Line after window

How to draw a line after any window in a smartform ,,,,,
regards,
Shashank

In the OUTPUT ATTRIBUTES just click on Windows Box And shading portion and select the lines. this will display the border of the window.
Regards,
Amit
Reward all helpful replies.

Similar Messages

Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When view prior to sending the document is divided with black lines after each sentence.

Pages is sending my documents in docx format, but windows unable to open them. They arrive blank or can only be read as a single line at a time. When viewed prior to sending, the document is divided with black lines after each sentence.

Windows will only be able to open these if you have Word 2007+. Older versions of Word, for example Word 2003 would require a compatibility pack.
Perhaps you can try 'Saving As' a different file type instead?
Regards,
Steve

Overflowing one line after my main window box

hi,
in my form in main window i designed a box and it holds 24 lines . after the end of the box in first page another one line is
showing that means i want that 25 th line should go to the next page .how to do it???
because here by default in my first page it is displaying 25 lines.
please let me know how to do it???
my bos i defined like this
ubb, 12.05.1999 -
draw the MAIN-BOX v-lines -
on every page
POSITION XORIGIN '-0.5' MM YORIGIN '-0.5' MM
SIZE WIDTH '1' MM HEIGHT '1' MM
SIZE WIDTH '284' MM HEIGHT '77' MM
BOX FRAME 10 TW
BOX WIDTH '30' MM HEIGHT '77' MM FRAME 10 TW
BOX WIDTH '85' MM HEIGHT '77' MM FRAME 10 TW
BOX WIDTH '148' MM HEIGHT '77' MM FRAME 10 TW
BOX WIDTH '167' MM HEIGHT '77' MM FRAME 10 TW
BOX WIDTH '176' MM HEIGHT '77' MM FRAME 10 TW
BOX WIDTH '201' MM HEIGHT '77' MM FRAME 10 TW
BOX WIDTH '214' MM HEIGHT '77' MM FRAME 10 TW
BOX WIDTH '237' MM HEIGHT '77' MM FRAME 10 TW
BOX WIDTH '252' MM HEIGHT '77' MM FRAME 10 TW
DEBASHIS
BOX WIDTH '284' MM HEIGHT '77' MM FRAME 10 TW
thanks.

Hi,
Reduce the Height of The Window and Box
or increase The font Size
Automatically The 25 Line will go to next page
With Regards,
Vinu.R

Line after text in smartforms display

Hi ,
Issue 1:
I want to display a line after a text.
Ex: Name _______________________________________
I am unable to display the line till the end of the page.
When I save and activate, the line gets shortned itself as below.
Name ___________________________
Issue 2:
I am unable to print the text that i want in bold inspite of using bold in character format.
Any suggestions?

i too faced the same previously i solved it as
1).in your text element where you drag & drop your fields there itself for line what you ask
write there itself upto it enters into next line when ever it enters into next line press back space so it takes the complete window width but dont click on the edit icon and write there.
2). instead using charater format in your style create a paragraph format in bold format
Both will works.
Thanks,
Phani.

Green pixel lines after installing 10.4.6

I started getting green pixel lines on my screen following installation. They appear when windows open and remain after windows are closed. They also appear around the desktop icons, but mostly on the left side and bottom of the icon.
Any thoughts on how to eliminate this problem?
I have run permissions repair several times.

jcaz,
Find the com.apple.finder.plist, and the com.apple.systemuiserver.plist file in your ~Library/Preferences Folder. Drag these plist files to your Desktop, log out/in or restart.
If unsuccessful, can you duplicate this behavior if you create a new user?
Reinstalling the Mac OS X 10.4.6 Combo for PPC is an option if the behavior is observed in the new user account.
;~)

Firefox won't start after windows update

After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
XML Parsing Error: undefined entity
Location: chrome://mozapps/content/extensions/update.xul
Line Number 14, Column 1:
<wizard id="updateWizard"
^
Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
Thanks
DK

I cheated a little bit and put the issue url in a working version of firefox:
chrome://mozapps/content/extensions/update.xul
What I got was a page that looked like this below and console:
blah blah parser:
<pre><nowiki> xml-stylesheet
xml-stylesheet
<wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
<script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
<stringbundleset id="updateSet">
<stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
<stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
</stringbundleset>
<wizardpage id="dummy" pageid="dummy"></wizardpage>
<wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
<description></description>
<checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
</wizardpage>
<wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
<label>
Checking your add-ons for compatibility with this
</label>
<separator class="thin"></separator>
<progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
<hbox align="center">
<image id="versioninfo.throbber" class="throbber"></image>
<label id="versioninfo.status" flex="1" crop="right"></label>
</hbox>
<separator></separator>
</wizardpage>
<wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<listbox id="mismatch.incompatible" flex="1"></listbox>
<separator class="thin"></separator>
<label>
Firefox can check if there are compatible versions…
</label>
</wizardpage>
<wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
<label></label>
<separator class="thin"></separator>
<progressmeter id="checking.progress"></progressmeter>
<hbox align="center"></hbox>
</wizardpage>
<wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
<description></description>
<separator class="thin"></separator>
<hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
<separator class="thin"></separator>
<description id="noupdatesCheckEnabled" hidden="true"></description>
<vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
<separator flex="1"></separator>
<label></label>
<separator class="thin"></separator>
</wizardpage>
</nowiki></pre>
I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
[http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents.

