Line and paragraph spacing in pages 5.1

Line spacing in Pages 5.1 does not seem to be incremental any more and I cannot see how to adjust paragraph spacing at all. Any suggestions?? This is on a Mac using the

Thanks.
It is a layout problem that seems to be affecting most users.
There, but overlooked.
Hope the Apple programmers are paying attention.
I am really curious why they seem to be doing no independent testing and checking. At least none that shows.
Peter

Similar Messages

  • How to identify line and paragraph breaks on word enumeration

    Hi,
    I am using PDWordFinder to extract text from the PDF document and then enumerate each word.
    I need to identify the line breaks and replace them with white space
    and paragraph breaks should be replaced with "/r".
    I use the following to identify the line breaks
    (PDWordGetAttrEx(docWord, 0) & WXE_LAST_WORD_ON_LINE)
    Is there any way to identify paragraph breaks?
    Thanks in advance
    Vatspal

    Is the PDF tagged/structured or not?   If so, then you have all the
    paragraph information you need by using the PDSEdit APIs.  If not, then
    you will need to do MUCH MORE heuristic analysis of the content to
    determine paragraphs.

  • New owner here.  How can I select specific pages of a document found on line and print just those pages.  What I see is the ability to select only 1 page at a time and print that one selected page only.   Thanks much.

    New owner here.  I see that in printing I can select one page and print same.  How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time.  Thanks much

    Just change the range as illustrated below.  If you don't see that, click the Show Details button.

  • How do I change the paragraph spacing before and after paragraphs in Pages for iOS

    Being experienced in writing technical documents, I would like to know if there is any way I can setup paragraph styles with a specific spacing before and/or after paragraphs in Pages for iOS. You can do this in the normal Pages for Mac OS. Setting line spacing in Pages for iOS is not a very accurate way of formatting a document so that it looks good on a page.

    Hello James
    I have realised this, but this is a long winded way of doing things and inconvenient if you want to create a new document using an iPad. To me paragraph spacing is one of the essentials when creating documents. It makes a document more readable and look more professional. For Apple to miss this out of iOS Pages is a huge error. Pages should be similar across all platforms where you can use Pages which will greatly overall compatibility, especially if you are exporting to other formats.
    Regards
    Schof

  • Pages: My problem is cursor moves involuntary to a different paragraph or line;  and overshadow words

    My problem is cursor moves involuntary to a different paragraph or line;  and additional overshadow words

    You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.

  • Turn Off Auto format that drops last line of a paragraph to next page

    When I am writing multi-page papers, I will occasionally experience an auto-format annoyance where, if the paragraph I have written ends with just half a life of text on the next page, pages automatically drops the last full line of text down to the next page as well. I suppose pages does not want the short line to be lonely, but it leaves a large gap at the bottom of the page - particularly when the lines are double-spaced. I often have page limits on my assignments and am trying to squeeze as much in as possible int he space I am permitted, so losing these lines of text can be a great annoyance. How do I turn this feature off? Thanks.

    Welcome to Apple Discussions
    Walt

  • Getting paragraphs to begin a few lines from the top of page rather than at top of page

    Hey all,
    I have a master A page. It contains page numbering and a variable, which contains the chapter heading. It is directly within the top and left margin of the page. Now I want all the paragraphs of the pages to be a few lines below the page numbering. Yet, when I try to apply text wrap to variable or page numbering, it knocks the other out of place. If I only apply text wrap to bottom of variable or page numbering, then when text flows on new page, it will flow above the page numbering/variable because the text wrap only applies to bottom and not top of variable or page numbering. So I'm not sure how to address this issue. Thanks for response.
    Thanks for response.

    Here's the thing about the link being lost. I delete the spreads and then create new spreads off the master and now the textbox is positioned correctly with space above it. However, I can't just get the type tool and begin typing in the textbox. I'm forced to hit shift + apple  and drag over the box so I can begin typing in it. I think that's where the link is broken. So now later when I resize the text box in the master, it will not be reflected in any of the pages because I had to shift + apple them in order to be able to type in them. So how can I maintain the link to master while still being able to type into the text frame of any of the pages?
    Thanks for response.

  • How to I get on to page 2 when my document stops at the page 1 layout line and won't go on to another page?

    How to I get on to page 2 when my document stops at the page 1 layout line and won't go on to another page?

    Sounds like you are using a Layout template. These you have to manually link from textbox to textbox.
    Try using a Word Processing template, it lists them in the sidebar of the Template Chooser.
    Peter

  • Header and line item headings in new page in Sapscipts

    HI,
    In Main window, I am displaying the header details.
    In a box below, I am displaying its item headings and item data details. Now when the no. of line items exceed the first page, they are displaying in the second page with other windows, but the header details, box and the line item headings are not getting displayed in the next page.
    Can anyone help me How to get the box, line item headings and header data also in the next page..
    thanks in advance........
    Rakesh

    Hi Rakesh,
    The header details, item headings and the box are also in the main window, thus, if the items exceeded and a next page is triggered, it will still continue to display the items until the loop ends.
    what you can do is that you can make a separate /E elements for header details, item headings, box and line items. so if a new page is triggered, you can call again the elements for header details, item headings, and box, then continue with the line items.
    Thanks,
    M

  • TS1702 In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

    In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

    Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
    Have you tried quitting Pages completely and the restart the iPad?
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • I created a word document with hyperlinks. When my default browser is Chrome the hyper links work. When the default browser is Safari, the hyperlinks bring to pages that just lines and lines of symbols. I need these links to work in both browsers.

