Line In 1 / Mic In not registering in windows xp 64 professio
Hello there all - i upgraded my OS to Windows XP Pro 64. I have a SoundBlaster Audigy 4 Pro.
i Installed the drivers using:?SBAX_WBUP2_LB_2_09_006.exe?the soundblaster is working, except that the Line In /Mic In is not registering. I can hear the microphone check through the computer speakers, which are a standard self powered Behringer Truth B2030A, but no programs read the sound. I have adjusted all the advanced audio properties on the Soundblaster in Windows, including making sure "What you Hear" is checked, "Line In/Mic" is checked, the volume levels are acceptable. Has anyone else had a similar problem? Any suggestions?i did not install the creative EAX program, only the SoundBlaster Audigy Drivers. thanksmatt
Try this:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=683
Similar Messages
-
Acrobat will not register on Windows 8.1 computer
I have installed Acrobat 8 Professional on a new Windows 8.1 computer. It works, but every time I open the program it says it was not registered properly. If I ignore the warning the program still works, but I have a plug-in that I use that I have to register every time I use it.
Hi vbp printer,
Acrobat 8 on Windows 8.1 is an untested and unsupported configuration and you might face compatibility issues.
Please try running Acrobat 8 in compatibility mode and then check.
Regards,
Rave -
Oracle ODBC driver not register in Windows
hi,
i notice that the oracle odbc driver is not register as one of the data source in the windows. Do anyone having this problem too?? and any solutions??
I've installed Oracle 10.2.0.1.0 on a windows XP platform. When i want to create a data source in the ODBC, i realize that the oracle driver is not there...
thanks in advancehi,
i've checked, oracle odbc is installed in my machine, but it is not appear in the windows data source ODBC (control panel > administrative tools > Data Sources (ODBC)).
I've tried to uninstall and re-install, again the oracle odbc is installed in my machine but never appear in the windows data source ODBC. Is there a way to made it appear in the windows manually?
thanks -
IPod not registering on windows when connected
Hi,
My ipod is connected up to a usb 2.0 port and it just isnt registering. ive tried on another computer with the same result. Has anyone encountered similar problems?
Please help thankyouI might have an answer....
I had this problem for 5 days and I finally sorted thru 15 articles to get it to work.
1. If you have a lap top go to this support web site and follow the instruction. I had the same problem with my creative media MP3 player.
2. The other useful tip is that the IPOD tries to pick a default drive on your computer and if u are already using that drive for something, then it does not work. To check/fix this...
a. Go to "MY computer"
b. Each drive will have a letter ("c:\")
Write down all of the ones you are using.
c. Right click on the "My computer icon" and select "Manage" from the menu.
d. Under "storage" pick "Disk management"
IT MAY TAKE upto 5 minutes to load!!!
e. Find the ipod in the menu on the right and make sure that the drive letter is not one that you wrote down in step b. If it is, then right click and change it.
f. Restart your computer.
3. IF this does not work, re-install ITunes.
AFter than... keep looking.
I got this stuff off of other discussion page so thanks to everyone who has helped me out!!! -
MSI TI4200 VTP not registering in windows XP K7N2 DELTA LISR
Hi All First Post and very Confused
Spec First
MSI TI4200 VTP Graphics
K7N2 Delta LISR M/B
AMD 2800 CPU
1GB Samsung P2700 DDR Ram
500 w PSU
80gb ATA 133 HD
120gb SATA HD
Windows XP Proff Edition OS
Problem is that I have just built this computer installed windows and all MB drivers and everything is fine I then install th Graphics card drivers and I get a blue screen upon the restart that is to quick to read and the system just reboots to the safe mode selection screen this is an ongoing loop if i select start windows normally. If i select safe mode the system boots up in safe mode.
