Limiter Effect not effective

Hi
I applied a limiter effect to some clips after copying an adjusted one. Fine. They all have the adjustment. But the limit I applied (-5.5) doesn't seem to have much affect. The audio meter shows audio way above -5.5. And it's the exact same looking filter that worked so well in SoundTrack Pro.
Any ideas?
best
elmer

The bulk of the session should be backwards compatible, but some effects from newer releases will not load in earlier versions, as you've noted.  For compatible effects, you should see the correct parameter values, though the preset name used will not be displayed.  (Presets are a trigger to adjust parameter values, not stored as a parameter itself.)

Similar Messages

  • While "Invoice Cancelling- Accounting entry not effected in Trial balance"

    Dear All,
    Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
    Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
    Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
    I can able to see the Reversal Entry in Payables > Reports > View Accounting A
    Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
    @Have to Resolve this as soon as possilble, plz any one can lets guide me
    Reagrds,
    senthil

    Plz Update this asap.....

  • HT201320 This last week, I updated my iPhone with iOS6 and now my Yahoo Mail no longer works.  I've deleted and restored the account without fixing the problem.  The iOS update did not effect my iPad.  Anyone have a suggestion?

    This last week (of 17 Sep 12) I updated my iPhone 4 to iOS 6 and now my Yahoo mail does not work.  I keep getting a "Yahoo server busy" message.  This problem has not effected the update to my iPad 3 - it works fine.  In addition, I have deleted and added my Yahoo mail - same result.  Looking for ideas on repairing the link between iOS 6 and Yahoo.  Cheers

    Same here, albeit with a 3G and both a work Exchange account and personal Gmail are out of action.  Reentered my password on the Gmail to no avail.
    Unfortunately it seems that increased success has come too fast to Apple, it's starting to display Microsoft-like behaviors, e.g., releasing stuff and letting the customers serve as the beta / guinea pigs.

  • I had a second hard drive added to my Mac Pro.  How do I format it and not effect my orginal hard drive?

    I had a second hard drive added to my Mac Pro.  How do I format it and not effect my orginal hard drive?

    Just format it with Disk Utility as mentioned above.  Select the new disk on the list at the left.  Click the erase tab.  Specify Mac OS Extended (Journaled) if not already specified and give the disk a name of your choice.  Then click the erase button.
    That's the simplest way to format a disk with a single partition (volum). If you want to create multiple volume (partitions) then click the Partition tab instead of Erase.  You can then use then specify a number of volumes and size each volume by specifying its size or just dragging the slider in the bootm right of each partition.  Give each a name as before and again Mac OS Extended (Journaled).  Click Apply button to create the partitions.
    Since you appear to be new at this just "play" with the erase and partition settings so you can become comfortable with them.  So long as you have the new disk selected on the left you can't really hurt anything since it's a new disk and no data to loose.  You can always go back and erase it back to a single partition.

  • Changeover from DBM to SLM  not effecting

    Hi,
    I have created a depreciation key in transaction AFAMA with a changeover from DBM to SLM, provided when SLM depreciation is higher than DBM in 2 phases.  But when I run the depreciation for a asset, the changeover is not effecting rather it is calculating depreciation @ 50% across the life of the asset, instead of calculating the depreciation @ 25% DBM.

    Here we are not setting any changeover year, as per the req, it should compare the DBM with SLM, and whenever the SLM is higher than DBM dep, the changeover should become effective.
    Here how can we chk the changeover year?

  • Changes done in options are not effected - not able to change home page

    When I do changes in the tools-options menu the same is not effected in the next re-start of firefox. For example if I change my home page to a new web page, the same is not opening in the next restart of firefox. Not only this any change done in the options menu is not effected

    See:
    * http://kb.mozillazine.org/Preferences_not_saved
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols

  • Scratchy noise coming from top end of keyboard. Not effecting performance but very noisy and worrying! What is it? Is my computer seriously damaged? Is it easily fixed? Thanks for any help

    Scratchy noise coming from top end of keyboard. Not effecting performance but very noisy and worrying! What is it? Is my computer seriously damaged? Is it easily fixed? Thanks for any help

    It would be helpful if you were to identify the model of MBP you have. 
    The noise makers on a MBP are the fan(s), the HDD and the optical drive.  Can you locate the exact position where the noise is coming from?
    Ciao.

  • Smart style is not effecting in smartforms print preview

    Hi All,
      i have created my smart style with HELVE font style and i have created paragraph formats for my smart style. And i assigned one of my paragraph format to header data-> standard format.
    I have used this smart style in my smart form. But while doing print preview, my smart form output is not effected by the smart style which i have given. Output is displaying in the form of  my smart styles-> header data-> standard format's  font wise. Not effecting the paragraph formats what i have given in my smart form text editor.
    could anyone  reply me how to solve this issue.
    Thanks in Advance.

