Line-height not working with flash and css

I'm using dynamic text in Flash with CSS, but line-height
doesn't seem to be working with. Is it supported? If not, what is a
work around to get my text to look they way I want?

I believe this is due to a corrupt file in your profile. You can confirm this if you create a new temporary Firefox profile ([http://support.mozilla.com/en-US/kb/Managing+profiles managing profiles]) and if the problem disappears.
To fix this problem (hopefully), do this:
- access ''about:support'' in your location bar
- click ''Open Containing Folder''
- close Firefox
- delete the file ''downloads.sqlite'' (send it to the recycle bin, if, for any reason, you want to get it back later)
- start Firefox
Now the problem should be solved. I believe it's simply a matter of this file having become corrupt. For whatever reason. It's really unfortunate, but I hope this fixes the issue.

Similar Messages

  • FF wil not work with Flash and i need it to work even though Flash is obsolete.

    I use the latest ver of Flash and the latest ver of FF. EVERYTHING works in Chrome but I prefer FF.
    Can you please fix FF.
    Look, I know that Flash is obsolete and will disappear but for some reason it persists.
    What can you do?

    Next time you get the error, could you make a note of the exact text (or grab a screenshot and post it)?
    If it says that the plugin ''crashed'', Firefox may have logged detailed data about the crash that you can share with forum volunteers. Please see the last section of this article about how to extract crash report IDs: [[Firefox crashes]].

  • Captivate 4 AS2 Text Entry Box not working with Flash Player 11

    I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

    You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
    While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
    AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
    http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
    I believe if you switch back to version 9 while publish your project, it should work.
    Thanks,
    Anjaneai

  • AIR SDK 17 (BETA) is not working with Flash CS6

    Hi,
    The latest AIR SDK 17 is not working with Flash CS6.
    I tried to publish and install an iOS app to my connected device via USB but I always get an error "Check if iTunes is installed".
    The latest stable AIR SDK 16 is working fine, and yes, iTunes is installed on my PC.
    DETAILS:
    - Flash CS6
    - AIR SDK 17
    - System: Windows 8,1
    - iPodTouch with iOS 8.1
    REPRODUCE:
    Open new AIR iOS template and publish/install it to a USB connected iOS 8.1 device.
    Anyone else got that error?

    I was getting this intermittently.   Not a super problem.   A remove and install in iTunes gets it loaded (after you tell ITunes where it is).

  • Line-in not working with microphone?

    Line-in not working with microphone.
    I have Mac Mini Intel 1.83 GHz with 10.4.8
    I have tried plugging 3 microphones into the line-input on the back, also on my wife's Mac Mini (same model, os), but I cannot get to record into the Mac.
    I've been into System Prefs and set input to Line In and slid the Input Volume to high, but nothing.
    I know the Microphones work because if I plug them into a Griffin USB/mini jack adaptor and do it that way by selecting iMic USB audio system from the Input in System Prefs all works fine.
    But I need to use the mic with the Line-In.
    Any ideas why this is not working?

    The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
    That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

  • I am getting frustrated with Apple not working with Flash player on some of my favorite web sites. Is there any alternative that will work on I-pad instead of flash?

    I am getting frustrated with Apple not working with Flash Player on some of my favorite web sites! Is there another alternative to watching these site options on my I-pad?

    Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices - something which they have never managed to do and which they have now given up on trying to do.
    Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app).

  • Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

    Internal Microphone not working with Quicktime and some other apps, yet it does for Skype. 
    Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
    Any suggestions, please?

