Limited wireless Conection on Lenovol G480

Dear Everyone,
My laptop has been set up Windows 10, After error Appear "Limited".I've changed Wifi Driver but it's not working.
So, I hope Form mem can help me.
Thank's.

Thuanph,
Usually "limited" connections can connect to the wireless network but aren't getting a proper IP address from DHCP. So you either have a static IP which is wrong for the network, improper DNS servers, or and issue with your router. 
You can try going to command prompt (press windows key+r to launch the run window, type
cmd and press enter)
Run each of these commands, pressing enter after each line:
ipconfig /flushdns
ipconfig /release
ipconfig /renew
Let me know if that resolves your issue.
Best,
Hessam
Windows Outreach Team- IT Pro
Windows for IT Pros on TechNet

Similar Messages

  • How can I create a wireless conection?

    My Sattellite pro A10 is supposed to come wireless enabled.
    Up till now I haven't used it, but am trying to connect to wireless internet.
    Windows help and user manuals point me to network conections and to click on wireless connections and search for available connections, but there is and has never been a wireless connection icon in my network connections (running windows XP service pack 2 btw)
    Can anyone suggest why and how I can create a wireless conection. The enabling switch on the front is on.

    Hello
    This unit is not known to me but I have found information that WLAN is optional. Please check if there is WLAN card. You can check it in device manager under Network adapters.
    If there is no WLAN card you must buy one.

  • How do I extend a wireless conection? for apple

    How do I extend a wireless conection? In Apple.

    Depends on what brand of router you have. If you have an Airport Extreme Base Station or Time Capsule, then you can use an Airport Express to extend the network wirelessly for use by a device using Ethernet, e.g., a computer or network printer. The latest Airport Express has two Ethernet ports available.
    Alternatively, you can run an Ethernet line from the router to the Airport Express and create a new network that is distant from the router. This would work on an AEBS, Time Capsule, or a non-Apple router.

  • I have dsl internet service  with a download speed of .66 mbps.  I would like to watch netflix with a wireless conection to apple tv.  What is the required internet speed?

    I have a dsl internet conection with a download speed of .66 mbps.  I would like to watch netflix with a wireless conection to apple tv.  What is the required internet speed?

    Welcome to the Apple Community.
    Netflix recommend a minimum connection speed of 0.5 Mbps, however at that speed many of the other features of the Apple TV will be painfully slow.

  • My Pcs don't see any wireless conection to airport extreme

    I have a Fujitsu laptop and an HP entertainment center with media center. Both are wi-fi enabled. I installed the airport extreme station on my imac G5 it works great. But when I tried to connect the pc wirelessly they don't see any wireless conection. What I have to do was conect the entertainment center with a network cable to the base station, so I can share my internet conection. Despite I put the base station right in front the pcs, they dont see it. I want to have real wireless in my apartment.

    Hi Lisetica:
    When you set up your Airport Exterme Base Station, did you select "Create a Closed Network"? If so, this will prevent your SSID from being broadcasted.

  • Limited Wireless on Satellite P855-s5312

    Need some help before I toss my brand new computer across the room! Windows 8. I'm wireless and everything is working fine, then about 10 mins into surfing the net it goes away and i loose connection and it says it on limited!
    I have to go in and fiddle around and spend like and hour trying to reset up the network, i have plugged my laptop into the modem.
    Any help suggestions please!

    Try downloading and installing this.
    Intel Wireless LAN Driver(v15.5.0.43.0.e64_wCAT; 08-30-2012; 8.45M)
    AndyJH, it's the one you started here.
    - Peter

  • Yoga 11S Limited wireless connectivity Running Windows 8.1

    I have limited connectivity on a known good open network. Any suggestions? Even if I use a usb wireless adapter I experience the same problem. The computer I am now using  (old R-40) connects seamlessly.Thanks carljon48

    I'm getting this too, and tried all the above to no avail.
    I get a couple of minutes of connectivity and then it will drop out, until I either reconnect or get Windows to resolve the problem where it says it was due to the default gateway not being available.

  • Limited Wireless Connection?

    I'm not sure if this goes in the right section, but when I try to connect to my wireless connection, it takes a long time and then says limited or no connection. The first time I installed windows, it was 5GB and FAT format. I realized it was too small and then did 10GB FAT format, but now the internet does'nt work. The time when it was 5GB it worked, but now it doesn't. I've seen similar posts to this, but I didn't get anything. Any help please?

