Limitation of chart values

Dear folks,
We are having a problem with the chart limitation in Excel / Webi.
The limitation for values for a char in Excel ist 32767 values.
For us this is not enough because we have around 42000 values to display.
In Webi I belive the limitation might be around the same.
Does anyone have an Idea how we can achieve a workaround ??
Thanks for your help,
Andreas

Hello Stratos,
Thanks for reply.
We a reporting on 15 Minute Values in one Year.
The problem if we reduce the granularity the chart is worthless - cos the peaks must be visible.
This means on 1 Axis we have the values and on the other the time.
4x24x365 = 35040
(42000 wasnt correct )
Do you have an idea?
Thanks and have a nice weekend.
Andreas

Similar Messages

Show tooltip on click of chart values in line chart

I have given a task, where i need to show tool tip on click of the chart values. That tool tip should also have a close button. Tool tip should be closed only when a user clicks the close buttton or when the user clicks on other chart values.
Thanks in advance...

I have given a task, where i need to show tool tip on click of the chart values. That tool tip should also have a close button. Tool tip should be closed only when a user clicks the close buttton or when the user clicks on other chart values.
Thanks in advance...

Get chart Values

Hi experts,
I want to retrieve the date value from this graph and I've been wondering is there a way to retrieve a chart axis value without using the model?
I tried to do this:
var model = sap.ui.getCore().getModel("dataQuery"); // dataQuery is my model
var indexFromChart = oControlEvent.getParameter("data")[0].data[0].ctx.path.dii_a1; // that retrieve the id
var monthValue = model.getProperty("/DUMP" +indexFromChart+); // Dump is the path in my model that gives me the months value
but as when I do model.getProperty("/) the result is like this
DUMP(dateStep='02.2014',numberOfAlerts='3728',sid=''): Object
I can't retrieve the values form the chart
the result is always: undifined
Any help would be greatly appreciated!
Regards,
Jean Max

Hi Jean Max,
you can refer discussion in thread How to get value of selected part in sap.viz.ui5.pie chart
in that example, it is shown how to read chart value of pie chart. with few modification, you will be able to get the result for your requirement.
Regards,
Chandra

Chart value formatting

Hi all,
I want to format the chart value. There is a chart which is bar-line chart. From chart properties, when i check the "show values" option the value of both bar and line is shown.
The chart contain two bars and three lines. Among three lines, two lines show negative value. While showing these two lines the value of these lines are shown just on markers of the line.
Some times these negative values are not clear as these are on markers.
Is there any way to show the value of the line below the markers of the line of a bar-line chart.
thanks in advance

hi,
As there is no option/setting which will control the position of display of values w.r.t data marker,
One way to highlight the values when overlappng with data markers is to use background color.
Also, border can be used.
Data -> values -> Background Color.
Regards,
Vamsee

Change Chart Values using Datepicker

Hi Experts,
How to change the chart values using Date Picker.
It is possible to do in apex.
Regards,
Upendran

This is the Application Express Listener Forum.
Please post in Application Express forum.

Pie Chart Value Unit

Hello,
I am using APEX4,
i want to add à personnalised unit or a specefic symbol like '%' for each value of the chart.
for example i tried to use this syntax :
select null link, libelle , value||'%' from table
but i have error
any idea please,
Thanx

Hi Ouadah,
I would recommend that you edit your chart, and review the options available to you on the Chart Attributes page. You can declaratively change the appearance of your chart, based upon the settings on that page. For example, if you wish to a prefix character of € to currency values, simply enter the character in the Values: Prefix text field. Similarly, to apply a postfix to your chart values, update the Values Postfix text field to hold the percentage characters, %. You do not need to modify the chart query in order to apply such changes to your chart.
Regards,
Hilary

Free Form Template and Combining Chart Values during Runtim

Hi Guys,
Need your expertise on this. We received some unreasonable request for the following:
1. Free Form Template DURING Runtime
- moving charts from one place to another by dragging them from one place to another during runtime
2. Combining of Chart values during Runtime
-to be able to mash-up 2 different charts during runtime. For example, dragging a chart to another chart
would result to a combined-value of chart. For instance, you have a Sales Chart and a Production Chart,
if and when Sales Chart is dragged and placed on top of Production Chart then it would mash-up the values
and will produce only one chart.
Is this even possible?
Hope you guys can help.
Kind Regards and Many Thanks,
Mark

Hi Mark
1. Free form template is not possible with current version of Dashboard Designer. You may use the option of Dynamic Visibility to simulate this. But this might not serve your requirement 100 %.
2. Your requirement of mixing up chart just by dragging and droping on another is coming under Designing part. For designing we need software, in my point of view. Xcelsius is a Tool to generate required output in various formats. Here we need to finalise the output such as chart type/ data to be displayed/ format to be displayed, etc and while viewing we may play with data but not with objects other than dynamic visibility.
Hope this clarifies.
With best wishes
BaaRaa.

Issue with chart values!

