Limit wireless connection to one connection only. Is that possible?

Hi,
Is it possible to limit wireless connection to allow only one computer to connect to wireless?
Thank you.

Yes. Secure your connection with WPA or WPA2. Provide the passphrase or pass key to that computer only. That should do it.

Similar Messages

Oracle client 8i connecting to one node only

Hello all,
I had 2 node RAC database setup, in which when a person in development team tries to connect to the RAC database via oracle client,He can able to connect to one node only,when i tried tnsping80 utility it showing one VIP address
He using oracle 8i client on windows7
Database is 10G RAC and load balance is on in both database and client
please provide the solution

Hi,
Also I am not sure whether 8i client is certified with 10g database or not.
Do you have a metalink account. Read this Doc ID 207303.1
Regards

End users connecting to one node only !!

Hi,
I am new to RAC. My environment: 10gAS (two nodes), 11gr2 RAC (2 nodes), on solaris10. I see all end users connecting to one node only. where other node is fine.
SQL> select a.inst_id,instance_name,program from gv$INSTANCE a, gv$session b where a.inst_id=b.inst_id and
2 username like 'HRAPPS';
INST_ID INSTANCE_NAME PROGRAM
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 java@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode2 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
1 mod11g1 frmweb@asnode1 (TNS V1-V3)
tnsnames.ora on two application server nodes
CONNDB11 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = racdb1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = racdb2-vip)(PORT = 1521))
(LOAD_BALANCE = OFF)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = mod11g)
grid@*racdb1* $ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE racdb1
ora.FRA.dg ora....up.type ONLINE ONLINE racdb1
ora....ER.lsnr ora....er.type ONLINE ONLINE racdb1
ora....N1.lsnr ora....er.type ONLINE ONLINE racdb2
ora....N2.lsnr ora....er.type ONLINE ONLINE racdb1
ora....N3.lsnr ora....er.type ONLINE ONLINE racdb1
ora.asm ora.asm.type ONLINE ONLINE racdb1
ora.eons ora.eons.type ONLINE ONLINE racdb1
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora.mod11g.db ora....se.type ONLINE ONLINE racdb2
ora....network ora....rk.type ONLINE ONLINE racdb1
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE racdb1
ora....SM1.asm application ONLINE ONLINE racdb1
ora....B1.lsnr application ONLINE ONLINE racdb1
ora.racdb1.gsd application OFFLINE OFFLINE
ora.racdb1.ons application ONLINE ONLINE racdb1
ora.racdb1.vip ora....t1.type ONLINE ONLINE racdb1
ora....SM2.asm application ONLINE ONLINE racdb2
ora....B2.lsnr application ONLINE ONLINE racdb2
ora.racdb2.gsd application OFFLINE OFFLINE
ora.racdb2.ons application ONLINE ONLINE racdb2
ora.racdb2.vip ora....t1.type ONLINE ONLINE racdb2
ora.scan1.vip ora....ip.type ONLINE ONLINE racdb2
ora.scan2.vip ora....ip.type ONLINE ONLINE racdb1
ora.scan3.vip ora....ip.type ONLINE ONLINE racdb1
grid@*racdb2* $ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE racdb1
ora.FRA.dg ora....up.type ONLINE ONLINE racdb1
ora....ER.lsnr ora....er.type ONLINE ONLINE racdb1
ora....N1.lsnr ora....er.type ONLINE ONLINE racdb2
ora....N2.lsnr ora....er.type ONLINE ONLINE racdb1
ora....N3.lsnr ora....er.type ONLINE ONLINE racdb1
ora.asm ora.asm.type ONLINE ONLINE racdb1
ora.eons ora.eons.type ONLINE ONLINE racdb1
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora.mod11g.db ora....se.type ONLINE ONLINE racdb2
ora....network ora....rk.type ONLINE ONLINE racdb1
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE racdb1
ora....SM1.asm application ONLINE ONLINE racdb1
ora....B1.lsnr application ONLINE ONLINE racdb1
ora.racdb1.gsd application OFFLINE OFFLINE
ora.racdb1.ons application ONLINE ONLINE racdb1
ora.racdb1.vip ora....t1.type ONLINE ONLINE racdb1
ora....SM2.asm application ONLINE ONLINE racdb2
ora....B2.lsnr application ONLINE ONLINE racdb2
ora.racdb2.gsd application OFFLINE OFFLINE
ora.racdb2.ons application ONLINE ONLINE racdb2
ora.racdb2.vip ora....t1.type ONLINE ONLINE racdb2
ora.scan1.vip ora....ip.type ONLINE ONLINE racdb2
ora.scan2.vip ora....ip.type ONLINE ONLINE racdb1
ora.scan3.vip ora....ip.type ONLINE ONLINE racdb1
please advise,,,,
thanks

