Limited Access in parent objects not working

In my scenario I've a document library with several document sets. I break the role inheritence in the document set and provide individual permissions for users.
The thing is, that no limited access is granted to the parent object (list and web). Does that change in SharPoint 2013? I saw that the method AddToCurrentScopeOnly is new for developers - does SharePoint use that method, too for adding users?
Is there a way how I can change the behavoiur to the old one (like 2010)? Or what is the recommended workaround.
Thanks in advance!

Hi Fidy13,
In SharePoint 2010, it shows the Limited Access permission in the parent scope. For site administrators, it is very hard to manage site permissions because they cannot make sure where the limited users have permissions or not.
In SharePoint 2013, although it doesn’t show Limited Access permission in the parent scope, the users who have limited aceess permission can access the specified scope, and when you remove the permission in the specified scope, the limited access is removed.
It is convenient to site adminitrators to manage the site. So , I don’t recommand you change it.
Here is a similar post for you to take a look at:
http://social.msdn.microsoft.com/Forums/windowsapps/en-US/8ce65f4b-fe3b-4326-b4c3-41c0fb427c40/sharepoint-2013-limited-access-permission?forum=sharepointgeneral
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Verizon Access Manager Download link not working

Hi,
Verizon Access Manager Download link not working, Following Links
http://www.vzam.net/download/download.aspx?productid=872
http://pcdn2-download.vzw.com/win/7.7/VZAM_7.7.1_2727b-AC30-Web.exe
plz help to download verizon five spot access manager.
thanks
karthirocks

Hi karthirocks! I'm sorry to see you're having any difficulties using these links. I've clicked on both, but had no problems getting pages to launch or in getting the application to download. If this is still a problem for you, please describe the issue you're experiencing. Also, please share the browser version you're using, and if you've enabled any security feature that prevents access to certain secure sites or services. Thanks!
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Quicktime objects not working on GoLive

I have a GoLive CS2 Student Version. My Quicktime Objects are not working. I tried to drag the track objects to the page or to layer and no avail.
Can you help me? I spent a whole day to finally figure out the Quicktime objects not working.

Thank you for the support John,
To explain what I am doing in more detail: I am basically making an image gallery with thumbnail buttons of each image. When the user enters this page I want to have the automatic slideshow of a few images. Then the user have the option to click on the buttons to see the images. I was able to make a slideshow in GoLive. But the transition is abrupt. According to the GoLive Help Menu there is a way to make the trasnition smoother using the timeline editor, but it is too difficult to follow up for me. So I downloaded another program called SWFn'Slide which was very easy to make the smooth transitional slideshow. Now I am trying to insert the SWF file into my page. But I can't figure out how to do it. In my understanding, I must place a layer on the page and on that layer I must place the SWF track from the Quicktime Objects tab. But I cannot drag any of the Quicktime Objects tools into the page. Again I am having a problem inserting a SWF file into the page.

Account access to specific websites not working

On my daughter's computer (iBook, limited rights account) she can no longer access Facebook and a few others. (these sites work fine with admin account on this machine) Heard that fixing permissions and/or repairing the Keychain would work... Nothing working so far. Though Safari was the culprit, but behavior same in: Firefox, Camino, iCab, Chrome. (uninstalled addn'l browsers after testing)
What I've done to date:
Reset Safari and empty cache
http://forums.macrumors.com/showthread.php?t=280529
no change
Ran Keychain First Aid and verified date and time from Apple's server
http://support.apple.com/kb/TA20405
no change
matched proxy information
http://superuser.com/questions/67472/safari-cant-establish-a-secure-connection-t o-the-server
no change
repair permissions as admin, then DVD, then root
ACL found but not expected on 'private/var/root/Library/Preferences'
ACL found but not expected on 'private/var/root/Library'
ACL found but not expected on 'private/var/root'
several issues with 'permissions differ but will not be changed'
no change so far, but repair permissions from restricted account (with authorization) looks promising though I've been fooled before.
Don't want to have to nuke/rebuild the profile. I had a similar problem on my PowerBook several years ago, and APPLCARE walked me through a Terminal fix. (All my machines are out of warranty now)
Anyone else have ideas?

