Limitation of the entries in the drop down box of Interactive Report

Hi all,
Our team are currently using interactive report as an easy way to inquire the data stored in the database.
Our entire table had close to 2000 entries, and we notice some of the entries are not displayed in the drop down box when we cllck on the column heading. Probably the first 1000 entries showed up in the drop down box. The rest don't show up.
The drop down box is the one with the button sort ascending, sort descending, hide column, control break, and a textbox for user to type the data.
We are just wondering is this a number being set in Oracle Apex, and whether we can modify it.
FYI. we are using Apex 4.0, and Oracle 10.
Thanks,
Thomas.

Hi Thomas,
please have a look at http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/limits.htm#BGGEIHBG
The workaround is to define a custom LOV for the filter.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Similar Messages

  • I just sent the following in a drop down box that allowed reporting system problems:I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook:  Hardware Overview:    Model Name:     MacBook Pro   Model Identifier:     MacBo

    I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook:
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,4
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.53 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP53.00AC.B03
      SMC Version (system):          1.49f2
      Serial Number (system):          W8******7XJ
      Hardware UUID: ******
      Sudden Motion Sensor:
      State:          Enabled
    1. The scrolling, as far as I've been able to determine, is by using the slide bar to the right of most diplays. There are no up or down arrows that allow slow movement
    2. The top and botton toolbars are not visible. The top one appears when you point the arrow to the top of the screen but the same doesn't work well if at all pointing the cursor to the bottom.
    3. When downloading, something jumps to the upper right of the screen. I could point and click it and get a diplay if my downloads. I was attempting to fix some of the above. Now the little thing jumps off the screen and I can't get to it.
    4I was trying to installMacBook Pro EFI Firmware Update 2.3. I got message it couldn't be installed on my system.
    5. The red yellow and blue bullets that allow shutting down, minimizing and maximizing are missing on most open windows.
    Can you do something about these problems
    It's problematical that one can't communicate directly with Apple to resolve these problems
    <Edited By Host>

    1: I'm scrolling this page right now using the arrow keys.
    2: Press the escape (esc) key to exit full-screen mode. Select Apple menu > Dock > Turn Hiding Off.
    3: ???
    4: That's because you downloaded an update for another model.
    5: See 2.

  • I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click. How do I get version 4 to do this? Thanks.

    I have version 3.6.16 and when I login to my hotmail account, and type the first letter of the email address, a drop down box appears with my hotmail address and I can choose it from that box with a click.
    How do I get version 4 to do this?
    Thanks.

    The new but not-ready-for-prime-time autocomplete method searches for matches that contain the entered text, not just ones that begin with the string. Your options are:
    1) type in longer strings that narrow the search
    2) use an add-on to search just the beginnings:
    https://support.mozilla.org/en-US/questions/1037469
    3) install an older version of TB:
    http://ftp.mozilla.org/pub/mozilla.org/thunderbird/releases/

  • Getting the value from a Drop Down Box

    I'm working on a database project to keep track of our Blackberrys. The problem I'm having is entering the values for two drop down boxes. The page I'm working on enters the FirstName, LastName, Department, and Location. Department and Location have thier own Primary Keys and are foreign keys in the Person table. Departments and Locations are aligned by numbers like 1 = Ohio, 2 = Chicago. They
    don't automatically increase. The problem I'm having is entering them as a foreign key in the Person Table. I'm not sure if I use a getValue or getSelected or some other code to get the values to populate in the Person Table. I just keep getting a can't add department or location to table.
    public String newUser_action() {
    // TODO: Process the button click action. Return value is a navigation
    // case name where null will return to the same page.
    if (personDataProvider.canAppendRow()) {
    try {
    RowKey rowKey =
    personDataProvider.appendRow();
    personDataProvider.setValue(
    "DBO.PERSON.FIRSTNAME", rowKey,
    firstName.getText());
    personDataProvider.setValue(
    "DBO.PERSON.LASTNAME", rowKey,
    lastName.getText());
    personDataProvider.setValue(
    "DBO.PERSON.DEPTID", rowKey,
    department.getSelected());
    personDataProvider.setValue(
    "DBO.PERSON.LOCATIONID", rowKey,
    location.getSelected());
    personDataProvider.setValue(
    "DBO.PERSON.BEGINDATE", rowKey,
    newDate.getText());
    //personDataProvider.setValue(
    "DBO.PERSONDEVICE.AQUIREDATE", rowKey,
    newDate.getText());
    personDataProvider.commitChanges();
    info("New User " + newUser.getText() +
    " added to USER table");
    newUser.setText(null);
    } catch (Exception e) {
    log("Cannot add new User ", e);
    error("Cannot add new User: " +
    e.getMessage());
    } else {
    log("Cannot append new User");
    error("Cannot append new User");
    return null;
    }

    Sun's databound components tutorial may prove helpful to you.

