Line Chart Formatting

Hi All,
I have created a line chart with 3 series. I have two questions :
1. My X-Axes brings back 96 rows to display but the only way to see all data is if I use a scroll bar on this axis. I have tried to increase the chart width from 700 to 1000 but this does not have the desired effect. Is there a way to display my data without using the scroll bar ?
2. Is it possible to have the area within a given series line to be shaded in a certain colour so that it is more visually effective ?
Thanks
Edited by: Billy on Aug 24, 2011 2:12 PM

Hi Shane,
The reason you don't see the "Show Scrollbar" option for your chart is because scrolling is not currently supported by HTML 5 charts, and so that option is not visible on the Chart Attributes page when you edit your chart.  See the section HTML5 Migration Guide in the AnyChart online documentation for the list of supported features.  Note that the scrolling option is listed as "zoom panel", because scrolling is controlled via the <zoom> tags in the chart XML, as outlined in the Zooming and Scrolling section of the AnyChart documentation.
So until AnyChart provide support for scrolling with HTML 5 charts, you'll need to use the Flash chart option.
Regards,
Hilary

Similar Messages

  • Web I line chart formatting

    hi all, I am trying all my best for webI line chart formatting but I don't see much options, quick question is there any button or tool box for formatting  WebI line chart except properties tab???
    and my requirement is, usually when i turn  table to line chart by default  X-axis will be lower side and Y-axis will start from left end of X-axis and stand perpendicular to it. But what I need is X-axis should remain same but Y-axis should start from right end of x-axis.
    In short and clear Point of intersection of X and Y axis is left end of x-axis but I need point of intersection should be right end of X-axis line. are there any formatting tips???

    Hi,
    Follow the below steps.
    1) Create a dummy measure variable with name  ' (Comma) and formula value is =0. (Variable name is ' because if you put any other name that will come  in the Legend and its a dummy objects)
    2)Select the bar and line graph and put the dummy variable in the Y axis and Y axis value in the Z axis.
    3) After that no value  will show in the Y axis and your Z axis value show the line graph.
    Hope this will help you.
    Thanks,
    Amit

  • Line Chart - Formatting more than 4 lines in line chart

    Hi,
    How to format more than 4 lines in line chart using Crystal report Designer as by default it will display 4 lines in design mode.
    Able to format 4 lines but i have to display total 6 lines.
    Urgent. Please help....
    Thanks,
    ThakurS

    Hi,
    The design mode is not the right place to edit lines, bars etc for Charts.
    You can select individual lines from the Preview Mode and edit them.
    Hope this helps!
    -Abhilash

  • Line Chart Formatting in HFR

    I am using Financial Reporting for HFM and need a few line charts. I have to display the values of the respective points on the line chart which I did using the display point values checkbox in the Format Chart. However, the values are in $ or % and those prefixes ($, % etc) are not showing up on chart values(just displaying numbers which are rounded without any decimal places). I have formatted the grid where the chart is fetching its data but that is not helping. Anyone has any idea, how this can be done. Please help.

    Hi,
    The design mode is not the right place to edit lines, bars etc for Charts.
    You can select individual lines from the Preview Mode and edit them.
    Hope this helps!
    -Abhilash

  • Simple line chart formatting problems

    I am using the Visual Studio 2008 version of Crystal reports. I am trying to chart the maximum, minimum, and today's prices for natural gas. I have a sql view to that returns 48 rows of data. I want the legend to be MIN. MAX, NOW and the colors to be  green for MIN, red for MAX and blue for NOW.
    I can not set the legend test, the line color and the x axis labels are not readable. Any suggestions would be helpful.
    This is a example of the data:
    dtContract    Now    MAX    MIN
    5/10    3.975    6.207    3.869
    6/10    4.064    6.307    3.965
    7/10    4.185    6.419    4.082
    8/10    4.28    6.507    4.163
    9/10    4.332    6.56    4.207
    10/10    4.447    6.667    4.314
    11/10    4.827    6.997    4.676
    12/10    5.247    7.387    5.096
    1/11    5.464    7.597    5.316
    2/11    5.433    7.597    5.283
    3/11    5.343    7.427    5.172
    4/11    5.153    6.907    4.947
    5/11    5.17    6.887    4.946
    6/11    5.222    6.977    4.988
    7/11    5.289    7.077    5.053
    8/11    5.341    7.152    5.105
    9/11    5.371    7.182    5.138
    10/11    5.47    7.262    5.235
    11/11    5.722    7.502    5.492
    12/11    6.022    7.797    5.792
    1/12    6.225    8.002    5.995
    2/12    6.167    7.997    5.952
    3/12    5.995    7.767    5.77
    4/12    5.555    7.144    5.335
    5/12    5.555    7.102    5.325
    6/12    5.598    7.182    5.368
    7/12    5.658    7.277    5.428
    8/12    5.711    7.347    5.478
    9/12    5.744    7.377    5.513
    10/12    5.842    7.457    5.613
    11/12    6.082    7.689    5.856
    12/12    6.347    7.979    6.129
    1/13    6.548    8.184    6.333
    2/13    6.503    8.179    6.298
    3/13    6.304    7.949    6.088
    4/13    5.844    7.264    5.621
    5/13    5.821    7.219    5.586
    6/13    5.866    7.304    5.636
    7/13    5.934    7.399    5.706
    8/13    5.989    7.469    5.761
    9/13    6.024    7.499    5.796
    10/13    6.124    7.584    5.906
    11/13    6.364    7.829    6.151
    12/13    6.629    8.119    6.421
    1/14    6.829    8.324    6.626
    2/14    6.789    8.319    6.586
    3/14    6.584    8.079    6.381
    4/14    6.104    7.399    5.901

