Limitations when pasting into the replace field when search and replacing?
Hi,
I seem to be unable to paste ALL of the code from my pasteboard when searching and replacing, is there a way to increase the characters?
Thank you.
Replacing 500 lines of code is not possible with Find and Replace. The underlying functionality relies on JavaScript. Cramming 500 lines of code into a JavaScript replace command is likely to give Dreamweaver the screaming heebie-jeebies.
What I suggest you do is to use the Find and Replace dialog box to find what you want to delete, and replace it with something immediately recognizable, such as:
PASTE HERE
You can insert new lines in the Replace field by holding down the Shift key and pressing Enter/Return.
Then locate the placeholder, and paste in your 500 lines of code.
Similar Messages
-
When I paste into the form, it pastes 3 times. How do I get it to paste 1 time?
When I paste into the form, it pastes 3 times. How do I get it to paste 1 time? WANt to copy text from a pdf and enter into a form- 1 x.
My bet is that there are 3 copies of the same field one on top of another.
You can verify this by going to Form Edit mode and inspecting the fields
list. -
Adobe PDF Printer crashes when pasting in the filename field
Greetings, first off there is no similar problem with any freeware pdf printers so I want to rule out my system config as being the culprit. This only happens in Adobe PDF.
How to reproduce the problem? Have something in your clipboard and try to paste it into the filename field when printing the file as a pdf - you should have now crashed whatever you were trying to print and the program behind it.
Please make a fix for this, it is ridiculous that I have to install a second, freeware, pdf printer because thousand dollar software is not working properly. And I have lost tons of receipts and work this way.I'm having a similar issue, on windows 7, 32 bit desktop system, using Windows Live Mail, with Acrobat X standard:
Any time I try to "print to pdf" an email, just attempting to enter a file name for the pdf (no cut-and-paste), the dialogue box freezes, I can enter several characters, then the keyboard just freezes, the dialogue box becomes unresponsive. WLM ends up crashing. My work around is to not attempt to specify a name, just go with what Acrobat supplies, typically some thing like 00008.pdf. Then edit the name, and/or location, within Windows Explorer.
I've tried repairing the install, believe that actually worked, a few months back. Tried again today when the problem cropped up again, but repairing the install didn't help.
This has been ongoing for me for some months now. Not situation normal. Don't want to be snippy, but seems like tech support response is VERY slack... -
I have Photoshop CS6, Windows 7, I have no entry at the accesscode. When i will write the code into the nummeric fields. I can write only numbers, but no letters. What can I do?
If you are talking about the serial number, as far as I know serial numbers are entirely numeric so there is no need to enter letters. Maybe you are using the incorrect code.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html -
When I open a new tab, the cursor doesn't go automatically into the navigation field anymore, since I have reinstalled Firefox yesterday. Is there a fix?
Did you remove your personal data when uninstalling and have created a new default profile folder?
It is possible that you previously had an extension that set focus to the location bar.
*Custom New Tab: https://addons.mozilla.org/firefox/addon/custom-new-tab/ -
Why when I copy a cell and paste into another it pastes into the middle of three cells?
Why when I copy a cell and paste into another it pastes into the middle of three cells? I was very fond of using numbers as it was straightforward and much better than Excel. But I made the mistake of installing Mavericks and Numbers 3.0. Now it is worse than Word at doing what it thinks it wants to do rather than what you want to do. I can no longer copy a cell and paste it into another. For some reason on pasting, instead of pasting into just one other cell it pastes into the middle of three cells - what the ****?
Thanks Badunit for your quick response
I have found the answer - it is a incompatabilty between CopyPaste Pro and Numbers: -
Thanks dbg1596 - solved my problem with which I wasted a good couple of hours getting more and more frustrated with numbers 3.0
I had the same problem - copy a cell - paste into another cell and it created three vertical cells with the pasted data in the middle
Definitely a problem between CopyPaste Pro - one of the most useful aps on my Mac for the last many years
Once I quit CopyPaste Pro - no problem with pasting in Numbers 3.0
But I use CopyPaste Pro all the time
Have the folks responded to your query?
