Limiting access via fingerprints

Is it possible, or is there an app that enables me to grant access to my iphone 5s via fingerprints to a limited access profile? i.e if I lend my kids my phone, but I dont want them getting access to data/itunes? or I lwnd my phone to a colleague but dont want him accessing my photos?
tia
wayno

Hey Wayno,
I'd take a look into Restrictions, and see if any of its features work for you:
You can restrict access to the following applications and features on the device:
Safari
Camera (also disables FaceTime)
FaceTime
iTunes Store
iBooks Store2
Installing apps
Deleting apps
In-App Purchases
Siri
AirDrop
You can prevent access to specific content types:
Ratings (select the country in the ratings section to automatically apply the appropriate content ratings for that region)
Music and podcasts
Movies
TV shows
Books2
Apps
Siri
websites
You can also adjust the time necessary before a password is required to purchase content.
You can prevent changes to privacy settings, including:
Location Services
Contacts
Calendars
Reminders
Photos
Bluetooth sharing
Microphone
Twitter
Facebook
Advertising
You can prevent changes to the following settings and accounts:
Accounts3
Find My Friends4
Cellular data use5
Background app refresh
Volume limit
You can restrict features within Game Center:
Multiplayer games
Adding friends
via: iOS: Understanding Restrictions (parental controls)
https://support.apple.com/kb/HT4213
Have a good one,
Delgadoh

Similar Messages

TS2972 I assume my Apple TV should allow me to view all events,albums and slideshows but It only allows four events to display on my TV. I'm using a Optus mini Wi Fi for my home network. Could this be the reason for limited access via my iMac computer? Ch

I assume my Apple TV should allow me to view all events, albums and slideshows in my iPhotos app but it only allows four events and four albums to display on my television. I'm using a Optus mini Wi Fi for my home network. Could this be the reason for limited access via my iMac computer?
Chris

No, I have not chosen photos to share as I assumed that the Apple TV would access all photos and music that are stored on my iMac.
Thanks for your advice. I will check it out.
Chris

How to set up full access and limited access wireless networks to laptops

Dear Apple,
I just received my Apple 1 TB Time Capsule. Can someone please help me with a network configuration I want to set up?
I have a cable modem, and, three computers: a G4 iMAC (system 10.5.5), an Apple MacBook (system 10.5.5), and, a PC laptop.
The Time Capsule is connect directly to the cable modem.
Regarding the computers:
(1) I want the G4 iMAC to connect directly, via an Ethernet cable, to the Time Capsule, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature, and, with allowed access to my HP inkjet printer (class 6110);
(2) I also want the MacBook laptop to wirelessly link to the Time Capsule via the Airport utility on the laptop, and, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature (using WPA/WPA2 security, and, without the network name visible to third parties), and, WITH allowed access to my HP inkjet printer (class 6110);
(3) I want the PC laptop to wirelessly link to the Time Capsule (using WEP security), but WITHOUT ACCESS to the Time Machine, WITHOUT access to the back-ups on the iMAC, WITHOUT access to the back-ups on the MacBook, and, WITHOUT access to the inkjet printer --- I only want the PC to use the Time Capsule as a WIRELESS ROUTER so that the PC laptop can access the internet.
(4) And, finally, I want to specify (Time-Capsule/Time-Machine/server ) access ONLY to the iMAC and the MacBook, so that others cannot gain any access.
I specifically need help to set up and configure the Time Capsule so that the PC laptop, as stated above, should have limited access to the Time Capsule --- namely, only to access the internet, and, not even be aware of stored data on the Time Capsule, not even be aware of the inkjet printer, and, not even see my WPA network name when the PC scans for wireless devices.
I also want the iMAC and the MacBook to have access to each other’s data stored on the Time Capsule (like a common server).
I have an old D-Link DI-624 wireless router that I used before buying the Time Capsule, which is available, if needed. Hopefully, I can configure the Time Capsule so that I would not need the old D-Link.
Thank you in advance,
David.

The basic method for remote access is not changed.
http://gigaom.com/apple/access-your-time-capsule-over-the-internet/
You have a few issues.
The really big one.. the school firewall should not let you connect to home.
Check the IT admin at your school but if they allow anything but a few protocols like http and https through, they are not doing their job. You cannot afford in a large network to have every Tom Dick and Harry access any open device.. that can introduce viruses and trojans into the network behind the firewall.
The general method for remote access on large networks is vpn and the TC offers no vpn connection.. just AFP.
If you intend using 3G wireless stick or the like then you can get access.
The next issue is static public IP or how to find the TC.. you need some way to find the IP if your ISP does not offer static ip, and the tc has no dyndns client. Since Apple shut down new users for mobileme and will close that service there is no method to find the TC IP without owning your own domain. You would be better placing the TC in bridge behind a router that does offer dyndns and port forward AFP (TCP 548) to it.