System should take automatically to next line after scanning serial number

When in SAP serial selection screen i scan serial number(barcode) with scanner system should take me to next line after population of serial number in one line is completed.
In delivery in select serial numbers window against serial number field in multiple selection if i scan barcode a single serial number is populated in one field after this system doesnt take me to next field automatically ,I am manually taking the cursor to next line.
If i scan the barcodes with the same scanner in Excel file cursor moves automatically to next line.I want same in SAP
Make of the scanner is TVS electronics made barcode scanner -BS- L 101 Platina U
How to automize it.
Please suggest me solution.
We tried with BDC but it failed.

Hi,
We can set the cursor postion using this statement SET CURSOR FIELD f LINE lin [OFFSET off].
We need to use this in custom Programs.
Please reffer the links below:
[Cursor Position In TABLE CONTROL;
[How to set cursor on next row in TAble control?;
[http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbac9f35c111d1829f0000e829fbfe/content.htm]
I hope this may helpfull.
Thank you,
Thanks,
AMS

XE service lost after windows server 2003 restart - must start repair

I have a problem with Oracle XE 10g on Windows 2003 SP2.
Installation went fine, I could use database, go to home page, add tables, views, functions etc.., link database to sql server and query tables from several sql several sql servers on the network etc.
In general everything was fine, but...
After windows 2003 restart XE service does not start, db home page is not accessible and
lsnrctl stat
is giving me:
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-RUJ-2009 22:46
:26
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR
_XE))(ADDRESS=(PROTOCOL=TCP)(HOST=sql-server-test.ie.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-RUJ-2009 22:45:56
Uptime 0 days 0 hr. 0 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sql-server-test.ie.local)(PORT=1521)
)(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
There is no sign of XE, XEXBD nor XE_XPT service.
I restarted installation and performed repair and everything went back to normal.
After repair
lsnrctl stat
is giving
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-RUJ-2009 23:11
:40
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR
_XE))(ADDRESS=(PROTOCOL=TCP)(HOST=sql-server-test.ie.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-RUJ-2009 22:45:56
Uptime 0 days 0 hr. 25 min. 44 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sql-server-test.ie.local)(PORT=1521)
)(OVO NE RADI) (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
After repair all is good but I must not restart server.
If I do this the story repeats itself.
No XE, XEXBD etc services, no access to database nor to homepage.
Starting install/repair - everything works. After restart same story again....
I could not find the way to aviod constant repair after restart.
Is there any way out of this?

Thank you for the response.
But the problem persist.
The lsnrctl dont recognise the XE service. The OracleServiceXE is up and running.
D:\oraclexe>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-OCT-2009 12:55
:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
tnsnames.ora
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
(SRVR = DEDICATED)
)

Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

Hi
The webcam is listed in device manager under the Imaging devices
There you should see USB Video Device.
If its not listed there, then I think that the device malfunctions or its disconnected.
The webcam is an usb device and its connected to USB controller.
I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
I such case the display lid needs to be disassembled and the cables should be checked.
In my opinion its a job for an technician.

ALV_GRID How to get number of lines after filted applyed?

Hi, all!
The task is to display title in alv_grid like
"N records selected (X records on the screen)".
It means, N records in dataset and X records displayed after filter applyed by user.
But i can't get number of lines after filter applyed from the alv_grid.
Can anybody help me?
Thanks & regards,
Konstantin

Hi,
If it goes through PBO/PAI cycle after user sets the filter then in your PBO call method get_filtered_entries of CL_GUI_ALV_GRID and then do a describe statement on the table.
Number of entries in your grid table - number of entries in this filtered entries table will give you the displayed entries after the filter is set.
If it does not go through PBO/PAI cycle then register for after_user_command and I think the fcode for filter is '&FILTER' and code for the above logic in your handler method..
Hope this helps..
Sri

Retaining the old schedule lines after the ATP check in the sales order....