But I use CopyPaste Pro all the time - hope that it can be sorted sooner rather than later -
I cannot paste into the body a a Gmail message when using FFox but can di so using IE.altho
I cannot paste into the body a a Gmail message when using Firefox but can do so using IE
Occasionally when I paste only portion of the text appears but now I cannot paste any text at llHello ymda, '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
Restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Thank you -
When I plug my ipod touch into the computer it just charges and won't appear on itunes!
when I plug my ipod touch into the computer it just charges and won't appear on itunes!
http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
I want to copy and paste a long list of phone numbers into the 'to' field of messaging. All it does is become one long number instead. I have even tried commas in between. Any ideas? (They are NOT contacts)
That's not how iMessage was designed to work. It works with your contacts. You start typing a phone number or email address and you'll se a list of hint from auto-complete. After you select a suggestion, start typing another address. If the addresses you want are not in your contacts, you'll need to enter each of them manually.
-
Update the data into the ZTABLE fields thru program logic ..?
hi all,
i have ZTABLE1,ZTABLE2,ZTABLE3, and this tables like ALV grids using object methods.
in the same table fields now i wanted to update the data into the ZTABLE fields thru program logic .
could anyone please help me ....
please provide if anyone of have any program logic that would be helpfull to me.
thanks in advance...
srinivas....Hi Srinivas,
The following statements are used to upload the data into custom tables.
1. Modify
2. Update
3. Insert
if you are using OO ALV, you should enable the 'SAVE' button in the main toolbar. if the user press the save button, then you should upload the data to the custom table.
please find the example code, in this example 'PERFORM F_SAVE_DATA'(here i gave the message only, you write your own logic here) is used to save the data in custom table.
Report Program: ZB_ALVOOPS_TEST
Line:-----
REPORT ZB_ALVOOPS_TEST MESSAGE-ID ZCR_MESSAGES.
Top Include - Global Data Declaration *
INCLUDE ZB_ALVOOPS_TEST_TOP.
SEL Include - Selection Screen *
INCLUDE ZB_ALVOOPS_TEST_SEL.
AT SELECTION SCREEN *
Initialization Event *
INITIALIZATION.
Initialize Screen Number.
PERFORM F_INITIALIZE.
Initialize Field Catalog for ALV Grid.
PERFORM F_INITIALIZE_GRID.
END-OF-SELECTION.
Call Display Screen *
CALL SCREEN 9000.
Event Handler - Class Definition and Implementation *
INCLUDE ZB_ALVOOPS_TEST_CL01.
PBO Event - Module Implementation *
INCLUDE ZB_ALVOOPS_TEST_PBO.
PAI Event - Module Implementation *
INCLUDE ZB_ALVOOPS_TEST_PAI.
Subroutine Include *
INCLUDE ZB_ALVOOPS_TEST_F01.
Include: ZB_ALVOOPS_TEST_TOP
Line:-------
Type Declaration For Internal Tables *
Collection Data
TYPES: BEGIN OF TY_MARA ,
MATNR TYPE MATNR , " Material
VPSTA TYPE VPSTA , " Maintenance status of complete material
MTART TYPE MTART , " Material Type
MBRSH TYPE MBRSH , " Industry Sector
MATKL TYPE MATKL , " Material Group
BISMT TYPE BISMT , " Old material number
MEINS TYPE MEINS , " Base Unit of Measure
BSTME TYPE BSTME , " Order unit
BRGEW TYPE BRGEW , " Gross weight
MAKTX TYPE MAKTX , " Material Description
ROWCOLOR TYPE CHAR4 , " Row Color
END OF TY_MARA .
Flag *
DATA: FG_REFRESH TYPE XFLD , " Used to Refresh ALV
FG_SAVE TYPE XFLD . " Data Saved Or Not.
