Limiter effect not limiting

Hi
Example: When I apply a Limiter effect with a -5.5 limit to a clip, the audio meter still shows it rising above that. What's up with this thing, I've applied it to a number of clips, it doesn't seem to function with the precision that a limiter filter that looked exactly the same in STP did. It seems to have some effect but my ears and eyes say it's not doing it's job.
Suggestions?
best,
elmer

The bulk of the session should be backwards compatible, but some effects from newer releases will not load in earlier versions, as you've noted. For compatible effects, you should see the correct parameter values, though the preset name used will not be displayed. (Presets are a trigger to adjust parameter values, not stored as a parameter itself.)

Similar Messages

Excise jv through f-02 but effect not coming in j2iun

excise jv through f-02 but effect not coming in j2iun

Hello,
Excise JV should routed through J1IH
Regards
Mani

Lighting Effect not work in CS6*

Why Filter/ Render/ Lighting Effect not work in CS6?
It's not work only in CS6 Beta or in anything else :-/. It's Useful with me

A bit more information would be helpful. What is happening on your system when you go to lighting effects?
What system are you running on? What video card are you using? Are you using the most recent driver?
Do check our system FAQ as GPU is requried for lignting effects to work properly.
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Pattie

After Effects not working in Mavericks

Is anyone having issues with Adobe After Effects not working in Maveriks? Premeire, Photoshop, Audition all work, but not AE. No update from Adobe available.

This update is ONLY FOR MAVERICKS. You can't update through Creative Cloud, to prevent users of other operating systems from installing it.

In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

In a prior photoshop cc version there were filters that could used as a effect(not a layer) that are NOT available now? why ?

Ok no one has been able to help me so far this is it. I NEVER had these problems with photoshop CS6 extended edition!
The best i can do to describe the dissappearing filters( from iteratrions of Photoshop CC for the last year to now) and pattern overlays were called marble, stones and concretes. where can aI find a list of pattern overlays?
will it do any good to repost to all on this forum?

Ken Burns Effects not rendering

I am having isssues with Ken Burns effects not rendering. I have no iMovie 3rd-party plug-ins. I select the timing of the effect and hit apply and the photo clip hangs and will not render. Anyone else experiencing the same issue or have a fix??
Thank you.

I have discovered the issue. It wasn't 3rd party plug-ins, but a Quicktime plug-in entitled "QuartzComposer.component". After removing, Ken Burns effects rendered as planned.

After Effects: not enough memory to create COR_BibAlloc

After Effects: not enough memory to create COR_BibAlloc
(64k requested, 388412K available)
My comp is a 1280x720 30 second spot. Not too complex
of an animation with not that many layers (I know that
sounds vague). I've purged the comp and even tried the
"Secret" option in preferences to purge every 3 frames.
Keep getting this error message when I render. I am
running an Intel Xeon CPU 2.8ghz dual with 2.75 gb of
RAM with AE 7
Thanks

Mmh, yes, indeed that very likely would be to blame on Quicktime. You probably had better luck with CS3 which handles H.264 natively via MediaCore. My guess that it is simply some odd allocation of the compression which could be fixed, probably even a simple export from QT Pro to the same format. Do the files correctly play in QT player? As an alternative to QT Pro I recommend attempting to run it thru SUPER©, which is free. Perhaps this will repair the streams and prevent the errors. If not, you will have to shelve out some money or find otehr ways of converting your footage, I'm afraid.
Mylenium

Limiter Effect not effective

Hi
I applied a limiter effect to some clips after copying an adjusted one. Fine. They all have the adjustment. But the limit I applied (-5.5) doesn't seem to have much affect. The audio meter shows audio way above -5.5. And it's the exact same looking filter that worked so well in SoundTrack Pro.
Any ideas?
best
elmer

The bulk of the session should be backwards compatible, but some effects from newer releases will not load in earlier versions, as you've noted. For compatible effects, you should see the correct parameter values, though the preset name used will not be displayed. (Presets are a trigger to adjust parameter values, not stored as a parameter itself.)

Limit effect not limiting

I open an audio clip in STP, add a limiter, make adjusts, save, then when I open it in FCP it doesn't seem like there's any difference. So I double click on the clip it opens in STP but the Limiter is no longer there. What am I doing wrong? Shouldn't there be a limited effect active and aren't saved files changed to be a .stap file?

My bad.
Mac Pro
2.66 quad core
7300 GT
3 gigs ram
250 gb hard drive (70 used)
250 gb external glyph hard drive - connected via FW 800 cable
It's weird since both the 3-way color corrector and matte are both bold which from my understanding are effects that can be rendered real time.

AlphaFromTo effect not holding the "to" state

Using Captivate 6 on Mac OS X. I'm using the AlphaFromTo effect to change the alpha from 100% down to 25% in the space of 1 second. The transition does occur, however as soon as the 1 second is over the image immediately returns to 100% alpha for the rest of the slide. Is that the way AlphaFromTo is supposed to work?
The "Alpha" and the "Set Alpha" effects don't seem to do anything at all.
Would appreciate any ideas!

Very frustrated!
"We are expecting this to be fixed soon." in 2012
I was having a lot of issues with effects in captivate 6 and 7. I just downloaded the Captivate 8 trial and I am surprised that something as simple as controlling/setting/animating the alpha channel of shapes is not working. The alpha transitions that do "work" are broken and flicker, making the slides look really really bad. I would like to have custom animations and popups for my eLearning modules, and this does not seem possible with Captivate. I cannot trigger animations on objects that are off the stage, and I cannot control their alpha or visibility. This seems like a very basic feature. I am disappointed. Am I missing something, or is the program really this limited?