Thanks every one responded. I have modified tns entry in application servers (load balance on). I will post details, once I am back in seat.
Thanks a lot guys...
Bjoe, I am using SCAN listener, details are :
racdb1
-bash-3.00$ lsnrctl status
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 27-OCT-2010 17:04:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Start Date 12-OCT-2010 13:08:46
Uptime 15 days 3 hr. 56 min. 9 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/racdb1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.11)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.20)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "mod11g" has 1 instance(s).
Instance "mod11g1", status READY, has 1 handler(s) for this service...
Service "mod11gXDB" has 1 instance(s).
Instance "mod11g1", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter remote
NAME TYPE VALUE
remote_dependencies_mode string TIMESTAMP
remote_listener string rac-scan.mod.com:1521
remote_login_passwordfile string EXCLUSIVE
remote_os_authent boolean FALSE
remote_os_roles boolean FALSE
result_cache_remote_expiration integer 0
racdb2
-bash-3.00$ lsnrctl status
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 27-OCT-2010 17:15:35
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Start Date 27-OCT-2010 03:25:50
Uptime 0 days 13 hr. 49 min. 45 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/racdb2/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.12)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.21)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM2", status READY, has 1 handler(s) for this service...
Service "mod11g" has 1 instance(s).
Instance "mod11g2", status READY, has 1 handler(s) for this service...
Service "mod11gXDB" has 1 instance(s).
Instance "mod11g2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter remote
NAME TYPE VALUE
remote_dependencies_mode string TIMESTAMP
remote_listener string rac-scan.mod.com:1521
remote_login_passwordfile string EXCLUSIVE
remote_os_authent boolean FALSE
remote_os_roles boolean FALSE
Edited by: userR12 on Oct 27, 2010 7:34 AM

Can limit my users to one connection or even 2 on the database per username

Our end-users access our database via a Jave based form front end after installing JInitiator on the PC
Does anyone know if there Is anyway i can limit my users to one connection or even 2 on the database per username.
Could i also have timeout on each session on idle time in order that when the connection is idle for say 10 minutes the users session is automatically logged off the db.
Any helpp will be appriciated.
D

Hi,
>>or even 2 on the database per username ...
timeout on each session on idle time in order that when the connection is idle for say
10 minutes ...
Just an example:
C:\>sqlplus system/password
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Nov 16 17:06:50 2007
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SYSTEM@ORACLE10> alter system set resource_limit = true;
System altered.
SYSTEM@ORACLE10> create profile test limit idle_time 10 sessions_per_user 2;
Profile created.
SYSTEM@ORACLE10> alter user legatti profile test;
User altered.
Session 1
C:\>sqlplus LEGATTI/password
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Nov 16 17:07:39 2007
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
LEGATTI@ORACLE10>
Session 2
C:\>sqlplus LEGATTI/password
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Nov 16 17:07:39 2007
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
LEGATTI@ORACLE10>
Session 3
C:\>sqlplus LEGATTI/password
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Nov 16 17:08:24 2007
Copyright (c) 1982, 2004, Oracle. All rights reserved.
ERROR:
ORA-02391: exceeded simultaneous SESSIONS_PER_USER limit
Enter user-name:Cheers