Internal Table Declaration *
DATA: IT_MARA TYPE STANDARD TABLE OF TY_MARA , " Internal table for Material
WA_MARA TYPE TY_MARA . " Workarea for Material
Variable Declaration For General Constants *
CONSTANTS: C_SCREEN_SELECT TYPE SYDYNNR VALUE '9001' , " Selection Screen Number
C_SCREEN_SELECT_NIL TYPE SYDYNNR VALUE '9002' , " Empty Screen Number
C_STATUS9000 TYPE CHAR10 VALUE 'STATUS9000' , " PF-Status
C_TITLEBAR TYPE CHAR4 VALUE '9000' , " Title Bar
C_ISSUE_CONTAINER TYPE SCRFNAME VALUE 'WORKCONTAINER', " Container Name (Screen Painter)
C_BUTTON_TYPE TYPE CHAR1 VALUE '3' , " Button Type
C_EXECUTE TYPE CHAR4 VALUE 'SELE' , " Functions 'SELE' -> Execute
C_BACK TYPE CHAR4 VALUE 'BACK' , " Functions 'BACK' -> Back to main screen
C_ENTER TYPE CHAR5 VALUE 'ENTER' , " Functions 'ENTER' -> No Action
C_SEL01 TYPE CHAR5 VALUE 'SEL01' , " Functions 'SEL01' -> Toggle Function
C_SAVE TYPE CHAR4 VALUE 'SAVE' , " Functions 'SAVE' -> Save Function
C_REFRESH TYPE CHAR7 VALUE 'REFRESH' , " Functions 'REFRESH' -> Clear and Fres All objects
C_ADD_MI TYPE CHAR6 VALUE 'ADD_MI' , " Functions 'ADD_MI' -> Add New Media Issue
C_TRUE TYPE CHAR1 VALUE 'X' , " Set X value
C_REQUIRED TYPE CHAR1 VALUE '1' , " Un-Confirmed Qty field obligatory or not.
C_INPUT TYPE CHAR1 VALUE '0' , " Reason field should not be input.
C_ALV_SAVE TYPE CHAR1 VALUE 'A' , " ALV
C_ERROR TYPE CHAR1 VALUE 'E' , " Error Type
C_SIGN TYPE CHAR1 VALUE 'I' , " Sign
C_OPTION TYPE CHAR2 VALUE 'EQ' , " Option.
C_COMMIT_WAIT TYPE CHAR1 VALUE '5' , " Waiting to update in DB
C_TABNAME TYPE CHAR1 VALUE '1' , " Parameter (ALV)
C_CANCEL TYPE CHAR1 VALUE 'N' , " Cancel
C_YES TYPE CHAR1 VALUE 'J' . " Yes.
Variable Declaration For Container and ALV Grid *
DATA: OBJ_CUST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER , " Container Class
OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID . " ALV Grid Class
Field Catalog Declaration For Container and ALV Grid *
DATA: IT_FIELDCAT TYPE LVC_T_FCAT , " Field Catalog
IT_EXCLUDE TYPE UI_FUNCTIONS , " Standard Function Exclude from ALV
WA_FIELDCAT TYPE LVC_S_FCAT , " For Field Catalog
WA_LAYOUT TYPE LVC_S_LAYO . " ALV Layout
Global Variable Declaration *
DATA: OK_CODE TYPE SY-UCOMM , " OK CODE ( Screen Attribute Don't Change the var.name)
G_SAVE_CODE TYPE SY-UCOMM , " OK CODE
G_ANSWER TYPE CHAR1 , " OK or Cancel.
G_SELECTION_DYNNR TYPE SYDYNNR , " Screen Number
G_ERROR_TEXT TYPE CHAR128 , " Error Text
G_SELECTION_TOGGLE_TEXT TYPE CHAR50 , " Toggle Text, Value: Hide Selection, Show Selection
G_MATNR TYPE MATNR , " Material
G_SMATNR TYPE MATNR , " Material
G_SMTART TYPE MTART . " Material Type
Include: ZB_ALVOOPS_TEST_SEL
Line:-------
Selection Screen
SELECTION-SCREEN BEGIN OF SCREEN 9001 AS SUBSCREEN .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_MATNR FOR G_SMATNR , " Material
S_MTART FOR G_SMTART . " Material Type
SELECTION-SCREEN END OF BLOCK SELECTION .