    Double click the Wireless icon on the Taskbar.
    Click the Properties box.
    That should take you to the 'Wireless Network Connections Properties' dialog which has a list of Preferred networks. Click on yours, then click Remove.
    Then click on 'View Wireless Networks' and try to reconnect to yours.

  • Wireless conection do not work in Satellite R630-13U Code : PT31LE-00V006

    Hi all
    I have bought a new Satellite R630-13U Code : PT31LE-00V006CE two weeks ago. Problem is that I am not able to get connected to any Wireless network (neither open or encripted with WPA nor WEP).
    In my laptop I got it with Windows 7 installed. I am able to see the wireless network icon next to the clock down right corner of the screen, also I am able to select one of the netwoks that the pc detects and show in the list. Then once I select the network it asks me for the password, and if I introduce a wrong password, I get the right error message.
    Problem comes when I introduce the right password..... then after a couple of mins where I can see the "process bar" screen I get an error message that just says " Not able to connect to "WNetwork Name"".
    As I said I have tried this with several networks open or with security and with both levels of security (WPA or WEP). I have tried this with different networks, with different routers, and in different places.... but never got a wifi connection with this new laptop.
    I have tried uninstalling the broadcom adapter, and reinstalling it downloading the driver from the official toshiba web site, also I have installed the last version of the "Added Value Package".... but still is not working.
    I have other friends with HP, o DELL that are using Windows 7 which are able to connect to the networks I am not , and with no problem..
    What else should I try to get this fixed??
    Thanks a lot

    Hi all
    Thanks a lot for the answer, but I dont think I have understood it correctly. What you mean is that I need to use the same encription that works with the router and with the Wireless card of the laptop (Broadcom).... but for me that would not be the right answer I need.
    Imagine that this can be the solution, so we need to change the security settings of my home wifi network and of our office to the one being accepted by the laptop,..... but what happens if I need to go to a customer, or to a cafe.... Do I have to ask them to change the security settings???.... my other laptos (even toshiba's) works fine with other networks... routers.... why is this one not working?.
    I have uninstalled the wifi card driver and installed it from the last one found in the toshiba's support site.... dont know really what else I should do.
    Please any advice will be very pleased.
    Regards

  • Can I wirelessly conect my iPad2 to an Interactive White Board?

    I am looking to connect my ipad2 wirelessly to an Interactive White Board using the wi-fi network in my classroom. Has anyone managed to easily achieve this? Any suggestions?

    Yes.  In the Apple Store you'll find a number which will connect to different kinds of connectors.

  • How do I wirelessly conect to the internet with my imac 5.2

    cannot activate airport on imac any ideas. i need to pick up a wireless internet, is it hardware problem or download remedy or ????
    cheers,
    AFC

    Have you been able to connect to the internet before?  Are you sure your Mac has an airport card?  Is its antenna properly connected?  Is your modem showing the correct number of lights, indicating that its connected to the internet? Have you checked your Mac's connection to the modem?
    Lots of questions, please post back with answers,

  • 169.254.x.x and limited wireless connection

    Hi, I'm having some problems with my wireless network. I have a WRT54G router set up and 2 computers that connect to it wirelessly. My new laptop with vista can connect to my router and works well. My pc with xpsp2 does connect to my router but it has an ip address of 169.254.213.2, 255.255.0.0 for subnetmask, and the default gateway is blank.
    I set everything up to obtain automatic ip and dns info. I tried the repair icon on my task bar, but an error message comes up saying it couldn't renew the ip address. I tried ipconfig /release and /renew but renews with the same ips.
    From my pc, I tried pinging around:
    to my router (192.168.1.100) and it worked
    to my laptop (192.168.1.101) request got timed out
    to website (google.com) and it worked.
    From my laptop, I tried pinging:
    to my router (192.168.1.100) and it worked
    to my pc (169.254.213.2) and it worked
    to website (google.com) and it worked
    So, I THINK my problem is with my linksys network adapter.
    I use a WRT54G router
    My USB Network Adapter thats on my pc is a WUSB54G

    Your PC with address 169.254.213.2 is not connecting wirelessly to your router.  This address indicates a failed connection, and it is generated by the PC itself.  If you were connected to the router, your address would be 192.168.1.x
    The most likely cause is a computer software firewall problem.  Temporarily turn off your computer software firewall, and see if that helps.
    If you still have trouble, do the following:
    First of all, in the router, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings).  Reboot computer.  Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".  Reboot computer.  You should connect automatically (within 2 minutes).
    If the above does not fix your problem, download and install the latest driver for your wireless card.