Fix permissions did NOT work, neither did booting as Single User with /sbin/fsck... Disk Utility with iBook in Target Mode reports "The volume iBook appears to be OK."

PIX 501 config - access to internal network not working from remote VPN users - everything on the inside is OK

One other thing - I had a problem with the key pairing so I rebuilt the rsa 1024 and the unit started working. Unfortunately I reloaded without the config in place and now I cannot get it to work again. Any help will be greatly apprecaited although I did review a dozen other posts of people having similar problems and for some reason there is never any conclusion as to the solution and I am not sure why.
Some other info from the client end:
I just ran the stats on the client and packets are being encrypted BUT none are decrypted.
Also Tunnel received 0 and sent 115119
Encryption is 168-bit 3-DES
Authentication is HMAC-SHA1
also even though the allow LAN is selected in the Cisco VPN client it states the local LAN is disabled in the client stats
also Transparent tunneling is selcted but in the stats it states it is inactive
I am connecting with the Cisco VPN Client Ver 5.0.07.0440
This config works. It is on the internal net 192.168..40.x and all users obtain dhcp and surf the web. It has required ports opened.The problem is that you can connect remotely via the VPN and you receive an IP address from the remote-vpn pool but you cannot see any machines on the internal network. The pix is at 40.2 and you cannot ping the pix and the pix from the remote PC connecting via the VPN and youcannot ping the remote PC from the PIX console when the remote is connected and receives the first IP address in the VPN pool of 192.168.40.25
I need to see the internal network and map network drives. I have another friend that is running the same config and it works but his computer is on a linksys wireless and has an IP of 192.168.1.x and the IP he receives from the VPN pool is 192.168.1.25 so I do not know if the same network is allowing this config to work even if there is an error in the config. In my present case I obtain the ip of 192.168.40.25 from the VPN pool and my connecting pc on 192.168.1.x I really am not sure how the VPN virtual adapter works. I am assuming it routes all traffic from your connecting PC to and from the virtual adapater but I really do not know for sure.
Other people have had similar issues with accessing the internal network from the VPN. One solution was the split-tunnel, another was the natting and another had to do with the encrption where there and an issue with the encrypt and ecrypt which was stopping the communicaton via the VPN.
I still cannot seem to find the issue with this config and any help will be greatly appreciated.
This is the config
interface ethernet0 100full
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password somepassword
hostname hostname
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
object-group network internal_trusted_net
network-object 192.168.40.0 255.255.255.0
object-group icmp-type icmp_outside
icmp-object echo-reply
icmp-object unreachable
icmp-object time-exceeded
icmp-object source-quench
access-list OutToIn permit icmp any xxx.xxx.xxx.0 255.255.255.248 object-group icmp_outside
access-list no_nat_inside permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list split_tunnel permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
access-list OutToIn permit ip any any
access-list outbound permit ip any any
(NOTE: I had many more entries in the access list but removed them. Even with the above two allowing everything it does not work)
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside xxx.xxx.xxx.xxx 255.255.255.248
ip address inside 192.168.40.2 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpn_client_pool 192.168.40.25-192.168.40.30
pdm history enable
arp timeout 14400
global (outside) 1 interface
I had this statement missing from the previous posted config but even with the nat (inside) 0 access-list no_nat_inside it still does not work.
nat (inside) 0 access-list no_nat_inside
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group acl_outside_in in interface outside
access-group outbound in interface inside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.40.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community $XXXXXX$
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set 3des_strong esp-3des esp-sha-hmac
crypto dynamic-map clientmap 50 set transform-set 3des_strong
crypto map vpn 50 ipsec-isakmp dynamic clientmap
crypto map vpn client configuration address initiate
crypto map vpn client configuration address respond
crypto map vpn client authentication LOCAL
crypto map vpn interface outside
isakmp enable outside
isakmp identity address
isakmp client configuration address-pool local vpn_client_pool outside
isakmp nat-traversal 20
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup remote-vpn split-tunnel split_tunnel
vpngroup remote-vpn idle-time 10800
vpngroup remote-vpn password ANOTHER PASSWORD
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 outside
ssh 192.168.40.0 255.255.255.0 inside
ssh timeout 30
console timeout 60
dhcpd address 192.168.40.100-192.168.40.131 inside
dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd enable inside
username AUSER password PASSWORD privilege 15
terminal width 80
****************** End of config
I have been searching docs and other people's postings trying to obtain the info to make this work. It appears pretty much boiler plate but I believe my problem is in the natting. I am using a range in the internal network for the VPN pool and I have tried switching this to other networks but this has not helped. Unfortunately I have been unable to get the PDM to work and I believe this is a PC config thing and I did not want to waste the time on it. I read a post where a person using the PDM interface with the same problem (not being able to access the internal network) was able to go to a section in the VPN wizard and set the Address Exeption Translation. They said they originally set the VPN subnet when they did not have to. Many of the other blogs I read also stated that if the natting is not proper for the VPN pool- that it will not work but I am confused by the examples. They show as I do the complete range for an access-list called no_nat_inside but I believe it should only have the VPN pool IP range and not the entire network since the others do require natting - not sure if my thought process is correct here. Any help will be greatly apprecaited. Also this morning I just tried a boiler plate example from CISCO and it also did not do what I need for it to do. And I also connect a PC to obtain an IP to see if I can see it - no good. The PC can ping the PIX and viceversa but no one can ping the remote PC that connects via the CISCO Remote VPN client even though it receive an address from the vpnpool. Also include LAN is checked off on the client. This was mentioned in anther post.
Thank you once again.