SELECTION-SCREEN END OF SCREEN 9001 .
Empty Selection
SELECTION-SCREEN BEGIN OF SCREEN 9002 AS SUBSCREEN .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION_NIL WITH FRAME TITLE TEXT-002 .
Nil
SELECTION-SCREEN END OF BLOCK SELECTION_NIL .
SELECTION-SCREEN END OF SCREEN 9002 .
Include: ZB_ALVOOPS_TEST_CL01
Line:-------
CLASS lcl_event_handler DEFINITION *
Event Handler Class Definition *
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
METHODS:
HANDLER_TOOLBAR FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
IMPORTING E_OBJECT E_INTERACTIVE ,
HANDLER_USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
IMPORTING E_UCOMM .
ENDCLASS. "lcl_event_handler DEFINITION
CLASS lcl_event_handler IMPLEMENTATION *
Event Class Implementation. *
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
Toolbar -----Create 'Add Issue' button
METHOD HANDLER_TOOLBAR.
DATA: L_WA_TOOLBAR TYPE STB_BUTTON. " Toolbar
CLEAR: L_WA_TOOLBAR.
Button Type
L_WA_TOOLBAR-BUTN_TYPE = C_BUTTON_TYPE . " 3.
APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
Add Issue Button.
CLEAR: L_WA_TOOLBAR.
L_WA_TOOLBAR-FUNCTION = 'ADD_MI' . " 'ADD_MI' .
L_WA_TOOLBAR-ICON = 'ICON_CREATE'.
L_WA_TOOLBAR-QUICKINFO = 'CREATE' . " 'Add Issue'.
L_WA_TOOLBAR-TEXT = 'CREATE' . " 'Add Issue'.
L_WA_TOOLBAR-DISABLED = ''.
APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
CLEAR: L_WA_TOOLBAR.
ENDMETHOD. "handler_toolbar
User Actions Events-- Handle 'Add Issue' Button Click.
METHOD HANDLER_USER_COMMAND.
CASE E_UCOMM.
Add Issue Button.
WHEN C_ADD_MI.
IF NOT G_MATNR IS INITIAL.
FG_REFRESH = C_TRUE.
PERFORM F_ADD_MEDIAISSUE.
ENDIF.
ENDCASE.
Refresh Control
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
Handle Exceptions
IF SY-SUBRC <> 0.
CASE SY-SUBRC.
WHEN 1.
G_ERROR_TEXT = TEXT-026. " 'Control System Error'.
WHEN 2.
G_ERROR_TEXT = TEXT-027. " 'Control CL_GUI_CFW Has Raised Error'.
ENDCASE.
MESSAGE G_ERROR_TEXT TYPE 'E'.
ENDIF.
Refresh Alv Grid.
PERFORM F_REFRESH_GRID.
ENDMETHOD. "handler_user_command
ENDCLASS. "lcl_event_handler IMPLEMENTATION
Object Ref. Event Class.
DATA: OBJ_EVENT_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Include: ZB_ALVOOPS_TEST_PBO
Line:----
Module STATUS_9000 OUTPUT *
Set PF-Status *
MODULE STATUS_9000 OUTPUT.
PF Status
SET PF-STATUS C_STATUS9000 .
SET TITLEBAR C_TITLEBAR .
ENDMODULE. " STATUS_9000 OUTPUT
Module Create_Alvgrid OUTPUT *
Create Or Refresh ALV Grid *
MODULE CREATE_ALVGRID OUTPUT.
PERFORM F_PROCESS_ALV .
PERFORM F_REFRESH_GRID.
ENDMODULE. " create_alvgrid OUTPUT
Include: ZB_ALVOOPS_TEST_PAI
Line:----
Module exit_command INPUT *
Exit Command ( Cancel and Exit ) *
MODULE EXIT_COMMAND INPUT.