I also noticed after I had taken windows back to last known good configuration that windows had not recognised my card and just showed VGA adapter with the yellow exclaimation mark. I have tried another graphics card and that worked fine.
windows installed it etc automatically
How can I read the blue screen or what is on it as it flashes up so quickly and what do you fine people think my problem is I have disabled 8x agp in bios
The TI4200 came out of my previous MSI KT400 Ultra
Please help
Longshankswhat was the other vga card
post max amps of psu
try it at agp x4 ,disable agpx 8 in bios -
Jre 32-bit not registered or created any symlinks on windows 64-bit
I have installed 64-bit public jre 1.8 on windows 2012. Then installed 32-bit public jre 1.8 for testing 32-bit based applications. I can see symlinks created for 64-bit jre, but no symlinks created for 32-bit jre. And also 32-bit jre is not registered on windows 2012, because of this reason I have to update environment PATH variable every time I update 32-bit jre version. Is there any way we can use jre 32-bit without updating %PATH% variable.
The WoW64 subsystem redirects shortcuts that point to the 64-bit Program Files to the 32-bit Program Files (x86) causing the plugin to not be found.
The simplest fix would be to copy the 32-bit plugin into the Plug-Ins folder of the 32-bit version of Photoshop.
Unfortunately Wow64DisableWow64FsRedirection does not work for %PROGRAMFILES%, so a 32-bit application would have to attempt to fix the path manually. -
Mini-DVI port does not work in windows 7
I am currently running boot camp 3.2 on windows 7 professional. When I attempt to use my display port it does not register in windows 7, however when i switch back to snow leopard it works perfectly fine. What can I do to fix this?
I have a MacMini that is a intel core solo and has the DVI port not the mini-DVI.
I was able to load win7 but only after connecting the MacMini to an LCD monitor via DVI-to-VGA converter that came with my mac mini.
I am running snow leopard on the mac side and the video works great in 1080p via DVI cable direct to my DLP tv. but when I loaded win7 the tv couldn't display the video feed. The tv read "not compatible data". The DLP tv has a VGA input and win7 is running fine on it.
I am looking for a way to enable the video card to give the same quality on the win7 side as the OS X side, so that I can go back to the DVI cable and the 1080p I was getting in snow leopard. -
I have successfully exported subtitles (XML files) from FC version 7 to FC version 6, by choosing Apple XML Interchange Format Version 4. Now the exported subtitles suddenly read in one long line, at the top, not registering any "Enter" keystrokes. The same happens even if I re-import the XML file into Final Cut Version 7 (from where I exported the subtitles). Any tips on how to fix this?
You might see if you can bring the xml file into Title Exchange Pro
http://www.spherico.com/filmtools/TitleExchange/
It's a great program and the author was very responsive when I had a problem.
If it reads correctly, you can probably save it back out.
If you want to send it to me, I'll see if it opens.
[email protected] -
[SOLVED] Mic does not work on Intel ICH8 (rev 3) sound card
Hi, folks.
I cannot get my sound card to record anything, using a built-in microphone. Audio output works just fine, though. I hope someone can help me, I have been banging my head against the wall for some time over this issue...
My laptop is Toshiba Satellite A200-1J0 (PSAE6E-04R036G3). alsamixer settings are fine, I tried supplementing additional options to /etc/modprobe.d/modprobe.conf, but no luck, tried some of the combinations (model=<> position_fix=<>).
When recording sound with gnome-sound-recorder, with Capture set as input, nothing is heard. Skype can't record anything, either. I can't even get the crackling or hissing sound like some users do.
Should I try to get the latest ALSA?
