Line Format in Chart

Is there a way or work around to create a dotted line (constant value or limit) on a combination chart? This would be used to indicate a minimum limit.

Hi Chris
Sorry, but the easy answer's No.
The only workaround I can think of, and this is a really really poor workaround is to use one of the text components full of full stops and place it over the chart at the constant level. Like I said it's poor
Thanks
Charles

Similar Messages

Web Application Designer: Change Table Chart to Line Format

Dear Experts,
We, as novices of the web application designer, encounter a problem in using this program. After having created a Chart table, we cannot changed it to the line format.
The things that we perform are as follows:
1) Right click and choose lines format
2) Give it all titles
3) Click Next until finish
However, the result is still the chart table. Is there anyone who kindly give me steps of how to change it.

Hi,
Please try the following:
1. Highlight the chart.
2. In the Web Item Properties for chart, go to Edit Chart.
3. Click on the ... incon
4. Pick Lines
5. Pick a type of Lines graph.
6. Follow the wizard to change the required properties.
This should work for you.
Regards,
Xibi

How to draw a straight dotted line on Bar chart at 70%?

Hi
Could you please let me know how to draw a straight dotted line on BAR CHART at 70%?
Thank you

Hi,
This may vary depending on what version of crystal you are using.
Right click on the graph & go to 'chart options' & choose 'Grids'
In the grids pane go to the grids tab. From there check the 'draw custom line at' and specify where you want to draw the custom line.
Once the line is drawn highlight the line, right click and go to 'chart options' & 'selected item'.
select what format you want the line to look like (choose the dashed one).
good luck!

Seek 2D Line and Bar Chart Graphs HOWTO

Can anyone share with me on where I could obtain/teach
me how to write 2D Line and Bar Chart Graphs ?
I like the class/program to be called from java code and not
from command prompt to plot points or bar graphs.
Please, no vendor recommendations.
I dont have the $ to purchase.
Any help is appreciated.
Thanks

I checked the web site of JFreeChart and its document
says to get premium service, it requires $.
I dont really have the $ to purchase that software.
It's a vendor product!Just to clarify, JFreeChart is free software, it is licensed under the GNU LGPL. You get the complete source code, including lots of demos, Javadoc HTML pages, an install document in PDF format, and access to the support forum for absolutely no charge. You don't have to pay a fee to unlock special features in the software, everything is there in the free download.
As a way of funding the project, we sell a JFreeChart Developer Guide which includes a lot more information about using JFreeChart. But it is only the documentation we sell, not the software.
Hope that helps,
Dave Gilbert
JFreeChart Project Leader
http://www.object-refinery.com/jfreechart/index.html

Custom Formatting Of Chart Legends

I've been playing with Flex Charting, and I have lots of nice
looking graphs that I've created from database feeds. However, what
I really want to know how to do is format the chart legend better.
For example I have a pie chart that has about 50 different data
items/series and the legend is huge in either horizontal or
vertical mode it prints all the way down the page. How can I make
it two, three or more columns?

Hi Justin,
I think, there is no way to do such a customization with the standard Javadoc (i.e. powered by the Standard Doclet).
After all, the job of the standard Javadoc is doing standard (general) things and I just cannot imagine any general rule (setting or option) that would embrace all kinds of possible customizations about displaying of annotations.
So, the only way in your situation would be to modify the doclet itself. You can try tweaking the standard doclet: overload some its classes or change sources (according to the license they provide). However, I just can say, that way proved to have lots of limitations.
Fortunately, I could suggest you a different rote that would allow you solving your problem in a few minutes. We have a product called "DocFlex/Javadoc":
http://www.filigris.com/products/docflex_javadoc/
This is a highly customizable Javadoc doclet. More exactly, this is a system for rapid development of professional quality doclets (with the support of both framed/single-file HTML and RTF output).
With that tool, the generation of every sort of Javadoc output is programmed in special templates (using graphic Template Designer). The product is provided with the "standard template set" that generates the HTML Java API documentation very similar to the standard Javadoc.
In fact, to solve you task, you will need to modify a subtemplate called "annotations.tpl". See on this page: http://www.filigris.com/products/docflex_javadoc/templates.php
If you are interested about all this, we could help you to modify the necessary template absolutely free. Then, you will need only to buy a full product license to have everything work without limitations and that will be all!
So, if you are interested, please let us know by sending a e-mail to the address found on this page:
http://www.filigris.com/company/contact.php
Regards,
Leonid Rudy
http://www.docflex.com

Saving in Excel formatting the charts. please help...