LEAVE PROGRAM.
ENDMODULE. " exit_command INPUT
Module user_command_9000 INPUT *
User Command - Process toolbar Events *
MODULE USER_COMMAND_9000 INPUT.
Take an Action based on user Input
G_SAVE_CODE = OK_CODE.
CLEAR OK_CODE.
CASE G_SAVE_CODE.
Back
WHEN C_BACK .
Raise the Confirmation Message When User not saved the data.
IF FG_SAVE = C_YES.
PERFORM F_EXITCHECK CHANGING G_ANSWER .
IF G_ANSWER = C_YES.
PERFORM F_SAVE_DATA.
ELSE.
CLEAR G_SAVE_CODE.
ENDIF.
CLEAR: FG_SAVE.
ENDIF.
LEAVE PROGRAM.
Enter
WHEN C_ENTER.
Execute ( F8 )
WHEN C_EXECUTE .
IF IT_MARA IS INITIAL.
PERFORM F_SELECTMATERIAL.
ENDIF.
Toggle Button
WHEN C_SEL01.
PERFORM F_TOGGLE_SELECTION_SCREEN. " USING ok_code.
SAVE ( CTRL+S )
WHEN C_SAVE.
IF NOT G_MATNR IS INITIAL.
PERFORM F_SAVE_DATA.
CLEAR: G_MATNR.
ENDIF.
New Entry ( CTRL+F1 )
WHEN C_REFRESH.
PERFORM F_REFRESH_DATA.
ENDCASE.
ENDMODULE. " user_command_9000 INPUT
Include: ZB_ALVOOPS_TEST_F01
Line:----
Form f_toggle_selection_screen *
Toggle Function - Hide Selection / Show Selection *
FORM F_TOGGLE_SELECTION_SCREEN.
Toggle Function
IF G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_DYNNR = C_SCREEN_SELECT_NIL.
G_SELECTION_TOGGLE_TEXT = TEXT-902.
ELSE.
G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDIF.
ENDFORM. " f_toggle_selection_screen
Form f_initialize
Initialize Screen Number and Text
FORM F_INITIALIZE .
Initialize Screen Number
G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDFORM. "f_initialize
Form f_selectmaterial *
FORM F_SELECTMATERIAL .
Select the data from Mara Table
SELECT A~MATNR
A~VPSTA
A~MTART
A~MBRSH
A~MATKL
A~BISMT
A~MEINS
A~BSTME
A~BRGEW
B~MAKTX
INTO TABLE IT_MARA
FROM MARA AS A INNER JOIN MAKT AS B ON AMATNR = BMATNR
WHERE A~MATNR IN S_MATNR
AND A~MTART IN S_MTART
AND B~SPRAS = 'EN'.
IF SY-SUBRC = 0.
FG_REFRESH = C_TRUE.
FG_SAVE = C_YES .
G_MATNR = C_TRUE.
LOOP AT IT_MARA INTO WA_MARA WHERE BRGEW >= 200.
WA_MARA-ROWCOLOR = 'C310'.
MODIFY IT_MARA FROM WA_MARA.
ENDLOOP.
ELSE.
MESSAGE 'No data Found' TYPE 'E'.
ENDIF.
ENDFORM. " f_selectmaterial
Form f_initialize_grid *
Initialize Field Catalog. *
FORM F_INITIALIZE_GRID .
field catalog
PERFORM F_ATTRFCAT USING :
'MATNR' '1' '0' TEXT-005 '15' '0' 'X' ' ' ' ',
'VPSTA' '1' '1' TEXT-006 '15' '0' 'X' ' ' ' ',
'MTART' '1' '2' TEXT-007 '15' '0' ' ' ' ' ' ',
'MBRSH' '1' '3' TEXT-008 '15' '0' ' ' ' ' ' ',
'MATKL' '1' '4' TEXT-009 '15' '0' ' ' 'X' ' ',
'BISMT' '1' '5' TEXT-010 '15' '0' ' ' ' ' ' ',
'MEINS' '1' '6' TEXT-011 '15' '0' ' ' ' ' ' ',
'BSTME' '1' '7' TEXT-012 '15' '0' ' ' ' ' ' ',
'MAKTX' '1' '8' TEXT-013 '15' '0' ' ' ' ' 'C711',
'BRGEW' '1' '9' TEXT-014 '15' '0' ' ' ' ' ' '.
