Limitations of SharePoint 2013 integration with Exchange 2010?

Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature. There is a Legacy Task Synchronization mode
available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization. It lets users manually sync specific task lists with Outlook. But there is no task aggregation. I found this
whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
http://www.microsoft.com/en-us/download/details.aspx?id=38799
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

Does Edge transport server for Exchange 2013 work with Exchange 2010?

Hello everyone,
I want to install Edge transport server for my Exchange servers,
Could you tell me if Edge transport server 2013 works with Exchange 2010?
Thank you in advance

Hello
tip:
https://technet.microsoft.com/en-us/library/jj898583%28v=exchg.150%29.aspx
2 If you want to create an EdgeSync
Subscription between an Exchange 2010 Hub Transport server and an
Exchange 2013 SP1 Edge Transport server, you need to install Exchange
2010 SP3 Update Rollup 5 or later on the Exchange 2010 Hub Transport
server.
sorry my english

Problem opening documents from SharePoint (2013) libraries with Office 2010 and 2013 components installed

Hi
I've been encountering the problem of Office files failing to open from SharePoint 2013 libraries with the prefix of 'ms-excel:ofv|u|' etc. in the url. Following the
helpful questions and answers in the forum, I've identified the likely cause as the fact that my main Office installation is 2010, but I also have installed OneDrive for Business 2013 (which I need in order to sync document libraries with my local drive).
The solution I've seen suggested elsewhere of deactivating the SharePoint integration of Office 2013 components fails for two reasons: there is no way (or at least, I can't find one) of deactivating SharePoint integration probably because, deactivating
SharePoint integration would likely stop the syncing of libraries/folders.
One thing that I have noticed in my case that I've not seen mentioned elsewhere is that if I right-click a document and select 'open in new tab/window' the required
document opens directly in the relevant office package. I don't know if this is a useful observation, but it seems to be new information.
My question is, is there a way I can continue to sync libraries and open Office documents directly in Office 2010? My thoughts are possible changes to registry settings
(which I can do, but don't know enough to find the correct ones myself) or (re)installation of software in some appropriate order to leave the correct settings.
I have 'repaired' my Office 2010 installation without any observed affect on behavior.
Thanks
Ray
(I've just seen a suggestion that Office 2010 SP2 may fix this issue. I've requested to test this, but whilst this may fix my problem, rolling it out to
other users may be more problematic. In the meantime, other suggestions of solutions are welcome)

Hi,
According to your description, it is a good way to do a test about office 2010 SP2, here is an article about this issue- limitations of using the OneDrive for Business sync app with Office 2010 applications , it may help you.
http://office.microsoft.com/en-us/sharepoint-help/solve-problems-youre-having-with-the-onedrive-for-business-sync-app-HA104047973.aspx
Paul Shui
Microsoft Online Community Support
Please remember to click “Mark as Answer?on the post that helps you, and to click “Unmark as Answer?if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Exchange 2013 DLP with Exchange 2010 mailboxes

Ive got an Exchange 2007/2010 environment. I've been looking at Exchange 2013 and am interested in the DLP funtionality.
There are no plans to move mailboxes to Exchange 2013 but would it be possible to install an Exchange 2013 CAS/Mailbox server in my environment and route email through it to make use of the DLP ?
Current environment consists of Exchange 2010 DAG, Casarray and hub transport servers, and Exchange 2007 mailbox servers, CAS and hub transports. Mail to the internet is sent to a smarthost.
Thank you.

Hi Maria,
DLP Policies are actually a specific transport rule. Since the transport rules with Exchange 2010 didn’t provide such feature to monitor and check the e-mail
content, I am afraid, in theory, it’s not possible.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Edge 2013 sp1 with exchange 2010 organisation.

Dear reader,
I have an exchange 2010 sp3 organisation with 1 client access server with hub transport and a 2 node DAG. Can I install a stand alone exchange 2013sp1 Edge role on a seperate machine in DMZ and subscribe the exchange 2010 hub transport to it. This
in preparation to move to exchange 2013sp1 later this year. The current exchange 2010 edge role is installed on a TMG 2010 machine. Since TMG 2010 is dropped and we also have issues with the current edge's mailflow, i'd like to have a dedicated Exchange edge.
Best regards,
Ruud Boersma
MCITP Enterprise administrator

Sure, You can install Edge of Exchange 2013 on a dedicated server in DMZ and subscribe with Exchange 2010 Transport server.
Or you can allow the Existing Exchange 2010 Edge server to serve your internet mail flow till the time you implement Exchange 2013 in the environment. I would suggest Exchange 2013 CU5 as a lot of issues were fixed in that which were identified with Exchange
2013 SP1.

