Line at the end of repeat subform

Hi Adobe experts,
I have got a situation where in the item table is a subform which i have made it with repeat subform
The columns of the item table are drawn by lines.
So for every line item,the horizontal line at the end of the table appears when the subform repeats.
I do not want the line to appear at the end of line item but only at the end of a page..
Is it possible to do so ? or we should change the design by using insert table
Please let me know your suggestions.
Thanks in advance
Regards,
Gowthami SK

Hello Varun,
The line is in the end of the subform ( Placed down ),the subform only is for the item table ,so if the line is in the subform ,as the items repeat,the line also gets repeated
I want the line only at the end of each page when the items get filled
Regards,
Gowthami SK

Similar Messages

  • Printing a Line at the end of a Repeating Frame in Reports 6/6i

    Hi Folks,
         In few of my designed reports I want a horizontal boiler plate line drawn at the end of the repeating frame on each page. The Number of Records property of the repeating frame is set to 0, i.e., depending upon the margin allocated on each page the report should fetch as many records as they can fit in the allocated area of the frame. I have also set the Page Protect property of the repeating frame to Yes, since we want the description of the records to be displayed fully on each page i.e., a record displayed last on a page should have its description on one page and it should not go to the next subsequent page. Now when I draw a horizontal boiler plate line at the end of the repeating frame in the Layout Model and set its property to Print on all Pages, the line in few pages of the report does not print at all and on the rest of the pages it is displayed at its correct position. I have even tried using an Anchor but it still does not work. Do I need to set the property of the anchor or am I missing some basic point here?
    TIA
    Hassan

    Hi there,
    I have tried that but when the records are less in number on a page i.e., 1-2 then the line do prints on each page but there is a gap between the line and the last record.I want that the line should print right after the last record. Should I use an anchor here? But we cannot use an anchor between a line and the margin.
    Any ideas??

  • Horizontal line at the end of page within for each

    I try to do the following with PO :
    When a PO lines take several page to print I want to draw a line at the end of the page.
    <xsl:for-each select=".//LINES_ROW" xdofo:ctx="3" >
    <fo:table-row keep-with-next.within-page="always" keep-together = "always" xdofo:repeat="R">
    <fo:table-cell keep-together="always" xdofo:use-attribute-sets="lc_4" >
    <fo:block xdofo:use-attribute-sets="lb_2 lb_5">
    <fo:inline id="Text12{$_XDOFOPOS}"/>
    <fo:inline id="Text10{$_XDOFOPOS}"/>
    <fo:inline id="Text11{$_XDOFOPOS}"/>
    <fo:inline id="Text5{$_XDOFOPOS}"/>
    <fo:inline xdofo:use-attribute-sets="li_1">
    <xsl:value-of select=".//ITEM_DESCRIPTION" xdofo:field-name="ITEM_DESCRIPTION"/>
    </fo:inline>
    >
    </fo:table-row>
    </xsl:for-each>
    Now when i reach the end of a page I can't draw a line is there a way to draw an horizontal line ?
    Thanks for the quick answer

    Did you ever get an answer to this? I have the same question.

  • How to add a new line at the end of eTEXT file

    Hi,
    I have modified the RTF template for the R12.1.3 Positive Pay File report (IBYPOS_PAY_en.rtf). Everything is good, except that the bank requires a "T" (Capital T) character in a new line at the end of the text file. Has any of you came across this before? How do I modify the template to achieve this?
    Thank you,
    Sinan Topuz

    I believe this is related to BI Publisher. Any comments would be greatly appreciated.
    Thanks,
    Sinan

  • How to draw horizontal line at the end of table for multiple line items

    Dear Experts,
                       Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
    Thanks
    Ramesh Manoharan

    Hi
       I tried as per your logic but it is not solving my problem .  when i am gone to table painter it is showing line type 1 and line type 2
      is below format.. if u see here line type 1 bottom line and line type 2 top line both are same..  so how to avoid this ?
                              line type 1
                             line type 2

  • My new version of Firefox (downloaded automatically) on my Mac displays long paragraphs in emails as a single line, so the end of the paragraph is off the screen. How can I make it automatically wrap to fit the screen?