    Hi,
    Download Audio driver from here.
    Intructions how to install it in Vista/Win7.
    Extract this driver with Winrar.
    Open Device manager and expand the Sound, video and game controllers section.
    Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
    Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
    Click "Have Disk..." then Browse to the folder where the drivers were extracted  .......\V64 for 64-bit Vista/Win7. Click OK.
    Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
    Click Next, and you're done.
    I'm not sure which one from the list will work for You.
    This drivers weren't test. So if You will try them and it will work for You let us now about.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Site list update not working with TED and Zenworks for Servers

    Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
    Subject: Site list update not working with TED and Zenworks for Servers ,
    all on Linux
    Description: We have an exiting environment with 6 ZfS Servers and now we
    brought up a new Server for another location. I configured all same as on
    the other Server and the new one created all NAL-Apps at the new location.
    But in the Application Site list on the golden App is this Application
    missing. So I clicked on the Link up site list on the Distribution Screen
    in C1. On ApplicationSite list the App from the new location is missing.
    So I removed all and added the new from the new location and now i see all
    in the application site list.When I install an app on the client on the
    new location NAL is connecting alway th the same (wrong location-server
    and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
    file.
    I looked on the other tab on C1 at the golden app an I see the backlinks
    are going to all other servers without the new one. Software installation
    on other locations are ok
    Regards

    Andreas,
    I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
    Next delete the Distribution from the Subscriber and then re-push the channel.
    What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
    In this excerpt you will see the entry
    Golden App =
    This should be were the link is to
    You can check this both ways in the Golden App and in the Distributed Application.
    Here is a log from me that shows this info as an example of what you should be looking for.
    2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

  • HT3574 The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

    The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1

    Check with your carrier or telephone service provider.  Not all carriers provide this service.

  • Polarioid pogo printer not working with ipad and iphone

    And I can not believe how that truly *****... I am traveling through the states and bought the pogo to print on the road... Only to find out that it does not work with ipad and does not work with iphone... Unless I jailbreak my phone which I don't really want to do...
    Apple wants us to go mobile and clouding and all those things, yet, when we do go mobile and try a mobile life style, we are encountering so much technical crap that we loose the will to live...
    I could have spend the hundred dollar for the pogo to have pics printed out in every kiosk in the country...
    WWhen is Apple going to come to its senses about little life savers like the pogo and bluetooth???????
    Is anyone aware of a work around so I can print on the go? And a solution that does not involve a programmers brain because my single braincell is not working while traveling... It needs to be easy!

    To cut through all the rage and anger and "knowing" who wanted what, the Pogo has been out for a year or so, well before Mr. Jobs' passing, and Apple did not make any mention of supporting printing on anything other than Airprint compatible printers.
    Since Airprint is a Wi-Fi/ethernet thing, Polaroid would have to make a significant redesign to the Pogo.  Considering that the first iPhones only supported Bluetooth headsets and Apple didn't provide any indications about increasing Bluetooth support, Polaroid's decision for the Pogo to be Bluetooth was obviously not with iOS devices in mind.  This is why initially Polaroid had links on the FAQ to tell Apple to add Bluetooth printing support (so that in effect, asking Apple to pay for the expenses to make the iPhone compatible with the Pogo, rather than Polaroid paying to make the Pogo compatible with iOS.)
    I come from a photograpic background.  I got the Pogo as soon as it came out.  I quite literally was on Polaroid's website every day checking to see when I could order it.  Having "instant" sticker prints is wonderful at family picnics with all the kids.  While it would be great to be able to get Pogo prints from anyone's iPhone, I stopped holding my breath when Apple announced Airprint, which came well after the Pogo was released.  So I took that as the sign that it was probably never going to happen.  (I knew that the Pogo wasn't iOS compatible when I bought it so not having compatiblity is not a deal-breaker for me.  But, yes, it would be nice.)
    I now use a Polaroid Z340 since it's a 14 megapixel camera that prints larger 3x4 Zink prints.  Polaroid makes the GL10, which is basically a Pogo using the same printer as the Z340.  But it's still Bluetooth only.   So while I sympathize with the desire to have a really compact portable printer like the Pogo, iOS compatibility just does not seem to be on the horizon.  IMHO, it would be more realistic that Polaroid create an app to do Bluetooth printing.  But considering Polaroid's financial issues, I'm not holding my breath

  • My iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case.  Any ideas why I cannot update iPhoto?

    my iPhoto will not work with Yosemite, and it says that it was purchased under a different account, but that's not the case.  Any ideas why I cannot update iPhoto?