  • I have 3 drop down boxes in my report done SQL SSRS .. I want t to put them in the same row (just one row) ..how can I do it.?

    I have 3 drop down boxes in my report done SQL SSRS .. I want t to put them in the same row (just one row) ..how can I do it.?

    Hi Sashi123,
    Just as Ivan said, we do not have the ability to change the Report Manager in this way. Because we can’t change the parameters locations as this is not supported to write expressions for the location of parameters.
    While we can build a custom application in Visual Studio that we can get it through codes after deploying the report, then through URL we can get it by customization.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • HT4864 The Outgoing Mail Server drop down box in mail setup keeps reverting back to 'None' - anyone have any ideas why?

    Hi
    I've been having difficulties with mail on my Mac and have checked all the settings.  I have three mail accounts, 2 iClouds (different acct names) and 1 bigpond account. 
    Whenever I change the outgoing mail server drop down boxes for the iCloud accts and save my changes, I go out of it then when I go back to the iCloud accts the drop down boxes for both iCloud accounts have reverted back to 'None'. 
    Is this of any relevance?  Is it 'normal'? 
    I've tried deleting all mail accounts and adding them all again but the same thing still happens. 
    I have been on Apple Support and followed the Mail Acct setup tutorial.
    I'd appreciate any help on this matter thanks.

    Thanks for your reply Winston Churchill.
    Because I'd been having problems which had recently been resolved by AppleCare Support I decided to go through all my accounts and check their individual settings.  I found a Tutorial on Apple support for setting up or verifying email account settings and found mine were different so I changed it.
    In any event I took your advice and just went with the option of automatically setting the iCloud accounts up and I haven't had anymore problems thus far - fingers crossed.
    I do however note that my drop down box in account settings still says 'none' for the outgoing mail server and the 'use this server only' check box isn't ticked despite being ticked in the 'verify account' info on the tutorial, so hence my question to the community - did this matter and what was the difference?
    I will let sleeping dogs lie I think and will see how I go.
    Many thanks for your help.

  • The 'Third Party Connections' drop down box on the 'Source Database' step in the Migration Wizard is empty.

    Here are the environmental details:  
    SQLDeveloper 32-bit Version 3.2.20.09 (Build MAIN-09.87)
    Oracle Database:  12C single instance (no RAC)
    Oracle client:  12C 32 bit
    Windows 64 bit desktop
    I am attempting to migrate an MS Access application to Oracle.  I pick the ‘Migrate’ selection from the ‘Tools’ Menu SQL Developer.  This puts me into the Migration Wizard.  When I get to the ‘Source Database’ step of the migration wizard, the ‘Choose the Third Party database from which you are migrating’  drop-down box is not being populated with the current available connections. It is empty.  If I type a valid connection name into the box, SQL Developer takes it on this screen but does not keep it for the next screen/step.  It has no persistence.  I even tried to make sure that each connection was open/connected before beginning the migration process.
    Due to the fact that I am attempting to migrate an MSAccess application, I am mixing 32-bit and 64 bit software.  This may be the issue as to why the drop down is losing addressability.  I have not applied any patches to this version of SQL Developer.

    Hi,
    If you need easy way to migrate Microsoft Access to Oracle probably it is more reasonable to review some tools specially designed to this purpose. For example:
    Access to Oracle converter by Intelligent Converters
    Access to Oracle converter by SpectralCore
    Access to Oracle converter by Interface Computers
    Hope, this will help.
    Sincerely,
    Vlad

  • Why can't the Accordian widget's drop down box span full width in mobile layout?

    I'm trying to create a simple drop down navigation for mobile. When the entire header is clicked, it expands down to reveal a dynamic vertical menu, which will cover the page content below, not push it down.
    I've taken an accordian widget and added a vertical navigation widget (to allow dynamic navigation) into the expanded area. When I preview it, the drop down box of the accordian widget doesn't span the full width of the site width (380px). It stops 5-10px short of the right edge, which is a small detail, but it annoys me, and is not how I have it set up in design view. There is no other content on the page, just this element. When I have elements extend off the page area, it somehow affects the amount of space the drop down area stops short from and adds more. Strange again. Kind of stumped as to if/how I can fix this.
    Screenshot attached.

    The code taht you have shown is not the template, it is a document that has been created from a template and renamed with a dwt extension.
    If you load the document into DW then go to menu item Modify->Templates->Detach from Template and save the file, you will have your original template called index.dwt and located in the Templates subdirectory.

