Limitation on file VIEW

I've encountered what appears to be a file size limitation when using the VIEW link and am wondering if anyone knows if there is some configuration change that can overcome the problem. I have a Powerpoint .ppt file that is almost 30MB. The file uploads to Teaming fine, and can be edited and saved back fine. However, when using "VIEW", a browser window opens and after some delay, the following shows up: "HTML Conversion Error" and "Error: Html conversion failed for file.ppt: (2050) The export process timed out." If I cut the file down in size, it works fine. Is there any configuration to adjust the timeout period?

By default, the Stellent converters are given 30 seconds for any single
conversion. The conversion of your document is taking longer than that.
You can bump this limit using a setting in your ssf*.properties files.
In the ssf.properties file, find the line:
conversion.timeout.ms=30000
Copy that to your ssf-ext.properties file and bump that 30000 to
something larger. That will give the converters more time to perform
these conversions.
MacWiz.
On 11/30/10 7:36 AM, dangross wrote:
>
> I've encountered what appears to be a file size limitation when using
> the VIEW link and am wondering if anyone knows if there is some
> configuration change that can overcome the problem. I have a Powerpoint
> .ppt file that is almost 30MB. The file uploads to Teaming fine, and
> can be edited and saved back fine. However, when using "VIEW", a
> browser window opens and after some delay, the following shows up: "HTML
> Conversion Error" and "Error: Html conversion failed for file.ppt:
> (2050) The export process timed out." If I cut the file down in size,
> it works fine. Is there any configuration to adjust the timeout period?
>
>

Similar Messages

  • DW CS5 "Get" bug in expanded site files view

    Hi,
    I just installed the CS5 Design Premium trial and have been playing with Dreamweaver. Just wondering if anyone else is experiencing the following issue...
    When in expanded site files view (showing both local and remote), selecting a file on the REMOTE site and trying to "Get" the file does not download the remote file. It instead tries to retrieve the remote copy of the file(s) selected in the LOCAL file list pane.
    If no file is selected on the local file list, pressing "Get" after selecting a REMOTE file from the list brings up the "Are you sure you wish to get the entire site" dialog.
    Steps to reproduce:
    1. Open expanded site files view (local and remote)
    2. Click on a file in the remote file list. For testing purposes, click on a file in the LOCAL list first, then select a remote file
    3. Click the Get button or right click on the remote file and choose Get.
    DW should download the selected REMOTE file if that was the last selected file prior to executing the Get command. (this is the action that DW CS3/CS4 does)
    I have submitted this bug in the official Adobe bug reporting system, but I'm curious as to whether others can reproduce this bug.
    Thanks

    @Murray, I think I have discovered exactly where the bug lies and how you may be able to reproduce it yourself...
    @quantumlight - do you happen to have your Site Files panel UNDOCKED and in its own floating panel??
    I work with Dreamweaver on a dual/multi monitor setup. I have my split design/code view on one screen, and the site files and code inspector on a DETACHED Files panel on the 2nd monitor.
    I did a full DW prefences reset and everything went back to the factory setting, with the Files panel docked to the right hand side of the DW program window. With it docked, I opened the expanded/split site files view and IT WORKED NORMALLY as is expected.
    However, as soon as I UNDOCKED the Files panel into its own floating panel and expanded the file view, the bug appeared and selecting a REMOTE FILE and pressing Get, asked to either download a copy of the selected LOCAL file, or if no local file is selected it asks "Are you sure you want to get the entire site"
    Redocking the Files panel back to its original position makes the bug disappear.
    I have tested this on two Windows 7 machines and one Mac Snow Leopard machine, both with the CS5 11.0.2 updates installed.
    It seems it's a Windows version only bug as both Win7 machines produced the bug, with the Mac machine NOT presenting the bug in either docked or floating panel state.
    Hopefully the Adobe DW guys see this soon and can work on fixing this bug in the next update.
    Do you think i should re-submit my previous bug report with this updated discovery?

