Limitations in SAP MDM!!

Dear Experts,
Does anyone know about Limitations in SAP MDM!!
Could you please let me know in detail??
Kind Regards
Eva M

Hi Eva,
What type of limitations are you refering to.
One of the major limitations that we have faced in our implementation is if the file size is too big, may be cause of the number of records and the fields mapped out it gets very difficult to manually syndicate the file. If you have any other specific issues could help on that.
In addition some general issue are
Sharing of Lookup tables (e.g. country) across repositories not supported. Linking of objects residing in 2 repositories is not supported with SAP NetWeaverMDM 5.5, natively.Workarounds via the integration into SAP NetWeaver Portal
Use of u201Ceventing technologyu201D mapping of key fields and match of respective values Not sufficient for each and every use case
There is no Migration options. One needs to manually make the changes right from development through to the production environment.
there are lots of limitations on Qualified Lookups in MDM 5.5 and also in MDM 7.1....
1) Can't write Assignments...
2) Failed validation won't specify which qualified link has failed.
3) Compare records won't show link wise comparison of qualified links.
4) Can't start qualified link level workflows.
5) Role level constraints not applicable for Qualified lookup and tables referencing from QL directly or indirectly.
6) Qualified link level check-in check-out operations are not possible.
7) Qualified link level unique constraints are not possible (this becomes pain if links get duplicated by mistake)
8) Duplication of QL link is not allowed in data manager (for copying Qualifier values in new Qualified link).
9) Tuple is replacement for qualified lookup, but its more restrictive than QL (validation are not allowed on multivalued tuple).
One Major limitation that was there in 5.5 was we could only maintain a single Maintable. 7.1 solves that problem.
The following link gives some good examples:
http://www.it-director.com/technology/data_mgmt/content.php?cid=10837
Do let me know in case you need more help or if i was able to help answer your question

Similar Messages

SAP MDM Non SAP Systems

Hi Gurus,
I am new to MDM. Can you tell me how to link up SAP MDM and a Non SAP client. How does the data flow from the client to MDM.
Grateful for your help
Regards
Leo Gift

Hi Leo
If you are using a middleware to connect the source & destination, then the file formats supported by middleware will be the limiting factor for data communication. The data from source systems gets converted to the format supported by middeware & then output file from the middleware can be in one of the forms supported by import manager.
Similarly in syndication, the output can be xml or flat file formats.
Arvind
Pls reward useful answers

SAP MDM certification through SAP Tech Ed

Hi All,
I have lot of questions regarding SAP CERTIFICATION in SAP Tech Ed. Please response.
If I want to do SAP MDM certification through SAP Tech Ed then what are the things required?
1) I have worked on EP Webdynpro previously. But Now I am in a support project working in MDM and I have 1 year exp. in MDM but my knowledge is very limited and project specific.
So I want to know can I do MDM certification.
2) I have completed 1 year 3 months in current organization. So should I mention my previous experience of Webdynpro or only the relevant exp. of MDM?
3) If I will mention my SAP EP-Webdynpro exp should I get advantage or not?
4) If our management will provide any letter then what they should mention in that letter?
5) If I will not get no objection from my employer then can I do certification by my
own?
What are the fees of training + certification in Tech Ed?
Thanks
Shalini

Hello Shalini,
Refer these threads for more information about certification:
MDM Certification
MDM Certification Questions?
Hope this will surley help you.
Also refer the link mentioned below:
http://www.sap.com/services/education/catalog/netweaver/certificationtest.epx?context=FFC760B8923D16BB5150DAE63E7C1A6B331AF0B9E3A8F73CE3A9B7046E051044503600C911DBA13DCE978D3AC9057626D2B68111A7CD2D707E2EEC31213097E46EB790DD0106435EE0756F7B22F3FA4B4FF0645C06954BF3A150E023B4164DA282F33B1BD441FBE4083F2C923E33EA0C5960F8C8950FDEB6081ABED6E0E05E2617A693D85077260F9EA218716A79AEF3AA57C7D5E8975334%7C4BB8BC4A07D56CCC194DD5BFADD4D025
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7dc6ba86-0501-0010-0b82-849437929f0d
Might be helpful for you.
TNR,
Saurabh....