    How did you buy iPhoto? Did it come preinstalled on your computer with Lion or later, or did it come with Snowleopard on system installer disks?
    Which version of iPhoto?
    If you have a version of iPhoto '11 and it is showing on the Purchased tab of the App Store, with your Apple ID, then delete iPhoto from the Applications folder  (don't empty the Trash) and download iPhoto again from the Purchased tab.
    If that does not work, contact The App Store Support  from the Quick Links on the AppStore main page.
    Only apple Support can fix problems with apple ID.

  • Captivate 5.5 not working with Flash 11.4?

    I had Flash 11.4 and published a module with click boxes that jump to URLs.  The click boxes don't appear in either preview or published mode.   No hand cursor, no click box, no URL, nothing.  I've double checked the settings on the click boxes three times... they are correct, and the box is the top most thing on the slide.
    Based on advice I found on this forum on other flash problems, I tried uninstalling Flash 11.4 and going back to 10.3.  Now every time I try to launch the module I immediately go to the Flash 11.4 download page, and get the message "this content requires Flash to play - download now".  So apparently you can't install an earlier version of Flash and use it with Captivate.
    Which isn't a solution anyway, because my I don't want my viewers to have to do that to take this training.  So what do I do?  How do I make these urls available?
    I won't waste my time calling Adobe support... I've made that mistake in the past.  I'm really hoping someone here can help me.  Upgrading to Captivate 6 isn't an option...it's not in the budget.   They need to make 5.5 work with Flash - it's not that old.  It's SO frustrating that every time there is a Flash upgrade I have problems with this stupid software.  If they are going to publish to Flash, they need to keep the software current.  They own both products for goodness sake - why don't they work together?   Please help!
    Thanks for your help.
    Toni Rexrode

    I doubt that Flash 11.4 is the cause of these issues.  Having Flash 11.4 installed on your box doesn't mean your end users will need it..  Captivate 5.5 and 6 will only publish as high as Flash 10.2.  So all your end users would need is that version or above.
    I assume when you say you have check the settings on your click boxes, you made sure you have them configured to show the hand cursor?  If this is not turned on then the normal mouse pointer is all that will be visible.  But I'm betting you've checked that already.
    What you may not realise is that sometimes Captivate will APPEAR to show your click boxes are on the top layer of the timeline when you look at it in Edit mode, but in fact they may be buried down under other objects in the layers and NOT be clickable at runtime.  This has caught me out a few times.
    To ensure that your clickboxes ARE on the top layers, select each click box in the timeline and then click the icon on the main toolbar to Bring Selected Objects to the Front.  Then publish and test again.

  • FireFox 3.6.16 still not working with Flash!

    Since updating to the latest version of FireFox 3.6 I have not been able to watch flash video's on YouTube and other sites, also any flash based content is blank or black.
    I'm using Mac OS X 10.5.8 on a G5 PPC so Flash 10.1.102.64, the latest for PPC Mac's.
    I've gone through all the usual steps of disabling plug-in's and extensions with no luck.
    I'm also using the latest Safari 5 and it is still working with YouTube and other Flash sites.
    ETA - Just found something weird, if I launch the QuickTime Player (not the plug-in) after launching FireFox then Flash appears to act normally, even after quiting QT.

    @cor-el
    Thanks for clearing up my misunderstanding. As i understood now it is in fact only a "DOM storage data" topic.
    Quote from betterprivacy:
    ''"Disabling DOM storage (instead of deleting the file on shutdown) causes a website script to throw an exception. This means that the execution of the script is aborted immediately, not just the DOM storage instruction is ignored. None of the following script instructions would be executed, even if those instructions have nothing to do with DOM storage. That is the reason why -with DOM storage disabled- sites like CNN.com will cease to play videos."''