Set Editable Fields in ALV.
PERFORM F_SETEDIT_FIELDS CHANGING IT_FIELDCAT.
ENDFORM. "f_initialize_grid
Form f_setedit_fields *
Set Editable Fields in ALV *
C_IT_FIELDCAT <-- Field Catalog *
FORM F_SETEDIT_FIELDS CHANGING C_IT_FIELDCAT TYPE LVC_T_FCAT.
Local Variable Declaration.
DATA: LS_FIELDCAT LIKE LINE OF C_IT_FIELDCAT. " Field Catalog
Create Editable Fields.
LOOP AT C_IT_FIELDCAT INTO LS_FIELDCAT.
CASE LS_FIELDCAT-FIELDNAME.
WHEN 'BRGEW'.
LS_FIELDCAT-EDIT = C_TRUE.
WHEN 'MAKTX'.
LS_FIELDCAT-EDIT = C_TRUE.
ENDCASE.
MODIFY C_IT_FIELDCAT FROM LS_FIELDCAT.
ENDLOOP.
ENDFORM. " f_setedit_fields
Form f_attrfcat *
Update Field Catalog Internal Table *
U_FIELDNAME --> Field Name *
U_ROW_POS --> Row Position *
U_COL_POS --> Column Position *
U_SELTEXT_L --> Display Column Heading *
U_OUTPUTLEN --> Heading Output Length *
U_DECIMALS_OUT --> Number of decimal places in output *
U_KEY --> Key in ALV Display *
U_FIX --> Existence of fixed values *
FORM F_ATTRFCAT USING
U_FIELDNAME TYPE SLIS_FIELDNAME
U_ROW_POS TYPE SYCUROW
U_COL_POS TYPE SYCUCOL
U_SELTEXT_L TYPE SCRTEXT_L
U_OUTPUTLEN TYPE OUTPUTLEN
U_DECIMALS_OUT TYPE CHAR1
U_KEY TYPE CHAR1
U_FIX TYPE VALEXI
U_COL_COLOR TYPE LVC_EMPHSZ.
Update field catalog.
WA_FIELDCAT-FIELDNAME = U_FIELDNAME.
WA_FIELDCAT-ROW_POS = U_ROW_POS.
WA_FIELDCAT-COL_POS = U_COL_POS.
WA_FIELDCAT-COLTEXT = U_SELTEXT_L.
WA_FIELDCAT-SELTEXT = U_SELTEXT_L.
WA_FIELDCAT-OUTPUTLEN = U_OUTPUTLEN.
WA_FIELDCAT-DECIMALS_O = U_DECIMALS_OUT.
WA_FIELDCAT-KEY = U_KEY.
WA_FIELDCAT-VALEXI = U_FIX.
WA_FIELDCAT-EMPHASIZE = U_COL_COLOR.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "ATTR_FCAT
Form f_refresh_data *
Clear All the objects used in the program ( Data Related ) *
FORM F_REFRESH_DATA .
Clear All the Objects Used in Our Program.
CLEAR: S_MATNR ,
S_MTART ,
IT_MARA ,
OK_CODE ,
FG_REFRESH ,
FG_SAVE ,
G_SAVE_CODE ,
G_MATNR .
FREE: S_MATNR ,
S_MTART ,
IT_MARA ,
OK_CODE ,
FG_REFRESH ,
FG_SAVE ,
G_SAVE_CODE ,
G_MATNR .
Refresh Alv.
FG_REFRESH = C_TRUE.