SAP MDM training

Hi ,
I have been working in SAP Netweaver XI for almost an year now and would want to learn /get trained and certified in SAP MDM
I have heard that SAP Labs and Siemens offer packaged training programs for SAP Modules and New dimension products which include certification
Can any one please help me out with the training schedules for SAP Education services / SAP labs and Siemens Information Systems Limited ??
it will be a great help
Please help me out in finding out the dates for the above mentioned
thanks
SD

Hi SD,
regarding the certification details, you can refer the following link:
http://www.sap.com/services/education/catalog/netweaver/certificationtest.epx?context=FFC760B8923D16BB5150DAE63E7C1A6B331AF0B9E3A8F73CE3A9B7046E051044503600C911DBA13DCE978D3AC9057626D2B68111A7CD2D707E2EEC31213097E46EB790DD0106435EE0756F7B22F3FA4B4FF0645C06954BF3A150E023B4164DA282F33B1BD441FBE4083F2C923E33EA0C5960F8C8950FDEB6081ABED6E0E05E2617A693D85077260F9EA218716A79AEF3AA57C7D5E8975334%7C4BB8BC4A07D56CCC194DD5BFADD4D025
And for the self learning purpose, you just refer the mentioned below link:
https://www.sdn.sap.com/irj/sdn/mdm-elearning
Hope this will help you.
TNR,
Saurabh...

SAP MDM, ORACLE MDM, Microsoft MDM and IBM MDM

Could someone discuss the differences and similarities between these MDMs-
SAP MDM, ORACLE MDM, Microsoft MDM and IBM MDM. Who is/will dominate the Market?
Thank you.
Priya.