Hi,
PIX501 is a very very old Cisco firewall that has not been sold for a long time to my understanding. It also doesnt support even close to new software levels.
If you wanted to replace the PIX501 the corresponding model nowadays would be ASA5505 which is the smallest Cisco ASA firewall with 8 switch port module. There is already a new ASA5500-X Series (while ASA5505 is of the original ASA 5500 Series) but they have not yet introduced a replacing model for this model nor have they stopped selling this unit. I have a couple of them at home. Though naturally they are more expensive than your usual consumer firewalls.
But if you wanted to replace your PIX firewall then I would probably suggest ASA5505. Naturally you could get some other models too but the cost naturally rises even more. I am not sure at what price these are sold as used.
I used some PIX501 firewalls at the start of my career but have not used them in ages since ASA5505 is pretty much the firewall model we use when we need a firewall/vpn device for a smaller network/branch site.
Here is a PDF of the original ASA5500 Series.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.pdf
Here is a PDF of the new ASA5500-X Series
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/at_a_glance_c45-701635.pdf
I am afraid that its very hard for me atleast to troubleshoot this especially since I have not seen any outputs yet. Also the very old CLI and lack of GUI (?) make it harder to see what the problem is.
Could you provide the requested outputs?
From the PIX after connection test
show crypto ipsec sa
Screen captures of the VPN Client routing and statistics sections.
- Jouni

[CS5 Server/JSX] allGraphics parent geometricBounds not working on InDesign Server

Hi,
The following script works fine on InDesign Desktop CS5:
g = app.activeDocument.allGraphics;
for (i=0; i<g.length; i++)
g[i].parent.geometricBounds = [0,0,"150mm","150mm"];
g[i].fit(FitOptions.PROPORTIONALLY);
g[i].parent.fit (FitOptions.FRAME_TO_CONTENT);
When I run the script for InDesign Sever I get the following error:
Error Number 30614
Invalid object for this request,
g[i].parent.geometricBounds = [0,0,"150mm","150mm"];
Why does .parent not work on the server?

g = myDocument.allGraphics;
for (i=0; i<g.length; i++)
g[i].parent.geometricBounds = [0,0,"150mm","150mm"];
g[i].fit(FitOptions.PROPORTIONALLY);
g[i].parent.fit (FitOptions.FRAME_TO_CONTENT);
if(myDocument.textPreferences.smartTextReflow)
vDoc.recompose();
The solution!
Recompose() to automatically insert pages

MS Access 2013 Report - Sum not working on a calculated field that does work

The following statement works in the detail part of the report:
=([Qty]*[Install_Labor]*[Parent]![IntallLaborRate])*[Parent]![LaborMarkup]
But the following statement does not work in the group footer:
=Sum([Qty]*[Install_Labor]*[Parent]![IntallLaborRate])*[Parent]![LaborMarkup]
Why the heck not ?