  • How to handle Drop Down Box on Interactive Adobe Form

    Hi,
    On my adobe form there are some drop down boxes like company code, cost centre etc, actually i need F4 help on those fields,  but what i found is it's not possible to have F4 help on adobe form so i have choosen alternative as webdynpro acitvex drop down box in library. I have written a web dynpro application to fetch the data and display it on adobe interactive form, i could able to display the data for all the fields on adobe form except these drop down boxes, can any body suggest me how to handle these drop down boxes in webdynpro application. Your help will be greatly appreciated.
    Thansk & Regards,
    Venkat

    Hi Venkat,
    As you are using the WDP ActiveX dropdown in your form, it is fine but to populate values in the DD, you need to bind the context attribute with a simpletype and then populate the values. Use the below code to obtain a ModifiableSimple Type:
    IWDAttributeInfo abcInfo = wdContext.nodeABC().getNodeInfo().getAttribute("AttributeName");
                        ISimpleTypeModifiable def = abcInfo.getModifiableSimpleType();
                        IModifiableSimpleValueSet abcValueSet = def.getSVServices().getModifiableSimpleValueSet();
    and after this put te values in the obtained modifieable simple type like below:
    abcValueSet.put(key,value);
    where key may be the ID and value may be the name to be displayed in DD.
    Reward points if found helpful.
    Regards,
    Arafat

  • Poor performance when using drop down box on web report

    We are using dropdown box functionality in web reporting to allow easy selection of characteristics values. We have 4 dropdown boxes
    that represents Region, Area, Country and division.
    We need to use booked_values = 'Q' to show only relevant values for selection in the dropdown. However the issue is takes a long time for results to appear
    on the template. Read from Fact table is quick but process of deriving drop down values is very slow.
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="DROPDOWNBOX_1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
             <param name="BORDER_STYLE" value="BORDER"/>
             <param name="GENERATE_CAPTION" value=""/>
             <param name="IOBJNM" value="ZPC_ORG14"/>
             <param name="BOOKED_VALUES" value="Q"/>
             <param name="TARGET_DATA_PROVIDER_1" value="DATAPROVIDER_1"/>
             ITEM:            DROPDOWNBOX_1
    </object>
    Do you have any suggestions on how to improve performance on drop down?
    Thanks, Jay

    Dear Jayant Dixit,
    1) If the values in the drop down box....are NOT dependent on user selection...then webserver can send them along with the first page....and cache them on client m/c...for multiple client/server dialogs....
    2) If the values are changing based on what the user selected from a previous input......then...you need to do some research on how SAP Webserver could optimize the "network traffic"......For example: a) Apache webserver has a module that compresses the content on the webserver side and then send to the client...b)A Client browser plugin decompresses the received packet and displays appropriately....
    3) We may need to research the latest SAP webserver capabilities....
    Good luck, BB

  • Drop down box in interactive form UI element in webdynpro

    Hello All,
    I want to get a drop down list in adobe interactive form. I did the following.
    1. created a simple dictionary data type and populated it with values
    2. created a context and bound it to the simple dictionary type.
    3. when I drag the element to the pdf page, it shows it as a drop down list.
    4. when I run the application also, the drop down list comes but the values are not populated. I am not able to use the dropdown also.
    What should I be doing now to get a dropdownlist that works?
    Regards,
    Chander

    Hello Chander,
    what you want to create is a drop down list populated by the Web Dynpro context values. When you use drag-and-drop it just creates a regular drop down list (where you need to specify the values in the Designer).
    However if you select in your tools palette the Web Dynpro tab you will find special drop down lists. So here is what you do:
    1. Drag and drop a Value Help Drop-down List element from the Web Dynpro Library tab to the Body Pages pane.
    2. Drag and drop your node from the Data View tab onto it. This action binds the layout element to the corresponding node.
    Cheers
    Matthias

  • Set the default in a drop down box using BHTML

    Hi,
    I've got the following code in my html template:
    `repeat with i from 1 to g_curr_name.DIM`
    <option value="`g_curr_code<i>`">`g_curr_name<i>`</option>
    `end`
    This works fine, it displays all the values I've set from my program.  But I want to default the selected value to be USD.  Currently the list is sorted alphabetically so USD is somewhere in the middle.
    What's the correct code to check if the code is USD and then make that the selected one?  Maybe something like this:
    `repeat with i from 1 to g_curr_name.DIM`
    `if ( g_curr_code = "USD" )`
    <option selected value="`g_curr_code<i>`">`g_curr_name<i>`</option>
    `else`
    <option value="`g_curr_code<i>`">`g_curr_name<i>`</option>
    `end`
    `end`
    This code doesn't work and I've tried a few other ways but nothing works.  I don't know HTML so I might be making a basic error.
    Thanks for your help.
    Gill

    Hi,
    Use ingle quotes for USD like 'USD'.
    it will work.
    regards
    Satya

