Line 2 Is Causing Big Problems!

I'm new here so pardon the ignorance. There seems to be a line 2 on my new Curve phone that I don't believe I need nor did I activate it. From time to time the active lines are switched and I miss very important business calls which I cannot afford to do. Please help me find a way to either disable line 2 or to remove it completely. Any help will be greatly appreciated.

Hello and welcme to the Frums!
Have you tried contacting your carrier to see about a second line on your phone ?
Nurse-Berry
Follow NurseBerry08 on Twitter

Similar Messages

Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?

Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?
iMac is connected via wirelss to printer/scanner. All was working OK until update.

Assuming that the HP software is up-to-date, but still not working, have you tried Image Capture in the Applications folder. Does that work?

XSan Corrupt Files Causing Big Problems

Hello
We have 2 PPC XServes running 10.4.8 with XSan 1.4.1 on 1x Xraid, xsan user quotes are also setup. This all seems to be working smoothly but we have serious issues when users save files that have exceeded the file space they have been given.
We get corrupted files ending up 0k or 4k. Basically students think they have saved files correct but when they come back to opening the file it is corrupted so they loose work. It is becoming a big problem as students are loosing work and I dont have any control of notifying the user before they hit the quota limit they have been assigned.
Does anyone else have this problem or a solution as I would greatly appreciate this.
Regards.

Hello Lee,
When you setup user quotas in XSAN admin, you should be able to set a soft quota and a hard quota, this should result in your users getting warning message when the soft quota is exceed and an error message of -1425 when they try to write over their hard quota.
There's also a quota application installed with XSAN that tells them how close to their quota they are at at all times.
Are you not seeing any error messages before the quota is exceeded? And exactly how are these files corrupted? Can they not open them at all or can they open them and it's just not quite right?
Mac OS X (10.4.8) XSAN for Video Certified Technician for Hire

ITunes 8 causing big problems

iTunes 8 has messed up my computer. I cannot sync. When I plug my ipod in while computer is running, it crashes my system. After the system reboots my ipod is recognized by the computer but not by itunes. Therefore, it won't sync.
But even worse than that I can no longer sync my smartphone. I get the same recognition problem. The computer "sees" the phone, but the software doesn't.
Can anyone help?

256*256*256 is fine, it will fit into an int, since its < 2^31 -1
However, because int is signed, the most you could squeeze into it is 2^31 - 1.
Which is 128 * 256^3 -1.
You're multiplying 256^3 by 212. Java evaluates the right hand side of the expression, sees that everything is of type int and so assigns the result to an int, thus causing overflow. This overflowed negative number is then assigned to y, giving you your strange result.
McF

Log and Transfer in Background causing big problems

I don't know if you are supposed to be able to have Log and Transfer importing in the background while you edit, but it seems to allow me to do this, but I have found a VERY BAD side effect.
Log and Transfer goes about it's business importing, but if I click around in the the bin, playback other files that are already imported, etc. Log and Transfer will not fully import the clips it is working on. BUT, instead of giving me ANY error, it simply thinks it did it's job. The end results is a clip in my bin that is maybe 10 seconds long and the matching clip on the SD card is 5 minutes! No error messages anywhere.
At first I thought I had accidently stopped recording on a good number of my clips. I was freaking out. Thankfully I found that the clip on the SD card was the full 5 minutes long. When I reimported it (without doing anything in FCP at the same time) the full clip came in. (THANKFULLY I had a disk image of the SD card and wasn't just relying on my backup for the FCP files post import).
Now I just make sure not to do anything in FCP while it's importing from Log and Transfer, but it seem like quite a dicey situation that could get people in a log of trouble.

Me too. I've learned the lesson. But I thought FCP used to NOT allow this. It would beep and not let me do anything else.
I'm sad they let you do it, because someone can do it without realizing importing is still going on and mess things up and not realize it until down the road in the edit and be screwed.