SharePoint 2010 User Integration with Exchange 2010 New Users Created as Hidden and Later Unhidden not receiving email from SharePoint

When we have a new employee transfer to us from another department, their email is created and hidden until they actually make the transfer so they don't have two different email addresses in our global address list. When the transfer is made, the
email address is unhidden, but then we are unable to send emails to them from sharepoint 2010 without doing an IISReset. We are using Exchange 2010. Does anyone have suggestions on how to alleviate this issue?

Hi,
I have done a test, no matter the email address is hidden or not, we can both send email to the email address in the same domain.
How was the new employee from another department transferred to your department?
Whether sending emails to them need do an IIS Reset everytime.
Here is a similar post, you can take a look at:
https://social.technet.microsoft.com/forums/sharepoint/en-US/6a9043bb-2055-46a9-8e76-8b2698c1dbe5/user-not-receiving-sharepoint-emails
Best Regards,
Lisa Chen

Edge 2013 role with exchange 2010 organisation

Hi,
I have installed an edge 2013 cu5 stand alone in DMZ. I have an exchange 2010 cas server and separate database server on the intranet. How am I suppose to manage the edge 2013, since ecp it not installed as a part of this role?
I'm not yet upgrading to cas2013, so I do not have ecp. Can I install ECP seperatly on the edge2013?
Best regards,
Ruud Boersma
MCITP Enterprise administrator

Hi,
As Steve mentioned above, in Exchange 2013, we have to configure the Exchange 2013 Edge Transport role through Powershell in the Exchange Management Shell.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Some help with migrating exchange 2010 to exchange 2013 + installing another exchange 2010 to be edge-forefront-proxy server

Hi guys (and girls)!
Hear me up. The idea is like this:
A friend of mine has currently Exchange 2010 SP3 in his environment with Forefront Protection installed on it. As we all know Forefront Protection is discontinued in Exchange 2013 environment because Exchange 2013 on-premisses is using integrated tool for
doing that, but a friend of mine would really like to stick with Forefront Protection because it is "much better tool" then integrated stuff in 2013.
Ok, so here's the idea. Exchange 2010 SP3 with Forefront is installed on Phisical machine (so, not virtualized) on 2008 r2 std OS. We decided to move to Exchange 2013 because we wanted to achieve DAG on Exchange 2010 but we realized that is not possible
because 2008 R2 STD OS does not support failover-clustering functionality, but you are able to achieve that on newer OS for example 2012? Ok, so we bought another server, where we are planing to install Vmware Esxi and put two virtual machines on it.
One Will be 2012 r2 STD OS with Exchange 2013 on it, the other Will be 2008 r2 STD with Exchange 2010 Edge role + Forefront on it. We are planing to move Exchange 2010 production server to virtual machine Exchange 2013, and newly virtual machine
with Exchange 2010 edge server will only be "a kind of Proxy server with Forefront functionality". What concers me?
Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
bostjanc

Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
already answered by PS CL above
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
No it does not as long you don't make any changes on send/receive connector and do the EdgeSubscription. As soon as you do the Edge subscription there will be send/receive connector created, so pay attention how to setup the Edge Server.
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
Just install the Edge Transport Server and make sure you install ADLDS services.
as you have mentioned you are doing to install both Mailbox and Edge server on the same VMware - it is a single point of failure.
Where Technology Meets Talent

Disable Lync 2013 Client and Exchange 2010 Integration

Is it possible to disable integration to Exchange 2010 from a Lync 2013 client? I found a key that works for Lync 2010 by setting HKLM\Software\Policies\Microsoft\Communicator\PersonalContactStoreOverride to 1. That does not seem to do anything
to a Lync 2013 client, nor have I been able to find a solution to disable it via Registry/GPO. Some things I have found seem to indicate that key does is not used by a Lync 2013 client but that is somewhat speculation. Can someone tell me if there
is a key to disable this connectivity and disable it like what the key above does for 2010? Thank you!