Hi priya k ,
These r the details regarding MDMs-SAP MDM, ORACLE MDM, Microsoft MDM and IBM MDM.
SAP Master Data Management
SAP Master Data Management (SAP MDM) enables master data on customers, partners and products to be consolidated and harmonized across the enterprise, making it available to all staff and business partners. A key component of SAP NetWeaver, SAP MDM ensures data integrity across all IT systems.
The SAP NetWeaver Master Data Management (SAP NetWeaver MDM) component of SAP NetWeaver creates the preconditions for enterprise services and business process management. The functionality represents customers, products, employees, vendors, and user-defined data objects in unified form. With SAP NetWeaver MDM, customers can manage master data and supplemental content, such as texts, PDF documents, high-resolution images, or diagrams in a central business information warehouse.
SAP Master Data Management (SAP MDM) is a component of SAP's NetWeaver product group and is used as a platform to consolidate, cleanse and synchronise a single version of the truth for master data within a heterogeneous application landscape. It has the ability to distribute internally and externally to SAP and non-SAP applications. SAP MDM is a key enabler of SAP Enterprise Service-Oriented Architecture. Standard system architecture would consist of a single central MDM server connected to client systems through SAP Exchange Infrastructure using XML documents, although connectivity without SAP XI can also be achieved. There are five standard implementation scenarios:
Content Consolidation - centralised cleansing, de-duplication and consolidation, enabling key mapping and consolidated group reporting in SAP BI. No re-distribution of cleansed data.
Master Data Harmonisation - as for Content Consolidation, plus re-distribution of cleansed, consolidated master data.
Central Master Data Management - as for Master Data Harmonisation, but all master data is maintained in the central MDM system. No maintenance of master data occurs in the connected client systems.
Rich Product Content Management - Catalogue management and publishing. Uses elements of Content Consolidation to centrally store rich content (images, PDF files, video, sound etc.) together with standard content in order to produce product catalogues (web or print). Has standard adapters to export content to DTP packages.
Global Data Synchronization - provides consistent trade item information exchange with retailers through data hubs (e.g. 1SYNC) Some features (for example, workflow) require custom development out of the box to provide screens for end users to use.
History
SAP is currently on its second iteration of MDM software. Facing limited adoption of its initial release, SAP changed direction and in 2004 purchased a small vendor in the PIM space called A2i. This code has become the basis for the currently shipping SAP MDM 5.5, and as such, most analysts consider SAP MDM to be more of a PIM than a general MDM product at this time.
Getting Started with Master Data Management
/docs/DOC-8746#section2 [original link is broken]
Master Data Management (SAP MDM)
http://help.sap.com/saphelp_mdm300/helpdata/EN/2d/ca9b835855804d9446044fd06f4484/frameset.htm
http://www.sap.com/netherlands/platform/netweaver/components/mdm/index.epx
http://www11.sap.com/platform/netweaver/components/mdm/index.epx
Master Data Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/f062dd92-302d-2a10-fe81-ca1be331303c [original link is broken]
Master Data Operations
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/a0057714-302e-2a10-02ad-b56c95ec9376 [original link is broken]
Master Data Quality
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/c0a78be0-142e-2a10-f6b9-f67069b835da [original link is broken]
Oracle MDM
Oracle MDM is a core Fusion technology that will enable them to integrate their diverse portfolio of acquired solutions (PeopleSoft, JD Edwards, Siebel, etc.) and allow them to work together much more effectively.MDM is also a key component of Oracles middleware strategy to aggressively target heterogeneous environments solutions running on different databases, operating systems, and using different data warehouse or analytical solutions. Oracle is a leading provider of ERP and CRM applications, but more broadly they are a provider of core platform solutions that help pull together and harmonise all a companys IT assets.
Master Data Management solutions provide the ability to consolidate and federate master information from disparate systems and lines of business into one central data repository or hub. As part of its Master Data Management strategy, Oracle offers solutions that enable customers to synchronise critical information in a single, central location to achieve an accurate, 360-degree view of data, whether from packaged, legacy or custom applications. Oracle offers the following solutions:
Oracle Product Information Management Data Hub Enables companies to centralise, manage and synchronise all product information with heterogeneous systems and trading partners.
Oracle Customer Hub Centralises, de-duplicates and enriches customer data, continuously synchronising with other data sources across the enterprise, to provide a single, accurate, authoritative source of customer information throughout the enterprise.
Oracle Financial Consolidation Hub Allows companies to control the financial consolidation process by integrating and automating data synchronisation, currency translation, inter-company eliminations, acquisitions and disposals.
Clean, consolidated and accurate master data distributed throughout the enterprise can save companies millions of dollars annually. With Oracle, organisations are equipped to leverage the best data management practices available today to help dramatically increase operating efficiencies, improve customer loyalty and ensure corporate governance.
MDM solutions provide the ability to consolidate and federate disparate systems and lines of business into one central data repository. Acxiom is the world's largest processor of consumer data and collects and manages more than a billion records a day for its customers, which include nine of the country's top ten credit-card issuers and most major retail banks, insurers and automakers. By integrating Acxiom's consumer data with Oracle's comprehensive MDM solutions, Oracle plans to provide customers with a pre-packaged, content-enriched customer information repository with unprecedented levels of data quality. This hybrid approach to customer data management will help clients conduct better, faster and easier MDM projects and perform more targeted marketing campaigns to cross-sell and up-sell into existing customer accounts.
Oracle's MDM solutions serve as a customer data hub to unify customer data across multiple business units and functionally disparate systems. Oracle's comprehensive functionality manages customer data over the entire lifecycle: from capturing customer data, to cleansing addresses and spelling, identifying potential duplicates, consolidating duplicates, enhancing customer profiles with external data and distributing the authoritative customer profile to the operational systems.
Microsoft MDM
http://www.microsoft.com/sharepoint/mdm/default.mspx
The Microsoft MDM Roadmap
http://www.stratature.com/portals/0/MSMDMRoadmap.pdf
http://msdn2.microsoft.com/en-us/library/bb410798.aspx#mdmhubarch_topic1
The IBM View of MDM
http://www.db2mag.com/story/showArticle.jhtml?articleID=167100925
cheers!
gyanaraj
*******Pls reward points if u find this informative

Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich Wortmann

I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use.