Server Admin not connecting to Leopard Server when accessing via VPN

Hi everyone,
Recently, as the title suggests, Server Admin (or Server Preferences, for that matter) would not connect to my remote server via VPN. I'm quite sure that the server is working nicely, as the users (both of them lovely young ladies with considerable charms, which makes on-site support quite interesting, if distracting) didn't call me to complain, and I can login via SSH with no problems.
The server is a Mac Mini, connected to an Airport Extreme (gigabit N), which in turn connects to our ADSL modem, if that helps any.
Now, I did tinker around a bit with the settings before this happened, so I think it's probably my fault (well, I started my "career" of administering this server a week ago, what do you expect), so I suppose I may have inadvertently limited access to a service required for Server Admin and Server Preferences to function.
If anyone could tell me which services are absolutely necessary for Server Admin to function, or at least where to start looking, I'd be immensely grateful. I didn't yet go on site to try and wrestle the whole thing from there, as the travel costs are non-trivial, so I'd rather do it remotely, if at all possible.

This is exactly the difficulty I am having with a 10.5.4 Intel xserve. I have established a VPN connection that connects me to my business LAN, and I know it has carried out the connection because there are a number of things I can access properly that are not available on the public internet. For instance, my LOM ports are restricted to my business LAN, and when I connect to the server via VPN I can access teh LOM ports and using server monitor. However, when I try to use Server Admin, nothing works. It won't connect. I too am confused. All traffic to the xserve is allowed via the business LAN. I thought all traffic was supposed to be routed to the VPN server when connected via a VPN. If this is the case, shouldn't Server Admin work? When I go on site and connect my computer directly to the business LAN, I have no difficulty using Server Admin.

Set up TM w/Limited Access to one laptop & Full Access to another?

Dear Apple,
I just received my Apple 1 TB Time Capsule. Can someone please help me with a network configuration I want to set up?
I have a cable modem, and, three computers: a G4 iMAC (system 10.5.5), an Apple MacBook (system 10.5.5), and, a PC laptop.
The Time Capsule is connect directly to the cable modem.
Regarding the computers:
(1) I want the G4 iMAC to connect directly, via an Ethernet cable, to the Time Capsule, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature, and, with allowed access to my HP inkjet printer (class 6110);
(2) I also want the MacBook laptop to wirelessly link to the Time Capsule via the Airport utility on the laptop, and, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature (using WPA/WPA2 security, and, without the network name visible to third parties), and, WITH allowed access to my HP inkjet printer (class 6110);
(3) I want the PC laptop to wirelessly link to the Time Capsule (using WEP security), but WITHOUT ACCESS to the Time Machine, WITHOUT access to the back-ups on the iMAC, WITHOUT access to the back-ups on the MacBook, and, WITHOUT access to the inkjet printer --- I only want the PC to use the Time Capsule as a WIRELESS ROUTER so that the PC laptop can access the internet.
(4) And, finally, I want to specify (Time-Capsule/Time-Machine/server ) access ONLY to the iMAC and the MacBook, so that others cannot gain any access.
I specifically need help to set up and configure the Time Capsule so that the PC laptop, as stated above, should have limited access to the Time Capsule --- namely, only to access the internet, and, not even be aware of stored data on the Time Capsule, not even be aware of the inkjet printer, and, not even see my WPA network name when the PC scans for wireless devices.
I also want the iMAC and the MacBook to have access to each other’s data stored on the Time Capsule (like a common server).
I have an old D-Link DI-624 wireless router that I used before buying the Time Capsule, which is available, if needed. Hopefully, I can configure the Time Capsule so that I would not need the old D-Link.
Thank you in advance,
David.

Not a problem. I just wanted to point out that you won't get any "official" answers from Apple on this board. It is all user to user and we only know what we know and some of the time it is conjecture on how to fix a problem if we've never seen it before. I try to point out when I'm guessing, but I don't always remember to rephrase my statements.
I'm not sure how to set up the Time Machine, but look for an option to only serve out files via AFP (Apple Filing Protocol) only. Turn off SMB sharing, if possible. The PC won't be able to understand AFP--it communicates via SMB (Server Message Block). I would think you should be able to set up
If the PC can use WPA or WPA2, use that instead of WEP. There is no way to set up special passwords for individual users on a wireless network. It is all or nothing. Now, the wireless password could be different than the password needed to access the files, I think. So, you could set up a simple WPA password for wireless, but set up user accounts with strong passwords for the file server. Again, I don't have Time Capsule, so I don't know how to set it up. Hopefully, I've put enough keywords in for you to look through the configuration options and get it set up.
As long as this thread stays open and unanswered, more people might look in and have a more specific answer for you.