I got it !!!
this worked
=Sum([Qty]*[Install_Labor])*[Parent]![IntallLaborRate]*[Parent]![LaborMarkup]
It appears the parentheses have to separate the non parent fields

Display/Change/Delete of planning object not working in BPS

Hi Guys
While displaying or changing object in planning workbench, system is taking too long to process the request and request doesn't completes even in hours. The following operations are not working
1. Delete Planning Area/Level.
2. Display/Change planning Level.
3. Display/Change Planning Layout.
4. When clicking on Variable Tab of infoarea.
5. When clicking on Set variable button.
In all of the above mentioned cases System displays a message "Generating Environment" and it runs for indefinite time.All this is ha0
We are on Suppport Pack 12 of BI NetWeaver(2004S)and we are using BPS for our planning application.
Thanks
Tripple k

Hi Dear
Thanks for info. i know that it will take some time to regenerate the BPS classes after making changes in cube but in my system its taking at least half an hour which i think is too much.....i don't think that its normal behaviour of system...
Thanks
Kamal

Create Type as Object not working in linux oracle 11g

Pleae refer to the following simple create type as object statement.
CREATE OR REPLACE TYPE EC_VIEWABLETYPES as object ( CASE_TYPE_ID NUMBER)
It is working in oracle 11g and windows server 2008 environment.
But it is not working in oracle 11g with linux environment.
I am executing this statement as dynamic sql as follows
CREATE OR REPLACE PROCEDURE TEMP_SP
AS
BEGIN
DECLARE vcType VARCHAR2(30);
BEGIN
SELECT OBJECT_TYPE into vcType FROM USER_OBJECTS
WHERE OBJECT_NAME='EC_VIEWABLETYPES' AND OBJECT_TYPE='TYPE';
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXECUTE IMMEDIATE 'CREATE OR REPLACE TYPE EC_VIEWABLETYPES as object ( CASE_TYPE_ID NUMBER) ';
COMMIT;
RETURN;
END;
END;
exec TEMP_SP
please let me know what i am missing ?

And error is:ORA-00600: internal error code, arguments: [kothc_uc_md5:lxerr], [], [], [], [], [], [], [], [], [], [], []
ORA-06512: at "ATIPAGENT.TEMP_SP", line 10
ORA-01403: no data found
ORA-06512: at line 1
..Query:exec TEMP_SP...Previous Query:CREATE OR REPLACE PROCEDURE TEMP_SP AS BEGIN DECLARE vcType VARCHAR2(30); BEGIN
SELECT OBJECT_TYPE into vcType FROM USER_OBJECTS
WHERE OBJECT_NAME='EC_VIEWABLETYPES' AND OBJECT_TYPE='TYPE'; EXCEPTION WHEN NO_DATA_FOUND THEN
EXECUTE IMMEDIATE 'CREATE OR REPLACE TYPE EC_VIEWABLETYPES as object ( CASE_TYPE_ID NUMBER) ';
COMMIT;
RETURN;
END;
END;

Substituting View object not working.....