Big problems with my K7N420 Pro

I've been having what is apparantly a hardware problem with my computer. Randomly the thing just resets. About once a day. Sometimes more, sometimes it goes for several days without resetting. I check the temperature in BIOS setup whenever I catch it resetting, and the CPU temp (CPU is 1700+ XP) is always between 140 and 150, not an unusual temperature (is it?)
I got to thinking that maybe the temperature does have something to do with it, so I set to blowing out the dust, thinking that should help. So I blow all around with some canned air, I close it back up, and turn it on - but something else happens. During POST the computer freezes, right at the line where it tells you how much memory you have. I reboot. It works. I run the system restore from the XP installation CD from boot, thinking "just in case it was Windows crashing all along". It freezes in mid-operation. I also start to smell something burning, you know that horrible smell of plastic burning, I'm sure. Now I panic and shut it down. I crack it open trying to determine where the smell is coming from, but can't figure out where. I boot again, with the case open, hoping to catch a stronger smell (suspecting the PSU.) Instead of booting it beeps in my ear, several very long beeps. I can't tell if they are supposed to be one continuous beep, so I can't tell what they are supposed to mean. The manual doesn't have an entry for that code. The lights in back showed one green light in the upper left, all others red. The manual says that means "Early Chipset Initialization". What the hell does that mean?
Can anyone here put these symptoms together for me and tell me what is wrong with my computer? Did I just cause another problem when I used the canned air, or was this likely a new symptom of whatever problem was causing the random reboots? Is the problem likely the PSU? Thanks.

Okay so I think I jumped to conclusions with my last message. I was tired, it was a long day, I wanted to make some quick progress in little time before I crashed (no pun intended.)
Since the configuration Slot 1: Crucial stick, Slot 2: Kingston stick, Slot 3: empty caused big problems, and Slot 1: Crucial stick, Slots 2 and 3: empty, did not, I started to wonder if I could be jumping to another conclusion, and if the problem could be on the motherboard somehow. So I tried the configuration Slot 1: Kingston stick, Slots 2 and 3: empty, and it POSTS fine! And just to confirm, I stick the Crucial stick into Slot 2, and the thing won't POST properly. First three attempts, the computer won't even activate the monitor, the fourth and fifth, it does activate the monitor, but the initial BIOS screen (the one where the memory is checked in the POST when you disable quick boot) looks all corrupted-like, with strange characters littered across the screen. I stuck the Crucial in Slot 3 to see what that would do, and the first time it freezes around 88MB during the RAM check (I left quick boot disabled), the second time it POSTS successfully.
So maybe something on the motherboard went bad such that using Slots 2 and 3 causes these problems. This model is pretty old, so does this problem sound familiar? Is it possible? I don't know the hardware architecture well enough to guess whether it's likely.
(I have BIOS revision 2.7)
EDIT: And after trying all those configurations, going back to the original configuration, (Slot 1: Crucial, Slot 2: Kingston), it STILL beeps at me like before.
EDIT EDIT: *sigh* and now, trying the second configuration again (Slot 1: Crucial, Slots 2 and 3 empty) just so I can use the computer again, I get errors when I try to boot. Booting to the OS I already had installed, I get the Windows screen with the moving blue boxes, and then after that nothing, and whenever I try to install a new copy of the OS from disc or repair I get a BSOD. It says IRQL_NOT_LESS_OR_EQUAL. I've no idea what that means.

Problems re-installing after on-line updates cause version change from install CD