  • How do I select more then one channel to view in tdms file viewer graph panel

    I have a TDMS file that I can view with the labview 2013 TDMS file viewer and I can select one signal out of 15 signals to view on the graph panel. however I would like be able to look at 2 or 3 signals
    on the same graph but can't seem to be able to select more then one signal at a time. Is there a way to select more then one to view?  

    I've modified the TDMS viewer in the past to allow selecting multple channels.  It's a little bit of a pain because the tree control in the viewer only allows you to select one item.  You have to edit the tree to allow multiple items.  Now your selection is an array instead of a scalar.  This means the rest of the code has to be updated, and the references to the tree in subVIs need to be updated.  Not impossible but it takes some time.  Alternativly open it in Excel with the free add-in then you can select the two columns you want and insert a graph.  Not as simple for the user but using Excel, which users should be familiar with might mean users need less training on data files.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

    Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

  • Gnome 3 log file viewer crashes on file open

    Hi everyone,
        I'm experiencing an annoying issue in which the system log file viewer crashes when I load certain log files.  For example, if I go to file>open>crond.log, the viewer will crash. The same occurs with errors.log, kernel.log, pm-suspend.log, and others on a somewhat inconsistent basis.   When I relaunch the program, crond.log (or any of the other files in question) is open and can be viewed without a problem. 
    After I initially set up the system, I ran into permissions problems when trying to open a number of log files.  I added my user to the "log" group and then had to manually chmod the /var/log/ directory to resolve those issues.   The crash seems to occur on the log files that were originally restricted.  It does appear that some of the log files are still in the "root" group as opposed to the "log" group.
    I'm running Arch 64-bit with Gnome 3.0 (native install, not upgrade).   Has anyone else experienced this problem?  I'm somewhat of a novice with permissions so perhaps that's to blame. Still, it doesn't seem like the viewer should crash but then be able to open the file.
    Output of ls -l /var/log:
    total 34244
    -rw-r----- 1 root log 12691 May 15 20:44 auth.log
    -rw-r----- 1 root log 15189 May 15 10:31 auth.log.1
    -rw-r----- 1 root log 44949 May 8 09:01 auth.log.2
    -rw-r----- 1 root log 70857 May 6 18:01 auth.log.3
    -rw-r--r-- 1 root root 11577 May 15 20:44 boot
    -rw------- 1 root root 0 Apr 22 21:09 btmp
    drwxr-x--- 2 root root 4096 May 15 14:50 ConsoleKit