Debug details start from now on:
/etc/modprobe.d/modprobe.conf
options snd-hda-intel index=0 model=3stack position_fix=1
lsmod | grep snd
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_hda_codec_atihdmi 2051 1
snd_seq_midi_event 4452 1 snd_seq_oss
snd_hda_codec_realtek 179240 1
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_hda_intel 18697 1
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec 56728 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57479 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 16117 2 snd_seq,snd_pcm
snd 43847 13 snd_seq_oss,snd_hda_codec_realtek,snd_seq,snd_hda_intel,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5809 2 snd_hda_intel,snd_pcm
lspci (parts of interest)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
01:00.0 VGA compatible controller: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 2000 [size=256]
Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc020000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fc010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
alsa-info.sh
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.58
!!Script ran on: Sat Jan 23 20:27:13 UTC 2010
!!Linux Distribution
Arch Linux \r (\n) (\l) DISTRIB_ID=arch
!!DMI Information
Manufacturer: TOSHIBA
Product Name: Satellite A200
!!Kernel Information
Kernel release: 2.6.32-ARCH
Operating System: GNU/Linux
Architecture: i686
Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.21
Library version: 1.0.22
Utilities version: 1.0.22
!!Loaded ALSA modules
snd_hda_intel
snd_hda_intel
!!Sound Servers on this system
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc400000 irq 22
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfc010000 irq 17
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
00:1b.0 0403: 8086:284b (rev 03)
Subsystem: 1179:ff00
01:00.1 0403: 1002:aa08
Subsystem: 1002:aa08
!!Modprobe options (Sound related)
snd-hda-intel: index=0 model=3stack position_fix=1
!!Loaded sound module options
!!Module: snd_hda_intel
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
single_cmd : N
!!Module: snd_hda_intel
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
single_cmd : N
!!HDA-Intel Codec information
--startcollapse--
Codec: Realtek ALC268
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0268
Subsystem Id: 0x1179ff02
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x35 0x35]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00]
Connection: 1
0x02
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x1d
Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x80 0x80]
Connection: 3
0x03 0x1d 0x02
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0f
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x10
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x02 0x02]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a11830: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x99a3093e: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x4016852d: [N/A] Speaker at Ext N/A
Conn = Digital, Color = Purple
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=10
Processing Coefficient: 0x03
Coefficient Index: 0x01
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1d 0x1d]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12
Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x13
Codec: LSI ID 1040
Address: 1
Function Id: 0x2
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1
Codec: ATI R6xx HDMI
Address: 0
Function Id: 0x1
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 9 Jan 23 19:11 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 12 Jan 23 19:11 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 8 Jan 23 19:11 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 7 Jan 23 19:11 /dev/snd/hwC0D1
crw-rw----+ 1 root audio 116, 11 Jan 23 19:11 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 6 Jan 23 21:04 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 5 Jan 23 21:04 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 4 Jan 23 19:11 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 10 Jan 23 19:11 /dev/snd/pcmC1D3p
crw-rw----+ 1 root audio 116, 3 Jan 23 19:11 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Jan 23 19:11 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Jan 23 19:11 .
drwxr-xr-x 3 root root 280 Jan 23 19:11 ..
lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:00:1b.0 -> ../controlC0
lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:01:00.1 -> ../controlC1
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xfc400000 irq 22'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,1179ff02,00100003 HDA:11c11040,11790001,00100200'
Controls : 21
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 53 [83%] [-11.00dB] [on]
Front Right: Playback 53 [83%] [-11.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 2 [100%]
Front Right: 2 [100%]
Simple mixer control 'Line In Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 2 [100%]
Front Right: 2 [100%]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 12
Mono:
Front Left: Playback 0 [0%] [-24.00dB] [on]
Front Right: Playback 0 [0%] [-24.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 29 [94%] [27.00dB] [on]
Front Right: Capture 29 [94%] [27.00dB] [on]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