I'm running AcroPro 6 updated to 7.1 through on-line updates, on laptop and was on desktop. The laptop runs just fine with no issues, and Acrobat 6 does everything that I need done, so I don't have any desire to upgrade to the latest and greatest. Problems with Acrobat on the desktop caused me to uninstall it, and I couldn't reinstall it.
Now, using the laptop in conjunction with the desktop isn't the most convenient because I'm creating documents on the desktop, and then have to port them to the laptop, do whatever is needed there in Acrobat, and then port back. Usually all that I need to do is to assemble a pdf from separate pages, insert or remove pages from a pdf, or to apply security. Nothing particulary fancy.
Acrobat on the desktop worked fine for many years, but at some point reported an issue finding the printer, and refused to print anything. After trying everything I could think of as a possible solution I, perhaps foolishly, uninstalled Acrobat with the intention of reinstalling it and having the problem resolved. On attempting to reinstall, starting from the original Acrobat 6 CD, the installer reported that a later version of the software was installed, and exited. It would seem that simply uninstalling Acrobat leaves sufficient references in registry or other places for the last update applied to be determined during installation.
There seem to be two possible options so that I can avoid the, to me, unneccesary expense of upgrading to the latest version of Acrobat.
Locate and remove the source of the data that the Acrbat 6 installer is reading and which causes the installer to exit, or
Slipstream the updates (to 7.1) into the Acrobat 6 installation files, so that the version I would be attempting to install is the same as the verion that I uninstalled.
I tried scanning registry to find all references to Acrobat and or Acrobat 6, but I'm not certain this is the best way. Missing one might be critical, and removing them might just cause worse problems.
I tried slipstreaming the Acrobat 6 installer, but it fails using the msiexec /a switch, as it appears that Acrobat 6 wasn't designed to work with an administrative install point, according to the pop-up dialogue box.
My problem is that while I just want to reinstall Acrobat 6, update to 7.1, and go on happily, I can't see how to do this. Can anyone advise if there is a solution other than upgrading?
Thanks in advance for you thoughts, all will be appreciated!

Thanks John, Bill and Graffiti for your interest!
The original install, many years ago, was of an education version from a local college. As updates became available thorough the update manager, they were installed. As stated above, it updated though 6.0 to 6.6, and then on to 7, eventually to 7.1! I can only repeat what happened, but not explain it. I thought nothing of it at the time, as it was all being managed by the update manager. I agree that this last seems to be more an upgrade than an update, but... what can I say? What happened is what happened, and it happened as I described it.
But not's get hung up on the history! Now that I seem to have solved the original issue of not getting past the message that 'a more functional version has been detected', how does one solve the 'invalid serial number' issue that occurs when attempting to reinstall 6.0? Delete the Acrobat registry keys from HKLM and HKCU, and possibly anywhere else? The former didn't work yet, so, where else? Maybe there is an 'update' folder hanging around somewhere with a registry reference that needs to be deactivated? Something like {AC76BA86-0000-0000-7AC5-6028747ADE00}?
Any further thoughts? And thanks for the input, it really is appreciated!

Is this a big problem or one that will go away? Small lines on screen

I have a row about 2 or so pixils big, halfway across my screen. You can barely notice them on the background, and I dont notice them when I move my safari window over it. But I have changed my desktop background to different things, solid colors, photos, random photos apple had in there, and the lines were still there.
It is about 4 rows, very thin, different lengths, right side, just below the center of the right side of the screen.
Is it the beginning of a big problem? I was thinking of calling up applecare then going to an apple store to have the screen replaced.

Thanks. I will back up my data this wednesday, install snow leopard on friday (i doubt it would do any fixing... want to see it though, cant wait to install it :P). Then on the 8th I will schedule an appointment and go to the apple store. That way I can make 1 trip. I plan on getting my ipod touch replaced, the battery for some reason doesnt hold a charge too well, last night on wifi the youtube app drained 25% in 20 minutes.

Big problems with CS4 and new computer!!!

System information: This Computer
CPU Manufacturer: GenuineIntel
Number of CPU: 1
Cores per CPU: 4
CPU Type: Intel Core i7 920 @ 2.67GHz
CPU Speed: 2674.4 MHz
Cache size: 256KB
O/S: Windows 7 (64-bit)
Total RAM: 12279.1 MB.
Available RAM: 10447.6 MB.
Video settings: 1920x1200x32
Video driver:
DESCRIPTION: NVIDIA GeForce GTX 260
MANUFACTURER: NVIDIA
BIOS: Version 62.0.4c.0.1
DATE: 9-27-2009
Drive Letter: C
Total Disk Space: 279.5 GBytes
Cluster Size: 4.0 KBytes
File system: NTFS
I very grateful if some could help me!
Sami Malmberg
[email protected]