    -rw-r----- 1 root log 362 May 15 15:01 crond.log
    -rw-r----- 1 root log 1796 May 15 14:50 crond.log.1
    -rw-r----- 1 root log 1440 May 8 09:32 crond.log.2
    -rw-r----- 1 root log 4441 May 6 18:10 crond.log.3
    drwxr-xr-x 2 root root 4096 May 15 14:50 cups
    -rw-r----- 1 root log 44287 May 15 20:44 daemon.log
    -rw-r----- 1 root log 96821 May 15 14:41 daemon.log.1
    -rw-r----- 1 root log 128416 May 8 08:27 daemon.log.2
    -rw-r----- 1 root log 445951 May 6 17:14 daemon.log.3
    -rw-r--r-- 1 root root 48494 May 15 20:44 dmesg.log
    -rw-r----- 1 root log 6334 May 15 20:57 errors.log
    -rw-r----- 1 root log 10912 May 15 10:30 errors.log.1
    -rw-r----- 1 root log 4098198 May 7 18:36 errors.log.2
    -rw-r----- 1 root log 28279 May 6 17:23 errors.log.3
    -rw-r----- 1 root log 292780 May 15 20:57 everything.log
    -rw-r----- 1 root log 352142 May 15 14:50 everything.log.1
    -rw-r----- 1 root log 8504549 May 8 09:32 everything.log.2
    -rw-r----- 1 root log 2329358 May 6 18:10 everything.log.3
    -rw------- 1 root root 32064 May 8 08:28 faillog
    drwxrwx--T 2 root gdm 4096 May 15 20:44 gdm
    -rw-r----- 1 root log 237511 May 15 20:45 kernel.log
    -rw-r----- 1 root log 244356 May 15 14:41 kernel.log.1
    -rw-r----- 1 root log 8366407 May 8 08:09 kernel.log.2
    -rw-r----- 1 root log 1781951 May 6 17:23 kernel.log.3
    -rw-r--r-- 1 root root 292584 May 8 08:28 lastlog
    -rw-r----- 1 root log 195079 May 15 20:57 messages.log
    -rw-r----- 1 root log 247865 May 15 14:41 messages.log.1
    -rw-r----- 1 root log 4231866 May 8 09:29 messages.log.2
    -rw-r----- 1 root log 1620382 May 6 17:54 messages.log.3
    -rw-r--r-- 1 root root 12448 May 15 20:45 ntp.log
    drwxr-x--- 2 root root 4096 Apr 8 06:08 old
    -rw-r--r-- 1 root root 0 May 13 23:47 PackageKit
    -rw-r--r-- 1 root root 113304 May 15 17:09 pacman.log
    -rw-r--r-- 1 root root 203599 May 15 20:44 pm-powersave.log
    -rw-r--r-- 1 root root 289619 May 15 20:36 pm-suspend.log
    -rw-r----- 1 root log 701 May 15 20:44 syslog.log
    -rw-r----- 1 root log 619 May 15 10:00 syslog.log.1
    -rw-r----- 1 root log 1387 May 7 18:18 syslog.log.2
    -rw-r----- 1 root log 5309 May 6 17:14 syslog.log.3
    -rw-r----- 1 root log 9697 May 15 20:57 user.log
    -rw-r----- 1 root log 7773 May 15 10:31 user.log.1
    -rw-r----- 1 root log 6344 May 8 08:27 user.log.2
    -rw-r----- 1 root log 90189 May 6 17:14 user.log.3
    -rw-r----- 1 root log 0 May 15 14:50 uucp.log
    -rw-r----- 1 root log 0 May 8 09:32 uucp.log.1
    -rw-r----- 1 root log 0 May 6 18:10 uucp.log.2
    -rw-r----- 1 root log 0 Apr 25 01:11 uucp.log.3
    -rw-rw-r-- 1 root root 167424 May 15 20:57 wtmp
    -rw-r--r-- 1 root root 348288 May 6 17:14 wtmp.1
    -rw-r--r-- 1 root root 38995 May 15 20:44 Xorg.0.log
    -rw-r--r-- 1 root root 40721 May 15 20:36 Xorg.0.log.old