Hi Experts,
I would like to retain the old schedule lines after the ATP/GATP check in the sales order for certain conditions.
I don't want to change XVBEP,IVBEP,VBEP contents in the user-exit..
Is there any standard sub-routine or function module to reatain old schedule lines in the sales order so that the schedule lines will not update with the new values after the ATP check ?
Thanks
Rayudu

In Include LV03VFMM, you have:
* Userexit availability
PERFORM USEREXIT_AVAILABILITY_IN USING DA_ATPPR.
There may be an option to implement some logic in here. However, I tried changing the value of MVERF_POS-EINTEIL[1]-VFPKZ to initial. This will ensure that when FM AVAILABILITY_CHECK_CONTROLLER is called that the following IF statement is untrue:
CHECK NOT P_ATPCSX[] IS INITIAL.
as P_ATPCSX[] Table[0x648].....
However, this will just mean that the 2nd confirmed schedule line (assuming we have > 1 schedule lines) will have a confirmed quantity to zero.
EXIT_SAPLATPC_001 could also be used. However, when I removed the "X" from CHKFLG, I get the same result; the 2nd schedule line will revert to zero.
They were the only tests I tried; I cannot think of any other ways around this....

Dell Latitude E6520 fails to boot after Windows Updates

Hello,
I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
a recovery disk and run:
dism /image:D:\ /cleanup-image /revertpendingactions
This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending:
kb2982378
kb2978742
kb2977629
kb2976897
kb2973112
kb2972211
There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
2014-09-18 10:52:04:214
496 540
AU Install complete for all calls, reboot needed
2014-09-18 10:52:04:216
496 540
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:623
496 8a4
AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-09-18 10:52:04:623
496 8a4
AU Triggering Offline detection (non-interactive)
2014-09-18 10:52:04:623
496 8a4
AU AU setting pending client directive to 'Reboot Pending'
2014-09-18 10:52:04:623
496 8a4
AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
2014-09-18 10:52:04:625
496 8a4
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:04:625
496 1668
AU #############
2014-09-18 10:52:04:625
496 1668
AU ## START ## AU: Search for updates
2014-09-18 10:52:04:625
496 1668
AU #########
2014-09-18 10:52:04:626
496 1668
AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
2014-09-18 10:52:04:626
496 166c
Agent *************
2014-09-18 10:52:04:626
496 166c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:04:626
496 166c
Agent *********
2014-09-18 10:52:04:626
496 166c
Agent * Online = No; Ignore download priority = No
2014-09-18 10:52:04:626
496 166c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-09-18 10:52:04:626
496 166c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-09-18 10:52:04:626
496 166c
Agent * Search Scope = {Machine}
2014-09-18 10:52:05:210
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:07:170
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:475
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:09:569
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:11:590
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:14:999
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:16:887
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:18:753
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:19:623
496 1668
Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
2014-09-18 10:52:20:673
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:573
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:22:773
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:464
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:24:651
496 1668
AU AU received handle event
2014-09-18 10:52:26:366
496 166c
Handler Using CBS interface ICbsSession7
2014-09-18 10:52:27:520
496 1668
Shutdwn user declined update at shutdown
2014-09-18 10:52:27:520
496 1668
AU Successfully wrote event for AU health state:0
2014-09-18 10:52:27:520
496 1668
AU AU initiates service shutdown
2014-09-18 10:52:27:520
496 1668
AU ########### AU: Uninitializing Automatic Updates ###########
2014-09-18 10:52:28:206
496 166c
Agent * WARNING: Exit code = 0x8024000B
2014-09-18 10:52:28:206
496 166c
Agent *********
2014-09-18 10:52:28:206
496 166c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-09-18 10:52:28:206
496 166c
Agent *************
2014-09-18 10:52:28:206
496 166c
Agent WARNING: WU client failed Searching for update with error 0x8024000b
2014-09-18 10:52:28:253
496 1668
Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
2014-09-18 10:52:04:216-0600 1
193 102
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdates
Success Content Install
Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates: - Security Update for Windows 7 for x64-based Systems
(KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
(KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
for Windows 7 for x64-based Systems (KB2978742)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:253
496 1668
Report CWERReporter finishing event handling. (00000000)
2014-09-18 10:52:28:425
496 1668
Service *********
2014-09-18 10:52:28:425
496 1668
Service ** END ** Service: Service exit [Exit code = 0x240001]
2014-09-18 10:52:28:425
496 1668
Service *************
Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.

