Line 1 and Line 2

In the profiles>advanced screen it has a listing for my phone number and also another phone number, a 10 digit number starting with 6 zeros. This other line also shows up as line 2 when I select dial voicemail. Why is this other line there and how can I remove it?

Hey everyone.
just go to call log roll over the line 2 number at the top, hit menu and you can edit it from there!

Similar Messages

Shared Lines and Line Group in 8.6.2.22900-9

We have some IP Communicator (SCCP) 8.6.14 and 7911 running SCCP11.9-2-3ES4S
We notice that sometimes when put this version of IP Communicator in a Line Group it does not ring. The desk phone will ring fine, and a IP Communicator running 7.0.3.3 will run fine.
Is this a known issue with CIPC 8.6.14 ?
Shared Lines and Line Group in 8.6.2.22900-9

I neglected, this is a VMWare on UCS ... memory/HDD/CPU is all in spec.

I created a word document with hyperlinks. When my default browser is Chrome the hyper links work. When the default browser is Safari, the hyperlinks bring to pages that just lines and lines of symbols. I need these links to work in both browsers.

I created a word document with hyperlinks. When my default browser is Chrome the hyper links work. When the default browser is Safari, the hyperlinks bring to pages that just lines and lines of symbols. I need these links to work in both browsers. Any ideas?

version 10.6.8

My iPad recently started to act up. I was using Google to find some information on birthday cakes and recipes. I selected 'images' but instead of the little thumbnails I got computer code. Lines and lines of the stuff. This only happened yesterday. The iP

I see this problem has been posted before , but no advice has been added , please help if possible .
My iPad recently started to act up. I was using Google to find some information on birthday cakes and recipes. I selected 'images' but instead of the little thumbnails I got computer code. Lines and lines of the stuff. This only happened yesterday. The iPad was working perfectly up to then. I am having no other problems. Google images work fine on my iPhone and my Mac Book. I would be very grateful if somebody could help.

The problem is absolutely not Reader. The problem is that FireFox has stepped in front of Reader and handles all the PDF stuff - wrongly in your case. FireFox is DESIGNED to take over PDF files. But it is not capable of doing IRS forms!
To start with go back to IE for these forms. When you save them to disk DO NOT DOUBLE CLICK ON THEM until this is fixed. Just open the in the normal way - start Adobe Reader and use Open from the File menu.

Depr key lini and lins

Dear Forum,
LINI Str.-line frm acq.value pro rata to 0 w/o interest
LINS Str.-line over rem.life pro rata to zero
May I know what is the difference for these 2?
Thanks
Rgds

Hi,
both have straight-line depreciaiton, but they are really different.
Please see in Tr. AFAMA:
LINI
Ord.depreciation     1     0007     001     003     010
LINS
Ord.depreciation     1     0011     001     003     001     5     0,0
Ord.depreciation     2     0017     001     003     013          0,0
Main Differences:
1) As you can see LINS has a second phase (5 Changeover after end of the useful life)
2) Treatment of end of depreciaiton
LINS: Dep. after plnd.life end: No
LINI:   Dep. after plnd.life end: Yes
3) Base value
LINS: 24       Net book value
LINI:   03       Replacement value
Regards Bernhard

I turned my MacBook Pro and got an error message with lines and lines of code and then it turns off

I turned on my MacBook Pro and got an error message with several lines of code and then it turns off

Were you able to see any of the error codes? Have you tried resetting NVRAM (booting while hold cmd+option+p+r until the second chime)?

Getting a watermark background image to underlay box lines and lines.

I've added a page header to my report with a watermark that underlays following sections. My box lines aren't showing up because the image covers them. Everything else displays above the image. Is there any way to solve this problem without using text boxes with borders?

I tried this and it didn't turn out very well. My image is really light gray in colour (with a white background) and I'm having a rough time making the transparency show up in Crystal since it won't support .GIF images. When I do it in .JPG or .PNG it corrupts the image so bad you can barely see it after its been made transparent. I'm using GIMP 2.0 as my editor. I don't know if there is an easier way to do this. You would think the program would have a simpler way to add a background image into reports. -.-
Edited by: MarcieHennessy on Jan 9, 2010 12:12 AM

At the end of every e mail I send there is typed garbage, instructions, letters, numbers, characters, lines and lines of this. What can I do to fix this

At the end of every e mail I send there are strings of letters, numbers, signs, etc. How do I fix this?

yes, here it is:
From: Joyce Bell <[email protected]>
To: Mary Ellen Pounds <[email protected]>
Sent: Wednesday, February 12, 2014 8:44 AM
Subject: Wednesday
I have typed two e mails and stopped to look at tv and then the e mail was gone. What is going on. I am sending this now to tell you more are coming as I think to retype them.
Joyce Bell
Preferences
1
2
3
4
5
6
7
8
9
0
=
Backspace
Tab
q
w
e
r
t
y
u
i
o
p
Return
capslock
a
s
d
f
g
h
j
k
l
shift
`
z
x
c
v
b
n
m
shift
English
alt
alt
Preferences
Preferences

I click. Firefox reverts to strictly text. All html coding disappears and I am looking at lines and lines of purely text.