    I created a word document with hyperlinks. When my default browser is Chrome the hyper links work. When the default browser is Safari, the hyperlinks bring to pages that just lines and lines of symbols. I need these links to work in both browsers. Any ideas?

    version 10.6.8

  • Lines and Boxes in Pages. Please help!

    I created a poster in Pages and it is printing with all kinds of lines and boxes behind the text and images. When I go into the doc I do not see them there. Where is this coming from and how do I get rid of them?
    thank you!

    Thanks Jerry.
    Yes, I started with a Layout template. Yes, I did copy some text from Word - and this is some of the text with the problem so I will try deleting it and typing in the original text. But other parts that I am having problems with seems to be the previous boxes which were there as the template that I deleted - somehow their 'shadows' seem to still be there but only shows in print but not on my screen. If there is any other info I can provide to help you help me, please let me know!
    thanks again Jerry,
    Robyn

  • Open email, search for text, delete X number of lines and/or paragraphs?

    How would one go about this?
    I have existing code that uses the objActionsMenu.Execute to "resend" the message, essentially creating a new email that I can edit.
    I would like to be able to:
    1) Search for a keyword
    2) Move to the end of the line and/or paragraph
    3) Delete the contents
    The reason is that I often receive important emails with 50+ lines of names and email addresses on the "To:" or "CC:" lines. I want to quickly and easily remove these so I can get to the important part of the email.
    Am I going about it the right way? If so, how would I accomplish this? Thanks.
        

    How would one go about this?
    I have existing code that uses the objActionsMenu.Execute to "resend" the message, essentially creating a new email that I can edit.
    I would like to be able to:
    1) Search for a keyword
    2) Move to the end of the line and/or paragraph
    3) Delete the contents
    The reason is that I often receive important emails with 50+ lines of names and email addresses on the "To:" or "CC:" lines. I want to quickly and easily remove these so I can get to the important part of the email.
    Am I going about it the right way? If so, how would I accomplish this? Thanks.
    I think you maybe in the wrong forums :). This is for Excel and not Outlook. This is a general VBA question though. The easiest way to do this is the following:
    -Assign the content of the email body to a string variable.
    -Use the split function to split at the keyword, and keep the string portion BEFORE the keyword.
    -Assign the split string back to the email body so something like this:
    Public Sub ReplyWithAttachments() ' Ensure reference to Word Object model is set
    Dim rpl As Outlook.MailItem
    Dim itm As Object
    Set itm = GetCurrentItem()
    If Not itm Is Nothing Then
    Set rpl = itm.Reply
    rpl.BodyFormat = olFormatHTML
    rpl.display
    End If
    Dim objDoc As Word.Document
    Set objDoc = rpl.GetInspector.WordEditor
    Dim txt As String
    txt = objDoc.Windows(1).Document.Range.text
    txt = Split(txt, "To")(0) '
    objDoc.Windows(1).Document.Range.text = txt
    End Sub
    Function GetCurrentItem() As Object
    Dim objApp As Outlook.Application
    Set objApp = Application
    On Error Resume Next
    Select Case TypeName(objApp.ActiveWindow)
    Case "Explorer"
    Set GetCurrentItem = objApp.ActiveExplorer.Selection.Item(1)
    Case "Inspector"
    Set GetCurrentItem = objApp.ActiveInspector.CurrentItem
    End Select
    GetCurrentItem.UnRead = False
    Set objApp = Nothing
    End Function

  • HT1343 Error on Page: "Control-E     Move to the beginning of a line or paragraph" should be "Control-E     Move to the end of a line or paragraph"

    Error on Page: "Control-E Move to the beginning of a line or paragraph" should be "Control-E Move to the end of a line or paragraph"

    Apple - Feedback

  • Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical spacing?

    Ive been pulling my hair out on how to do this all day and im getting no where i dont even know where to begin! Please help if anyone knows how to do this.

    enforcer4u,
    she said posting here if help was needed was a good idea...
    This is Classroom in a forum.
    I believe the first line should have read Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical > horizontal spacing.
    One way (she may be following this thread, you know) would be to:
    1) create a horizontal/vertical (composition Three/Four) line with the Pen Tool with a length corresponding to the whole composition and two or more Anchor Points, ShiftClickDragging at each with different lengths of the Handles;
    2) Create a vertical/horizontal line by ClickDragging with the Line Tool (or just Click with the Line Tool and set the Length and direction, then move a copy (ShiftAlt/OptionDrag the original, start dragging a tiny bit before you press the keys);
    3) Object>Blend>Blend Options, set Spacing to Specified Steps, 38 steps;
    4) Select the lines from 2) and Object>Blend>Make;
    5) Select both the Blend from 4) and the line from 1) and Object>Blend>Replace Spine.
    Other ways include creating the first line and then ShiftAlt/OptionDragging to create the other lines up/down/left/right depending on composition, or creating or all the lines (maybe using the blend) and then ShiftClickDragging individual lines.

Maybe you are looking for