Hi to all,
I hope if any one can help me out with this issue related to pie chart value information. To start I need to let you know what I have in my report so you will have a clear idea on what I'm trying to view in my report.
I'm running:
Opportunity-Product History report
Fields:
Business Area (4 different Business Areas (example: east, west north, south))
Revenue
The issue I’m having related to the revenue values of each Business Areas.
For example I can see the 4 different Business Areas on my pie chart, but the value (revenue) of all Opportunities for a specific Business Area “east” not equal to the total Revenue for “east” in my table below. It will show only the value $ for one of the opportunity in this Business Area “east”. But if I drill into Business Area “east” it will show me all the opportunities with all right values $$
My quest is how can I show the total amount of revenue in my chart with out drilling into each Business Area
Thanks,

Hi bvuHH,
According to your description, you checked "Show Data Labels" to show labels in the chart, if the data is too small, the label will be displayed outside the bar, the color of label and background of the chart is the same, and labels become unreadable.
According to my test, if the value of data is too small, the label will be displayed outside the bar area by design. As a workaround, we can change the color of label by following steps:
Right-click label and open Series Label Properties dialog box.
Click Font in left pane, click drop-down arrow next to Color and select a color, then click OK.
Besides, we can set background color of label by following steps:
Right-click label and open Series Label Properties dialog box.
Click Fill in left pane, click drop-down arrow next to Color, then select a color and click OK.
In addition, we can also change color of chart area by following steps:
Right-click chart area and open Chart Area Properties dialog box.
Click Fill in left pane, in Pick color section, click drop-down arrow next to Color, then select a color and click OK.
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Font size in Chart Value Axis & Category Axis In VC 7.0

in visual composer i want the font size should be big size in chart value axix and category axis ?

i think the only way to do that right now would be to not input any text for a Table or chart title , or maybe put in a blank space for it
and then create a transparent form , in that transparent form add the HTML text, have it formatted to the size and color you want and then in the layout tab position it in such a way which it looks like the title of that chart
i have this implemented in a few of my dashboards where i require dynamic text it works well

Duplicate Dial Chart Values

Hey Everyone,
This must be easy to solve, but my searches have yet to reveal the answer. I just created a simple chart based on the average value from a table. Here is my source query:
SELECT AVG(TIME_VAL) VALUE, 5 MAX, MIN(TIME_VAL) LOW, MAX(TIME_VAL) HIGH FROM PROJECT_SURVEYS
However, on the output chart I get values of 0,0,1,1,2,2,3,3,4,4,5,5. Why??
Mike

Hey,
Not too sure what you mean here. The label is derived from the value (AVG(TIME_VAL)). I tried removing the labels, but I get exactly that - no labels.
I just experimented with decimal places and it seems to work 'properly' now. I changed it to 2 decimal places and now my values show as:
0.00
0.50
1.00
1.50
Shouldn't this have worked with 1 decimal place, which I tried, because it would be nice to only show the one?? Also, how could I go about removing the labels for these intermediate (0.50) ticks?? Any thoughts are appreciated,
I just tried a 'tick spacing' of 1. This is nice for limiting the labels, intervals, but it would still be nice to be able to use 'intermediate' and unlabelled ticks. What I have now will suffice however,
Mike
Message was edited by:
given2fly

Can't remove decimals from chart value axis

After several hours trying to create a simple bar graph in Pages and the same in Numbers (iWork '08) for a class assignment, I am at a loss. To any kind soul who can help, I will be very grateful.
Here is the dilemma.
In Numbers as well as trying this in Pages '08, I selected a blank document, clicked on the Chart icon, and in the Chart Data Editor I entered titles for 2 rows, and title for 3 columns along with their values. Then in the Chart Inspector I entered the following values under Value Axis Format: minimum= 3, Maximum= 26, and Steps=9.
I Need to have along the y-axis (the left column, from bottom to top) the numbers starting from 3 up to 26, in increments of 3, i.e. 3-6-9-12-15-18-21-24 and at the top 26.
I have the correct sets of columns which is: 3 sets of bar graphs (2 bars side-by-side, 3 sets).
The problem I have is that I NEED the left column of numbers, my y-axis, to be whole numbers. But Pages keeps converting them into whole numbers with 3 decimal places to the right. How can I fix this? I also keep running into a problem when entering values in Minimum-Maximum-Steps, in which I'll put 26 or 27 as a Maximum, 3 in Steps, and the Max changes to something like 96. This happens a lot, although the number changes to different values than what I enter. My Chart is a standard chart, not a stacked chart. I've tried searching and find no answers to this. And I do need the step increments to be exactly as I stated. There must be a way. I tried it in Excel 2002, and was able to do the entire chart in about 5 minutes. Numbers must be able to do this, I'm not even using calculations or formulas.
I would insert a picture of the way the chart needs to look here, but I don't know how to do that in Posting this question.
In God's Harmony,
RODDY

It would be useful to give us the used values so we may give you a response.
I made a test with this setting:
Minimum 5.0
Maximum 9.5
Steps 5
and I got: 5.0, 5.9, 6.8, 7.7, 8.6, 9.5
which is perfectly correct.
It's our duty to check that ((Maximum - Minimum) / Steps) * 10 is an integer.
Yvan KOENIG (from FRANCE lundi 8 septembre 2008 15:19:14)

BAPI_PO_CHANGE - changing overall limits and expected value to 0.