Very slow email connection on one mailserver only

I will try and keep it short but it is complex (to me!):
I have suddenly, since Friday 2 March, experienced very slow connection to one of my ISP's mailservers. Emails without attachments work ok'ish (a little "hesitantly"), emails with attachments of moderate sizes (eg. +/- 500 KB) download/upload extremely slowly and most of the time fail. I have asked my ISP, who are generally helpful, and they have tested the mailserver and can find nothing wrong. So, here we go:
The problem is both for ethernet and wireless.
The problem is for one account only. I have a different account with the same ISP, but on a different mailserver, which works absolutely fine.
Two different Macs have the same problem. The other PCs with different ISP's accounts work fine.
Router is working fine with good internet connection and email via one of the two accounts works fine.
It is not a problem on my computer (since it is the same issue for two machines). Both run OSX 10.6.8
I have tried both Entourage and Outlook on both machines; same problem everywhere - one account works, the other doesn't (properly).
I have tried with my iPhone, using the same wireless connection and same account details, and it downloads emails with attachments speedily - emails that failed to download on the MBP/Outlook.
I have tried one of the machines (a MacBook Pro) at home with a different wireless connection but to the same mailserver and it works fine there!
This happened last Friday and no settings have been changed locally for months.
My conclusion is (but may be wrong):
The router is fine
The macs are fine
The email clients are fine
General connection to internet and mail is fine
The mailserver is probably fine
But a connection between one mailserver account and the two macs has suddenly gone wrong.
It is almost as if there is a setting on either the mailserver saying "I don't like that connection to that place, I will slow it down." or somewhere in this place saying "I don't like that account on that mailserver, I will slow it down."
The question then is:
Which network setting is so specific that it can be this selective? And why did it suddenly happen?
I don't seem to get anywhere, so I'm trying the communities. Any help much appreciated!

Update: After two weeks of scratching my head trying to find any local settings (computer or router) that were specific enough and after really not doing anything at all, normal service resumed suddenly. I have now had a good short week without any disruption or speed issues. The problem that was is still a mystery, though.

I want to create a network so that I can share a printer, but I don't want to connect it to the internet. It is just for the laptops to connect to the printer. Is that possible with the airport express?

I think I should be able to, but both at the apple store and when I called apple, the sales people told me it can't be done.
I've read the manuals for both the express and the extreme, and I can't see why this is not possible.
Can anyone enlighten me on this?

Yes, this is possible ... but understand that you would need two switch wireless networks between network/Internet access and for printing.
The AirPort would not get a Public IP address, but it would have a Private IP address of 10.0.1.1 ... and it would be providing wireless clients connected to it with Private IP addresses in the 10.0.1.2 - 10.0.1.200 range.
AirPort Utility > Select the AirPort > Manual Setup > AirPort > Wireless
Wireless Mode: Create a wireless network
Wireless Network Name: <enter a desired Network Name or SSID>
Radio Mode: <leave the default or select a desired radio mode>
Channel: Automatic
Wireless Security: <select the desired wireless security type>
Internet > Internet Connection
Connect Using: Ethernet
Connection Sharing: Distribute a range of IP addresses
Internet > TCP/IP
Configure IPv4: Manually
IP Address: 10.0.1.1
Subnet Mask: 255.255.255.0
Router Address: 10.0.1.1
DNS Server(s): <leave blank>
Domain Name: <leave blank>
Internet > DHCP
DHCP Beginning Address: <leave default or change to a desired starting address>
DHCP Ending Address: <leave default or change to a desired ending address>
Advanced > Logging & Statistics
Allow SNMP (unchecked)
The AirPort will still report at least three errors: 1) Configuration of WAN, 2) SNMP over WAN, and 3) Double NAT. These can all be safely ignored to stop the AirPort's status light from flashing amber in this configuration.