Create a new-csclientpolicyentry -name "PersonalContactStoreOverride" -value "1" and assign it to a Client Policy
see Raffaele's post at: http://social.technet.microsoft.com/Forums/lync/en-US/0762e036-1f9f-43a6-bb81-686864260c9d/how-to-install-the-lync-client-through-sms-with-personal-information-manager-set-to-none?forum=ocsplanningdeployment
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

AD RMS 2012 integration with exchange server 2013

AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Exchange 2013 Sp1 Coexistence with Exchange 2010 SP3 CU5 HTTP 500

I`m trying to make working OWA coexistence between Exchange 2013 SP1 and Exchange 2010 SP3 CU5.
When user login in to OWA where his mailbox is located on Exchange 2013 server it logon successful and owa opened. When i try to login to the same url with user whose mailbox is located on Exchange 2010 server i get Error http 50
The website cannot display the page : HTTP 500 »https://URLEXCHANGE2013/owa/auth.owa«
The same is, when i use https:// URLEXCHANGE2013/ecp?ExchClientVer=14
URL on Exchange 2013 are different as fro Exchange 2010.
I even tried to setup Internal URL for Exchange 2010 to bi set to »null ,Saem error
Exchange server 2013 Sp1 is installed on Windows server 2012 R2.

Assumption is correct. I have even enable verbose logging, and i can see MSExchange Front End HTTP Proxy , that successfully connect to Exchange 2010 server.
But remember Exchange 2013 is fresh installation on Windows server 2012 R2.
IIS LOG
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=391fd8b3-2b98-494a-8812-d38feda2e5a0&cafeReqId=391fd8b3-2b98-494a-8812-d38feda2e5a0;
443 companyNT\SM_9c071c4922fd420fb fe80::99d1:f542:a4d3:b469%12 MSRPC - 200 0 0 5484
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_IN_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=27cfafa2-8224-4563-918b-0b228c6ee8d4&cafeReqId=27cfafa2-8224-4563-918b-0b228c6ee8d4;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 0
2014-03-04 08:52:53 fe80::99d1:f542:a4d3:b469%12 RPC_OUT_DATA /rpc/rpcproxy.dll [email protected]:6001&CorrelationID=<empty>;&RequestId=6d930bcd-7bbc-415a-a25a-8d6488e91401&cafeReqId=6d930bcd-7bbc-415a-a25a-8d6488e91401;
443 - fe80::99d1:f542:a4d3:b469%12 MSRPC - 401 1 2148074254 15
2014-03-04 08:52:55 10.1.0.36 GET /owa/ &CorrelationID=<empty>;&cafeReqId=551cfdd9-18ac-42d8-aea3-cbb546c9d9fb; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/
302 0 0 9937
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fOWA.company.com%2fowa%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c1b97df9-ec56-4906-b2f5-965551b720ae; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
https://OWA.company.com/ 200 0 0 1015
2014-03-04 08:52:56 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f&CorrelationID=<empty>;&cafeReqId=b92ca682-04f4-4d4f-931e-9a95680ab9ea; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C)
- 200 0 0 671
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=093bd01a-de59-4519-80f6-067484122091; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=c2f7565d-ee6a-48f8-8d86-16d5d3ca65c1; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=ba633030-2376-4bad-a32f-8f160bd87bd4; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING) - 302 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx url=https%3a%2f%2fEXCH2013%2fecp%2f&reason=0&CorrelationID=<empty>;&cafeReqId=5e94172c-d97c-46a9-a602-6030d6f7da2c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/logon.aspx replaceCurrent=1&url=https%3a%2f%2fEXCH2013%2fecp%2f&CorrelationID=<empty>;&cafeReqId=9ba2caf3-2a03-44a2-8477-2724689e139c; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 46
2014-03-04 08:52:58 10.1.0.36 GET /owa/auth/15.0.847/scripts/premium/flogon.js &CorrelationID=<empty>;&cafeReqId=62bb4655-3bfa-4e07-aa62-27c93e7e8b4d; 443 - 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 0
