener property for the new attribute as below
valueChangeListener="#{pageFlowScope.cartDetailStateBean.attributeValueChangedListener}"
http://docs.oracle.com/cd/E27559_01/admin.1112/e27149/customattr.htm#autoId4

After 10.1.2 upgrade, Create/Modify User/Group requires re-authentication

I have 3 systems - 2 were 9.x (AS10g R1) upgraded to 10.x (AS10g R2), 1 was installed as 10.x. On the two upgraded systems, after a Portal user logs in (with administration privileges), navigates to the "Administration" tab and clicks either the "Create New User", "Modify User", "Create New Group" or "Modify Group" links, they are prompted for a username and password again. On the system installed with 10.x, this does not happen. Submitted iTar was unresolved. Has anyone seen this before?
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Modify User Postprocess event handler

Hi All,
Can some one tell me how to fetch complete set of user data in orchestration while i trigger my update event handler.?
eg
I have a event handler which is working fine on create user operation.(populates a custom udf Country based on employee type and another filed called city)
Now in my update if i update my city country shd be updated,but orchestration only returns values for the fields which are updated and not all,my employee type is returned as NULL,which makes my code to fail
Can anyone tell me how to get the existing data in orchestration?
I hope I am able to explain my scenario
Thanks

You can get all the attributes from Identity array or User
Check this
Re: EventHandler - How to get user Key
To modify user attribute
Urgent help required: Event Handlers
You can get lots of post related to you question.
HTH

How to add a new tab on modify user form

Hi,
In OIM11g, we can assign roles to a user using a tab named Roles in the modify user form. I want to add a new custom tab alongside all the already present tabs.
The new custom attribute functions the same as 'Roles' in OIM.
Does OIM11g provide any functionlity to do so?
Thanks..

Have you seen the 11g tutorial thing about adding a Custom ADF tabs in OIM Self Service Console at
http://apex.oracle.com/pls/apex/f?p=9830:37:3242381082783477::NO:RIR:IR_PRODUCT,IR_PRODUCT_SUITE,IR_PRODUCT_COMPONENT,IR_RELEASE,IR_TYPE,IRC_ROWFILTER,IR_FUNCTIONAL_CATEGORY:,,,OIM_11g,,,
Is that any help?
Also, more general advice on customising OIM 11g is available at:
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm
Try metalink too because there may be examples of how to do stuff with OIM 11g there.
Good luck

User Field Selections with SAP Asset Report RAGITT_ALV01

Hi,
We are running RAGITT_ALV01 (Asset History Sheet) report and wish to utilize some user fields (ANLU) in data selection. How might this be done? I find when using "List Assets" under "Settings" tab the asset number , sub asset numbers and associated user fields remain. However when using "Main Numbers Only" or "Group Totals Only" under this same tab, sub asset number and associated fields are not to be found and accumulations already include all assets with a given asset number with no opportunity to apply user field data selection criterion which would eliminate some assets included .
Thank you for your time, harold

Hi,
Sorry to have taken so long to reply, and thank you for suggestion. We already have our "Z" copy of this program and have been processing from this for some period of time. The problem occurs when trying to apply user fields (ANLU) to data selection criterion for reporting options "Main Numbers Only" and "Group Totals Only". Asset numbers (main and sub) disappear during R3 data base processing never to be seen intact again. Have traced this through and may have solution for "Main Numbers Only" option. Testing is occurring on this "work around". However the third option "Group Totals Only" solution still evades capture. If you have any more ideas please pass along to me. Again thank you for your time and effort. harold

How to remove fields from the default user portal page ?

Hi Travis,
How do I modify the page that display after submitting the ticket. These plugins are helpful to modify portal's home page only. Please advise if I'm missing anything.
Thank you

I like to remove the right hand side ticket history field that displays after user submit a new issue.
This topic first appeared in the Spiceworks Community

How to diable only one field enabled and other fields disabled for one user group?

Hi,
I have a form contains many fields. A group of users can add items using that form.
As per the user requirement I have created a filtered view and that filtered view can be seen by some other sharepoint user group but as per their further requirement the new sharepoint user group is only allowed to update Remarks field. All other fields
should be disabled for them.
In my idea, I have to create multiple forms and in one of it except Remarks field all should be disabled but I am unable to assign multiple forms to a single list.
Or how to make Remarks field enable to this user group and for other admin user group all fields could be enabled.
Hope I have expressed my question correctly.
Any solution would be appreciated.

There is no Out of the Box way to set permissions on each column, primarily due to the performance impact. The following thread provides some options,
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c0794232-9bab-4cea-91d8-f311a793a863/how-to-set-column-wise-permission-in-sharepint-list-in-sharepoint-2010?forum=sharepointadminprevious
Dimitri Ayrapetov (MCSE: SharePoint)

Limit user fields seen in Modify User Approval Request task - 11g R2

Similar Messages

Maybe you are looking for