Limited ken burns effect and exporting out the slide show

im trying to create podcasts of photos ( perhaps 50 )
with OPTIMAL ken burns effects panning and zooming
with my own musical scores using garageband. Using transitions and Voice overs and eventually uploading to a web account with iweb.
Is it better to create this all in imovie?
Iphoto is too limited with its very limited KenBurns effect.
I also dont see the individual time setting option for each image. where is that in iphoto. It seems that every photo has to be the same duration.
some have recommended iphoto then garageband
but i see too many limitations with iphoto.
anyone have similar experiences?

Yes you can do this with vertical photos.
Click on the little icon at the top left of the photo thumbnail in your project. This will bring up the photo editing panel.
If you want the vertical photo to show up full screen, click crop, and pick which portion of the vertical photo you want to show.
If you want to see the entire vertical photo, click "Fit" and the entire photo will be shown, but there will be black space on either side.
Now click on "Ken Burns" to add the motion effect.
When finished click "Done".

Similar Messages

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

Ken Burns Effect and Letterbox

I am hoping to find a way to combine the Ken Burns Effect and letter boxing. My problem is that my letterbox is moving with the Ken Burns Effect. I have tried lots of trouble shooting, but can not come up with a solution. Does anybody have any experience with this?
Trey

Excellent. The generator suggestions worked like a charm. Just curious. What did you mean by adjustment layer. Surely it's something simple, but forgive me for not knowing.
Trey

Why is ken burns effect not working on individual slides I have amended when sent to iDVD

When making a slideshow in iPhoto, I changed the zoom and scan on individual slides as instructed in the Help dialog; these showed perfectly when played. However, when I shared the slideshow to iDVD, those particular slides were just 'still' and there was no Ken Burns effect at all. Why did this happen?

The Slideshow was created in iPhoto and then shared to iDVD. The Ken Burns effect works on all the photos that used the basic "Ken Burns' setting. However, on some of the photos I tried to amend the scanning to zoom into particular faces or parts of the photo. When I played the slideshow in iPhoto, these amended photos were exactly as I wanted, but after 'sharing' it and viewing it in iDVD, those photos I had altered were 'frozen' and the Ken Burns effect did not work at all, neither the automatic version, nor the specific way I had set it. All the other photos still had the Ken Burns effect as expected. I am using iPhoto 11, 9.1.5, I haven't had this problem in the past.
If you have any ideas why this should have happened I'd be grateful.
Thanks

Why does iPhoto have Ken Burns effect and Aperture does not?

Does anyone know why this is? In fact, I can't figure out why DVD Studio Pro (I have version 2 still, perhaps version 3 has it) and iDVD don't have it either.
Why would the "Pro" level apps not have this cool slideshow feature that the entry-level app does? Is this buried somewhere in Aperture and I haven't found it?
Brad

Kevin Burns? Never heard of him.
We have this battle about once a week in one or more of the world's Final Cut Pro forums. Folks moving up from iMovie expect access to a collection of pre-canned transitions and image movements inside the expensive upgrade. "Why else would it cost so much?" one can legitimately ask.
Having Burns in Aperture might be important to you so please don't take the following observations personally.
The issue for most video professionals is one of pride and deep, deep resentment. Designing and programming of appropriately timed and composed rostrum camera moves in x-y-z space is far more complicated than the more or less random settings the K-B button will impose. And Mr Burns, bless his pointed little head, is somehow getting credit for an animation technique that was perfected long before his grandfather was born.
Including junk like the Ken Burns Effect in Aperture, come to think of it, might have been the deal breaker for us. Such tripe would have telegraphed the overall emptiness of the application.
Again, I don't mean to poke fun at anyone who feel they get useful movies out of the KB button. These are my issues. But consider the presence on your Nikon/Canon of the "Helmut Newton Effect" button. Would you be tempted to use it? More than once?
bogiesan

Blurry Ken Burns effect and transitions problem in IPhoto6

I've never seen an answer for these problems, so i'm hoping someone can help. Whenever I use the Ken Burns effect (both the auto and when i do it manually) the photos are very blurry. I have tried large hig resolution photo's as well as lower es. Same result. I thought it might be proessing power or a graphics card issue, but even if i export it to Quicktime or IDVD it's the same blurriness. Is there a setting I need to change? Is my current set up just not capable of utilizing this?
Second problem is transitions. If I do different transitions between slide they frequently will be wrong. Mostly they default to dissolve. If I begin with say Mosiaic, it will work fine until i switch to dissolve, and then it will stay on dissolve, no matter what I change it to. Any help?
Sorry for two seemingly different issues, but I'm trying to do both at once.

Excellent. The generator suggestions worked like a charm. Just curious. What did you mean by adjustment layer. Surely it's something simple, but forgive me for not knowing.
Trey

MAKE A iPHOTO ALBUM ON A CD WITH KEN BURNS EFFECT AND MUSIC

I'd like to know how to save an album using the Ken Burns effect (pictures automatically panned or zoomed) and the music I've saved to the album from the samples given in Iphoto. When I try to open a CD with an album on it on a Windows pc, I get only the pictures and neither the Ken Burns effect nor the music, so all I can run is a simple slideshow, which looks anemic when compared with the full effect available on the Mac. Any ideas?

Export the Slideshow as a Quicktime Movie (File -> Export) and burn that to the CD.
Regards
TD

Can I turn the Ken Burn Effect off when using the iMovie app on my iPod touch 5th generation?

I have an iPod touch 5th generation and I'm trying to make a movie using the iMovie app. When I put an image on there it moves from side to side and zooms in and out. I believe this is called the "Ken Burn Effect". Is there any way that I can turn the Ken Burn Effect off without having to adjust the image position and zoom level to be the same for the start and end points?