    Found another work around.

  • Webi Line Chart to Start from Axis Origin

    Hi,
    Need a quick help in BI4.0 webi line chart formatting.
    I have datetime on x-axis and cash flow on Y-axis.
    Say my cash flow starts at 9am on a day with $100 , my line chart starts the plot from 9am i.e. (9am,$100)
    instead I want the line plot to always start from (0,0)
    This is probably a chart option, but i dont find it.

    Hi Thangaraj,
    I have a similar requirement for a line chart to start from 0,0. while its min value is greater than 0.
    We are on BO 4.1 SP4  and there is no direct chart option for this.
    I would like to know whether you were able to achieve this in web intelligence.
    I really appreciate your reply.
    Thanks,
    Sri

  • How to convert from line chart data to CSV format

    Hi ,
    I am using Flex 3 and AS.
    I am getting data from MS SQL and display the data as line
    chart this is ok.
    But i want to convert this line chart data to CSV or .xsl
    format.I find one example in fourms the from data grid to CSV
    For this URL is
    http://www.abdulqabiz.com/blog/archives/flash_and_actionscript/datagriddataexporter.php
    But i want Line chart to CSV.Please help me.

    Line chart is a just a visual representation of some data
    that's sitting in your database. Isn't it? You load this in Flex,
    probably using HTTPService class, and pass it to some chart object.
    Now when use says that she needs it in CSV format, you're
    gonna have to send another request to the server to produce the
    same data, convert into CSV or XLS format and let user download it.
    Of course, if use doesn't want to download, you don't have to
    go to the server, at least for CSV format. You can convert the same
    data that used plot the chart to convert to CSV.
    Am I missing something here?
    ATTA

  • How to use custom function for formatting the Line Chart Axes?

    Hi...
    I'm using a Line chart who's y axis value range from 0 to 50000. This is a number which it gets from it's dataProvider. I want to format this and show it as
    $50,000
    $40,000
    $30,000
    $20,000
    $10,000
    $0
    instead of
    50000
    40000
    30000
    20000
    10000
    0
    Here's my linechart code:
    <mx:LineChart id="revTimeLineChart"
                width="100%" height="100%"
                showDataTips="true" >
                <mx:horizontalAxis>
                   <mx:CategoryAxis id="lcCatAxis" categoryField="name"/>
                </mx:horizontalAxis>
                <mx:series>
                   <mx:LineSeries id="ls" yField="revenue" displayName="Revenue" showDataEffect="{slideIn}"/>      (yField is what I want to format....)
                </mx:series>
    </mx:LineChart>
    Can you please let me know how can this be achieved?
    Cheers!
    Deepak

    Hi,
    You could do something like this,
    http://www.codersrevolution.com/index.cfm/2008/10/14/Flex-Charting-Format-your-X-and-Y-Axi s
    hope it helps!
    Regards ,
    Bhavika

  • Line Chart - date format

    Hi,
    i have some troubles with a "normal" line-chart. (graphType="LINE_VERT_ABS")
    The data is something like that:
    xvalue           yvalue
    01.01.2006     100
    02.01.2006     101
    03.01.2006     102
    04.01.2006     101
    01.02.2006     102
    02.02.2006     102
    03.02.2006     101
    01.03.2006     100
    02.03.2006     99
    03.03.2006     101
    I define the chart with:
    groups="xvalue" dataValues="yvalue"
    worked fine, BUT:
    I had to change the date-format from dd.mm.yyyy to "only" mm/yy.
    Now just 1 yvalue of every xvalue-group is displayed - the chart has only the following points:
    xvalue          yvalue
    01/06          100
    02/06          102
    03/06          100
    Does anybody know a solution where every point is shown just with the other date-format?

    Change your default system date format.

  • Line chart with mutiple value formats

    Hi,
    I have a chart built with Crystal Reports 2008 with two column lines.  One of the lines represents Quantity and the other line represents Percentage.  I set two Y axis (Y1 for Quantity line and Y2 for Percentage) for the two lines.  My problem is that when I set one of the lines' value format as Percentage, value format of both lines become percentage.  I cannot set one of the line value formats as percentage and the other one as number.  Would you please advise how I can set one of the line's value format on the chart as numbers and the other one as percentage?
    Thanks,
    Al

    Hello Al,
    How exactly are you setting one of the lines' value format as Percentage?
    And what are you setting it to be a percentage of? or are you trying to dsiaply one series data labels with a percentage symbol?