    You can do one last thing from your side to ensure you are absolutely right. Open your smartstyle and create a paragraph format under paragraph node, with name P1 (for example). Now in P1, keep the font as Helve and save and ACTIVATE.
    Go back to your smartform, open the concerned text node. Select the text in it and from the drop down select P1. If you have not assigned this smartstyle to your form in attribute node, in that case you need to assign this smartstyle to your form (or in the output option tab of the text node) to get the P1 in the drop down.
    Save and activate the smartform. And let us know if it solves your issue.
    Cheers,
    Anid

  • Titles are not visible, they show up on timeline as a grey box no text  does not effect other events or projects

    titles are not visible, they show up on timeline as a grey box no text  does not effect other events or projects. could this have something to do with motion

    Without seeing the timeline it sounds as if they've been off. Maybe you pressed the V or the role is switched off in the timeline index.

  • Deleting line itmes not effecting condition records -?

    Hi Experts
    In my order first time discounts are working fine.
    If  I add any new line items then also working fine.
    But when I deleted line itmes from the order the discount is not effecting as like previous. That means when ever I deleted line item my condtion records are not reading immediately according to my settings.
    If I cahange the quantity again for the remaining line item then its working fine.
    <b>(Hope experts understand this problem)</b>
    Do I need to configure some where to effect correctly my condition record or do we need to use any user exit for the cahnge in the order or deleting the line item in the order?
    Any thoughts  will be great help ful to me.
    Thanks
    Prasad

    Hi Prasad,
    firstly whenever you add a new line item the sytem will automatically calculate the pricing for it , now as you said it is not working when you delete the line item if i am correct then why dont you double click on your line item and go to Conditions tab and there you would find out a option called update , select the second option carry out new pricing and then i think it should give you the new correct pricing.
    Hope this helps
    Cheers

  • IPC requirement does not effect sales order

    Hi,
    I wrote a pricing requirement  in java extending RequirementAdapter.
    I uploaded it to the CRM system. When the requirement  is called, it writes messages to the VMC log and i can see the result of the requirement  : "true" or "false" .
    The problem is that the result of the requirement  does not effect the condition in the sales order - nothing happens no matter what the result value is.
    What should I do in order to get an error message in the sales order when the requirement returns false?
    Thanks
    Tomer

    Hi Michael,
    If the requirement will not trigger any error message by default according to the returned value, what excaly do I need to do in order to achieve that? Is there a BADI or user exist  where I can check the returned value and raise the message?
    Thanks,
    Tomer

  • Purchase order enhancement is not effective

    Hi Expert,
       I have a requirement about the purchase order. The requirement is that we must maintain the field collective no under the document header level. If there is no value exist , I can't print out the purchase order for the signature.
    I have looked for the enhancement MM06E005, but it's not effective.  I have looked for the enhancement MM06E005, but it's not effective. Which method is fit for my requirement, badi or enhancement? If using the badi, please tell me the badi name and its relevant method.
       Thanks.
      George shi

    Hello
    There are badis related to PO
    ME_ACTV_CANCEL_PO    BAdI for Activating the Cancel Function at Header Level 
    ME_BAPI_PR_CHANGE_01 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
    ME_BAPI_PR_CHANGE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Chan
    ME_BAPI_PR_CREATE_01 BAdI: Enjoy BAPIs for Purchase Requisitions             
    ME_BAPI_PR_CREATE_02 BAdI: Enjoy BAPIs for Purchase Requisitions (Method Crea
    ME_BSART_DET         Change document type for automatically generated POs    
    ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant       
    ME_CCP_DEL_DURATION  Calc. of Delivery Duration in CCP Process (Not in Standa
    ME_CHANGE_CHARACTER  Customer-Specific Characteristics for Product Allocation
    ME_CHDOC_ACTIVE      Activation of Further Change Document Updates           
    ME_CHECK_ALL_ITEMS   Run Through Items Again in the Event of Changes in EKKO 
    ME_CHECK_SOURCES     Additional Checks in Source Determination/Checking      
    ME_CIN_LEINRF2R      BADI for CIN India - Delivery charges                   
    ME_CIN_LEINRF2V      BADI for LEINRF03 excise_invoice_details                
    ME_CIN_MM06EFKO      Copy PO data for use by Country version India           
    ME_CIP_ALLOW_CHANGE  Configuration in Purchasing: Changeability Control      
    ME_DEFINE_CALCTYPE   Control of Pricing Type: Additional Fields              
    ME_GUI_PO_CUST       Customer's Own Screens in Enjoy Purchase Order          
    ME_HOLD_PO           Hold Enjoy Purchase Orders: Activation/Deactivation     
    ME_OUTBOUND_SAVED    Outbound message saved                                  
    ME_PO_SC_SRV         BAdI: Service Tab Page for Subcontracting               
    ME_PROCESS_COMP      Processing of Component Default Data at Time of GR: Cust
    ME_PROCESS_PO_CUST   Enhancements for Processing Enjoy Purchase Order: Custom
    ME_PROCESS_REQ_CUST  Enhancements for Processing Enjoy PReqs: Customer       
    ME_PURCHDOC_POSTED   Purchasing Document Posted                              
    ME_REQ_APPROVAL      Control of Buyer Approval After Changes to PReq Item    
    ME_REQ_HEADER_TEXT   Copy Header Text: Enjoy Purchase Requisition           
    ME_REQ_NEW_VERSION   Trigger new purchase requisition version               
    ME_REQ_OI_EXT        Commitment Update in the Case of External Requisitions 
    ME_REQ_POSTED        Purchase Requisition Posted                            
    ME_TAX_FROM_ADDRESS  Tax jurisdiction code taken from address               
    ME_TRIGGER_ATP       Triggers New ATP for Changes in EKKO, EKPO, EKPV       
    MEREP_RSLTHNDL2      SAP Mobile: BAdI definition for Result Handling        
    MEREP_RUNTM_LD2      SAP Mobile: BAdI definition for Runtime Loader         
    MESSAGES_RFW         Badi for error handling RFW                            
    METH_FOBU_CONNECTOR  Appl. Specific Functions for Formula Builder Method Impl
    METH_FOEV_CONNECTOR  Appl. Spec. Functions for FB Method Implementations    
    Thanks
    Anirudh Saini