Hello MisfitxCaleb
Unfortunately, the Ken Burns Effect cannot be turned off in iMovie for iOS. Like you mentioned above, having the photo at the same start and end point is the best way to make it appear as if it isn't moving/zooming.

This is my first time using iphoto, I am trying to make a slide show that I can then burn to a dvd. The slide show is complete, but I'm not sure where to go now. Can I burn the slide show from iphoto or do I have to export to imovie or idvd?

I have completed the slide show i am making, but not sure what to do now. I want to burn it to a dvd, but not sure if i can do that from iphoto or do i need to export to imovie or idvd? If i need to export, will iphoto save a copy in iphoto? This may be really stupid, but I don't see an obvious way to save my slide show in iphoto. Please Help!

Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
NOTE: If you're running iPhoto 9.5 the export options will be different.
OT

How to get Ken Burns effect to zoom out so the whole pic is visible

I want to start or end with the full pic in view - just as the FIT command does.
Then I want Ken Burns to Zoom/pan to make it interesting.
But I can't figure out how to re-size the frame beyond the 4:3 (or whatever is restricting it) ratio.
Tried dragging the frame edges with CTRL, ALT, SHIFT, and COMMAND. Nothing seems to release the constraint.
Thanks in advance.

I want to start or end with the full pic in view - just as the FIT command does.
If by "Fit" you mean the image exactly matches the display area, then you would have to "pre-crop" your scan to one of the available aspect ratios either before or after making your scan. If by "Fit" you mean "letterbox" or "pillar" views, then as Appleman said, you would have to either use the mentioned automator action or almost any graphic application. I prefer the manual approach so I can add a "text" area, frame, texture the background and/or image, and/or create other special effects.
But, how do I zoom the view out past the edges of the photo? If I press the FIT button in KB effect, it does it. But I loose the ability to zoom/pan... Unless there is some trick to getting KB effect to start or end with a FITted picture?
There isn't. iMovie '08 automatically scales the content to make the smallest dimension "fit within" the display area and, therefore, does not allow the "over-zoom" effect of "fitting" the larger dimension within the display area. You can however do this in iMovie HD. So if you want the "built-in" capability, this is a case where you should be using the the older application -- otherwise you will have to letterbox/pillar the content to get iMovie '08 to "Fit" your image as you wish.

I made a slide show in imovie using ken burns effect and when i transfer it to idvd the background shimmers. Is there a way around this?

If anyone has done this before and knows how to keep ken burns and lose the shimmer I would appreciate your help.

Add some blur to the image. I know it sounds crazy, but blurring the photo will reduce the flicker on a TV. DVDs are really low res. and by reducing the image detail will help prevent line flicker.

Why is the Ken Burns effect not responding to individual slide settings?

First try creating a slide show in iPhoto'11 (I've used previous versions on older Macs w no probs). Ken Burns eff for individual slide is no longer responding for ex when I try to set a time for slide or any other option for that matter. It seemed to work OK when I first tried it but then the KB screen went 'dead' for individual settings. Any ideas on what to do?

Yeah I misread part of your post but am happy to have helped in some way.
dekezib wrote:
I did read a previous post that helped: to activate the KB effect, click, grab and move the pic. It worked.
Dan
Strange. That does sound like some sort of bug, though. I wonder how the poster figured that little fix out?
Thanks for the star
Rick

Video clip did not export in the Slide show

I recently created a photo slideshow in Aperture for my grandmother's funeral. I exported it as a movie to play through apple tv but when it played the slideshow, the video clip was not there. When I preview the slideshow in Aperture, its there and it works. But it did not work as an exported movie. any suggestions?

My friend gave me his presentation into which he wants me to embed video clips of him talking on each page. The video clips will be made in Photo Booth when he comes to my house. I have made a practice video clip of myself with Photo Booth and see how there might be problems, and if so, what can I do?
The pages were initially text and graphs made in Excel and then placed into his PC Powerpoint program. Then I put that Powerpoint presentation into my Keynote program and thought that all was going well with my transitional devices and first and second page created in Keypoint.
Alas, the problem now is that I can get the original page to show up, and I can get the little video clip to show up, but I don't know how to make the window stay open until the video clip ends (when he finishes speaking to the page).
Do you have any thoughts about what I can do? Should I record him on the iMac's video cam rather than Photo Booth? If so, that's going to be new for me, since I have had this new iMac for only two weeks now.
~ Lorna in Southern California

Ken Burns effect won't work with imovie 6.0.3

I'm hopeful to find a way to use the Ken Burns effect in my 6.0.3 HD imovie. Does anyone have a solution to this problem? I can't get it to work.

Did you empty iMovie's trash after creating your clips? Did you previously apply the Ken Burns effect to that particular clip and now want to change the settings?
If you already had the clip/photo imported using the Ken Burns effect, and then emptied the trash, you cannot redo the KB settings. It is a bug in iMovie. You will get the black frame when you try. The only thing you can do is reimport the photo.
Here is an explanation of the problem (Thanks to Matti Haveri) :http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#stillupdate

IPhoto Ken Burns Effect

Does anyone know if you can just have the Ken Burns effect certain slides in a slideshow?

Hi Ben,
Yes you can.
Once you've "made" your slideshow,open the slideshow with the thumbnail photos across the top.
If you don't see thumbnails,go to iPhoto>View>Show thumbnails
Once you see the thumbnails across the top,select each picture for which you do not want the Ken Burns effect and look at the bottom. You can deselect the KB effect for each picture as you wish.
Best wishes,
Scott
Powerbook G4 17 1.5,iBook G4 1.33 14,macbook Pro,isight Mac OS X (10.4.7)

Limited ken burns effect and exporting out the slide show

Similar Messages

Maybe you are looking for