Limited access group for some switches only

Hi ,
We have around 80 x cisco 3750 switches using AAA Windows Radius server and AD as authentication for IT users login.
How do we setup a limited access group which allow them to access some switches ONLY?
Any advice is very much appreciated.
Thanks
Qle

Well its Prod (you have a dashboard called testdashboard in Prod?) anyway - someone might have changed the presentation catalogue permissions on the dashboard. All it takes is for someone to remove 'Everyone' or change a Group permission and it could effect.
If they changed the Parent folder and cascaded the changes down this might cause this issue.
You have a folder called 'Shared' - check the groups that the people are in have 'Traverse' , 'Read' or higher. Also chek dashboard permissions themselves from Settings-Manage Interactive Dashboards - Check the Padlock icon.
Are you users getting allocated into the correct WEBGROUPS ? Is this assisngment done explicitly in the webcat or via an RPD Variable ? Have you checked NQQueryl.log to make sure any init blocks are completing successfully?
Either persmissions have changed or group memebership is not completing.
Good luck
Alastair

My Safe : Password Access following fingerprint scan

I set up My Safe and when coming back to it (accessing it via fingerprint scan) I am being asked for a password. I do not remember setting up a password and when I put in what I would expect the password to be, it looks like it's going to work and then I get the message Code 2 - system cannot find file specified. I am very frustrated....can anyone offer any help/advice.

I agree with markus, try to reinstall the application and reconfigure your fingerprint. But dont forget to set a password, because this program needs a additional password due to security reasons.
And by the way, this password is a backup for you if something with your fingerprintsoftware is wrong.
Greets

Limited Access not working as intended

In SharePoint 2010 when Limited Access (fine grain permissions) is enabled you could assign permissions for a user on a list item or list etc. SharePoint would then grant Limited Access permissions for that same user on parent scopes. This allowed the user
to have access to shared resources such as navigation and master pages allowing him to traverse to the target item or list without having access to any other content.
I can't seem to replicate this in SharePoint 2013. I have the following features:
SharePoint Server Publishing Infrastructure: Enabled (site collection feature)
Limited-access user permission lockdown mode: Disabled (site collection feature)
SharePoint Server Publishing: Enabled on all sites (Site feature)
If I assign permission to a user for a list. The user can view that list via URL, but cannot view the parent webs/sites. Cannot view the navigation (site scope).
If anyone has any idea as to why Limited Access isn't working as I hoped it would, I would be very appreciative of any help!
Regards,
Damien

Since Publishing is enabled, the pages are stored in the Pages library and CSS etc is stored in the Style library. Make sure that users have access to those locations. If they don't then having limited access won't allow viewing the default
page and navigation. I suspect in 2010 you were using sites where the default page was stored directly in the site root folder rather than in a library. Changes in 2013 moved away from that design. So limited access normally won't allow display
of the root site unless you also give users access to the page and any additional required material.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

E4200v2: Local Management Access via Wireless *ALWAYS* Enabled

I just found a slightly unsettling bug in the E4200v2 (running the latest firmware 2.0.36 build 126507).
Administration > Local Management Access > Access via Wireless ... set to DISABLED.
HOWEVER, when I attempted to access the web interface on a handy iPAD I had absolutely no problem getting through to the web interface (after providing username and passsword).
Limiting access to wired clients seems like a simple a prudent measure ... which is why this option is there for the paranoid among us.
This seems like a black-and-white bug. Comments welcome. Fix in the next firmware revisio even more welcome.

It was mentioned in another thread that disabling wireless management does indeed disable http access over port 80. However, if you're using https access--which uses port 443, that access is not blocked. So for anyone who wants to disable wireless management access, you need to enable management access via http only, and then disable the wireless access. That combination will indeed work.
I have confirmed this on my own router and can now only manage via wired connections over http.
Strange bug/oversight!

Web-UI error message "Access via 'NULL' object reference not possible"

I need some help, I'm not a Basis person but I need to get this connection problem resolve.
This problem is in our DEV ICWeb system. After logging in to Web-UI, I got a error message "Access via 'NULL' object reference not possible". We have 3 clients (100, 220, & 310) in DEV and all 3 clients are giving me the same error message.
From the help.sap.com, I found this topic http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
but in the document it asked to go to SM59 to check the ESH_APPL_WS_TEMPLATEENGINE destination. But we don't have that destination setup in all our systems.
Here is the complete error message:
Error when processing your request
What has happened?
The URL http://crm-dev.staff.copa:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
■The following error text was processed in the system CD1 : Access via 'NULL' object reference not possible.
■The error occurred on the application server CRM-DEV_CD1_00 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: EH_TRIGGER_NAVIGATION of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: SET_WORKAREA_CONTENT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: PROCESS_NAV_QUEUE of program CL_BSP_WD_VIEW_MANAGER========CP
Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
What can I do?
■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CD1 in transaction ST22.
■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server CRM-DEV_CD1_00 in transaction SM21.