    Long paragraphs in incoming emails display as a single line, with the end of the paragraph running off the screen. I want to make it wrap automatically to fit the screen.

    For the browser window, just drag it to the top left of the screen (click and hold on the top bar with the traffic lights to drag), then in the bottom right of the window you'll see a rectangle with diagonal hatching. Click and hold on that and drag the window to the size you want.
    Clicking on the green dot at top left will expand the window to fit the screen, clicking it again will shrink it back to where it was (this doesn't work in Finder windows quite the same).
    The menu bar size is set in the bowels of the OS, though there may be third-party applications which can alter it.
    As it's size is relative to the screen resolution, you could try reducing the resolution in System Preferences > Displays to see if that would suit you better.

  • File Adapter Write Operation inserts a new line at the end

    Hi,
    I am using the write operation in the File Adapter from BPEL Process. The data is written successfully to the file and file is also created in the location specified in the adapter wsdl. But in the file created, it creates a new line at the end of the file. This new line has to be avoided when writing data to a file.
    Has anyone faced this and solved this ?
    I am SOA 10.1.3.4.
    Cheers,
    - AR

    It is a bug in 10g and will be resolved in one of the versions of 11g.
    Cheers,
    -AR

  • Empty line at the end of  SAP Java instance profile

    I saw this today in help.sap.com, which says that an Java instance profile must have an empty line at the end of the file, would anyone know what is it for ?
    The instance profile (/usr/sap/<SID>/SYS/profile/<SID>_<instance name>_<hostname>) u2013 this file contains settings that apply to the instance as a whole. For a Java-only installation, the file can be edited with any text editor (beware that the file must have an empty line at the end.);
    http://help.sap.com/saphelp_nw04s/helpdata/en/2e/611724f410254ca12a3f396ec5ae85/frameset.htm
    thank you
    Jonu Joy

    I have heard many "explanations" for this, but never really any solid answers.
    From experience, however, I can tell you that the SAP profiles (both ABAP and Java) will miss the last parameter if it is located on the bottom line of the file.  I have always put in two or three blank spaces at the bottom of the profiles in order to avoid this.

  • How to show an empty line at the end of a ParagraphView

    Hi everybody,
    I wonder if anyone knows how to extend ParagraphView to show an empty line at the end of every paragraph?
    Thanks in advance,
    mrai

    I tried to use that class and couldn't get it to work.
    JTextField field = new JTextField();
    field.setText("blah blah");
    CompisiteView view = new ParagraphView(field.getDocument().getRootElement());
    int views = view.getViewCount() //always zero...

  • Out-file to a line not the end

    Hi guys,
    I have a script problem I'm trying to resolve. I want it so that a user can edit a single line of a txt tile. Is this possible using the out-file command?
    "out-file 'C:\temp.txt' -append -inputobject $user_input"
    This will add the line to the end of the file, but that's not what I want it do. Suppose I have a text file that looks like this.
    1.Hello
    2. Dad
    3. Mum
    and I want to edit it so hello is now bye. Why can't i just do:
    "out-file 'C:\temp.txt'[0] -append -inputobject $user_input"
    When I run this nothing happens. Any ideas?

