Limited codecs choices in QT Pro and other applications
On my home computer when I access QT Player and use the export option and export as a QT movie, I have a long list of encoders to choose from in the drop down selection list. Apple ProRes 422 is among them. On my work computer when I try to select an encoding option there are far fewer options to choose from and Apple ProRes 422 is not among them. This same behaviour is seen when I use any application that allows selecting encoding codec. What determines the codecs that are available? How does one add additional codecs? Why is there this difference in the codec choices offered on my machines?
I am running Lion on both machines (Mac Pro and Mac mini). I have QT 7 Pro on both machines and I have FCPX on both machines.
Thanks for any enlightenment you might give me.
John
Perhaps I didn't phrase my inquiry very well. I wanted to know how to get the large collection of codecs that are on my home machine to be present on my work machine. The moderator at the Telestream Community Forum for WireCast understood my issue and gave me the solution.
Sorry! You asked specific questions which I attempted to answer without trying to address other issues. For future reference, the normal approach is to examine your system's component configuration to see what support is actually installed and evaluate potential conflicts which might prevent accessibility. Basically there are two primary folders to check— the root "~/System/Library/QuickTime" and the root "~/Library/QuickTime" folders which contain your "global" codec compoents/packages. The former normally contains the "system" installed codecs while the latter usually contains the add-on application and user installed codecs. While not used that much anymore, user_account "Library/QuickTime" folders may contain components installed for use by individual users on an independent "local" basis.
In your case, you were luckier than most users since you had two systems—one apparently working the way you wanted it to and the other not working the way you wanted it to. Therefore, your problem was reduced to a simple comparison of the two and add/eliminate codec components/packages on the "non-working" system to bring it into alignment with the "working" system.
Similar Messages
-
Nvidia CUDA driver update fixes crashes for Premiere Pro and other applications
We are seeing reports that the CUDA 5.5.47 driver update released today addresses the crashing problems introduced by the CUDA 5.5.43 driver update in Premiere Pro and other applications. So, if you have an Nvidia GPU, please update your drivers to use the most recent version of the CUDA driver.
Thanks!It should be added that only Macs and Quadros need the CUDA driver. That is not required for use with GeForce cards on Windows.
-
how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...
First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
Final Cut Pro - Wikipedia
There are a few apps that are better. I think you can run multiple instances of Handbrake for one.
I've read about and wanted to try PowerDirector 9 (Windows)
PowerDirector 9 video software
video editing software Wiki -
hello i just bought quicktime pro and the application doesnt open ( im on windows 7) tank you
hello thanks for helping i found where the problem was coming from but no how to resolve it. it sems like the AC3 format of avi video is in conflict with quicktime pro or something like that..
i tried to take some codec for avi video but none of them resolved the problem if somebody has any answers thank you very much. -
I downloaded xbmc to my MacBook Pro and the application failed to quit and is not responding it is telling me to press continue to logout but the track pad is not responding what do I do?
Press and hold the power button until the machine turns off. Then restart.
Clinton -
Cannot copy and paste words between EBS and other applications
hi,every one
I can't copy and paste word between Oracle EBS and other applications(such as MSword,excel) on a windows client.
the version of EBS is 11.59 and jinitiator, 1.1.8.16
has anyone ever encountered such problem and know how to resolve it?
thank you in advance
Message was edited by:
user466827Download the appltop.cer from the APPS server to the local Machine
Cd C:\Program Files\Oracle\JInitiator 1.1.8.16\bin
ftp <IP Address>
bi
cd /apps/oraprod/prodappl/admin
get appltop.cer
bye
Register that to the local identitydb.obj
Cd C:\Program Files\Oracle\JInitiator 1.1.8.16\bin
javakey c <name_it> true (creates a new trusted applet called )
( <name_it> in identitydb.obj )
javakey ic <name_it> appltop.cer (signs the new <name_it> trusted applet)
( with the new certificate appltop.cer )
javakey -l (will display your new trusted applet that has been signed)
(With the appropriate digital certificate file of the)
(Instance you wish to connect to. )
Clear The Browser Cache
Clear Jcache
Restart the Browser Session.
Regards,
Prasanna
[email protected] -
HELP! Finder and other applications keep crashing after application install
Okay, this was probably not a good idea considering I did not read that it was only for snow leopard... but I downloaded the Metalik theme from Julien Sagot's webpage (http://juliensagot.com/). Now, when I logged out and logged back into my account, I see that Finder keeps quitting and relaunching itself. Safari and other applications do the same thing. I cannot open any files or webpages!! (I am writing this on my other computer, haha)
What is happening!? How can I fix this and return my computer to normal?Boot the machine into safe mode, holding down the Shift key. If that's successful, delete the nonsensical stuff you installed and try a normal boot.
-
Question
on firefox clickable buttons are not clickable for me eg the + to open new tab ,the sign in . register and other applications buttons on this page wont click yet the 2 blue change buttons are fineTop of Firefox window non-responsive, toolbars non responsive -- also see [http://kb.mozillazine.org/Problematic_extensions Problematic extensions]
*caused by Yahoo Toolbar -- https://support.mozilla.com/questions/890908
*caused by Babylon Toolbar -- https://support.mozilla.com/questions/890670 -
From the day one the response is that (cannot able to determine the location) while using ios5.1 .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?.Which means that is there is any problem in my ipad ? currently running on IOS 6.
Your location is determined from a location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured. The database is built and updated by actually driving around and mapping router locations.
Since you just moved the location of your router has not been updated in the database and when you use Maps you will see your old location.
If you go outside your house you can be correctly located because your iPod sees other routers which are in the location database. Note that you do not need to be connected to a router for your iPod to see it and obtain its MAC address. -
How to set autosave option in flash and other Application
hi,
How to set automaticaly autosave and backup option in flash and other Application?