SRM Product / Material creation - Data flow to SAP MDM

Dear SAP friends,
I need your help with 2 issues. Thanks in advance for your collaboration.
Our client needs to create products and make them available to purchase almost immediately.
The scenario we had working for the last 2 years was: product creation in SRM (fields: short description / product category / measure unit), that would then be sent to SAP MDM for data enrichment, through BBP_CCM_TRANSFER_CATALOG (JOB running every 1 minute). This solution worked well for the last 2 years.
Recently, we are having some problems with this job. We noticed that, sometimes SRM doesn´t send the new products to MDM, and we think it´s a report performance problem. The report doesn´t maintain is normal behavior when executed every 1 minute.
SAP advice is to only run this report once a day. That would obviously require having a minimum time frame of 1 day between product creation and its availability (purchase), which isn´t acceptable in this client business model.
Question 1: Did anyone have a client with similar requirement? What was the implemented solution?
Because of report performance problems, we are running it (BBP_CCM_TRANSFER_CATALOG) every 5 minutes. It happens that sometimes, more than one catalog manager creates products in that time frame, and MDIS when importing the products to MDM, creates one unique workflow JOB making it impossible to assign it to both catalog managers for enrichment.
Question 2: How can we ensure that SRM sends only one product per xml files sent to XI / PI ? Or, perhaps, ensure that XI / PI splits the xml file sent from SRM into several files with one product each.
Thank you very much for your help in advance,
Best Regards,
João S. Carvalho

Hi meka
In product costing values flows as follows;
In product cost calculation raw material prices are costed which comes from material master in MM01
Product operations: i.e material BOM and master receipe or routings from PP module.From PP module operation costs comes in product costing.
In CO module: In Tcode KP26 we maintain activity\cost center planning for activities like machine hours, set up hours, labour hours etc.Here we define plan quantity and plan prices.
In Cost Sheet (KZS2) we maintain base cost elements & overheads and While order creation we calculate planned cost of that particular material.and then check the variances after getting actual cost of product.
Hope this will help you and if found useful assign points.
Let me know if you need more information.
Regards
Nilesh.

Help Required -- Can we use SQL Query to READ data from SAP MDM Tables

Hi All,
Please help.........
Can we use SQL Query to READ(No Creation/Updation/Deletion just Read) Data from SAP MDM tables directly, without using MDM Syndicator.
Or direct SQL access to SAP MDM tables is not possible. Only through MDM Syndicator can we export data.
Thanks in Advance
Regards

All the tables you create in Repository comes under A2i_CM_Tables in Database named as your repository name. So the tables names are fields of table A2i_CM_Tables. Now i tried it but cant make it.
Now, I dont think its possible to extract all fields in tables and there values using select query. May be pure sql guy can do that or not.
But there is no relation of data extraction and syndicator. Data is viewed in Data Manager. and you can also store data in a file from DM also.
BR,
Alok

SAP MDM Joining tables in console? Help needed.

Hi,
I am placed in SAP MDM Project.
Currently, we have an unique requirement.
We, have to join two tables of SAP MDM Console in an unique field
named(House No and PO Code).
Actually, we have a main table named Business Partner and a Flat table
named Address.
Now, we have a field named House No and PO Code(Business Partner) which I have made as unique.
Also, the Field named House No and PO Code(Address) is unique.
Now, my colleague suggested if we can make remote key mapping at the time of import
it will automatically populate the address data for each individual.
But it is not true. Remote Key mapping is a different concept.
If Remote key is mapped with any field of the Main table.
It will show remote key mapping for that field with a remote system.
When data is syndicated back after modification same data is reflected in that remote system.
Only thing that we can do is that make House No and PO Code (Business Partner) as Lookup(Flat) field and it is mapped with the Flat table Address.
Now, the SAP MDM Data Operator needs to select the address manually from say 10,000 address records for a person George Smith in main table(Business Partner).
No other way round.
Please suggest if there is any other way.
Thanks and Regards
Kaushik Banerjee

I am closing it.