  • How to set default value for drop down box in jsf

    Hi,
    Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ?
    As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>.
    Any help must be appreciated.
    Regards,
    AK

    Hi Frank
    My entity type is a List in managed bean. I have set the entityType in the constructor of the managed bean. I have attached my code here.
    TPSearchCriteriaBean.java****************************************
    /** Constructor */
    public TPSearchCriteriaBean() {
    super();
    entityType=new ArrayList<String>();
    entityType.add(UIConstants.LIST_ITEM_ALL);
    authorizationType=new ArrayList<String>();
    authorizationType.add(UIConstants.LIST_ITEM_ALL);
    companyType=new ArrayList<String>();
    companyType.add(UIConstants.LIST_ITEM_ALL);
    mrgStatus=new ArrayList<String>();
    mrgStatus.add(UIConstants.LIST_ITEM_ALL);
    legalStatus=new ArrayList<String>();
    setEntityType(entityType);
    setAuthorizationType(authorizationType);
    setCompanyType(companyType);
    setMrgStatus(mrgStatus);
    country = "0";
    //address = new AddressBean();
    UIConstants.java***********************************************************
    public static final String LIST_ITEM_DEFAULT = "select";
    public static final String LIST_ITEM_ALL = "0";
    LOVManager.java*****************************************************************
    public List<SelectItem> getLovList(String lovType, boolean requiredOption_SELECT, boolean requiredOption_ALL)
    log.debug("LOV loading for " + lovType + ": START");
    List<SelectItem> lovList = new ArrayList<SelectItem>();
    //check validity of lov loading request
    validLov:
    for (int i = 0; i < lovTypeArray.length; i++)
    if (lovTypeArray.equals(lovType))
    break validLov;
    log.debug("ERROR: LOV Type not valid.");
    return lovList;
    //First select is replaced by ALL here
    //<-- Select --> should be an option
    if (requiredOption_SELECT)
    lovList.add(new SelectItem(UIConstants.LIST_ITEM_DEFAULT, "--Select--"));
    LOVDao dao = new LOVDao();
    dao.loadLOVValues(lovType, lovList);
    log.debug("LOV Loading successful!");
    //<ALL> should be an option
    if (requiredOption_ALL)
    lovList.add(new SelectItem( UIConstants.LIST_ITEM_ALL, "ALL"));
    return lovList;
    Kindly help me.
    Regards,
    AK

  • From database to drop down box

    Hi all,
    Suppose I have the following
    String query ="Select name, number from Person";
    I want to put all the "names" in a drop down box and all the "numbers" in a separate drop down box. When I do this:
    while(rs.next()){
    <select="person" onchange="showSelection">
    <option value="<%=rs.getString("name")%>"><%=rs.getString("name")%></option></select>
    I only get the value of the first name in my table. Can anyone help me?

    Hi
    I think you need to do some order. my suggestion is to create an Object that contains name and number like this:public class MyClass {
         String name;
         int number;
         public MyClass(String n,int num){
              setName(n);
              setNumber(num);
         //set and get methods for the data members...
    }next, roll over the ResultSet and create MyClass object each time and add it to a Vector or something like that. usually a drop down box displays many times and it will be very bad if you will query the data base each time you want to display it, thats why i suggest you to save this Vector in a bean or somewhere else (of course, if the data is static).
    than display the vector content like this:<select name="person" onchange="showSelection">
    <%     Enumeration e=vec.elements();
         while(e.hasMoreElements()){
              MyClass m=(MyClass)e.nextElement();
    %>          <option value="<%=m.getName();%>"><%=m.getName();%></option>
    <%     }%>
    </select>
    <%     e=vec.elements();
    %><select name="number" onchange="showSelection">
    <%     while(vec.hasNext()){
              MyClass m=(MyClass)vec.next();
    %>          <option value="<%=m.getNumber();%>"><%=m.getNumber();%></option>
    <%     }%>
    </select>pay attention on how you wrote the select tag: <select="person"...
    and not: <select name="person"...
    hope it helps
    mamtz
    BTW
    think of using struts and custom tags in jsp it will much easier to do this!!!

  • Email submit button using drop down boxes, cc field and

    I have a form that I would like to have the employees use a drop down box that already exists on the form with names and email addresses and use those names in the to field of an email submit button.  Also, I do have a static cc: address in teh cc field and for the subject of the email to use  an existing field such as the name field as the subject of the email and attach the form to it.

    I tried that but it  does not seem to be working.  I am a JavaScript Novice.  I am trying  to use the mailto field based on email addresses in a dropdown box, a static cc field like cc: [email protected] and for the subject to be based on the company name field on the form.  But before all of that I want to make sure all the required fields are filled out.  help I have been working on this for over a year.  It may seem simple but it's not working.

Maybe you are looking for