!!-------Mixer controls for card 1 [HDMI]
Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfc010000 irq 17'
Mixer name : 'ATI R6xx HDMI'
Components : 'HDA:1002aa01,00aa0100,00100000'
Controls : 4
Simple ctrls : 1
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Front Playback Volume'
value.0 64
value.1 64
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Headphone Playback Volume'
value.0 53
value.1 53
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mic Boost'
value.0 2
value.1 2
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Front Mic Boost'
value.0 2
value.1 2
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Line In Boost'
value.0 0
value.1 0
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -1650
comment.dbmax 3000
iface MIXER
name 'Capture Volume'
value.0 29
value.1 29
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
control.10 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
value Mic
control.11 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 12'
comment.dbmin -2400
comment.dbmax 0
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
control.12 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
control.13 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.14 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.15 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
control.18 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 64
control.19 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
control.20 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
control.21 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 120'
comment.tlv '0000000100000008fffff44800000032'
comment.dbmin -3000
comment.dbmax 3000
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
state.HDMI {
control.1 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.2 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.3 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
--endcollapse--
!!All Loaded Modules
Module
usbhid
hidp
hid
fuse
radeon
ttm
drm_kms_helper
drm
i2c_algo_bit
rfcomm
sco
bridge
stp
llc
bnep
l2cap
crc16
coretemp
ipv6
snd_seq_dummy
snd_seq_oss
btusb
joydev
snd_hda_codec_atihdmi
fan
snd_seq_midi_event
bluetooth
snd_hda_codec_realtek
arc4
ecb
snd_seq
snd_hda_intel
iwlagn
snd_seq_device
snd_hda_codec
sdhci_pci
iwlcore
snd_pcm_oss
uvcvideo
omnibook
videodev
snd_mixer_oss
snd_hwdep
pcmcia
tifm_sd
sdhci
snd_pcm
v4l1_compat
snd_timer
psmouse
mac80211
mmc_core
yenta_socket
vboxdrv
snd
cpufreq_powersave
i2c_i801
uhci_hcd
r8169
ehci_hcd
iTCO_wdt
intel_agp
tifm_7xx1
video
rsrc_nonstatic
soundcore
firewire_ohci
agpgart
mii
i2c_core
pcspkr
snd_page_alloc
pcmcia_core
iTCO_vendor_support
led_class
output
usbcore
tifm_core
serio_raw
cfg80211
evdev
cpufreq_conservative
battery
ac
firewire_core
rfkill
crc_itu_t
thermal
button
cpufreq_ondemand
sg
acpi_cpufreq
freq_table
processor
rtc_cmos
rtc_core
rtc_lib
ext3
jbd
mbcache
sr_mod
cdrom
ata_generic
sd_mod
ata_piix
pata_acpi
ahci
libata
scsi_mod
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x411111f0
0x13 0x411111f0
0x14 0x99130110
0x15 0x0221101f
0x16 0x411111f0
0x18 0x02a11830
0x19 0x99a3093e
0x1a 0x411111f0
0x1c 0x411111f0
0x1d 0x4016852d
0x1e 0x411111f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D1/init_pin_configs:
/sys/class/sound/hwC0D1/driver_pin_configs:
/sys/class/sound/hwC0D1/user_pin_configs:
/sys/class/sound/hwC0D1/init_verbs:
/sys/class/sound/hwC1D0/init_pin_configs:
0x03 0x18560010
/sys/class/sound/hwC1D0/driver_pin_configs:
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
!!ALSA/HDA dmesg
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
Bluetooth: L2CAP socket layer initialized
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x018b0000
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Bridge firewalling registered
Last edited by teMplaryum (2010-01-26 10:15:18)Hi there!
I had the very same problem with the same soundcard and found this thread.
The problem got solved for me by adding the same line as you have to /etc/modprobe.d/modprobe.conf.
However, I also had to create /etc/modprobe.d/sound.conf and add:
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=toshiba power_save=0
Notice the difference on the "model=toshiba" part.
However, my laptop is not a Toshiba, but a Compal IFL90.
I remember that in Ubuntu I needed(a long time ago) to add a line to /etc/alsa.conf with model=toshiba. I figured it might be worth a try, and well, it did.
I hope this can help someone else.
As for the OP: "You have my thanks!" -
Help: can not regist application in HP-UX 11.0
My application work fine in iAS SP3 for Win2000, but when I deployed it to
HP-UX 11.0, It can not regist the application in HP-UX.
can any onr help me, thanks
Lu yanqiang
the error message is:
HotSpot VM warning: Setting of property "java.compiler" is ignored
creating engine class space...
loading jx2util...
loading jx2util...done
Connected to LDAP server on websvr.sh-catcher.com port 389
com.kivasoft.engine.EngineClassLoaderNonVersionable: EngineClassLoader
constructer called
com.kivasoft.engine.EngineClassLoaderNonVersionable: ! NVCL CREATED at:
com.kivasoft.engine.EngineClassLoaderNonVersionable@1fbe93
ECS initializing engine class loader instance.