Hi All,
I am working on iSupplier portal, I am trying to add requeter name on the line lavel of PO details page of iSupplier.
But the by substitutions of Standard View Object is not working.
1. I have extend the PosViewLinesVO object with Custome PosViewLInesVOEx
2. Add the View Object in the ViewOrderAM.class
3. Go to SSTest.jpr file and add the substitutinons by edit optin.
4.Then trying to test on the standalon . But the it's not working
5. The View PosViewLInesVO having viewlink with PosViewShipmentsVO so i am unable understand, if i am add a new column requeter name on the personalization than it giving error.
6. I f i open the about the page is shown both the view original view PosViewLineVO and the Extend View PosViewLinesVOEx.
Can any body help me. why the View Substitution is not working.
I have the screenshots of the error but am not able to attach it over here. Could you please ping me your ID so that I can forwards the Error Msg file to you guys.
In the doc,I have attached the screen sort and the requirement details.
Help Appreciated.
Thanks

If you are working on R12, there are some bugs with VO extension :
1)If a expert mode VO based on EO is extended and new attributes from EO are included, the new attributes turn out to be transient.The resolution is you would have to manually edit the extended VO xml file and include EO reference in new attributes.
2) If expert mode VO based on sql query is extended all attributes automatically become Update : Never in extended VO, you need to go to each attribute in VO wizard and change the type to Update:Always.
--Mukul

Re: Parental Control not Working

FROM A VERY ANNOYED NEW CUSTOMER. THIS IS MY LAST RESORT BEFORE I CANCEL WHAT APPEARS TO BE A RUBBISH 'PARENTAL CONTROL' SERVICE...
Brand new BT Infinity 2 Service installed on Wed 28th Jan. On Fri 30th Jan set router up... logged into bt.com/mybt... first screen showed 'Do you want Parental Controls' clicked 'Yes please'. Responding rotating circle stating 'ACTIVATING'. After a few seconds get standard error message saying 'Sorry, we haven't been able to activate your BT Parental Controls.'
I reported this on Fri 29th Jan... and now it's Thur 5th Feb and still no resolution. After numerous phone calls to BT Broadband Help and 'Parental Controls' support, with 5 promises that staff will call me back by a specified time/date (5 of 7 failed to do so)... and now escalated to level 3 issue... it is still not working.
Reading e-mails on this forum... looks like the service is fundamentally faulty.
Please advise how you can fix this within 24hrs MAX... or we will cancel our contract on basis BT have failed to provide the services contracted.
Many thanks for all assistance you can render.
Solved!
Go to Solution.

Welcome to this forum.
This is a customer to customer forum only,
This is where customers help each other get the most out of BT products & services.
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Java object with ArrayList of custom objects not working

I have a custom java object that has an ArrayList of another set of custom objects (code listed below). I can pull back a Customer object (to flex client) and it's recognized as a Customer action script object, but the ArrayList in the Customer object is not recognized as an ArrayCollection of Accounts. Instead it is an ArrayCollection of Action Script Objects.
At first I thought something was wrong with my action script Account class, but then I tried to pull back just an Account and it was recognized as an action script Account. It's just when I have my Customer object with an ArrayList of Accounts that it isn't getting converted.
Is there something else I need to do to have that ArrayList be recognized as an ArrayCollection of Accounts on the Flex Client side? Is there some way of specifying what type an ArrayCollection is mapped to?
Thanks in advance for the help!
public class Customer {
     private String name;
     private String address;
     private ArrayList<Account> accounts;
     public Customer(){
     public String getName(){
          return name;
     public void setName(String str){
          name = str;
     public String getAddress(){
          return address;
     public void setAddress(String str){
          address = str;
     public ArrayList<Account> getAccounts(){
          return accounts;
     public void setAccounts(ArrayList<Account> list){
          accounts = list;
public class Account {
     private long accountNumber;
     private String type;
     private double balance;
     public Account(){
     public long getName(){
          return accountNumber;
     public void setName(long l){
          accountNumber= l;

I accidently found how to make this work. I may have missed something while reading about blazeDS reflection, but I thought I'd pass this along anyway.
What I have is I have an class A. In class A I have an arraycollection of Class B. If I want that arraycollection to return to the server with the correct class, then I need to include Class B in the compiled swf. How I have done that is to create a dummy variable of type B. Importing B will not work you actually need to have a member variable of type B even if you don't need it.
Example
import dataobjects.B;
[RemoteClass(alias="dataobjects.A")]
public class A {
   private var _b:B; //This is never used, but needed to include B object in swf to be reflected.
   private var_ bList:ArrayCollection = new ArrayCollection();
public function A(){
public function set bList(list:ArrayCollection):void{
     _bList = list;
public function get bList():ArrayCollection{
    return _bList;

Network access when sleeping does not work.