Hi ChristianBoman,
We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
http://windows.microsoft.com/en-us/onedrive/share-file-folder
for the update error 0x8024000b, please refer to the following article.
http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
Please take the following steps:
1. Run the Windows Update Troubleshooter.
2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
3. Copy the following text, and then paste it into the Run text box:
Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
4. Click OK.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Print a line after each constructor

Would one of you java gods tell me how i can print a line after each constructor that tells me that the constructor has been constructed?
* Employee.java
* Created on April 28, 2007, 11:58 PM
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
* @author Pete Berardi
package edu.ctu.peteberardi.phase3db;
import java.util.Scanner;
public abstract class Employee extends Object
    protected String EmpName;
    protected String EmpAddress;
    protected String EmpSsn;
    protected String EmpEmployeeID;
    protected double EmpYearlySalary;
    protected double computePay;
    protected String Constructor;
    /** Creates a new instance of Employee */
    public Employee(String name, String address, String ssn,
            String id, double salary, double pay, String cvariable)
      name = EmpName;
      address = EmpAddress;
      ssn = EmpSsn;
      id = EmpEmployeeID;
      salary = EmpYearlySalary;
      pay = computePay;
    public void setEmpName(String name)
        EmpName = name;
    public String getEmpName()
        return EmpName;
    public void setEmpAdress(String address)
        EmpAddress = address;
    public String getEmpAddress()
        return EmpAddress;
    public void setEmpSsn(String ssn)
         EmpSsn = ssn;
    public String getEmpSsn()
        return EmpSsn;
    public void setEmpID(String id)
        EmpEmployeeID = id;
    public String getEmployeeID()
        return EmpEmployeeID;
    public void setEmpYearlySalary(double salary)
        EmpYearlySalary = salary;
    public double getEmpYearlySalary()
        return EmpYearlySalary;
    public void setcomputePay(double pay)
        computePay = pay;
    public double computePay()
        return computePay;
      public void setContstructor(String cvariable)
         Constructor = cvariable;
    public String Constructor()
        return Constructor;
   public static void main( String args[])
      System.out.print("Constructor has been constructed");

I do not know why you have declared the class as abstract. Abstract class must contain at least one abstract method.
In your code, there is no abstract method.
public Employee(String name, String address, String ssn,
            String id, double salary, double pay, String cvariable)
      name = EmpName;
      address = EmpAddress;
      ssn = EmpSsn;
      id = EmpEmployeeID;
      salary = EmpYearlySalary;
      pay = computePay;
      System.out.println("Constructor created");
     }The above code works only when you instantiate the object for the class. If it is abstract class, it will not work.
Abstract class cannot be instantiated.

SP 2010 - Getting "An unexpected error has occurred. " message when accessing Sharepoint site after windows update - Windows 7 Home Premium

Hi,
I am new to SP 2010. I have installed Share point 2010 server (trial version) on my Windows 7 Home Premium Laptop by following the below link.
http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
Everything went fine and was able to see the new sharepoint site after completing configuration wizard. SP2010 Central Admin also worked fine.
However, after windows update, sharepoint site is not working. I was able to see the site working for more than a day before windows update. SP2010 Central Admin is still working. Executed "PSCONFIG" after
update but still no good.
I saw a warning "The Security Token Service is not available" in Central Admin and did some research to fix the issue but nothing worked.
Hotfix
I believe I have all hotfixes mentioned in the forums. Here is the list.
Windows6.1-KB976462-v2-x64
Windows6.1-KB982307-x64
Synchronization
Windows6.1-KB974405-x64
MSChart
SQLSERVER2008_ASADOMD10
381569_intl_x64_zip
Windows6.1-KB976462-v2-x64
Event Viewer
I can see following log in Event Viewer when accessing site home page.
Event ID: 8306
Task Category: Claims Authentication
Level: Error
Website response
http://localhost:32843/ - "HTTP Error 503. The service is unavailable."
http://localhost:32843/Topology/Topology.svc - Works fine
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc - Returns following error. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security) and IIS website (SharePoint Web Services
-> IIS -> Authentication).
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
I even tried to uninstall Sharepoint and re-install the same. It worked even second time until it went thro' windows update. App pools are running and Websites are up and running in IIS.
Can anyone please help me to fix this issue?
Thanks

Hi Henrik,
Here is the log info.
<EventID>8306</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>47</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<Execution ProcessID="8436" ThreadID="8812" />
<Channel>Application</Channel>
<Security UserID="S-1-5-20" />
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal
Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px
4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;f'.
I would like to let you know that I am getting following message when accessing the below link. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security)
and IIS website (SharePoint Web Services -> IIS -> Authentication).
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
HTTP Error 500.0 - Internal Server Error
Module "WindowsAuthenticationModule" could not be found
Regards

Ipod touch 5th gen will not sync after windows 8.1 update

ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Line after window

Similar Messages

Maybe you are looking for