ENDFORM. " f_refresh_data
Form f_process_alv *
1. Create Custom Container *
2. Create ALV Grid *
3. Exclude Standard Functions *
4. Display the ALV *
5. Register the Events. *
FORM F_PROCESS_ALV .
Display ALV
Custom Container
IF OBJ_CUST_CONTAINER IS INITIAL.
CREATE OBJECT OBJ_CUST_CONTAINER
EXPORTING
CONTAINER_NAME = C_ISSUE_CONTAINER.
ALV Grid
IF OBJ_CUST_GRID IS INITIAL.
CREATE OBJECT OBJ_CUST_GRID
EXPORTING
I_PARENT = OBJ_CUST_CONTAINER.
ENDIF.
Exclude Standard Functions
PERFORM F_EXCLUDETOOLBAR USING OBJ_CUST_GRID
CHANGING IT_EXCLUDE.
Layout.
WA_LAYOUT-CWIDTH_OPT = C_TRUE.
WA_LAYOUT-INFO_FNAME = 'ROWCOLOR'.
ALV Grid Display
CALL METHOD OBJ_CUST_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = WA_LAYOUT
IT_TOOLBAR_EXCLUDING = IT_EXCLUDE
I_SAVE = C_ALV_SAVE
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT[]
IT_OUTTAB = IT_MARA.
ENDIF.
Register Editable ALV Events
CALL METHOD OBJ_CUST_GRID->REGISTER_EDIT_EVENT
EXPORTING
I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED
EXCEPTIONS
ERROR = 1
OTHERS = 2.
*Create Object for Custom Event Handler Class if the ref. object is
*initial.
IF OBJ_EVENT_HANDLER IS INITIAL.
CREATE OBJECT OBJ_EVENT_HANDLER.
ENDIF.
Register Events
SET HANDLER: OBJ_EVENT_HANDLER->HANDLER_TOOLBAR FOR
OBJ_CUST_GRID,
OBJ_EVENT_HANDLER->HANDLER_USER_COMMAND FOR
OBJ_CUST_GRID.
Set Toolbar
CALL METHOD OBJ_CUST_GRID->SET_TOOLBAR_INTERACTIVE.
ENDFORM. " f_process_alv
Form f_excludetoolbar *
Exclude Standard Functions from ALV *
U_OBJ_CUST_GRID --> Instant for CL_GUI_ALV_GRID *
C_IT_EXCLUDE <-- Internal table for Exclude *
FORM F_EXCLUDETOOLBAR USING U_OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID
CHANGING C_IT_EXCLUDE TYPE UI_FUNCTIONS.
Exclude Standard Functions
CLEAR: C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_CHECK TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_REFRESH TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_CUT TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_DELETE_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_APPEND_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_INSERT_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_MOVE_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE_NEW_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_UNDO TO C_IT_EXCLUDE.
ENDFORM. " f_excludetoolbar
Form f_create_returnrequest *
Create Return Request based on the Work container ( ALV Grid Data) *
FORM F_CREATE_RETURNREQUEST.
Message to save
ENDFORM. " f_create_returnrequest
Form f_add_mediaissue *
Create New Media Issue if the user click 'ADD ISSUE' Button. *
1. Get the Input From User *
2. Get Total Delivery and Return Quantity *
3. Append to Final internal table *
FORM F_ADD_MEDIAISSUE .
Local Variable Declaration.
MESSAGE 'Add Button Clicked' TYPE 'I'.
ENDFORM. " f_add_mediaissue
Form f_refresh_grid *
Refresh ALV Grid *
FORM F_REFRESH_GRID .
Refresh ALV Grid.
IF FG_REFRESH IS NOT INITIAL.
CALL METHOD OBJ_CUST_GRID->REFRESH_TABLE_DISPLAY.
CLEAR: FG_REFRESH.
ENDIF.
ENDFORM. " f_refresh_grid
Form f_getcollectissue *
FORM F_GETCOLLECTISSUE .