    w201 wrote:Dconf editor has completly vanished from my activities overview, well at least the GUI frontend, pacman shows that it's installed. Another function that seems to be gone in 3.16 is the ability to search for files from the activities overview!! I really hope that gets fixed soon :-(
    reinstalling dconf-editor fixed that issue for me

  • I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description fie

    I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

    I'm currently using Adobe Acrobat X to create PDF portfolios for client deliverables. Within the portfolio, there is a "Files" view which can be seen below. I'm interested in knowing if it's possible to bulk import metadata into either the Description field or any user created field via a CSV, spreadsheet, etc. Thanks for any insight which can be given.

  • FR 9.0.5.2: Add node context menu to "uncommitted files" view

    Hi, the "uncommitted files" view is really cool.
    Would be great if you could add the file type specific context menu.
    This would allow me to run Jalopy, PMD, ALT-POS1 or another tool directly in the view without having to open the file in the editor.
    Perhaps with multiple selection?
    Additionally having "organize imports" would be helpful, too.
    Thanks, Markus

    Filed enhancement request# 3834665.

  • Limitations of File Content Conversion (FCC)

    Hi
    I want to know the Limitations of File Content Conversion (FCC) while defining for a particular structure.
    I was bit confused from the [SAP Help |http://help.sap.com/saphelp_nw2004s/helpdata/EN/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm]
    It says "There can be a fixed or variable number of substructures in a recordset." but from sdn i found
    [Content Conversion in File Adapter   |Content Conversion in File Adapter]
    It will support "A maximum of 3 hierarchy level will be supported in FCC"
    Is <recordset> Mandatetory in for FCC, what if we dont have <recordset> in the structure.
    Till what hierarchy level it supports
    what is the limitation of FCC
    Regards,
    Varun
    Edited by: Varun Reddy on Feb 26, 2009 4:52 PM

    Varun,
    Both statements are true:
    Consider, for instance, a file containing orders. You could have:
    HEADER;123;456;11112 (containing sender 123, receiver 456, order number 11112)
    PARTNER;OR;234 (containing the ordering partner number 234)
    PARTNER;DL;235 (containing the delivery address 235)
    DATE;OR;20090226 (containing the order date 26/02/2009)
    DATE;DL;20090228 (containing the delivery date 28/02/2009)
    LINE;9998;12 (article number 9998, quantity 12)
    LINE;9996;25 (article number 9996, quantity 25)
    LINE;9991;3 (article number 9991, quantity 3)
    HEADER;123;456;11113 (2nd order containing sender 123, receiver 456, order number 11113)
    PARTNER;OR;234 (containing the ordering partner number 234)
    PARTNER;DL;237 (containing the delivery address 237)
    DATE;OR;20090226 (containing the order date 26/02/2009)
    DATE;DL;20090301 (containing the delivery date 01/03/2009)
    LINE;9998;4 (article number 9998, quantity 4)
    Parsing such a file with FCC would be possible, provided there's an identifier that indicates the type of line (like 'HEADER', 'PARTNER', etc). This is an example of There can be a variable number of substructures in a recordset.
    If the records do not contain an identifier from which you can see the line type, FCC can only parse this if the order of the various structure types is fixed, so that it can determine from the line number what type of record this is. This would be an example of There can be a fixed number of substructures in a recordset.
    Now, about A maximum of 3 hierachy level will be supported in FCC. In the FCC, there are three levels: the recordset (one order in the above example), the record (a line in the file) and the field (the order number, for instance). The FCC does not support files with deeper nesting. For instance, if a line item in your flat file could also contain a delivery date, FCC does not support this.
    Hope this helps,
    Koen

  • Files in "file view" but not in Explorer

    Hello all,
    I reorganized my Project repository on my harddisc. I created subfolders and moved some of my files into them. I used "Move on disc..." option in files view in the project explorer. In windowws explorer all looks fine now.
    But in files view I have a total of 5 files and 1 directory which are now duplicate in the project but in diffrent folders. This leeds to confilcts in the project because LV doesn't know which file version to use, although there is only one version on harddisc.
    I hope the picture brings some light in my issue. (BTW: I use LV 8.5.1 on WinXP SP2)
    Does anyone have an explanation?
    I will try to resolve the conflicts manually, I think this will work. But still this behavior is strange to me.
    Uli
    Message Edited by UliB on 07-18-2008 09:18 AM
    Attachments:
    filesview-explorer.png ‏61 KB

    Somewhere in the VI/controls that are located in the right spot, their is a reference to the old path location.
    You could locate these by selecting the missing file, switch to project view (ctrl-e) and find use right-click, find callers.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • RAISEERROR not shown in Agent Job Log File Viewer

    I use a RAISEERROR for a critical error in a CATCH. When the Job is run, it does fail but it gives the following message. How do i get my @Note to show in the Log File Viewer? Also, where is the log referenced 'WITH LOG'. I looked at the SQL Server Agent
    Log and did not see anything.
    Message
    Executed as user: NT AUTHORITY\SYSTEM. TCP Provider: The specified network name is no longer available. [SQLSTATE 08S01] (Error 64)  Communication link failure [SQLSTATE 08S01] (Error 64).  The step failed.
    DECLARE @Note VARCHAR(500) = 'RAISEERROR due to Critical error'
    RAISERROR (@Note, 20, 127) WITH LOG

