Linckage between Bussines Partner and Client

Hi SAP Gurus...
I'm upgrading SAP from version 4.6 to ECC 6.0
In SAP 4.6, I was able to "link" the master data of Client when I was creating one Bussines Partner.
In ECC 6.0, when I tryed to do that, I found an error. I found later that I forgot to check the linckage between the BP and Client in SPRO.
Now that I have done that, I can already move the master data from client to the BP. The only problemn that I'm facing is that, when I'm creating a new client, it creates automatically a new BP, and we dont want that.
Can anybody help me?
Thanks in advance.

Check this for your settings:
IMG: > Cross-Application Components >>> Customer/Vendor Integration (client = customer?) >>>
Business Partner Settings >>> Settings for Customer Integration
and
IMG: > Cross-Application Components >>> Master Data Synchronization >>>> Synchronization Control
Regards
Hein

Similar Messages

Difference between Business Partner and Customer in ISU?

Is there any difference between business partner and customer in ISU?
if yes then wht?

Hi,
Yes Business Partner is a broad term used in ISU for various roles. A business Partner can be a Customer for company, an employee or even a vendor.
It depends on what role business partner has been given. Initially by default all Business Partners are assigned a default role "Business Partner (Gen.)". Later it can be changed to any role like Employee, Vendor, etc.
Business Partner with role "Contract Partner" is normally the end Customer which I believe you are referring to.
For more info on Business Partner, please check below link:
[Business Partner Master Data|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABP/CABP.pdf]
Thanks.
Ravi

Difference between Business Partner and Customer Master repository

What is the difference between Business Partner and Customer Master repository ?
Is the Business Partner repository to be used in case CRM is also in landscape ? or Customer master repository is good enough ?
Sandesh

Hi,
If the landscape has both CRM and SAP ECC a business partner repository model should be good.
If it has ECC alone.a Customer Repository is needed.
But when there are many legacy systems which also contains master data fields, the standard business repository provided by SAP wont provide a good solution as it wont cover the legacy master fields..In this case its better to go for a customized repository and you can use the standard repository as a reference.
Thanks

Mapping between Business Partner and BDoc type BUPA_MAIN

Hi Experts,
When creating a business partner system automatically generates BUPA_MAIN as its BDoc type.
Can some one please let me know the mapping between business partner and the BDoc type BUPA_MAIN.
I mean to say how BUPA_MAIN(BDoc type) is getting triggered while creating business partner.
Maximum points will be rewarded.
Thanks in advance
Nadh.R

Hi Nadh,
This is done in SMOEAC transaction where you assign the subscription and replication objects.
You go to SMOEAC and select the object type as Subscription and click on display icon and it displays the subscription ALL Business Partners and when you click on this or expand you find publication and when you expand this you find replication objects and against this you find the BUPA_MAIN bdoc type.
Hope this helps and if so please reward points.
Thanks
Srini

Difference between system refresh and client refresh

Hi all,
I have one dout what is the difference between system refresh and client refresh,kindly tell me the answer?
BR
krishnamurthy.

Hi,
Client is part of a system.
Client copy :Can happen within a single system(local client copy) or to other system (i.e b/w systems) .
Here we have some profiles to extract the data depending on the need.
System Copy: We are copying the entire system to other system.we get the entire systems data (DB) .
In both the cases we have to make sure that they are on same application component and are on same patch level.
Thanks!!
Edited by: Vani n on Jun 27, 2008 2:45 PM

2008r2 RDS Copy / Paste issue between remote app and client

I am running a 2008r2 Remote App server with Win7/XP(sp3) clients. All devices are up to date on current service packs and patches. I can open RDWeb applications and paste between other RDWeb applications, but cannot paste from RDWeb to local
applications. I can also paste between various locally running applications, but not from a local application to an RDWeb application. Each machine is maintaining it's own paste buffer, but not exchanging between the server and local machine.
I have tried using different applications on both local and remote app, with the same results (Word, excel, notepad).
I have verified the client and server settings are set to allow printer and clipboard resources, and have verified that there are no GPO's applied to either the server or client.
I have tried to include as much relative information as I can, please feel free to ask any questions and I will do my best to get back to you as quickly as possible.
Any help resolving this is most appreciated!
Sean

Hi Sean,
I wish most of the posters would be as detailed as you are. Good troubleshooting! :)
Two things to try:
1) when you connect DIRECTLY to the server via MSTSC and set a checkbox in the OPTIONS/Local Resources - to share Clipboard - do you then get the Copy paste working?
IF SO
2) Then please make sure that the Published applications - RemoteApp - have an additional line (Custom RDP settings) in properties (you miht need to recreate the RemoteApp's
redirectclipboard:i:1
then it should work.
Virtualization Conference “PubForum 2011 Dublin”,
The Bible of Remote Desktop Services! , Microsoft Virtualization Solutions Day Dublin!