  • Binding not effected until a version is created !

    Hi all,
              I have a problem that whenever I modify the binding in the definition of an active workflow, the binding are not effected unless I create a new version in the dev client.
    In the testing client (in the same system), there were workflows which are still in the status 'in process' or 'ready'. but I dont need those workflows anymore.
    is it necessary to delete all these pending workflows in all clients for the new binding to take effect ? I'm creating n number of versions in dev client unnecessarily.
    whether I'm missing any config settings ?
    please avoid copy past from 'sap help'.
    regards,
    Sudhahar R.

    Hi Anuj,
                If SWU_OBUF is working for you, it's fine :-). but please understand that that I've tried all the possibilities of activating the modified workflow definition. I still end up running the same old workflow prior to the modification, and nothing got changed. thats why I tried deleting all the running instances expecting that it may cause mismatch.but it didnt help.
    the new modifications are effected "ONLY WHEN I CREATE NEW VERSION"
    Am I clear now ?
    did anybody encountered this problem ?
    Thanks & Regards
    Sudhahar R

  • Excise jv through f-02 but effect not coming in j2iun

    excise jv through f-02 but effect not coming in j2iun

    Hello,
    Excise JV should routed through J1IH
    Regards
    Mani

  • Index not effecting -- Urgent

    Dear All,
    I am doing calculation for incentives. The package is generated by oracle itself.
    But it is taking very very long time in one instance and in another instance it takes very short time.
    When I looked at plan I found that the sql queries are not using the indexes at all. Even these tables are seeded and indexes are also seeded.
    Why the indexes are not effecting? I have rebuilt the indexes also for this schema also still not working.
    Thanks,
    Krunal

    user10717959 wrote:
    Dear All,
    I am doing calculation for incentives. The package is generated by oracle itself.
    But it is taking very very long time in one instance and in another instance it takes very short time.
    When I looked at plan I found that the sql queries are not using the indexes at all. Even these tables are seeded and indexes are also seeded.
    Why the indexes are not effecting? I have rebuilt the indexes also for this schema also still not working.And who did tell you that rebuilding of index would make it usable for the query?
    Your column is containing some null values or are you using any function or transformation on the column? If yes, this can be one of the possible reasons that the index is not being used even when being forced. What's "seeding the table and index" BTW?
    What's your db version (4 digits) and o/s ? Post here the query plan ( use the code tag for posting it. See the FAQ on the top right corner of this page for knowing more about it) .
    HTH
    Aman....

Maybe you are looking for

  • ITunes error when typing out the letters of the band to search

    I've been using iTunes since it debuted and I've always would not use the search function to find what band I wanted to hear but rather just type out the first 1-3 letters and it would take me there faster. This new iTunes update has screwed that up.

  • Which table/view stores the Driver values for each project

    Hi, I want to report on projects and drivers and the rating (Extreme, Moderate, low etc.) that have been assigned to each project.  I cannot seem to local the correct table/view.  I found the driver table and analysis tables but not one that has a pr

  • How to connect top level domain database to subdomains

    Created subdomains for the top level domains. Need to learn how can we connect centralized database in the top level domain with the subdomains code in coldfusion.

  • Sending duplicate text messages

    My phone is sending duplicate text messages whenever I send to my contacts.  How do I stop this? I've noticed this on my RAZR Maxx and now my HTC One M8. 

  • How to upgrade to quick time pro in OS X version 10.9.5

    Hi, I purchased the activation code for the quick time 7 pro but when I enter it in the registration box nothing happens. I'm being redirected to the apple store web page. I have a mac book pro os x version 10.9.5 Thank you for your help, Emil