    It says Target Local Server. I scripted out the job and proc and ran them on another SQL Server 2008 R2 and I got the expected results. Maybe the test SQL Server 2008 R2 environment I am using has some quirks (for lack of a more technical term)
    @VERSION on SQL Server where I get the  [SQLSTATE 08S01] (Error 64)
    Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86)   Apr  2 2010 15:53:02   Copyright (c) Microsoft Corporation  Standard Edition on Windows NT 5.2 <X86> (Build 3790: Service Pack 2) (Hypervisor)
    @VERSION on SQL Server where I get expected results
    Microsoft SQL Server 2008 R2 (RTM) - 10.50.1600.1 (Intel X86)   Apr  2 2010 15:53:02   Copyright (c) Microsoft Corporation  Developer Edition on Windows NT 6.0 <X86> (Build 6002: Service Pack 2) (Hypervisor)
    BELOW are the scripted out job and proc that I have been using to test the RAISERROR 
    -- scripted out job
    USE [msdb]
    GO
    /****** Object: Job [AATEST] Script Date: 12/15/2013 16:15:09 ******/
    IF EXISTS (SELECT job_id FROM msdb.dbo.sysjobs_view WHERE name = N'AATEST')
    EXEC msdb.dbo.sp_delete_job @job_id=N'2dd36995-fde6-491c-b4e2-85e8bdea6411', @delete_unused_schedule=1
    GO
    USE [msdb]
    GO
    /****** Object: Job [AATEST] Script Date: 12/15/2013 16:15:09 ******/
    BEGIN TRANSACTION
    DECLARE @ReturnCode INT
    SELECT @ReturnCode = 0
    /****** Object: JobCategory [[Uncategorized (Local)]]] Script Date: 12/15/2013 16:15:09 ******/
    IF NOT EXISTS (SELECT name FROM msdb.dbo.syscategories WHERE name=N'[Uncategorized (Local)]' AND category_class=1)
    BEGIN
    EXEC @ReturnCode = msdb.dbo.sp_add_category @class=N'JOB', @type=N'LOCAL', @name=N'[Uncategorized (Local)]'
    IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
    END
    DECLARE @jobId BINARY(16)
    EXEC @ReturnCode = msdb.dbo.sp_add_job @job_name=N'AATEST',
    @enabled=1,
    @notify_level_eventlog=0,
    @notify_level_email=0,
    @notify_level_netsend=0,
    @notify_level_page=0,
    @delete_level=0,
    @description=N'No description available.',
    @category_name=N'[Uncategorized (Local)]',
    @owner_login_name=N'FNXXX\eME', @job_id = @jobId OUTPUT
    IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
    /****** Object: Step [STEP1] Script Date: 12/15/2013 16:15:09 ******/
    EXEC @ReturnCode = msdb.dbo.sp_add_jobstep @job_id=@jobId, @step_name=N'STEP1',
    @step_id=1,
    @cmdexec_success_code=0,
    @on_success_action=1,
    @on_success_step_id=0,
    @on_fail_action=2,
    @on_fail_step_id=0,
    @retry_attempts=0,
    @retry_interval=0,
    @os_run_priority=0, @subsystem=N'TSQL',
    @command=N'EXEC aap1test',
    @database_name=N'Store01',
    @flags=0
    IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
    EXEC @ReturnCode = msdb.dbo.sp_update_job @job_id = @jobId, @start_step_id = 1
    IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
    EXEC @ReturnCode = msdb.dbo.sp_add_jobserver @job_id = @jobId, @server_name = N'(local)'
    IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
    COMMIT TRANSACTION
    GOTO EndSave
    QuitWithRollback:
    IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION
    EndSave:
    GO
    -- scripted out proc
    USE [Store01]
    GO
    /****** Object: StoredProcedure [dbo].[aap1test] Script Date: 12/15/2013 16:17:19 ******/
    IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[aap1test]') AND type in (N'P', N'PC'))
    DROP PROCEDURE [dbo].[aap1test]
    GO
    USE [Store01]
    GO
    /****** Object: StoredProcedure [dbo].[aap1test] Script Date: 12/15/2013 16:17:19 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE PROCEDURE [dbo].[aap1test]
    AS
    BEGIN
    RAISERROR ('************ i am here', 20, 127) WITH LOG -- bxg
    END
    GO