Hi,
I created a normal purchase order with a service item is srm (the overall
limit and the expected value are filled). In R/3 system the corresponding
PO got created.
After that, in SRM we change the overall limit and the expected value to zero.
In R/3 system the net price is updated, but the overall limit and
the expected value are not updated. Could you please help me witht this?
Thanks in Advance,
Best Regards,
Vidya
Edited by: Vidya K Moorthy on Mar 18, 2009 3:06 PM

Finally found the answer.
BAPI_PO_CHNAGE does not support this functionality to delete limits.

Problem with chart values

hi, i've got a simple chart. my xaxis values are: 10:00:00(time), a can't make those values such as that: 1,2,3,4.... please help me
class BinaryPlot{
     final XYDataset data = createStepXYDataset();
     final JFreeChart chart1 = ChartFactory.createXYStepChart(
               "Input",
               "Time",
               "Binary Value",
               data,
               PlotOrientation.VERTICAL,
               true,
               true,
               false
     public static XYDataset createStepXYDataset(){
          final XYSeries s1 = new XYSeries("One",false,true);
          final Object[][] TEST_DATA = {
               {new Integer(1), new Integer(1)},
               {new Integer(2), new Integer(-1)},
               {new Integer(3), new Integer(-1)},
               {new Integer(7), new Integer(1)},
          for(int i = 0;i< TEST_DATA.length; i++){
               s1.add((Integer) TEST_DATA[0], (Integer) TEST_DATA[i][1]);
          final XYSeriesCollection dataset = new XYSeriesCollection();
          dataset.addSeries(s1);
          dataset.
          return dataset;
     XYPlot plot = (XYPlot)chart1.getPlot();
     NumberAxis axis = (NumberAxis)plot.getRangeAxis();
     ChartPanel chartPanel2 = new ChartPanel(chart1);
}//end BinaryPlot

Look at the query Andy proposed:
SELECT NULL LINK, start_date, NVL(sum_of_trans, 0) + 0.001 VALUE
FROM (SELECT   TRUNC (startdate) start_date,
                 CASE
                    WHEN :p9_view_by = 1
                       THEN ROUND (DURATION / 60, 3)
                    ELSE 1
                 END sum_of_trans
            FROM TRANSACTION
           WHERE trans_id = x AND startdate BETWEEN y AND z
        GROUP BY TRUNC (startdate)) xDoes this query deliver anything?
Denes Kubicek

Chart values are not displaying.

Hi Gurus,
We are in BI NW2004s SP11. Actually our web templets are publishing in EP.
For some of the charts are not displaying any values.
IGS_RFC_DEST version is 7000.0.8.1.
Can any one give me suggestion to fix the problem.
Thanks in advance.
Thanks
Raju.k

Hi Arun,
Some of the charts are in Line and Bar. When i check in IGS test here it is showing bar chart.
Still i am facing the problem. Is there any NOTE to apply? please suggest me.
Thanks in advance.
Thanks
Raju.k

Linking Pie Chart & Table to Bubble Chart Values

Hi All,
I am new to Xcelsius and I have an issue with my drilldown.
I have a Combo Box and choose Plants from this and my Bubble Chart updates according to the value in combo box.
Now I want to hover over the 'bubble' and want a Pie Chart and Table to reflect the values from that bubble. The value in the Bubble is a total and I want the Pie Chart and Table to be splits of this total - eg. Total of 50 employees but want the Pie Chart and Table to reflect splits per team.
I know the Destination Values from the Bubble Chart should be in the Pie Chart and the Drilldown should be enabled. However, the values that I want to show in the Pie Chart are different eg. Bubble Chart will say 50 but in the Pie Chart I want to see 5 segments of 10 - 50. ie. the Total of 50 split into the appropriate 5 teams. How do I create this linkage/drilldown where it takes the 50 and when I hover over this bubble, the Pie Chart shows the team split by looking up a different set of data. Have tried adding this into the drilldown area in the Pie Chart, where the source data is the split and the destination data is another area to pick up this data.
Any advice would be much appreciated.
Thanks,
Scott

Hi Maddy,
Thanks for the reply.
My scenario is :
In the Combo Box, you choose an Industry.
From each industry there are 4 values.
Industry      Employees     Int FTE     Ext FTE     Total FTE
Education     5000          5     8     13
Retail          40000          15     18     33 etc.
When I choose Education from the Combo Box, in the Bubble Chart I want to see a bubble for Education at the point of 5000 (X-axis) and 13 (Y-axis). This works fine.
I now want to hover over the Education u2018bubbleu2019 and the Pie Chart will show a split between Int FTE & Ext FTE u2013 ie. 5 & 8. I have added the relevant details to the drilldown and I still can't get this to work.
Also by hovering over the bubble, I want a table to change too, that shows a breakdown of what teams the Int FTE & Ext FTE is made up from and how many employees are in each team. This data is picked up from a different destination and I not sure how we link this to the data above.
Hope this helps.
Scott

Limitation of chart values

Similar Messages

Maybe you are looking for