  • VM Manager's Launch Console not working with OpenJDK and IcedTea

    Fedora 15
    java-1.6.0-openjdk-1.6.0.0-59.1.10.3.fc15.x86_64
    icedtea-web-1.0.4-1.fc15.x86_64
    ICEDTEA-WEB NOTES
    Invalid XML
    An error like
    netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1203)
    indicates that the JNLP file is not valid XML. The error happens because netx uses an XML parser to parse the JNLP file. Other JNLP client implementations may use more lenient parsers and may or may not work with the given JNLP file. Errors caused by malformed JNLP files can often lead to subtle bugs, so it is probably best to fix the JNLP file itself. A tool like xmlproc_parse might be able to pinpoint the error.
    XMLPROC_PARSE OUTPUT
    $ xmlproc_parse ovm_rasproxy-ws.jnlp
    xmlproc version 0.70
    Parsing 'ovm_rasproxy-ws.jnlp'
    E:ovm_rasproxy-ws.jnlp:3:89: Undeclared entity 'machineName'
    E:ovm_rasproxy-ws.jnlp:3:89: ';' expected
    Parse complete, 2 error(s) and 0 warning(s)
    JAVAWS OUTPUT
    $ javaws ovm_rasproxy-ws.jnlp
    netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
    JAVAWS -VERBOSE OUTPUT
    $ javaws -verbose ovm_rasproxy-ws.jnlp
    No User level deployment.properties found.
    Starting security dialog thread
    JNLP file location: ovm_rasproxy-ws.jnlp
    Status: CONNECTED DOWNLOADED STARTED +(CONNECTED DOWNLOADED STARTED) @ ./ovm_rasproxy-ws.jnlp
    <?xml version="1.0" encoding="UTF-8"?>
    line: 2 <jnlp spec="1.0+" codebase="http://192.168.4.21:7001/ovm/rasproxy/"
    line: 3 href="ovm_rasproxy-ws.jnlp?vmachineId=0004fb0000060000046ffdb8a331ce21&machineName=mytestmachine">
    line: 4 <information>
    line: 5 <title>Oracle VM Remote Access Service</title>
    line: 6 <vendor>Oracle</vendor>
    line: 7 <homepage>http://support.oracle.com/</homepage>
    line: 8 </information>
    line: 9 <resources>
    line: 10
    line: 11 <j2se version="1.5+"
    line: 12 href="http://java.sun.com/products/autodl/j2se" />
    line: 13 <jar href="ovm_rasproxy-signed.jar" main="true" />
    line: 14 <jar href="OvmCoreApi.jar" />
    line: 15 <jar href="MgmtUtil.jar" />
    line: 16 <jar href="Odof.jar" />
    line: 17 <jar href="commons-logging-1.1.1.jar" />
    line: 18 </resources>
    line: 19
    line: 20
    line: 21 <application-desc main-class="com.oracle.ovm.ras.proxy.RasProxyApplet">
    line: 22 <argument>-server</argument>
    line: 23 <argument>192.168.4.21</argument>
    line: 24 <argument>-service</argument>
    line: 25 <argument>003600010004fb0000060000046ffdb8a331ce21</argument>
    line: 26
    line: 27 </application-desc>
    line: 28 <security>
    line: 29      <all-permissions/>
    line: 30 </security>
    line: 31 <update check="background"/>
    line: 32 </jnlp>               net.sourceforge.jnlp.ParseException: Invalid XML document syntax.
         at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
         at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
         at java.security.AccessController.doPrivileged(Native Method)
         at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
    Caused by: net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
         at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
         at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
         at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
         at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
         at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
         at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
         at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
         at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
         ... 8 more
    Caused by:
    net.sourceforge.nanoxml.XMLParseException: XML Parse Exception during parsing of a jnlp element at line 32: Unexpected end of data reached
         at net.sourceforge.nanoxml.XMLElement.unexpectedEndOfData(XMLElement.java:1094)
         at net.sourceforge.nanoxml.XMLElement.readChar(XMLElement.java:877)
         at net.sourceforge.nanoxml.XMLElement.resolveEntity(XMLElement.java:1013)
         at net.sourceforge.nanoxml.XMLElement.scanString(XMLElement.java:658)
         at net.sourceforge.nanoxml.XMLElement.scanElement(XMLElement.java:915)
         at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:512)
         at net.sourceforge.nanoxml.XMLElement.parseFromReader(XMLElement.java:464)
         at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1239)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:177)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:162)
         at net.sourceforge.jnlp.JNLPFile.<init>(JNLPFile.java:148)
         at net.sourceforge.jnlp.runtime.Boot.getFile(Boot.java:267)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:196)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
         at java.security.AccessController.doPrivileged(Native Method)
         at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
    netx: Unexpected net.sourceforge.jnlp.ParseException: Invalid XML document syntax. at net.sourceforge.jnlp.Parser.getRootNode(Parser.java:1243)