My "Wake for network access" is not working.
I need to upload large files to clients.
I have my MBP plugged in and the screen is flip up not down. However when it goes to sleep when unattended, it loses network access.

My settings:

A/R Invoice linked object not working all the time

I have a LinkedButton that is set to SAPbouiCOM.BoLinkedObject.lf_Invoice. When the selected A/R Invoice has a Document Type of Service the link works. When the selected A/R Invoice has a Document Type of Items the link does not work and I get the following error:
"No matching records found 'A/R Invoice' (ODBC -2028)"
I there another property that I should be setting? I could not find anything.

Hi,
I've added a code sample that works fine for me.
add this code to a simple vb project with the correct references....
1. Enter a number of the Invoice you want
2. click on the second EditText to set the linkedButton
3. click the LinkedButton
<i>Public WithEvents m_App    As SAPbouiCOM.Application
Private Sub Class_Initialize()
Dim oForm As SAPbouiCOM.Form
Dim oDBDS As SAPbouiCOM.DBDataSource
Dim oItem As SAPbouiCOM.Item
Dim oLB As SAPbouiCOM.LinkedButton
Dim oST As SAPbouiCOM.StaticText
Dim oET As SAPbouiCOM.EditText
    Set m_App = getCurrentApplication()
   ' m_App.MessageBox "You have COM UI connection"
    'form
    Set oForm = m_App.Forms.Add("UUID")
    oForm.Height = 150
    oForm.Width = 400
    oForm.Top = 100
    oForm.Left = 400
    Set oDBDS = oForm.DataSources.DBDataSources.Add("OINV")
    'Edittext
    Set oItem = oForm.Items.Add("EditT", it_EDIT)
    oItem.Left = 200
    oItem.Width = 40
    oItem.Top = 50
    oItem.Height = 15
    Set oET = oItem.Specific
    Call oET.DataBind.SetBound(True, "OINV", "DocNum")
    'static
    Set oItem = oForm.Items.Add("StaticT", it_STATIC)
    oItem.Left = 50
    oItem.Width = 100
    oItem.Top = 50
    oItem.Height = 15
    oItem.LinkTo = "EditT"
    Set oST = oItem.Specific
    oST.Caption = "Business Partner Code"
    Set oItem = oForm.Items.Add("EditT2", it_EDIT)
    oItem.Left = 200
    oItem.Width = 40
    oItem.Top = 80
    oItem.Height = 15
    Set oET = oItem.Specific
    Call oET.DataBind.SetBound(True, "OINV", "DocNum")
    Set oItem = oForm.Items.Add("StaticT2", it_STATIC)
    oItem.Left = 50
    oItem.Width = 100
    oItem.Top = 80
    oItem.Height = 15
    oItem.LinkTo = "EditT2"
    Set oST = oItem.Specific
    oST.Caption = "Business Partner Decs"
    'linked button
    Set oItem = oForm.Items.Add("Linked", it_LINKED_BUTTON)
    oItem.Left = 180
    oItem.Top = 50
    oItem.LinkTo = "EditT"
    Set oLB = oItem.Specific
    oLB.LinkedObject = lf_Invoice
    oForm.Visible = True
End Sub</i>
Regards,
Yaniv G.
SDK Consultant,
SAP Manage Israel.

CS4's 3d object not working in snow leopard

when my system was leopard, photoshop cs4's 3d object is working properly...but when i upgraded it to snow cs4 indicates that the feature no longer support it....why was it? T_T

when my system was leopard, photoshop cs4's 3d object is working properly...but when i upgraded it to snow cs4 indicates that the feature no longer support it....why was it? T_T

Limited Access in parent objects not working

Similar Messages

Maybe you are looking for