  • [Solved] Wireless Conection Problems - Broadcom BCM4312

    Hello
    I recently installed Arch Linux on my laptop,
    however the only wireless driver that I know of that works is the proprietary one from broadcom here:
    http://www.broadcom.com/support/802.11/linux_sta.php
    I patched it with the patch found (it refused to compile beforehand):
    332c332
    <     .ndo_set_multicast_list = wl_set_multicast_list,
    >     .ndo_set_rx_mode = wl_set_multicast_list,
    However after installing Networkmanager it refuses to connect to a network when I click on one available in nm-applet; even after typing in my password to give it authorisation, not even a box comes up so I can enter the wep key. I then tried pressing on nm-applet and clicking "Create New Wireless Network" and selecting WPA & WPA2 for my wireless security and typing in my ssid and trying to connect. This time it got further along as it began trying to establish a connection with the network however no luck! I then tried the same thing except on a network with no security and obviously no network security selected and it Worked! It also allowed me to connect to networks with no security by clicking on the network from the available list rather than creating a new connection manually..
    However it is obviously going to be a detrament to me If I can't connect to Wireless networks that have security on them! All in all It simply refuses to work with my home network (I havn't tried other security other then WPA&WPA2) and only open security networks..
    Can Someone please help me to get this working ?
    Thanks
    DoctorZeus
    Last edited by doctorzeus (2012-01-21 15:10:59)

    Gusar wrote:Nope, the proprietary driver is not the only one that works. b43 works too. Just install the b43-firmware package from AUR.
    Thanks for the Reply!
    Do I need to use abs to install this? "pacman -S b43-firmware" doesn't find a package..
    Thanks
    DoctorZeus

  • Limitations while conected HANA universe to design studio

    Hi All,
    Previously i have created number of dashboard reports in Design Studio using BEx quires. Recently we moved to HANA database. From HANA we have universe connected to Design studio. Here we are facing some problems. It is not accepting huge data. when i tried to see the data in edit initial view, it is showing "data is too large ". looking to know about if any limitations and performance tuning while using HANA universe to Design Studio.
    Kind Regards,
    Sud.  

    Hi - please see the SAP Help page 68
    http://help.sap.com/businessobject/product_guides/AAD14/en/ds14SP02_user_en.pdf
    It says "Maximum Result Set The result set has a fixed limit of 5000 rows or 50000 data cells. If either limit is exceeded, no data is displayed"
    Please also search SCN before posting per the SCN rules, as this has been asked before.
    Thank you

  • Netgear DG834GT Wireless Conectivity Issues with MacBook Pro

    Just purchased a Macbook Pro (my first MAC !!!) and I can't get it to connect wirelessley to my Netgear Router using any of the encryption options. I connect using WEP to my Windows Notebook and can connect the MAC using the cable but need to connect wirelessly . Help please in words of one sylable

    Can it connect with WEP or WPA disabled? Don't worry a band of rogues will not descend on you for the 5 minutes you check that out. Diagnose if it works at all first. If you have then say so.
    Try preceding the WEP key (which I presume is F6D3A0C2...etc.) with a $ sign.
    Note WEP can be broken in under 5 minutes so you are using really poor security. WPA works on your mac and is so much more secure, and the pass phrase (e.g. my dog spot and cat harry have blue feet) are easy to remember and type in.

Maybe you are looking for

  • Iphone 4 Calendar Issue

    Suddenly my Calendar on my Iphone 4 is formatted in the month display to show the weeks as Monday thru Sunday as opposed to the traditional Sunday thru Saturday.  How do I get this back to normal?

  • Create SAP RFC iView with a structure as import parameter

    Hello All, I'm creating a SAP RFC iView from Portal SAP 7.4. I try call a RFC that have as import parameter a structure with various fields, but the portal recognizes the structure as string field, then I cannot fill the fields values, and when  I do

  • Clock and Date Reset

    I have Macbook Pro Mid 2010 running on Lion 10.7.4 Every time I run out of battery and automatically shutdown, I get a message that my date is set to before 2001 and causing applications to behave irradically when I boot up for the first time. I need

  • Can't Power on Intel XServe

    I'm unable to sucsesfully power up an intel XServe. After I plug back in the power it boots up, at least by looking at the front panel lights.  The fan kicks into high, the power light comes on, the first set of activity lights come on and the system

  • ResulSet problem

    I use one ResultSet rs and Statement st in order to Query a Table, I need to Update the records just retrieved, Can I use the same ResultSet and Statements variables?