Error during the installation of ORACLE 10g for SAP MDM 5.5

Hi all,
I am installing ORACLE 10g on a SUSE LES 9 for a future MDM 5.5 system. While I launch the Installer I get the following error:
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-09-26_07-11-46AM. Please wait ...oracle@mucsapt2:/home/lrougkal/OraDb10g/database> Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-09-26_07-11-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
        at java.lang.ClassLoader$NativeLibrary.load(Native Method)
        at java.lang.ClassLoader.loadLibrary0(Unknown Source)
        at java.lang.ClassLoader.loadLibrary(Unknown Source)
        at java.lang.Runtime.loadLibrary0(Unknown Source)
        at java.lang.System.loadLibrary(Unknown Source)
        at sun.security.action.LoadLibraryAction.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
        at sun.awt.DebugHelper.<clinit>(Unknown Source)
        at java.awt.Component.<clinit>(Unknown Source)
I have installed all the required packages from SUSE :
binutils-2.15.90.0.1.1-32.10
gcc-3.3.3-43.41
gcc-c++-3.3.3-43.41
glibc-2.3.3-98.61
gnome-libs-1.4.1.7-671.1
libstdc++-3.3.3-43.41
libstdc++-devel-3.3.3-43.41
make-3.80-184.1
pdksh-5.2.14-780.7
sysstat-5.0.1-35.7
xscreensaver-4.16-2.6
Any ideas?
Thanks in advance,
Loukas

Hi Elmar,
I have checked the packages and the XFree86-libs-4.3.99 is not installed. I guess I will have to install it.
Now your question about oracle user. I am not sure if you have performed any SAP MDM installation with ORACLE RDBMS but the installation guide is totally different than the normal SAP inst guides. Indeed someone needs to install separately SAP MDM and ORACLE and in my installation I do not install NetWeaver since it is not mandatory for the testing phase of the project. You can have a look at the guide (it is very poor -no reference to ORACLE details):
https://websmp105.sap-ag.de/~sapidb/011000358700000271882007E
So the official ORACLE inst gudie says to install the ORACLE software with the oracle user.
Rgds,
Louka

Data Import from SAP R/3 to SAP MDM 7.1 without SAP PI

Hi All,
I have a requirement to import Vendor Master data from SAP R/3 to SAP MDM 7.1 on a regular basis. What are the Options available for data transfer between these two systems without any middleware(like SAP PI,etc). I checked the SAP Documentation and found the scenarios with SAP PI as middleware.
I have few very basic ideas:
1) Will there be any way for SAP MDM to pick a file from certain location and load the data..
2) Shall I use MDM ABAP API to write a program to connect to MDM Repository and schedule this at regular intervals to achieve the data transfer.
Pls suggest the best design approach..
Thanks in advance.

1) Will there be any way for SAP MDM to pick a file from certain location and load the data..
ANS : No, MDM will not pick up the file, file can be pick up from MDM Inbound folder and send from outbound folder for automize process and for MDM manual Process you can pick up and send file to local desktop, network shared path
2) Shall I use MDM ABAP API to write a program to connect to MDM Repository and schedule this at regular intervals to achieve the data transfer.
ANS : require to write code at ABAP side
so ABAP program will pick or send data file to MDM folder
Note following point
1. Require to write ABAP Program which will pick or send data file to MDM outbound / Inbound folder
2. Require to do some technical setting for ABAP program at SAP side, technical person will help regarding this matter
Note : There are many disadvantage and time consuming procss, monitoring file and it is not advisable to go without any intermidiate software for e.g PI, Tibco
Thanks,
Jignesh Patel