HT4437 i want to air play and apple tv in one device. Is that possible

I am finding it all a little confusing. I like the functionality of the airport express but wonder if the apple tv device allows the same with music and also adds the option to display on the tv?
I currently use an ethernet connection to link my SONY internet tv to my broadband. I watch iplayer and lovefilm on the TV. I want to be able to use Airplay to link my itunes via my iphone/ipod or ipad to the AV system. I have phone connections and optical connections on my AV system but not ethernet or Airplay.
Can I use the apple TV to act as both the video display, keep my options to watch internet TV but also added options around the Apple TV AND with the same device connect the optical link to my AV system and enjoy itunes music?
Thanks

the appletv will work with airplay audio and airplay AV
the appletv will connect to the tv using hdmi and optical for audio if you want
the appletv when connected by hdmi does not remove other features from your setup it does not have the power to block your current options to watch internet tv unless you don't have enough hdmi ports

Wireless Router WRT54GS - One connection bumps the other computer off...

I've set up the Wireless Network using the direct console setup as specified by the instructions to set up via Cable Internet connection.
The wireless network seems to work fine, but the direct connection via Network cable the internet connection works for a little bit and then is bumped off. When I unplug the cable and then plug it back in, the PC connection works (for a time) but then I get a "conflict has occured with another computer on the network with the same ip" message. Eventually one of the computers is bumped off the connection. Is the redundant IP the problem, and if so, how can I fix this?
Thanks, Zach

Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!

Connection in one direction only for MacBook

My airport network has worked fine for years with several computers and printers. Recently however a problem has developed. After awakening from sleep or from a restart my MacBook cannot connect to the other computers on the network. If I connect in the reverse direction, from one of the other computers to the macbook, there is no problem, and afterwards I can then connect from the MacBook to any other computer on the network. I haven't chaged any settings on the network properties, passwords, etc. Any idea why this is happening?

Acros-Krik
I did my reset and it seems to have speeded up the 3G iPhone somewhat but not cured these syncing anomalies.
I am syncing three way
Mobileme
MacBook iCal
iPhone iCal.
I have sent test diary dates from each source
Mobileme and iCal are playing nicely but the iPhone is sulking and won't receive or send diary events.
In my iPhone my Systems Prefs are...
Accounts: mobileme
Fetch new data: Push
my email on my iPhone is working well with email Mobileme and email on the MacBook is also working well with Mobileme.
curiouser and curiouser.

Blog Loads Slow and Intermittent Internet Connection for One Site Only

Hi
Yesterday we had a site where the blog lost it's feed, but was restore after a chat with support. Today the blog post are not coming up in the admin. I can see the list, but the not the post as the flywheel keeps spinning and spinning.
When I go online, I can get to the blog fine, but when I click on the pagination links below or try to do a reload, the entire page gets lost or server can not be found.
I have re-uploaded all the Layouts and Templates, but with no change.
Anyone else having this issue, or is there something wrong with this site's blog?
All other pages and features are accessible from the browser and admin, just not the blog.
Thanks, Teejay

Hi Teejay,
If still experiencing troubles with your blogs please provide the following details so we can attempt to replicate on our end..
- blog name or url
- steps you are taking (where you are noticing the slowness)
Or if you would rather you could also provide a quick video cast or your experience so we can investigate further.
- http://www.techsmith.com/jing.html
Kind regards,
-Sidney

Connecting USB as "Charge Only" no longer possible after update?

Hi there,
I just ran the update this morning, and no longer have the option of connecting my USB in Charge-only mode. Is there any way to get this feature back? Certain apps (such as Audible) won't work if the phone is in PC mode. Any suggestions? (And why on earth would you remove a feature like that? Very frustrating!)
Thanks!

This is something that ones have asked in the Past. I have answered in this Kind of Way the Charger that Came with the Phone was Designed and met to Charge it. No other Device other than a O.E.M Motorola Charger or Style of Way. This is What Motorola hopes that one's will do and it will have better results for the Phone in the Long Run.. I agree with Motorola and i have been a Motorola Owner Since the 1990's..b33
Have a look at Tip 20 witch i put here Just Click on the Link:
20. Re: Tips On How TO USE I.C.S ON RAZR / RAZR MAXX

My mom and me want to use the iPod on two computers, one Mac and one Windows. Is that possible or will it destroy the iPod?