Collection Plan Data
ENDFORM. " f_getcollectissue
Form f_perpare_final *
FORM F_PERPARE_FINAL .
Perpare Final Internal table
ENDFORM. " f_perpare_final
Form f_validate_data *
FORM F_VALIDATE_DATA.
Message if any data validation.
ENDFORM. " f_validate_data
Form f_modify_final *
Update Actual Delivery Qty and Return Qty in Final Internal table *
Form f_save_data *
Save the Data When User Click 'Save' Button *
FORM F_SAVE_DATA .
Message
MESSAGE 'Save Button Clicked' TYPE 'I'.
ENDFORM. "f_save_data
Form f_exitcheck *
When User Exit from the Transaction then Raise Confirmation message*
C_ANSWER <-- OK or Cancel. *
FORM F_EXITCHECK CHANGING C_ANSWER TYPE CHAR1.
Security Check.
C_ANSWER = C_CANCEL.
CALL FUNCTION 'POPUP_TO_CONFIRM_DATA_LOSS'
EXPORTING
TITEL = TEXT-039
IMPORTING
ANSWER = C_ANSWER.
ENDFORM. "f_exitcheck
Screen Numer : 9000
Line:------
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
CALL SUBSCREEN: SELECTIONSCREEN INCLUDING SY-CPROG G_SELECTION_DYNNR.
MODULE CREATE_ALVGRID.
PROCESS AFTER INPUT.
MODULE EXIT_COMMAND AT EXIT-COMMAND.
CALL SUBSCREEN: SELECTIONSCREEN.
MODULE USER_COMMAND_9000.
pls reward if it is useful -
my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.
I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan. -
trying to reset my password (which I have forgot) for elements 13 I have the serial no. But I can't find the right website to reset? I have "copy & paste " into the browser.
Go to the main page of adobe.com and sign out if you're already signed in there. Then click Sign In at the upper right of the page. In the next page you will see a Forgot Password link:
-
Yesterday Colloquy crashed on my iPad after an Arabic text string was pasted into the IRC channel that I was on. Another user using Linkinus under Mountain Lion on her Macbook Pro was also affected. As I understand it, this vulnerability has to do with applications that use Webkit. What is being done about it? Can we expect security updates for Mountain Lion and iOS 6 soon?
AFAIK, there has not been an update regarding this issue as yet.
Rendering bug crashes OS X, iOS apps with string of Arabic characters (Updated) | Ars Technica
You can send feedback to Apple > Apple - Mac OS X - Feedback -
When I type an address into the url field the browser will not load the page...it just sits there as though waiting for me to press enter. Also it won't respond to the recently used addresses that show in the dropdown menu. It will also not respond when I try to use the search engine field (google). This started yesterday after Firefox automatically updated to version 3.5.9. I don't get an error message, just no response at all.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
and i hope you understand my problem..
i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
-sierraHey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.
Maybe you are looking for
-
Hi All, I apologize if this has already been discussed, but I probably cannot guess the right search string to find the relevant thread. I've recently upgraded from FM6 Mac to FM9 Win. My old FM6 documents have two kinds of problems in FM9: 1) replac
-
Mozilla firefox 25.0 tab opens with error on URL res://ieframe.dll/unknownprotocol.htm#chrome-extension://kcnhkahnjcbndmmehfkdnkjomaanaooo/widget.html any idea? I believe this is a google voice extension but I do not have chrome installed on my PC Wi
-
Hello - Does anybody have any suggestions for a way to preview AVCHD / h.264 video clips in the Finder. Doing a search, I came across this and was wondering if anybody else has utilized this for previewing AVCHD files: http://www.shedworx.com/hdquick
-
Hi, New to Solaris 10. Can you direct me about the download and installation procedure for NTP on Solaris 10 Sparc. Thanks in advance ! Tx, S
-
Hi, some of the time we get the situation where program (in background job) takes unusal time for execution and it will keep running... I checked the memory utilization...logs..dumps....but no success.... when i go to SM50..I see only user and Report