2014-03-04 08:52:59 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=9d52ec1a-2ee1-4954-85e6-89e7e5df407a; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 302 0 0 812
2014-03-04 08:52:59 ::1 GET /OWA/Calendar/[email protected]/calendar/calendar.html &CorrelationID=<empty>;&cafeReqId=4ea66475-9a47-41a4-81cb-6b569715d0d6; 443 - ::1 AMProbe/Local/ClientAccess - 200 0 0 8859
2014-03-04 08:53:01 10.1.0.36 POST /owa/auth.owa &CorrelationID=<empty>;&cafeReqId=b3db7480-2192-436c-b01d-29d0e528cfec; 443 UseronEX2010 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) https://OWA.company.com/owa/auth/logon.aspx?replaceCurrent=1&url=https%3a%2f%2fOWA.company.com%2fowa%2f
500 0 0 187
2014-03-04 08:53:04 127.0.0.1 GET /Microsoft-Server-ActiveSync/default.eas &CorrelationID=<empty>;&cafeReqId=2e2a655b-00b9-42ae-8789-1e452e6579c3; 443 [email protected] 127.0.0.1 AMProbe/Local/ClientAccess
- 200 0 0 8265
2014-03-04 08:53:14 10.1.0.36 GET /ecp/ &CorrelationID=<empty>;&cafeReqId=8741886f-b9b1-46f9-8c15-baf35809a12c; 443 [email protected] 10.1.0.36 Mozilla/4.0+(compatible;+MSIE+9.0;+Windows+NT+6.1;+MSEXCHMON;+ACTIVEMONITORING)
- 200 0 0 15265
2014-03-04 08:53:14 127.0.0.1 GET /OWA/auth.owa &CorrelationID=<empty>;&cafeReqId=8ad938fb-f2c3-42bf-8718-da62b122422c; 443 - 127.0.0.1 AMProbe/Local/ClientAccess - 302 0 0 15
HTTPERR LOG :
2014-03-04 08:51:48 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:51:48 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 10.1.0.36 13937 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:25 fe80::99d1:f542:a4d3:b469%12 13872 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:52:30 127.0.0.1 14122 127.0.0.1 443 HTTP/1.1 GET /RPC/[email protected] 404 - NotFound -
2014-03-04 08:52:30 ::1%0 14121 ::1%0 443 HTTP/1.1 GET /ecp/ReportingWebService/ 404 - NotFound -
2014-03-04 08:54:42 ::1%0 14117 ::1%0 444 - - - - - Timer_ConnectionIdle -
2014-03-04 08:54:48 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:54:48 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 BadRequest MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 10.1.0.36 14211 10.1.0.36 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
2014-03-04 08:55:35 fe80::99d1:f542:a4d3:b469%12 14285 fe80::99d1:f542:a4d3:b469%12 444 HTTP/1.1 RPC_IN_DATA /rpc/rpcproxy.dll?EXCH2013.companyNT.local:6001 400 2 Connection_Dropped MSExchangeRpcProxyAppPool
Trace login, ok it is xml, so print is..
-Request Summary
Site
1
Process
8232
Failure Reason
STATUS_CODE
Trigger Status
500
Final Status
500
Time Taken
500 msec
Url
http://EXCH2013.companyNT.local:80/powershell?clientApplication=ActiveMonitor;PSVersion=4.0&sessionID=Version_15.0_(Build_846.0)=rJqNiZqNgZuQkpqT0pqH0ZuQkpqTkYvRk5CcnpOBzsbLzsbGyczJyIHPzNDPy9DNz87L38/Gxc/KxcrJ
App Pool
MSExchangePowerShellFrontEndAppPool
Authentication
Kerberos
User from token
companyNT\SM_9c071c4922fd420fb
Activity ID
{8000134C-0001-E300-B63F-84710C7967BB}
-Errors & Warnings
No.↓
Severity
Event
Module Name
157. view trace
Warning
-MODULE_SET_RESPONSE_ERROR_STATUS
ModuleName
ManagedPipelineHandler
Notification
EXECUTE_REQUEST_HANDLER
HttpStatus
500
HttpReason
Request Failed
HttpSubStatus
0
ErrorCode
The operation completed successfully.
(0x0)
ConfigExceptionInfo
ManagedPipelineHandler
See all events for the request

Delayed attachments with Exchange 2010 SP1

Hi folks,
we have a big issue here with Apple Mail in 10.6.8, 10.7.4 and 10.8.0, but particularly in 10.6.8.
When someone receives an e-mail with an attachment, it may be, that the attachment is delayed up to 5 hours. But in the Outlook Web Access, in Outlook 2011 for Mac and on iOS it appears immediately.
The exchange server is a 2010 SP 1 RU5.
Does any one have an idea on this?
Thanks a lot,
yaench

Hi,
Please refer to this link for exchange integration with Lync 2010
http://blog.schertz.name/2010/11/lync-and-exchange-im-integration/
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence?