SAP MDM Vendor email addresses are not in order when sent to SAP R/3

Hi Experts,
We were trying to maintain vendor email addresses in this order in SAP MDM:
E-mail address: massupa@nexus
Sequence Number: 001
E-mail address: win@nexus
Sequence Number: 002
E-mail address: satita@nexus
Sequence Number: 003
But when saving the record, its order get mixed up like below: (I believe it was arranged alphabetically automatically---> is this the standard MDM functionality?!)
E-mail address: massupa@nexus
Sequence Number: 001
E-mail address: satita@nexus
Sequence Number: 003
E-mail address: win@nexus
Sequence Number: 002
When it gets syndicated to ECC, its order was maintained incorrectly with incorrect IDs:
E-mail address             ID
massupa@nexus        001
satita@nexus              002   -
> should be 003
win@nexus                 003 -
> should be 002
we checked both the XML Files and the IDOC and found that it has the same order maintained in SAP MDM
massupa@nexus        001
satita@nexus              003
win@nexus                 002
But how come the IDs were changed in R/3?
Many thanks in advance!

Hi Mike,
As per your requirement, i feel that for ID either you can create a new field say sequence ID in this e-mail addresses table of MDM and thus can syndicate it or can also use ID as key using remote key concept. I mean for this e-mail addresses table, you can set property Key mapping = yes in MDM Console and thus can use this IDs as key for this email address e.g. for massupa@nexus you can save ID as Key.
So during syndication, map this field with target IDOC structure field and I mean Remote Key under e-mail addresses table with IDOC ID target field. In this way you can have correct IDs with their corresponding email addresses.
Kindly let me know if you are looking for something else.
Regards,
Mandeep Saini

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

How to find the webclient in SAP MDM server

How to find the webclient in SAP MDM server
Thanks In Advance
GuruvaReddy

Hi Guruva,
If you are talking about MDM APIs, then you will get them from Service place when you download the complete MDM 5.5 Suite. You need to choose the API which is appropriate to you. MDM comes with 2 different APIs - Java API and COM API as of SP1(The news is.. ABAP API is under development).
Pre-requisite for building applications using Java APIs is basic Java skills.
Regards,
Rajani Kumar K

Vendor Master Fields to be considered for Centralization in SAP MDM

Hello Experts,
In my present assignment, we have 3 different ECC systems each for three different businesses. Now the objective is to consolidate, Harmonize and centralize the Vendor Master for all these standalone ECC systems in SAP MDM.
So multiple discussions are going on the which Vendor Master fields to be kept as Global fields and which ones as local in Central Vendor Repository in SAP MDM. The debate is whether should we keep "Vendor Account group" as Global field or as Local field in MDM.
The debate is each inidividual business unit has defined different account groups for the same vendor in their respective systems.
The question is : What is the best practice-- Should we keep Vendor account group as main table field and define Vendors with one unique account groups OR we maintain the account group in qualified table each pointing to different business unit.
Your inputs are highly appreciated
BR
PTM

Hi Manoj
The debate is each inidividual business unit has defined different account groups for the same vendor in their respective systems.
The question is : What is the best practice-- Should we keep Vendor account group as main table field and define Vendors with one unique account groups OR we maintain the account group in qualified table each pointing to different business unit.
In my opinion this is going to be very complex solution. Ideally we need to define all the Harmonization rules before syndicating data to different target systems.
Is this possibel that the same vendor record which is existing as vendor of different account groups in different systems have same set of attributes. If yes then enabling the remote key for Account group Lookup field is one option and defining a unique Account group 'AG" (which is mapped to say AG1 from remote system1, AG2 from remote system2 and so on..)..
Managing this via Qualified table will be very complex and not advisabel. As Rajesh also mentioned Account Group in MDM should be considered as Global attribute and all such harmonization rules should be defined in your project. AG1=AG2=AG in above exmaple.
Hope this clarifies.
Thanks-Ravi

Limitations in SAP MDM!!

Similar Messages

Maybe you are looking for