I don't know how to explain it better. A screenshot would be perfect, but I can't figure out how to add that. I have uninstalled Firefox and reinstalled it. I have uninstalled Firefox and all of my bookmarks and everything associated with Firefox, restarted my computer and then reinstalled Firefox. The problem persists.

Wow! I figured out how to get that screenshot on here. :) Also, here's the troubleshooting information. Will this help you help me?
Application Basics
Name: Firefox
Version: 26.0
User Agent: Mozilla/5.0 (Windows NT 6.2; WOW64; rv:26.0) Gecko/20100101 Firefox/26.0
Extensions
Name: AVG SafeGuard toolbar
Version: 17.1.3.3
Enabled: false
ID: avg@toolbar
Name: PasswordBox
Version: 1.18.0.2194
Enabled: false
ID: [email protected]
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
browser.places.smartBookmarksVersion: 4
browser.sessionstore.upgradeBackup.latestBuildID: 20131205075310
browser.startup.homepage_override.buildID: 20131205075310
browser.startup.homepage_override.mstone: 26.0
extensions.lastAppVersion: 26.0
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1386791492
places.history.expiration.transient_current_max_pages: 99550
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1386791492
Graphics
Adapter Description: Intel(R) HD Graphics 4000
Adapter Drivers: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Adapter RAM: Unknown
Device ID: 0x0166
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16581)
Driver Date: 10-17-2012
Driver Version: 9.17.10.2875
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 10
Vendor ID: 0x8086
WebGL Renderer: Google Inc. -- ANGLE (Intel(R) HD Graphics 4000 Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.2
Version in use: 4.10.2
NSS
Expected minimum version: 3.15.3.1 Basic ECC
Version in use: 3.15.3.1 Basic ECC
NSSSMIME
Expected minimum version: 3.15.3.1 Basic ECC
Version in use: 3.15.3.1 Basic ECC
NSSSSL
Expected minimum version: 3.15.3.1 Basic ECC
Version in use: 3.15.3.1 Basic ECC
NSSUTIL
Expected minimum version: 3.15.3.1
Version in use: 3.15.3.1

Line and Iphone 3 (and IOS 4.2.1)

hi,
I have an Iphone3, with IOS 4.2.1.
I had Line, and Line worked well. (last week!)
Now, for Line, I need IOS 4.3. And IOS 4.3 doesn't work for Iphone 3.
How could I use Line in my Iphone?
Thanks for your help.
arnaud

You cannot, unless the older version that was iOS 4.2.1-compatible is still in iTunes or elsewhere on your computer.

Recording using line 2 and line 3 xfi

i have asked the tech for help on this but didnt come up with anything,
is there a solution to this or has anyone managed it's
im trying to record from 2 devices (micraphone and
?guitar) at the same time but i would like to record these onto 2
seperate channels using eg Reason or Abelton li've,
the only way i can see doing this is if i can plug into line
and line 2 and record from both similtaniously, is it possible to
?activate line and line 2 at the same time?

I don't know X-Fi cards but supposed you need to work on Audio Creation Mode + ASIO driver mode. On your recording software, check what input ports are available, enable those ports you need (normally through <software> options audio ... ) and select each port for tracks properly.
Remember that instrument/vocal is 'normally' recorded as mono source -> you don't necessarily need more than one stereo input channel for this task (if you have pre-amp for mic/both) or one mic input + one mono channel (from stereo input).
jutapa

Is it possible to change the attributes of lines in Line Charts?