Falsh effects not working if image width greater than 2782 px

I am trying to apply a filter (blur or desaturare) to a
movieclip, but i noticed that it does not work if the image inside
the movieclip is larger than 2782 px (width). Can anyone explain me
why? How can I solve this?
thaks
ps - I am using Flash Pro CS3
Diogo

Ze_Povinho wrote:
> I am trying to apply a filter (blur or desaturare) to a
movieclip, but i
> noticed that it does not work if the image inside the
movieclip is larger than
> 2782 px (width). Can anyone explain me why? How can I
solve this?
That's flash functionality and limits set by Macromedia/Adobe
to
to prevent memory problems. The filter is turned off if the
image exceeds
the limit of 2880 pixels.
But, not too worry, the limit is removed or increased in the
upcoming
Flash CS4 and Player 10.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Effects not working? "Could not complete your request because of a program error?"

Hey guys&gals - I have always had this problem when working in RGB/CYMK modes - can anyone help me with that?
More more importantly, now I am getting in in Grayscale mode as of this morning.
I run Photoshop 6 V 13.1.2 x64 and just updated it this AM.
Effects are crucial for my job, so I need this fixed asap!!
I have tried the ctrl, alt, shift start up to no avail. Restarted, shutdown my PC as well.
Please advise!
Thanks,
blaqgranitelaser

Found the places I was supposed to - now what? Photoshop isn't crashing... doesn't give me any info other than a box saying "Could not complete your request because of a program error." And I have no choice but to click OK. This only happens when I try to use the layer effects in any color mode. Originally it was only in RGB/CMYK but now also happens in Grayscale.
I'm not technologically savvy - I know what programs I use, but that is all.

OAM File and Scroll effects Not AutoPlaying in Muse

Hello
I placed an OAM file in muse which contained a slideshow ( slideshow is a basic slideshow provided by muse ) and i noticed that it doesn't work when i activate the edge animate scroll effects. The autoplay function does not work, nor does the "advance 1 second every pixel" function. This is a big one, i really need this effect to work. Otherwise edge animate is pretty useless without it. Somebody please help. Thanks

Hi David,
I see the issue you're having on your website. I'm having trouble reproducing it myself. Can you please send your file so I can take a closer look at what is happening? You can send it to [email protected] with the subject attn:Dana and include a link to this thread.
Thanks,
Dana

Adobe after effects not responding, ever!

I have been having this issue for a long time and cant seem to find a solution, maybe I am wording it wrong, i dont know. It worked just fine for about a year, but now basically every single time I open adobe after effects cs5 it works for about 1-2 minutes and then freezes, the typical "this program is not responding" message shows up with no error code. it doesnt matter what I do or what I click on, it happens every single time! Its really frusterating! my computer has 32 gb, I'm sure that is plenty of RAM. I have done all the updates on the adobe website (including the quicktime updates) I saw OpenGL mentioned many times but I cant seem to find anything like that on my computer so I dont know if that is a problem or not. I noticed on the sytem requirements list (I have a windows 7 professional) they said that the processor must be Intel® Core™2 Duo or AMD Phenom® and my computer has intel (R) Xeon(R) cpu 5160 @ 3.00GHZ 3.00 ghz (2 processors) I honestly have no idea if that would be a problem. If anyone else has had this issue I would love to hear how you fixed it, I have tried so many things chances are I already tried it but still.

okay sorry it took so long, this is my dads old computer so I had to keep calling him haha. so I literally anwered everything, I really want to find a solution!
1) adobe after effects cs5 with the 10.0.2 update
2) on the adobe website it looks like this is the most recent update for cs5 on windows
3) windows 7 professional 64 bit opetrating system
4) intel(R) Xeon(R) CPU, 2 processors, 32 GB of ram, NVIDIA Quadro FX 5800, 2 disk drives, no external drives
5) NVIDIA Quadro FX 5800
I couldnt seem to find anything about CUDA , I googled it but couldnt find anything to tell me how to find out this info, if you know please let me know
6) nvidia quadro fx 5800
7) source footage is microsoft video AVI, with quicktime
8) it was just the typical "this program is not responding, please wait for the program to respond" I let it run a couple times to see if it ever responded but it never did. but the last couple of times I opened AE it just freezes and no message shows up.
9) it doesnt matter what I do, even if I just open it and let it sit there it still freezes up.
10) it worked for about a year, I dont beleive anything major has changed on my computer, but I have been stuggling with this problem so long I wouldnt be able to remember anyways.
11) yes quicktime is installed and updated, it is version 7.7.4
12) I usually dont have anything else running other than AE
13) I asked my dad about this and he said he didnt think so so I assume that means no.
14) yes I have openGL enabled
15) within the first two minutes of opening AE doesnt matter if I am editing, ram previewing, or nothing.
16) I have tried checking and unchecking the "render multiple frames simultaneously multiprocessing" and the problem occurs either way, but right now I am using it.
17) no use of ray traced 3d rendering
18) not an out put problem
19) exact sequence of steps? well... I click on adobe after effects, it opens kinda slower than it used to, then I usually will his ram preview because then I can see when it stops exactly, but I also have tried opening it and just looked at settings or preferences or what not and it would freeze then, or I will click on a diffrent compositions and it would freeze. pretty much whatever steps I take it always happens.

Timewarp effect not applied when rendered from Media encoder CC

The timewarp effect (enabled using console veiw in PPRO CC) does nothing to footage when rendered through Media encoder...
It does however render when not sending it to the queue, and rendering straight from PPRO.

Fair enough,
Just hoping to raise attention of this...as I believe this should be a normal supported feature of PP as it once was back in CS3 days.....
Normal frame blending interpolation doesn't really cut it, and round tripping to AE is overkill for something already built into PPro....
But at least it's in there in some form

Limiter effect not limiting

Similar Messages

Maybe you are looking for