com.kivasoft.engine.EngineClassLoader: EngineClassLoader constructer called
initGDSKey: GDSKey_Base
initGDSKey- just put : com.kivasoft.IGDSKey_Base
key=com.kivasoft.gds.GDSKey@41cd1f
initGDSKey: GDSKey_Root
initGDSKey- just put : com.kivasoft.IGDSKey_Root
key=com.kivasoft.gds.GDSKey@31f71a
initGDSKey: GDSKey_Current
initGDSKey- just put : com.kivasoft.IGDSKey_Current
key=com.kivasoft.gds.GDSKey@5601ea
initGDSKey: GDSKey_CurrentEngine
initGDSKey- just put : com.kivasoft.IGDSKey_CurrentEngine
key=com.kivasoft.gds.GDSKey@17d257
context= com.kivasoft.context.Context@6ee36c
resolve property: GX.path.class GX_CLASSPATH SYSTEM_JAVA null
resolve value: /opt/iplanet/ias6/ias/APPS
resolve property: GX.path.class.core GX_CLASSPATH_CORE SYSTEM_JAVA
java.;com.kivasoft.;gx.
resolve value:
java.;com.kivasoft.;gx.;com.netscape.;javax.;netscape.ldap.;netscape.tooluti
l.
resolve property: GX.versionable GX_VERSIONABLE SYSTEM_JAVA
com.kivasoft.engine.IVersionable
property not in GDS
resolve value: com.kivasoft.engine.IVersionable
resolve property: GX.all.versionable GX_ALL_VERSIONABLE SYSTEM_JAVA 0
property not in GDS
resolve value: 0
resolve property: GX.taskmanager.period GX_TASKMANAGER_PERIOD SYSTEM_JAVA 10
property not in GDS
resolve value: 10
resolve property: GX.versionable.if.extends GX_VERSIONABLE_IF_EXTENDS
SYSTEM_JAVA javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
property not in GDS
resolve value: javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
resolve property: GX.versionable.if.implements GX_VERSIONABLE_IF_IMPLEMENTS
SYSTEM_JAVA javax.servlet.Servlet
property not in GDS
resolve value: javax.servlet.Servlet
class_dir 4 AppPath: /opt/iplanet/ias6/ias/APPS/compiled_jsp
loading component...{7ee76a00-a999-11d1-a16f-006097594151}
getting threadLocal obj
loading component...{91f29740-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread loaded by primordial CL
registered module... com.kivasoft.IModuleThread
loading component...{91f29620-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
loaded by primordial CL
loading component...{ed049d80-b936-1548-e481-080020721767}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
loaded by primordial CL
EJBBinder: binder is GOOD..
EJBBinder: context set obj for IID_IGXEBBinder
loading component...{a84f0507-a912-11cf-aa6c-524153480000}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
loaded by primordial CL
registered module... com.kivasoft.IGDSModule
loading component...{c70f2c00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
loaded by primordial CL
loading component...{c70f2d00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{c70f1a00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule loaded by primordial CL
registered module... com.kivasoft.IPrincipalModule
loading component...{35069f7a-0a09-1406-8f1a-0800208055c0}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37500-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37540-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{be5cfde0-cd9e-11d1-94aa-0060083a5082}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule loaded
by primordial CL
registered module... com.kivasoft.IEBModule
The current input file= testdb.xml
About to start xml -> descriptor conversion process
xmlToDescriptor- file name=testdb.xml
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
servlet name = testdb
!!! parseWebAppFromDOM() just put in setServlet name = testdb
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
!!! handleIASServlet(): Get servlet name= testdb
AppComponentDescriptor: com.netscape.server.deployment.WebAppDescriptor
All EnvEntries name:
All Ejb-refs:
All Resource-refs:
WebApp package name = testdb
Enter setupPluginInfoInGDS()
creating ServletPatternTrans entry, url= /testdb
webapp ContextRoot= null
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
[01/Nov/2001 16:00:04:5] info: GDS-007: finished a registry load
--- now put Web-app component descrptor into GDS
webAppName = testdb
Enter getAllServlets,registeredServletNames.size= 0
Enter getAllServlets,registeredServletNames.size= 0
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@540408
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getClassImpGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Now do some verification step and regenrate the web-app.xml.out file from