Post Author: ranjan.sahoo
CA Forum: Deployment
Hi,
while i am trying to save the charts in Excel,its showing a deviation from .rep to .xls.
Description about Chart:- Chart is like in Y axis we have percentage like 60%,80%,100%, in X-axis we Received Week.
The Issue- Excel is automatically making an increment of unit length like its taking upto 120% as max.
Also Excel is automatically formatting the legend making it TOP-BOTTOM rather LINERAR as in >rep file
I have tried with all kinds of formatting in charts but its not reflecting. If you can help, I will be very helpfull.
Please help me.
Thanks,
Ranjan

Post your question on the MS Mac forums as it's their software you're having issues with: http://answers.microsoft.com/en-us/mac?auth=1

Line Time Series Chart not working

Hi All,
I have one Line Time Series chart where on the X Axis i have taken one date and on Y axis one Sales Figure.Now on the Measure Lables i have taken on dimension as Customer.
So the chart will give me something like trend which customer has how much sales figures daywise.
Now the issue is that it shows the trend for one customer correct and shows the line but if i select second customer the graph doesnt show the line just dot for the second customer.
Any help in this regard

Thanks Vinod for the reply.
Second customer doesnt have data on consecutive days but there is no pattern in that.He has data on 3rd,7th,8th,10th,15th day.
But for all these days for the second customer dots are coming but not in the case for First Customer.
Regards

Any Way to Change Thickness of Connector Lines for all lines of a Chart?

Post Author: ScottL
CA Forum: Charts and Graphs
Hi All,
I am trying to change the thickness of a Chart's Connector Lines for all lines of a chart and cannot find a way to accomplish this. I can go into Report Preview and individually change the thickness one at a time, but what if I do not know how many lines I will have (as in a Line Chart) ? I can't find a way to do this through Crystal Reports XI.
Many thanks in advance!
Scott

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Need help in Line bar combo chart - line is not prominent in dashboard

Hi All,
I face an issue where the line in a line bar combo chart is not prominent in Dashbords.
lets say i have 5 reports (all of them are line bar combo charts) in a dashboard. The lines in graph are not prominent or not displayed in usual thickness. But this scenario does not happen always. if i scroll down or up the browser(here i am using IE8) some of the reports displays line in the charts and some does not display the line. when i click on the report then the line will be displayed.
please suggest whether this is a browser issue ror something to deal with OBIEE itself.
Thanks in advance.

Hi,
It's a bug in obiee11g. kindly download the patch file from My Oracle Support and delpoye it
OBIEE 11g: Line Bar Combo , With Stacked Chart , The Bar Width Gets Affected [ID 1369493.1]
Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Symptoms
When the chart type is changed from Standard or Default line-bar to Stacked line-bar chart, the bars are reducing their width.
Line-bar should keep the width of the previous bars.
However, when vertical Bar is changed to stacked vertical, the bar width remains the
same. But when a regular Line-Bar is changed to stacked vertical, the width
changes (reduces, in this case it becomes half the original width)
Cause
For dual Y stacked bar graph, the bar width was half of the regular bar width
because the series assigned to Y2 was given the half of the space also. This is not needed if the marker type for Y2 is not bar.
The following bugs have been opened to handle this issue
Reference Bug:
Bug 12931660 - line bar combo with stacked chart changes its width
BUG:12931660 - LINE BAR COMBO WITH STACKED CHART CHANGES ITS WIDTH
BUG:12947990 - BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Bug Ref:
e.x: applying patch file refer the below file
http://obieeelegant.blogspot.com/2011/11/how-to-apply-patches-using-opatch.html
Thanks
Deva

Adding a Goal Line to a chart in Webi

Post Author: geozuh
CA Forum: WebIntelligence Reporting
Does anyone know how to add a goal line to a chart created in WEbi? It seems like this would be a standard option.