  • Formatting of vertical Line chart

    Hi,
    Does anyone know why the last element on a LineChar,t when
    the form is vertical, does not get displayed correctly?
    It seems to get partially displayed as a very thin vertical
    line.
    Thanks.

    Hello Greg,
                         Yes you are correct i want the  combination of Line Charts with  bar Charts on top .Let me know if you need any further details on it.I have the picture but I cannot share with anyone  due to right's issue.
    Regards
    Kalavati

  • Crystal report -How to display multiple lines in line chart?

    Hi,
    M struggling to display multiple lines in line chart. All the values m fetching it from database into data table in below format & data type
    Category(String).....year(Int).....graph_values(Int).....table_value(String)
    Test.........................2006.......... -100............................(100)
    Avg..........................2006..........20................................20
    Median......................2006...........5................................5
    Test..........................2007...........500.............................500
    Avg...........................2007............90..............................90
    Median.......................2007............45..............................45
    M using cross tab to display data and chart to plot line. Following fields I used in Cross tab Expert & Chart expert
    Cross tab expert-
    Rows u2013 category
    Columns u2013 year
    Summarized fields u2013 Min of table_value
    In Chart Expert u2013
    On Change of - Year
    Show values - graph values
    In cross tab m able to see the data properly but not in graph.I have three categories. Hence it should plot three lines in line chart but m able to see only one line for test category.
    FYI u2013 using VS 2008 and crystal report assembly version 10.5
    Urgent. Please reply soon.
    Thanks
    ThakurS

    I got the solution.
    In Chart Expert - I should use
    On Change of -- Year, Category
    Show values -- graph values
    Thanks,
    ThakurS

  • How to limit data range in a Line chart with Time Refresh Control

    Hi All,
    I have a Line chart with Time Refresh Control and I would like to make some constraints to this navigation.
    For example, I would like to limit the user to navigate in a data range of 8 hours.
    Is this posible?
    Thanks in advance

    Hi Pedro,
    as far as I know, this is not possible using the time controls on an iChart. However, you may have some success by using your own time controls which call JavaScript methods exposed by the applet.
    For example, you could begin by hiding the time and calendar buttons on an iChart, and creating some buttons of your own. For instance, to set the start date of a query (and thus the start date of the iChart using the query), you can use the following:
    document.getElementById("appletID").getQueryObject().setStartDate(<date string>);
    Using code like the above (look into the xMII script assistant and documentation), you should be able to build time controls which satisfy your requirements. The exact format of <date string> in the sample above will depend on the date format defined in the query template this script calls.
    Hope this helps,
    Sascha

  • How to thicken the line in Line Chart?

    Post Author: leongcy23
    CA Forum: Charts and Graphs
    I created a line chart and everything is smooth. But there is one thing that I'm not satisfied, which is I can't thicken the line of the chart. I try to look for Help, but it didn't show anything. From what I explore and try, I only can enlarge the marker, but not the line.
    And another issue is, can I choose the color for the line? Because the report will auto generate the line with color that is not clear which is yellow which border me so much. I wonder is that I can choose the color of the line.
    I really appreciate for someone that offer help. Thanks
    Anson

    Post Author: rcoleman
    CA Forum: Charts and Graphs
    What version of Crystal are you using? I can click on the line to highlight and then right click to get the option to format line. You can then choose color and line thickness. I'm using Crystal XI. It may take a few trys to highlight the line.. you have to hit it just right but I can't imagine this wasn't available in earlier versions.

  • Horizontal Bar Chart and Overlaying Line Chart

    I am using SSRS 2008 and developing my reports in BIDS.
    I have a report with two data points. I want to chart the first as a bar (horizontal) chart and then the second as an overlaying line chart.
    I created both data series, originally, as a bar chart. I have clicked on the second series in the "Drop Data Fields Here" area and changed the chart to a line chart. When I do that, it changes both series to a line chart.
    However, if I use the column (vertical) chart for the first series, it will let me make the second one a line chart.
    Is this a limitation of SSRS 2008? Can I not have one data point be the horizontal bar chart and the second one a line chart?
    If so, are there any suggestions how to get around this?
    Thanks.

    Both charts for SSRS 2005/2008 are very limited when it comes to horizontal charts and are infact supporting only left-to-right bar charts, with no ability to combine them with other charting types (lines, areas, points etc.). For a SSRS charting solution that supports all types of charting type combinations in left-to-right and right-to-left horizontal fashion you can use Nevron Chart for SSRS - www.nevron.com. Besides a huge number of charting types and subtypes (most of which are not available in the MS Chart for SSRS 2008) it also provides better image quality in 2D and 3D modes, more settings, has support for rich text formatting in texts, has image filters, ability to customize via C# code and implements many more large and small charting related details.
    Best regards,
    Crank

Maybe you are looking for