    The heading and content description is little confusing
    are you looking for code which write on top of the line
    Eg:
    Line1 - This is user input value
    Line2
    Line3
    $content = Get-Content C:\Temp\See.txt
    $userinput = Read-Host 'User Value'
    $userinput | Set-Content C:\Temp\See.txt
    $content | Add-Content C:\Temp\See.txt
    Note: As
    Gareth Fletcher<abbr
    class="affil"></abbr> suggested it's not possible using Out-File
    If you want to replace as you mentioned in description you can use Venu's code
    Regards Chen V [MCTS SharePoint 2010]

  • SMS Messaging: Blank line at the end of the message

    I never had this problem with the 3G, but on my iPhone 4, I often see a blank line at the end of my text message after I send it.
    Also, a similar issue I am having is that while I am drafting text messages, the words fits nicely in the text input box, but once I hit send, some words are shifted to the next line.
    *Typed in input box:*
    Sorry. We'll be there asap.
    *Show in the green bubble:*
    Sorry. We'll be there
    asap.
    Anyone know how I can solve this problem? Thank you!

    this isnt the way to respond to someones problem... thats not what this forum is for ..
    now to the op have you tried resetting your phone by holding both the home button and the sleep/wake switch for 15 seconds...
    if that doesnt work I would try restoring your phone from backup to see if you can clear this issue up

  • How to compare and copy the fields from repeating subform to another subform, same structure.

    Dear All,
    I am using LiveCycle Designer 8.2.
    I have the following requirement, and did not figure out the best way to implement it using JavaScript.
    The Form has, say, Subform A with Repeating Inner Subform, say it has the Education History of the Staff.
    I want to put another Subform B, with similar structure to From A, and create a button/function to copy the field data values from A to B.
    Subform A will show the user the fields of education with Read-Only Mode.
    Subform B will show the user the same data values with write-enable mode. This subform will allow the user update his Education Records.
    The fields are:
    0. Staff ID: Text (Key 1) (always read-only and hidden, becuase it is on the main form),
    1. Degree: Text,
    2. Specialization: Text,
    3. Institution: Text,
    4. Start Date: Date (Key 2),
    5. End Date: Date.
    Another function is needed is to compare the same records between form A and Form B.
    (Note: The Education record of a Staff has primary key of Staff ID and Start Date. Meaning, the Staff cannot have tow different degrees in starting on the same date.)
    The user may change the Institution in form B or change the Degree. I need to highlight, on Subform B, the row which was changed or added by the user. This means I need to do lookup against Subform B using the Key Values from Subform A.
    I have already developed the Form, and I have about 5 Subforms to allow updated by Staff: Education, Experience Inside the company, Experience Outside the company, Job Skills, Membership Record, ..etc. One thing I did is that the Field Names I used in Subform A are not the same of the fieldname in Subform B, but the have same suffix, and different prefix. For example, for the Education:
    Subform A - Original Values:
    1. Degree: OrgDegreet,
    2. Specialization: OrgSpecialization,
    3. Institution: OrgInistitution,
    4. Start Date: OrgDateStart (Key),
    5. End Date: OrgDateEnd.
    Subform B - Updated Values:
    1. Degree: UpdDegreet,
    2. Specialization: UpdSpecialization,
    3. Institution: UpdInistitution,
    4. Start Date: UpdDateStart (Key),
    5. End Date: UpdDateEnd.
    I understand if the Key field is updated, then it is like it was deleted, and added a new one.
    I know how to do that in ASP.NET, but need help in Adobe LiveCycle using JavaScript.
    Please help me to write these two functions, as they are very urgent requirement.
    Tarek.

    In the event Exit of the 1st subforum.invoice you will find the code to assign the value to it's "brother" on page4.
    Also, on the add button i added the code to add a record to the page4 subforum.
    To make this work you will have to copy/past the code of the exit event to all fields you want to copy and in the xfa.resolvenode("XXXXXXX[].fieldName") command replace fieldname with the actual name of the field you're at.
    I didnt't do anything to te remove line button because i don't know how you want it to work, but, if you want to control the p4 subform with the p1 subform, you shouldn't allow for lines to be removed directly in the p4 subform.
    Hope this helps.