    Both realvnc 4.1.3 and tigervnc 1.1.0.1 work on the Linux side.
    I was able to get the console to work by wiping the contents of the directory I created at the beginning of this exercise and then copying in a fresh OVM 3.0.2 created ovm_rasproxy-ws.jnlp file.
    [gordon@ufo Downloads]$ rm /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/*
    [gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
    java.io.EOFException
         at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
         at java.io.DataInputStream.readUTF(DataInputStream.java:589)
         at java.io.DataInputStream.readUTF(DataInputStream.java:564)
         at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
         at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
         at java.security.KeyStore.load(KeyStore.java:1201)
         at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
         at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
         at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
         at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
         at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
         at java.security.AccessController.doPrivileged(Native Method)
         at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
    netx: Unexpected java.io.IOException: /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ovm_rasproxy-ws.jnlp (No such file or directory) at net.sourceforge.jnlp.JNLPFile.openURL(JNLPFile.java:255)
    [gordon@ufo Downloads]$ cp ovm_rasproxy-ws.jnlp /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/
    [gordon@ufo Downloads]$ javaws ovm_rasproxy-ws.jnlp
    java.io.EOFException
         at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
         at java.io.DataInputStream.readUTF(DataInputStream.java:589)
         at java.io.DataInputStream.readUTF(DataInputStream.java:564)
         at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
         at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
         at java.security.KeyStore.load(KeyStore.java:1201)
         at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
         at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
         at net.sourceforge.jnlp.security.VariableX509TrustManager.<init>(VariableX509TrustManager.java:91)
         at net.sourceforge.jnlp.security.VariableX509TrustManager.getInstance(VariableX509TrustManager.java:395)
         at net.sourceforge.jnlp.runtime.JNLPRuntime.initialize(JNLPRuntime.java:210)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:182)
         at net.sourceforge.jnlp.runtime.Boot.run(Boot.java:56)
         at java.security.AccessController.doPrivileged(Native Method)
         at net.sourceforge.jnlp.runtime.Boot.main(Boot.java:173)
    java.io.EOFException
         at java.io.DataInputStream.readUnsignedShort(DataInputStream.java:340)
         at java.io.DataInputStream.readUTF(DataInputStream.java:589)
         at java.io.DataInputStream.readUTF(DataInputStream.java:564)
         at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:744)
         at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:55)
         at java.security.KeyStore.load(KeyStore.java:1201)
         at net.sourceforge.jnlp.security.KeyStores.createKeyStoreFromFile(KeyStores.java:358)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:124)
         at net.sourceforge.jnlp.security.KeyStores.getKeyStore(KeyStores.java:103)
         at net.sourceforge.jnlp.security.KeyStores.getCertKeyStores(KeyStores.java:157)
         at net.sourceforge.jnlp.tools.JarSigner.checkTrustedCerts(JarSigner.java:414)
         at net.sourceforge.jnlp.tools.JarSigner.verifyJars(JarSigner.java:269)
         at net.sourceforge.jnlp.runtime.JNLPClassLoader.verifyJars(JNLPClassLoader.java:946)
         at net.sourceforge.jnlp.runtime.JNLPClassLoader.initializeResources(JNLPClassLoader.java:422)
         at net.sourceforge.jnlp.runtime.JNLPClassLoader.<init>(JNLPClassLoader.java:169)
         at net.sourceforge.jnlp.runtime.JNLPClassLoader.getInstance(JNLPClassLoader.java:283)
         at net.sourceforge.jnlp.Launcher.createApplication(Launcher.java:650)
         at net.sourceforge.jnlp.Launcher.launchApplication(Launcher.java:436)
         at net.sourceforge.jnlp.Launcher$TgThread.run(Launcher.java:830)
    Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
    INFO: Server : 192.168.4.16
    Oct 4, 2011 4:13:41 PM com.oracle.ovm.ras.proxy.RasProxyApplet main
    INFO: service id : 003600010004fb0000060000281734f86e6aab47
    Oct 4, 2011 4:13:42 PM com.oracle.ovm.ras.proxy.external.VncViewerLauncherFactory getVncViewerLauncher
    INFO: Os is : linux
    Oct 4, 2011 4:13:53 PM com.oracle.ovm.ras.proxy.ProxyThread setupSSL
    INFO: DONE SSL Handshaking
    The console starts and all is well with the world.
    This is obviously not how one would want to start a console by downloading the .jnlp file and running it on the command line so I am now going to remove the /home/gordon/.icedtea/cache/http/* and see what happens.
    First, let me say that nothing happened. It did not work. I did confirm that it creates the directory structure again /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ but there is only one file in the directory.
    [gordon@ufo rasproxy]$ cat ovm_rasproxy-ws.jnlp.info
    #automatically generated - do not edit
    #Tue Oct 04 16:43:29 EDT 2011
    last-modified=0
    last-updated=1317761009801
    content-length=883
    If I save that ovm_rasproxy-ws.jnlp file instead of opening it and copy it to the /home/gordon/.icedtea/cache/http/192.168.4.16/ovm/rasproxy/ directory the console will now start successfully with one minor drawback - it will only launch that one VM based on the .jnlp file that I downloaded.
    Help?