Sami,
Thanks for the file and the screenshots. A couple of remarks.
Try to update your BIOS. You currently have version 05.04. There may be a newer version available, although the file date is 05/19/2009, so it may be current. Just check it please.
You have ASUS Six Engine running. I would disable that from starting. I never found a use for it, I prefer to use my own judgement.
Here are your results in comparison to my score, while running at a clock speed of 3441 MHz, so about 30% faster.
As you can see, your CPU results are in line with mine, considering the 30% difference in clock speed. The same applies to your memory mark, nothing wrong with that either. You did not test the CD speed, and that can lead to a lower PassMark rating. Rerun the test with a CD or DVD in the drive. That may help.
Your video card is causing serious problems. The speed of the video card is not really CPU clock speed dependent. Your results are very disappointing. First thing to check is whether you have the latest drivers. Your 2D Graphics results are about 1/3-rd of my results and the 3D results are about half of what I achieved. This is rather surprising, since I would have expected the nVidia card to be much better than shown here.
Your disk results are disastrous for the final benchmark result, but on the other hand, not unexpected. Your results are done on a single disk in comparison to my 12 disk array, which is around 10 times faster, even with parity calculations.
To summarize, your video card is the big bottleneck here. Check for new drivers, altough based on the date of the drivers, it seems unlikely there are newer ones. An alternative might be to temporarily reduce your screen resolution and rerun the test while using something like 960 x 600. This will possibly lead to a higher score, although that is faking it a bit.

Helloo! I have super big problem with my Air.

Helloo! I have super big problem with my Air,10.8.5 ,it asks every 10 sec to make some changes and asks me for password all the time!! I cant acces my documesnt,pics,music,NOTHING at all! Finder is not working,i cant open any folder,icons are missing also,i cant open any of them,mozzila,chrome..im really going crazy.. i updated tonight my phone on new IOS 7 through my comp,cant be that i messed up everything because of that..this comp.is like 10 days old.
btw. i created new user,and everything is working ok.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Hello everyone!! I'm having a big problem trying to reinstall oracle xe 10g

I'm having a big problem with Oracle XE 10g, and I have no more ideas about what should i do
Some weeks ago I installed this database on my PC, and everything was working fine. I could access to the DB, with the web interface or command line.
But I uninstalled all the system 'cause suddenly I started having problems with the SQL command line, and now, after reinstalling the system several times, I can't acces to the database (web or command line).
When I try to acces manually by command line, this happends:
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Jue Sep 9 11:23:52 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: sys
Password:*********
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Another try:
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Jue Sep 9 11:17:24 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> CONNECT SYS as SYSDBA
Password:********
Conected to an Idle Intance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file 'C:\oraclexe\app\oracle\product\10.2.0\serv
er\dbs/spfileXE.ora'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) System cannot find the file.
SQL> help
SP2-0171: Help system is unavailable.
What should I do???? Reinstalling Oracle XE is not working fot me.... U_U
Thanks!!!

Finally I discover what were happening to me...
When you remove oracle XE, the uninstall system "forget" to delete the route of the bin directory in the PATH variable
Thanks for the help!!
=)

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click

Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Big problem with a select using remote database