My mom has a Windows computer, I have a Mac, and we have an iPod nano 6th generation. Is it possible to use the iPod with both the Windows and the Mac? And does it add the music and playlists but not delete?
Thank you,
Jan

Hey, thank you so much.
But now: I can add Musik, but it won't load the Cs-covers and the play lists on the iPod. I did it the way they tell me to do it. I just grabbed it and put it into the iPod. I can see the lists on the computer, but not on hte iPod in the menu.
how can I get the play lists?
Thank you.
Jan

Connecting two EA2700 routers (wireless) and enable LAN connection on both

Hi all,
I have just bought two EA2700 routers, and I simply cannot perform the setup.
I have the first router connected to the modem, and need the secon router to connect to the first through wireless to extend the range. Secondly, I want to enable LAN connection from the second router to e.g. a computer, PS4 etc.
After having spend a lot of time on searching for at guide, I have given up... I really hope, that you are able to help me on this matter.
Thanks a lot in advance..

Hello Acsadac. Are you setting up the 2nd EA2700 to act as a range extender (wirelessly connected to the 1st EA2700)? If you are, then it's not possible. You can do one of two things, though.
1. LAN to LAN. Configure the 2nd EA2700 as a switch. This will act akin to a range extender (for both wired and wireless connections) but you'll be using a long ethernet cable.
2. LAN to WAN. Configure it as a secondary router. This way, you have 2 separate wireless networks in one connection. Again, you will need a long ethernet cable for this kind of setup.
Here's a link on how to configure the 2 EA2700s:
Cascading or Connecting a Linksys router to another router

Two wireless router/modems, one USB printer, one shared hard drive

Hi, I am looking to use my new mac mini server to do the following:
1) Link my two separate modems together into one network (Ethernet link aggregation?)
- FYI; I also have an airport extreme, and possibly an extra mac mini at my disposal
2) Share a hard drive both internally and via a new FTP
3) Share a printer that currently only works when connected to one network.
Is it possible? Do I need to buy any additional hardware?
Please feel free to go into as much detail as you can!

You will likely want a mid-grade gateway with load balancing and link failover, and probably also public DNS services with both of your IP addresses returned in round-robin.
I would not recommend tussling with a Mac to (try to) make it into an IP gateway/firewall/router device.
[Here is a selection process for a gateway/firewall/router widget|http://labs.hoffmanlabs.com/node/1724] for a server.
The printer and the rest of the stuff located behind the box is secondary picking a box with the expected features, and then port-forwarding or VPN access will be available to, well, whatever.
Big video (serving) activity can easily exceed the bandwidth available with DSL links.

Power the Camera Connection Kit to connect card readers or other devices

I need to connect my Sony Memory Stick to iPad to load the photos from my Sony camera's memory card. As you all know, Apple has decided to lower the power on the Camera Connection Kit (CCK) USB to 20mA, making my memory card reader worthless (for those with SD, you have the CCK SD option but I hear not all SDs work with it).
I've been looking for a "compact" powered USB hub to connect my iPad to Memory Card Reader. I came across this USB split cable, one for power and other for the regular connection - Apricon Powered USB
http://www.amazon.com/Apricorn-Power-Adapter-Cable-AUSB-Y/dp/B000JIOHDE/
This may seem to work but wanted to check if anyone has tried it ? I would connect the black male port in CCK, grey male port in iPad charger and plug my card reader in the female port. Not sure if it will work. Any thoughts ?
There was a review on Amazon's page about someone trying with iPad and the follow up comments on parallel wiring vs. limiting with diode.
http://www.amazon.com/review/R2XVMOSBFNYCLG
I don't understand all that stuff, curious if anyone here does and can comment.

This cable has a very different use in mind. It is for connecting one USB device to two powered USB ports on a computer to provide extra power to the USB device that would it not ordinarily be getting were it only connected to one USB port.
That is a very different use from the one for which you wish to use it. Chances are it may not work as you envision using it.
Dah•veed

Limit wireless connection to one connection only. Is that possible?

Similar Messages

Maybe you are looking for