Hi Michael,
Refer to the link below and check the procedure.
http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
Regards,
Arjun

I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in

I have an icloud account which I can access via the web but when I go to systems preferences and click on the icloud it sends me to the mobileme closed site?? How do I get it to go to my icloud log in?

You're saying that when you click on the iCloud preference pane button it sends you to the defunct MMe
rather than giving you this?
Is your profile up to date, i.e. are your running 10.7.5? Make sure you click on the iCloud button and not the MMe button.
OT

The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.

Hi all ,
Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
But im getting below error, even i removed the select query still same error is occuring.
Error when processing your request
What has happened?
The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
Note
The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP

Thanks Rama,
Acutally i accidentally commented the lo_nd_student = wd_context ....etc
this line was commented .
i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
my table node is student having attributes as name , city and number , all are of type strings.
now i created one custom table zstudent having ID - char of length 10,
name of type string
city of type string
num of type string
i have inserted records
but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
im getting same above error.

Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
Thanks.
Solved!
Go to Solution.

This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants. Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected. When no connection is detected you could have the program run in an idle state. The attached screenshot shows a general way to do this. Have a good evening!
-Bob
-Bob
Attachments:
idle state.JPG ‏45 KB

Getting error "Access via null" when running the web dynpro application

Hi experts,
I am getting the below error while executing my web dynpro application
500 SAP Internal Server Error
ERROR: Access via 'NULL' object reference not possible. (termination: RABAX_STATE)
I am getting the error only when I am calling a method create manufacturer from my web dynpro program. If i comment this code my application works fine
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
    gi_manufacturer = ls_manufacturer
IMPORTING
    lv_message      = lv_status
i have created a attribute mo_ch_instance of type YSRM70CL_CH_SW_MD where YSRM70CL_CH_SW_MD is the class which has the create_manufacturer method that i am using in my code.
Kindly let me know whats the issue.
Regards,
Vinod

Hi,
if   wd_this->mo_ch_instance is not initial.
CALL METHOD wd_this->mo_ch_instance->create_manufacturer
EXPORTING
gi_manufacturer = ls_manufacturer
IMPORTING
lv_message = lv_status
endif.
Check wether you have created the object for that class r not.
Regards,
Lekha.

Access via 'NULL' object reference not possible   - GET_RANGE_TABLE_OF_SEL_

Hi Guru's,
   i am new for WebDynpro programming.I am trying to use select-options tutorial.
System showing select options and table binding on screen when i test the application.
I have using search button to get the value which user will i/p.for that onaction method created, i have writen the code to get the values which user will input.
Method given below is of componentcontroler
method wddoinit .
data: lt_range_table type ref to data,
        rt_range_table type ref to data,
        read_only type abap_bool,
        lt_range_table1 type ref to data.
data: lr_componentcontroller type ref to ig_componentcontroller,
        l_ref_cmp_usage type ref to if_wd_component_usage.
create the used component
l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
    l_ref_cmp_usage->create_component( ).
endif.
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
wd_this->m_handler->set_global_options(
                          i_display_btn_cancel = abap_false
                          i_display_btn_check   = abap_false
                          i_display_btn_reset   = abap_false
                          i_display_btn_execute = abap_false ).
lt_range_table = wd_this->m_handler->create_range_table( i_typename = 'S_CARR_ID' ).
wd_this->m_handler->add_selection_field( i_id = 'CARRID'
it_result = lt_range_table i_read_only = read_only ).
call method wd_this->m_handler->add_horizontal_divider
    exporting
      i_id = 'LINE'.
endmethod.
Method given below is of VIEW.
method ONACTIONSEARCH .
DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
                       WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
endmethod.
while executing appln. error is trigger on line given below
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Err: The following error text was processed in the system BCD : Access via 'NULL' object reference not possible.
please help me out on this issue.
Thanks and Regards
Vinayak Sapkal

hi ,
The attribute M_HANDLER is an attirbute of component controller (as told by your post) and so you cannot access it as you have done it.
You will have to access it as .
WD_COMP_CONTROLLER->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD(I_ID = 'S_CARR_ID' ).
Try doing it.
Or else , if you have created a similar attribute in your view itself , then it is "INITIAL" and hence you are getting the dump.
You will have to assign the view attribute "M_HANDLER" with the value of your component controller attribute "M_HANDLER" ,because all the initializations are done in WDDOINIT of comp controller and on component controller atribute "M_HANDLER".
Thanks,
aditya.

Limiting access via fingerprints

Similar Messages

Maybe you are looking for