Hi Guy.
I have a big problem with a simple query, but this is a scenario.
Actuallly I'm in Alexandria - Egypt with a server with Oracle 10.2.0.4 database 32 bit on linux Red Hat as 4.8. the server can connect to another database oracle but 9.2.0.6 installed on Red Hat As 4.5 placed in Milano Italy . Ttwo networks are connected via two adsl cisco router with firewall and Vpn functions. In Egypt there isn't a very good adsl.
In Alexandria, I'm trying to connect to database in Italy with sqlplus. The sqlplus connected I write.. select * from addetti and all work fine.
My problem is that when I try to make the same select on a table with many columns oracle database kill me a session.
My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.
So I began to change my query I start to
select field1 from ic_lav... and work
select field1,field2,field3,..........field50 from ic_lav and work
select field1,field2,field3,..........field70 from ic_lav and doesn't work
the select work with 68 columns
problem: the query with more then 1064 byte for row doesn't work.
I've tryed with anoter big table with the same problem, but the select fwork with 65 columns...
Iit is obvious that there is any problem with the limit of the query.
The same query (select * from ic_lav) in localMilano)l work fine.
The same query (select * from ic_lav) in vpn with a better adsl line and openvpn software (NO CISCO firewall) WORK FINE.
The same query connectetd in Milano with a vpn make with analogic modem and remote access by windows work fine.
the query (make on my laptop connectet with vpn by cisco doesn't work.
In cisco firewall we haven't any error (cisco man tell me so)
on database 9 I found :
*** 2009-06-12 09:49:45.509
*** SESSION ID:(66.44406) 2009-06-12 09:49:45.497
FATAL ERROR IN TWO-TASK SERVER: error = 12152
*** 2009-06-12 09:49:45.509
ksedmp: internal or fatal error
Current SQL statement for this session:
select * from ic_lis where ditta
----- Call Stack Trace -----
but I don't understand why the lost connection problem (bug 3816595 A processstate dump is produced for a lost connection (12152) ) is caused by len of row
Anybody have some idea ?
Thank you

My table (ic_lav) is long 174 colums 1924 byte for row. Well when I write a query with select * from ic_lav all oracle close my session.Do you get any error?
If the query length is a problem, you could create a view and query the view instead to see if this problem is resolved.

How to load an image without a gui? big problems...

Hey guys, I usually try my best to not ask for help and figure stuff out myself. But this last week i've been having big problems with this work project.
My goal is to load images from disk, and append them to each other to create one big image.
The images are 0-9.jpg each file containing a number in it. then i create one big file with 4 numbers in it. called final.jpg.
so far i can do all this, but whenever the program is finished, the application just keeps running. the program has literally gone through all the steps... i have a system.out.println printed on the last line after the main, after the class instantiation... and still it stays running.
how do you guys load images without a gui? This program will probably be running under unix, so i can't create a (for component example)
Panel() and media track the file load... so i'm pretty much stumped
any help you guys can provide would be really incredibly helpfull at this point. I have searched these threads for a few hours without luck. I found only 1 real post related to my problem, but eventually they said use MediaTracker = new Mediatracker( new Panel() ); which i can't use. :(
Thanks a lot guys.
:D

yeah tried doing that, didn't work either.
UPDATE
I FINALLY found a way...
and here it is for others to find!
public BufferedImage getImage(String filename) throws Exception {
FileInputStream input = new FileInputStream( filename );
JPEGImageDecoder decoder = JPEGCodec.createJPEGDecoder( input );
BufferedImage image = decoder.decodeAsBufferedImage();
return image;
it returns an image buffer, but it's better than nothing! :)
atleast this functions under unix.

How to find out the line which caused the runtime error in a SP?

We have a situation like this.
We are consulting company doing consultancy services on Oracle technologies.
One of our clients have PL/SQL stored package.
We found out by debugging the Oracle Forms front-end application that
error is generated by a procedure inside this package.
Problem is that this procedure has over 6000 lines.
How do we figure out the line which caused the error?
We tried putting messages in between, but not have been successful.
Any help would be greatly appreciate.

How do we figure out the line which caused the error?
We tried putting messages in between, but not have been successful.
What does that mean exactly?
Typically you would instrument the code (especially for multi-step ETL/transform processes) to capture/log key information.
Also, key sections of code would also be in their own BEGIN/EXCEPTION/END block so that you would know what block caused the exception.
step_num NUMBER; -- what step is being executed?
BEGIN
step_num := 1;
. . . do something
step_num := 2;
. . . do something else
EXCEPTION
-- when you get here the 'step_num' variable will have the number of the step that caused the exception. Log it and then handle/reraise it.
END;

Line 2 Is Causing Big Problems!

Similar Messages

Maybe you are looking for