I always think there are no dumb questions but this one actually might qualify because for some reason I'm unable to find a way to change the line color and thickness in Line and Line & Bar Charts. Web Intelligence must be intelligent enough to let me do this, right?
Thnx,
David

Thank you!
So this is again another example of the Web Intelligence product not achieving it's goal, and to me that is simplifying the creation of reports that can turn data into valuable information on which people can make better, more informed decisions. Shame! And I've noticed that this is the case for far more features of Web Intelligence. Please, SAP BusinessObjects, stop including marketing only related functionalities and build a better reporting tool!
As to your answer regarding the palette, this is true but is not a generic solution as this goes for all line graphs (and bar, pie charts?). It is not very user friendly as well!
But thanks for the quick response and confirmation.
I'll keep the post open a little longer to see if anyone else has comments or similar feelings!
David

Lini vs lins

Hi Consultant,
I would like to seek advice on the difference of lini and lins.
for depreciation, i notice that lini will base on the apc whereas lins base on the carried forward nbv from the previous year and also the useful life is the balance of the useful life.
i compare both lini and lins in afama but i really do not know which part giving the difference.
need advice on where lins different from lini in afama which tell that lins depreciation must base on carried forward cost and useful life is the balance of the useful life and not use the complete useful life.
Thanks

Hi,
1) LINS hast 2 phases, LINI only 1. After "end of useful liefe" Lins change in secon phase and
2) Depr. after end of planed Life: LINS NO, LINI YES
3) LINS Acquisition value LINI Net book value LINI Replacement value
ad 3)
replacement value is the current valuation of an asset, which is different from the acquisition and production costs.
The replacement value of an asset can result, for example, from the following influences:
1) Price changes because of inflation
2) Price changes because of technical advancement
regards Bernhard

Urgent - "Vendor balances carried forward and line items report."

Hello,
Is there any report which will give me the vendor balance carried forward and the line items during that period.
==============================================
Format-
eg: statement taken from 1.8.2006 to 30.9.2006 is required as
Bal b/f 25000 cr.
3.8.2006 Purchase Inv XXX 3000 cr.
5.9.2006 Payment Chq XX 26000 dr.
Bal c/f 2000 cr.
==============================================
Please advise on this.....
Regards,
J

thanks for the response, but i have already tried those transactions.
FK10N will give me the periodic bal statements and NOT line items display which will also have balance carried forward.
F.41 and F.43 again gives the periodic and line items...but i want the vendor balances to be in the format given above..
like say, account statement.
Please advise............
Regards,
J

Is there a DIRECT link between SD schedule lines and delivery lines?

Is there a direct link (db table) between schedule lines on a sales order (VBEP) and the delivery lines (LIPS)?
Is there a function module to retrieve the data?
Example-
One order line with 3 schedule lines.
Each schedule line is for 2 units (total of 6 units).
Three deliveries made. 1st is for 2 units, 2nd is for 1 unit (backorder), 3rd is for 3 units.
You can use document flow (table VBFA) or examine the SD document in the delivery line (LIPS) and link the delivery line to the order line. The schedule line already references the order line.
I am using math to decrement the schedule lines used and make the link between VBEP and LIPS. It works fine. I need four records back....
1st schedule line for 2 units uses delivery 123
2nd schedule line for 1 unit (partial) uses delivery 124
2nd schedule line for 1 unit (partial) uses delivery 125
3rd schedule line for 2 units uses delivery 125
Like I said, it works. Just wondering if I missed a more direct link.

As far as Db link is concern , I dont remember exactly , but 3 years before I had written a report which see Sales order schedule lines and devilry note lines against sales order. If you see process wise. when ever you create PO ( production order you assign some qty using 101 movement type .. and against production order you also give sales order . When you do delivery ( run seclude run ) it delivers against that material number , its movement is 601 ...
but I remember theres a link between these tables, VBAP,VBFA AND VBEP , LIPS ... against every sales order you can see sales invoice ( VBRP,VBRK) and you can also see your delivery note number in document flow .
I hope thisll give you some guide line, as right now I can not tell you the exact business process but I remember I written a report in SD 4 years before , in which they required Delivery against production order and sales order ... One more thing you also have production order reference on delivery item number. ( field :Empst ) . I think in my project they were maintaining this field .
Thanks

How to compare delivery date in schedule lines and PGI in outbound delivery

Hi,
I want to create a report to monitor and compare different dates in sales and delivery process.
One of my key figure is the comparison between date confirmed to the customer, that I can find in the schedule line of the sales order, and the actual goods issue date from the outbound delivery.
But I can't succeed in making the link between delivery and schedule lines, means between LIKP and VBEP.
Would you have any idea?
Thank you.

It seems there's no exact (table) connection / link between delivery item and schedule line item.
Those who were searching for this thing (link / connection between delivery item and schedule line) were recommended to use FM "RV_SCHEDULE_CHECK_DELIVERIES".
This FM calculates the delivered quantity for each schedule line, so it makes link between the delivery item and schedule lines - however if you check the code it's quite sophisticated...
(if you put a breakpoint in the FM and display a SO in VA03, you can check how the parameters have to be populated with data).
Schedule Line and Delivery Link
Edited by: Csaba Szommer on Aug 5, 2011 12:03 AM

Line 1 and Line 2

Similar Messages

Maybe you are looking for