  • How to find end of the Page in Crystal ? or I need to add one Horizontal line at the end of the page.--- URGENT HELP NEEDED

    Hi friends,
    I need to add one horizontal line  for the detail section at the end of the page.
    I tried to put that line in page footer and i tried with Box also. Both are not properly working. Some space problem is coming.
    Is there any feature to find end of the Page.
    I want report format like this.
    set id  |  set name |  date  Name
      1         x           dddd   vijay
                            dddd   sarathi
                            dddd    reddy
    (End of the page)
    Thanks in advance...
    vijay.

    Do you know how many detail records are showing up per page?
    If you do - you could create a Details B section that is suppressed except for on Record N (where N is a counter, and N is the last Detail record that will show up on a page).
    The Page footer is indeed built so that it will be rendered at the bottom of your physical page of paper.

  • Empty lines at the end of the payload generated in FTP server

    Hi All,
    I am facing an issue in one of the use cases that I am trying to implement.
    I am getting a purchase order from one of the trading partners through Oracle B2B.
    B2B forwards this B2BM (B2B message ) to AIAB2BInterface. From AIAB2BInterface my BPEL process gets invoked, which in turn invokes the AdapterComposite which has a FTP adapter that writes the purchase order to a FTP server. PFB the end to end flow.
    PurchaseOrder from ABC trading pertner--> Oracle B2B --> AIAB2BInterface --> TestInputProvABCS --> TestInputAdapter -> Host trading partner picks up the file from FTP location
    In the ProvABCS I retrieve the actual payload from the B2BM and convert it into a string using ora:getContentasString. I am then invoking the adapter composite and sending the string as the input to FTP adapter. At the adapter composite I use a simple native schema (for validation of the input string) which has only one element PO_Info of the type string. But when the file gets generated in the FTP server there are empty lines and junk characters at the end of the file.
    Need some advice on this. Why are the empty lines coming in the end of the file? Please help!
    Thanks

    OK, I cannot figure out a way to modify the JTable (in an extended class) directly.
    So, what I did was to add a wrapper around the TreeTableModel which shows an empty row at the end.
    For those of you who are in a similar situation, the methods that I had to modify are
    public boolean isCellEditable(Object node, int column);
    public int getIndexOfChild(Object parent, Object child);
    public int getChildCount(Object node);
    public Object getChild(Object node, int i);
    These other methods are required if you are using a TreeTable instead of just a table (see http://java.sun.com/products/jfc/tsc/articles/treetable2/index.html)
    public Object getValueAt(Object node, int row, int column);
    public Object getValueAt(Object node, int row, String columnName);
    public void setValueAt(Object node, int row, int column, Object newValue);
    public void setValueAt(Object node, int row, String columnName, Object newValue);
    The signature of above methods is slightly different than the ones at: http://java.sun.com/products/jfc/tsc/articles/treetable2/src/TreeTableModel.java
    This is due to the fact that, if you want to display the serial no. (as in row number), then getValue() can just return the row number. IndexedTreeTableModel is another wrapper around the TreeTableModel which can add an extra column to display the serial number.

  • Extra line at the end of file when transferred from XI to FTP.

    Hi All,
    Need help regarding the below query.
    I have an inbound structure with the below format
    MT_RAVE_L                     1..1 (is the main node)
          Logistic Info                 1..Unbounded (this is the structure under the main node)
                   LOGSOPTUN      1..1 (this is below Logistic Info field)
          File_Name                   1..1 ( This is also below main node with the same level of Logistic   Info structure)
    (Tried to insert a pic of the mapping but was unsuccesful)
    We are trying to move a file from XI to FTP. the file is being created in FTP succesfully but an extra blank line is being inserted at the end of the file.
    After lot of investigation we could trace the it is because of the File_Name field data is being not moved to inbound file.( Here we are using the File_Name field data for creating a file name in FTP. i.e., the File_Name is the File name under which our data is being stored in FTP and that is the reason we are not using File_Name in Content Conversion)
    Can you please suggest ways so that the empty line is not created.
    Thanks in advance
    LRK.

    Hello,
    Have you set the property in  File adapter lastFieldOptional.
    Thanks and Regards
    Hemant

Maybe you are looking for