Hi Team,
I am in the phase of upgrading Exchange 2010 to 2013, and introduced 4 MBX and 2 CAS of 2013 servers in co-existence.
Only one production mailbox of 2010 moved to 2013. The owa of the mailbox moved to 2013, is working OK internally coz only internally configured, but when I configure outlook using 2010 settings, it got configured but when I open outlook it doesn't
open and throws an error of some "cannot open set of folders".
Is it supported to connect Exchange 2013 Mailbox using Exchange 2010 CAS in Co-existence? because I havnt configured 2013 CAS servers yet.
Kindly share some KB or tip. Any help is appreciated. Thank You.
Muhammad Nadeem Ahmed Sr System Support Engineer Premier Systems (Pvt) Ltd T. +9221-2429051 Ext-226 F. +9221-2428777 M. +92300-8262627 Web. www.premier.com.pk

I'll change Adam's wording slightly - you *MUST* install a CAS 13 server into every site where there is a MBX 13 server.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Cisco 5 with Exchange 2010 and Database Availability Groups

Hi,
Unity 5 was installed a long time. Recently installed with the latest ES88 to the system. The fact is we have Exchange 2007 (clustered) mailbox server in the network environment, and introduced the Exchange 2010 (with DAG activated).
So far we didn't do any "re-partnering" from the Exchange 2007 to Exchange 2010. The end users are working fine by leaving voice message and can retreive their voice without too much issue, no matter where the End Users account are located, Exchange 2007 or Exchange 2010.
But lately, there was some actions taken in the Exchange environment. Some Exchange 2010 mailstore databases in one of the Exchange 2010 server, with DAG has been activated.
In this case, we are now unable to leave any voice messages to the end usrs. All the voice messages are now being held in C:\CommServer\UnityMTA.
Want to ask, does Unity 5 and Exchange 2010 compatible with DAG? Also, is that my problem is caused by re-partnering server not taken place? If yes, which Exchange 2010 mailbox database server I should point to? Reason is, there will have 3 physical servers, and with several DB mailstore, if I select one of the physical server, and one of the D mailstore, will this be affected when the DAG is activated?
Thanks
Timothy

Hi Yancy,
If you're referring to integrating Microsoft Exchange 2010 with Cisco Unified Communications Manager (CUCM) 5.x for voicemail purposes, via a SIP Trunk, then you could certainly have a go at it (a Media Termination Point would be required and the codec would be G.711). However, I'm not aware of anyone having properly tested it with CUCM 5.x; given that it's not having software maintenance releases written for it anymore. CUCM 5.0 stopped having software maintenance releases written for it in June 2009, and CUCM 5.1 in February this year.
The following Tech Tip is likely to assist:
https://supportforums.cisco.com/docs/DOC-12544
Kind regards,
Craig

Uploading photo from Lync client with Exchange 2010

We are using Lync 2013 standard edition with Exchange 2010 in our environment.
In the client, if we go to Tools -> Options -> My Picture, the option to "Edit or Remove Picture" is greyed out.
I understand this is only available if we're on Exchange 2013, but someone somewhere must have figured out a workaround for this? Anyone know a reg-hack or 3rd party tool that would enable this feature?
I realize there is a method to turn back on the "Show a picture from a website" via powershell. I have already done this in our environment. However it is quite unrealistic to expect general populace to know how to resize a picture to less than
30kb (?!) and upload it "somewhere" on the web. Understandably this would be a nightmare for Help Desk having to help people resize their photos and find somewhere to upload it to.
Any help/ideas would be appreciated!

You could centrally upload profile photos for your users into the AD's thumbnailPhoto attribute using...
powershell:
http://blogs.technet.com/upload-picture
3rd party software:
http://www.codetwo.com/freeware/active-directory-photos/
http://www.cjwdev.co.uk/Software/ADPhotoEdit/Info.html
Lync client side upload into Exchange 2010 will not be possible as Exchange 2013 introduced HD photo and storing photos in the mailbox. Take a look at: http://technet.microsoft.com/en-us/library/jj688150.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

Limitations of SharePoint 2013 integration with Exchange 2010?

Similar Messages

Maybe you are looking for