  • TDMS File Viewer not working in LabVIEW2009

    Anyone know how to get this to work in 2009. I believe this came from the forums and quit working when I upgrade to 2009.
    Solved!
    Go to Solution.
    Attachments:
    TDMS - File Viewer.vi ‏63 KB

    Hi bassinbc
    The TDMS file Viewer ia a VI that comes with LV. I just tested it in LV2009 and it worked fine. Have you tried removing it and replacing it from the palette?
    Best Regards
    David
    NISW
    Message Edited by Davidek on 08-18-2009 09:40 AM

  • Add new menu item like File, View... to photoshop

    Hi,
    I want to add new custom menu in photoshop menu bar, like FIle view etc....
    And also need a popup menu which will open on clicking of this menu.
    Please tell me how to acheive this........

    Thanks for your reply Chris. Do you suggest any alternative to implement a file checkout/checkin
    inside photoshop?
    Any way to display these options inside it?
    Thanks,
    David

  • Limiting the file size on Export Action

    Hi,
    Is there an easy way of limiting the file sizes created by the Export action by simpoly stating the limit, for example 5MB?
    Thanks,
    Ronen

    But you can proxy it by knowing that, say, a JPEG at 3000 x 3000 at 90% quality will be about 5 Gigs. - example, figures not meant to be accurate. Or a Tiff at 1000 X will be.....

  • Illustrator files view as black and white

    I am running OSX 10.6.8 and CS6, and in the past couple weeks I noticed that my files now view in folders as black and white instead of in full color.  I save AI files as PDF and select "Convert to Destination" and the file views as it should.  Has anyone else had this issue????

    Thanks, that set me on the right track. Greatly appreciated/

  • Problem with installing Canon File Viewer Utility Updater 1.3.2

    I'm trying to install the Canon File Viewer Utility Updater 1.3.2, which is downloaded from Canon's site, the file named FVXUPD_01030209U02E.sit
    The installer automatically quited right after I hit the "OK" button on the license information window. The background window show a message "int err". I called Canon support, they said they can install the updater fine. So, they have no idea.
    Anyone can help me on how I can install the updater without it force quit by itself? Thank you in advanced!

    Do you have version 1.2 or 1.2.1 installed as the older version? If you scroll down on the Canon download page there's a section called "When unable to install the Updater by the procedures above". If you haven't tried that yet, try updating to 1.2.1 first, then 1.3.2.
    For what it's worth, I was able to install the update on my PowerBook running Tiger. But other than the Adobe Illustrator 11.0 -> 11.0.1 "no-installer update" from a year or so ago, this Canon updater has to be the worst I've ever seen.
    charlie

Maybe you are looking for

  • Itunes won't work on windows 7 64 bit computer don't know what else to do

    i have an HP G60-530US notebook with windows7 64 bit operating system. i downloaded the proper version of itunes from the apple site but when i open the program on my computer itunes doesn't respond. i cannot do anything with it. i've tried reinstall

  • Video Recording.

    Hi all, I am programming a part of recording video from the integrated camera. The following is the code: try { Player p = Manager.createPlayer("capture://video"); p.realize(); RecordControl rc = (RecordControl)p.getControl("RecordControl"); ByteArra

  • Is Spry still being developed?

    Hi! I was just wondering if development is still continuting on Spry. I like Spry a lot, so it would be saddening if Spry is a "dead fish in the water".

  • Append 'RH_STRUC_GET' FM result

    Does anyone knows, how to append 2 result from the FM 'RH_STRUC_GET' ?? Thanks for your help quentin

  • How to import iPhoto library?

    Sorry, it just took a while to work. Message was edited by: theskyisblue