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
geozuh,
You would think that adding a goal line to a WebI report would be an available option within the software package, but it is not (but this sure sounds like a viable enhancement, so hopefully some of the Business Objects Enhancement Gurus are listening in).
It should be possible with a bit of fiddling with data in your database to create a "reference-type" table that could mimic all of the data values present but you would "plug" a metric-type column with the goal. For instance, on your bar graph you have x and y coordinates. The x could be the total sales by year, the y is the items (I know, I should be using an example from E-Fashion, but I'm not up-to-speed on it). In your "reference-type" table you would replicate all of the year and item data and create a new column (perhaps called "goal") which you plug with the goal value. In your universe you can link the two tables and when the report runs, voila you have all of your data. Now you can use the "vertical bar and line" graph to plot your old x and y and use z for the goal. Just a thought, and I know, "it's the long road to China", but hopefully you've got some ideas to tool with now.

Date format in charts

Hello,
is it possible to change the date format in a chart?? Example: From 'dd.mm.YYYY' to 'dd'
Edited by: Gerrit Lober on Jun 25, 2008 2:21 PM

Hi
No it is not possible to change the date format in Chart
Bcos the chart displays the values or the date from the report.
If you need to change the display in chart then Display in the report should be changed.
Regards
M.A

Adding Threshold line in column chart

Hi All,
Is there any way to show the threshold line in column chart? This is a high priority requirement in my project. Any kind of help is appreciated.

You can use the DataCanvas, this should help.
http://livedocs.adobe.com/flex/3/html/help.html?content=charts_eventsandeffects_14.html

Benchmarking line in the chart

Hi
I have created one VC model for comparitive analysis of feedack of the training program. Based on this i want some benchmark so that i can compare this with others. To do this i want to show some benchmarking line in my chart. How do i do this?
Thanks in advance
Deepdas
Edited by: Deepdas on Nov 6, 2009 4:16 PM

Hi
There is another way also of doing same thing -
1. First select 'Grid Lines' as Horizontal in the chart.
2. Then set value range manual & give min & max values.
3. Adjust interval size so as your 'Benchmark value' will come as one of the intervals.
Earlier what i explained is visible only if there are more than 1 values on category axis for a given field.
Regards
Sandeep

How to plot line and bar chart in one graph

i have one graph, but in this graph i want to plot line or bar chart using radio button selection.
can i do that...

You must have 2 data arrays or plots to get this. Make sure your plot legend is visible. Drag the plot legend vertical borders to view both plots. Select one of the plot to be bar plot (See the attachment)
Attachments:
BarPlots.PNG ‏14 KB

Street line formating issue (number comes before the street name)

Hello everyone,
I have an issue regarding formatting of the street line - when I include an address field (say in Smartforms) the street number comes before the street name. This would be according to USA standards, but I need it to be formatted by the EU standards (street name, and then the number). Also, where ever we have an address attached (SU01, customer/vendor master recs, purchase orders, etc) we get the same issue.
So, now it is: "1234 MyStreetName", but I need it to come as "MyStreetName 1234".
I have tried SA10, SA09, OY01 (and all the other customizing I could find), none of which had worked. The strange thing is that in our IDES system, it is displayed as it should be (name - number).
I can't find where this is preconfigured in IDES, so if anyone can suggest I would be very gratefull + points will be awarded for all the helpfull answers.
Best regards,
SD.

This thread has been moved here:
Street line formating issue (number comes before the street name)

Line Format in Chart

Similar Messages

Maybe you are looking for