Relation between Business Partner and User

Hi everyone.
Where can i found the relation between the business partnes and user in the tables of CRM application.
Thanks.
Mauricio N.

But in the database where is located this data, which is the table in the database that has the relation between business partners and users???
Thanks,
Mauricio N.

Connection between business partner and organisational unit

Hello,
I have a problem with the account integration in cProjects ( error message: Cost/revenue rate X is not valid in organization 00000000 ) and I think that there could be a problem with the treewalk from the business partner to the organisational unit.
I am using the transaction ppome to customize the organisational unit with the employess. Unfortunately I cannot see this connections when I am using T-Code PPSS to do the treewalk. Does someone know which evaluation path is the correct one for price evaluation?
Is it correct that the connection between the business partner and the organisational unit is:
employee <-> bp <-> org. unit? What is a good starting point to search for the gap between this chain?
When and what for is cProjects treewalking for the price? What calculation is cProj doing with it?
Thanks in advance,
Vanessa

The problem is solved due an incorrect business partner. So the question is obsolet, thx.

Monitor/capture tcp data between a server and client

Hi
I am doing a server/client TCP connection between my laptop and another computer running the server program. With my client program I am able to send commands to the server to which it reacts. However I do not know what the commands are (I just press a button in the client GUI and the command is sent), so my initial thought was that, maybe I was able to monitor/capture the strings/bytes/integers commands, which is send over the TCP/IP. There are only these two computers on the network, so no problem in other traffic there. FYI, they are connected with a wireless peer-to-peer connection.
My problem comes from the manufature of the software making a crabby manual, so really the commands in the manual, which I was supposed to send with my own TCP vi, are just impossible to understand, and don't get me started with their support :-)
SO, any suggestions if it is possible to capture what is sent over the TCP when I press a button in my client GUI?
LabVIEW 8.6 / 2009 / 2010
Vision Development Module 8.6 / 2009 / 2010
VBAI 3.6 / 2010

Matthew Williams wrote:
Wireshark, http://www.wireshark.org , will capture data off the network and sort/display/categorize.
I don't know how well it will work in a wireless environment, we usually use a wired hub (not switch).
Matt
Hi Matt
I have just tried Wireshark, I get a lot of data, so I just have to use a bit of time figuring out what is what, but good program to monitor the LAN connection also wireless. I can monitor all the packages between the client and server. It looks like there is a bunch of data just from keeping the connection active, but again I have to dig a bit deeper before I can say anymore:-)
MikeS81 wrote:
Hi SCMAJA,
another way is to build your own TCP/IP Server with LabView and receive with it the commands send with your client program.
Mike
Hi Mike
Yeah I tried that right now using the TCP Communicator - Passive example, unfortunately the connection between the client and server is kept alive using some commands, so the only command I can get to read is the connect command, because the client then refuses the connection because there is no "right" answer/repsonse from the server :-(
edit:
I just got in touch with the support, and got some of the commands to work. I had to make some crazy command with a header first, then size and last my command, all converted from DEC to HEX.. Not easy to figure out :-)
Message Edited by SCMAJA on 02-08-2008 04:29 PM
LabVIEW 8.6 / 2009 / 2010
Vision Development Module 8.6 / 2009 / 2010
VBAI 3.6 / 2010

Differences between GKAPI server and client modes

Cisco Gatekeeper External Interface Reference does not talk much about the server and client modes. Does anyone know the different between these 2 modes?

Hi Krishna,
Have a look at the two links below. They provide configuration examples for each of the two topologies along with explanation on the different commands used.
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_Routed_Mode_on_the_Cisco_Application_Control_Engine_Configuration_Example
http://docwiki.cisco.com/wiki/Basic_Load_Balancing_Using_One_Arm_Mode_with_Source_NAT_on_the_Cisco_Application_Control_Engine_Configuration_Example
I hope this helps
Daniel

Connectivity between Oracle database and client...

Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.

user11000521 wrote:
Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.You probably should do a cost/risk analysis. Where you are headed might be able to be done (but it will require that the "clients" also have their own copy of the database) but it won't be easy and it certainly won't be cheap, either in initial implementation or in on-going maintenance. The alternative is to take a hard look at your network connections and see if it wouldn't be cheaper/easier to be able to ensure that it is reliable. Remember "the internet" won't break, it is highly redundant. If you have connectivity issues, they will almost certainly be in your own equipment and configurations, so your (your organization) will have the ability to address and fix any issues there.

Best way to configure IPSEC between selected servers and clients

Hi, I've done a fair bit of reading and cbt videos, and have experimented for quite a bit in test environments, and I haven't come up with a best path for what I want to do. If someone could put me on the path to accomplish my goal, I would appreciate
it greatly.
I'm operating in an active directory environment at the 2008R2 functional level. I have a member server processing sensitive data which it receives from clients. My goal is to have all traffic between the member server and its clients encrypted
with IPSEC, but can't quite find what I'm looking for after spending a fairly embarrassing bit of time looking. Do I want:
IPSEC via group policy, whereby I apply a gpo with the IP Security policy "Server (request security)", to the server and apply a gpo to the clients with "Client (respond only)" set? If so, I haven't gotten this working, is
there more configuration needed?
Configure IPSEC Advanced firewall connection security rules?
Both 1. and 2. above?
Server and domain isolation? (This appears to be a lot of reading on whether or not it's a subset of the above methods, or a combination of them, or more).
If someone could point me to some documentation on the simplest way to do this, I would appreciate it greatly!!
Thanks,
Kevin

Hi Kevin,
Both GPO and IPSEC Advanced firewall connection security rules are required.
Here is a step by step guide about how to deploy IPsec policy.
Windows Firewall and IPsec Policy Deployment Step-by-Step Guide
http://technet.microsoft.com/en-us/library/deploy-ipsec-firewall-policies-step-by-step(v=WS.10).aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Design for a semi protocol between a server and client

Hi!
I'm building quite a large client/server application that communicate using Serializable Objects.
There is about 20 actions done between the client and server ranging from
- the client requesting objects from the server
- to the client sending a range of different values to the server.
Does anyone have a design of a protocol that handles a large amount of actions that I could get design ideas off?

Hi!
I'm building quite a large client/server application
that communicate using Serializable Objects.
There is about 20 actions done between the client and
server ranging from
- the client requesting objects from the server
- to the client sending a range of different values to
the server.HOPP / Half-Object plus Protocol / Half-Object part Protocol
This is the pattern EJB's follow.
Does anyone have a design of a protocol that handles a
large amount of actions that I could get design ideas
off?Protocol ? There is SOAP, RTSP, SMTP or HTTP.
To implement a Protocol Handler, checkout the Command & Interpreter Pattern. Command is most useful if you simply know the commands you need to handle, and Interpreter is most useful if you have a grammer you wish to implement.

How to find link between Business partner and Org unit in Solution manager

Hi experts,
Please!!!
I have a requirement where my rule finds business partner assinged for that support team and in transaction ppoma_crm we have org unit assigned to that business partner number below that we have positions and user assigned...
I can find business partner for the transaction now i need to find the org unit for the assigned business partner so i could use for agent determination in workflow.
Thanks and Regards
Annamalai

do you know? ... the structure is like this... i have orgunit then a position to it and then i have assigned a business partner which is with prefix CP... i m not seeing the users assigned to it so my workflow doesnt get triggered if i use this org unit..
regards

Link between Business partner and contact class...

Hi,
I'm looking for a link between BP and BCONTD-CCLASS, BCONTD-CTYPE, BCONTD-F_COMING and so on... ? is there a way to make a simple report that shows i.e. all BP linked with contact class? Please guide and many thanks in advance.

HI,
You can use table BCONTAT .
BCONTAT - CCLASS = BCONT-CCLASS
I would suggest you can explore all tables for BP contact by using search help BPCON* in SE11.
Hope this helps

Linckage between Bussines Partner and Client

Similar Messages

Maybe you are looking for