  • NB200 Windows 7 Fn key not working with ESC and F1 to F8 keys

    I recently bought a Toshiba NB200-136 and everything worked fine.
    Flash cards on top/bottom of the screen work with Space, ESC and F1 to F8 keys, the rest of function buttons work without showing the cards. Lately the cards stopped showing and I cannot use the Fn + Space, ESC, F1-F8 keys (there's just no reaction), though the rest of buttons work with Fn and the LED is always lit when the Fn is pressed.
    I reset Flash Cards, checked and changed their settings few times and they work only if I choose 'Allow the mouse to bring up the cards' option. Even then they don't appear when I press Fn and the functions work only when I click one of the cards.
    The problem appeared after (though I'm not sure if immediately) such situation:
    I clicked Start -> Shut down and closed the lid. When I opened it the next morning I saw an empty list of programs that wouldn't shut down (it happens quite often, but it's off top). I clicked 'Cancel' or 'Force shut down' but it didn't work so I pressed the Power Button for 5 secs to turn the computer off. I noticed the Fn problem after turning it on and it didn't disappear after resets.
    I think the problem appeared before but disappeared after reset so I ignored it.
    I'll be thankful for your help.

    Any time that you force Windows to stop instead of letting it shut down normally (sometimes you have to shut it off), you may have lost clusters of data that interfere with the proper operation of Windows. So I suggest you start up and run scandisk and make sure you check the box for fixing problems. The other box doesn't need to be checked unless you suspect bad sectors on the hard drive and it takes a long time so I recommend only checking the one box for finding and fixing errors.
    Let us know if this worked and the problem is fixed.
    Good luck.

Maybe you are looking for