Thanks for reading!The Flash forums are here:
http://forums.adobe.com/community/flash
This forum is only for discussions on the forums themselves.
And when you post there, don't forget to add enough information about your specific setup. -
Please help me get my Pages back up and running. Thanks!
It's OSX 10.5.8
It's iwork 'O9
Yes, I can find it on my Application folder.
When I try to relaunch it, it says,"Mac OS X and other applications are not affected. Click relaunch to launch the application again. Click Report to see more details or send a report to Apple."
When I click "Relaunch" it just brings up the above messege. When I click "Report" it shows:
System Configuration:
Model: 1Mac8,1, BootROM IM81.00C1.BOO, 2 processors, Intel Core 2 Duo, 2.4 GHz, 1 GB
Graphics: kHW_ATIr600M74Item, ATI Radeon HD 2400, spdisplays_pcie_device, 128 MB
Memory Module: global_name
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, )x8C), Broadcom BCM43xx
1.0 (5.10.91.22)
Bluetooth: Version 2.1.9f10, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Airport, Airport, en1
Serial ATA Device: Hitachi HD72502525GLA380, 232.89 GB
Parallel ATA Device: MATSHITADVD-R UJ-875
USB Device: Built-in iSight, (null) mA
USB Device: Keyboard Hub, (null) mA
USB Device: Apple Optical USB Mouse, (null) mA
USB Device: Apple Keyboard, (null) mA
USB Device: IR Receiver, (null) mA
USB Device: Officejet 7300 series, (null) mA
USB Device: BRCM2046 Hub, (null) mA
USB Device: Bluetooth USB Host Controller, (null) mA
Problem Details:
Process: Pages [8469]
Path: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
Identifier: com.apple.iWork.Pages
Version: ??? (???)
Build Info: Pages-7270000~9
Code Type: X86 (Native)
Parent Process: launchd [7548]
Interval Since Last Report: 228218 sec
Crashes Since Last Report: 29
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report: 28
Date/Time: 2012-03-22 21:54:48.154 -0500
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: B46C2EC6-24E1-44F1-9B2B-76D5968C21E7
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @rpath/Inventor.framework/Versions/C/Inventor
Referenced from: /Library/Application Support/iWork '09/Frameworks/
SFCompatibility.framework/Versions/A/SFCompatibility
Reason: image not found
Then it tells me to "Send to Apple" I click it and it says, "Your report could not be submitted. Please try again later." -
I have a problem in the email alerts and Twitter and other applications in ios 7
I have a problem in the email alerts and Twitter and other applications in ios 7
push notifications not workingIf you don't have access to your rescue email address (you won't be able to change it until you can answer 2 of your questions) then see if the instructions on this user tip helps you get the questions reset : https://discussions.apple.com/docs/DOC-4551
-
Hi,
I am having problem with my push notifications of facebook and other applications on my 3gs ios5.0 device. I have done too many things have updated my facebook application but still it is not showing any push notification. Is there any settings that i need to do for it? Also it is not allowing me to show on mobile in facebook. Any one here can help?ok for facetime and imessage go into settings turn them off make sure to make an icloud backup and then go to settings general erase all content and settings and then set it up from the backup it should activate your imessage and facetime
-
Office 2004 and other applications suddenly stopped working
All of a sudden I've been getting the following with any Office application, and other applications have been exhibiting strang behavior as well. Specifically the error with any Office is:
"Application "could not be launched because of a shared
library error: <"
I can't even uninstall Office because the uninstall program generates the same error.
Also, iChat no longer works (opens for a split second then closes without an error msg) and iMovie give the following bizarro error message:
iMovie requires a “Quartz Extreme Compatible” graphics card. Certain iMovie features such as Themes, Ken Burns Photos, and Video FX may not work properly with your graphics card.
I'm running an intel iMac (OSX 10.4.8)
I have tried verifying & repairing permissions to no avail.
Anyone have any ideas how I can fix this? <br>
iMac Mac OS X (10.4.8)Visit The XLab FAQs and read the FAQ on troubleshooting shared library errors.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values. -
I have word, iTunes, and other application that starts automatically when I start my laptop and how can i change start up options?
Go to System Preferences / Accounts - Login Items.
In order to make changes, click the lock icon bottom left corner of the pane. You may be prompted for your admin password.
Select the apps you don't want to launch on startup then click - (minus).
Maybe you are looking for
-
New airport express flashes amber light
I just purchased an airport express. It keeps flashing the amber light. This morning my mac mini recognized its existence. It won't even recognize it tonight. On my computer, it says that the airport express is connected to our network, which is odd.
-
Asset history sheet (S_ALR_87011990)
Hi: I have a very basic question on asset history sheet (S_ALR_87011990). The selection screen defaults to history sheet version 0001. Can we change the default value to custom version, say 'Z001'.?? Thanks.
-
Distributing one reusable pdf form
My medical transcriptionist converts mp3 files into text and emails them back to me. I would like to distribute my pdf exam form to the transcriptionist so each mp3 file is transcribed on that form when emailed back to me. How do I allow the transcri
-
Skype access number for South Africa not working
Hi, I have been in South Africa for a while now and been using my Skype to Go Access number no problem. Since yesterday though it wont work. I keep just getting a busy tone when I call it from my mobile or a fixed line. How do I get this resolved? S
-
Pages 4.0 full screen not working in Yosemite
I just installed Yosemite (from Snowleopard). Now in Pages 4.0, the option to go fullscreen is faded out, and when I click the icon in the tab, it only goes into fullscreen mode for about a second and then drops back. I don't want to download 5.5, b