GDS data
getWebAppGDSKeyByPackageName: name to match= testdb
got key to webapp= testdb
enter WebAppCompGDSUtil.getDescriptorFromGDSByKey()
About to process the <servlet-mapping> element
GDSvalue name= /System/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /System/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /System/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /System/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /System/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /System/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /System/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /fortune/fortune
GDSvalue val= FortuneServlet
GDSvalue name= /web/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /web/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /web/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /web/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /web/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /web/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /web/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /web/AdderAlias
GDSvalue val= AdderServlet
GDSvalue name= /testdb/testdb
GDSvalue val= testdb
getServletMappingFromGDS: url= /testdb, servlet= testdb
About to process the context-param
[01/Nov/2001 16:00:06:7] info: GDS-007: finished a registry load
About to process the mime-mapping
About to process the servlets
GDSvalue name= testdb
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
GDSvalue name= testdb.jsp
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
The returned hashtable for servlets have: 2 entries
About to process the servlet name= testdb.jsp
About to process the servlet name= testdb
About to process the tld
The returned vector for taglib have: 0 entries
Finished getting a wd from gd s!!!
Now ready to write out WebApp xml file
descriptorToXml: about to get all servlets
Enter getAllServlets,registeredServletNames.size= 2
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
Enter getServletFromGDS
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@76c74b
load-on-startup value from GDS= 0
number-of-singles value from GDS= 10
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
write Xml to output file: web.xml.out
Finished writing out j2ee xml file
Enter getAllServlets,registeredServletNames.size= 2
write Xml to output file: ias-web.xml.out
Finished writing out IAS xml file
Extracting JSPs from testdb.xml to /opt/iplanet/ias6/ias/APPS/
Processing input WAR 1
Processing input WARi 21 testdb.xml
Encountered exception java.util.zip.ZipException processing input file testdHi,
What is the version of app server on HP UX ? How did you deploy on the app
server in HP UX using command line deployment or GUI tool ? Where are these
errors shooting from, are these coming at the time of deployment or thrown at
runtime ? What is the application type that you are trying to deploy ?, if
possible send me the kxs and kjs log files please.
Regards
Raj
lu yanqiang wrote:
My application work fine in iAS SP3 for Win2000, but when I deployed it to
HP-UX 11.0, It can not regist the application in HP-UX.
can any onr help me, thanks
Lu yanqiang
the error message is:
HotSpot VM warning: Setting of property "java.compiler" is ignored
creating engine class space...
loading jx2util...
loading jx2util...done
Connected to LDAP server on websvr.sh-catcher.com port 389
com.kivasoft.engine.EngineClassLoaderNonVersionable: EngineClassLoader
constructer called
com.kivasoft.engine.EngineClassLoaderNonVersionable: ! NVCL CREATED at:
com.kivasoft.engine.EngineClassLoaderNonVersionable@1fbe93
ECS initializing engine class loader instance.
com.kivasoft.engine.EngineClassLoader: EngineClassLoader constructer called
initGDSKey: GDSKey_Base
initGDSKey- just put : com.kivasoft.IGDSKey_Base
key=com.kivasoft.gds.GDSKey@41cd1f
initGDSKey: GDSKey_Root
initGDSKey- just put : com.kivasoft.IGDSKey_Root
key=com.kivasoft.gds.GDSKey@31f71a
initGDSKey: GDSKey_Current
initGDSKey- just put : com.kivasoft.IGDSKey_Current
key=com.kivasoft.gds.GDSKey@5601ea
initGDSKey: GDSKey_CurrentEngine
initGDSKey- just put : com.kivasoft.IGDSKey_CurrentEngine
key=com.kivasoft.gds.GDSKey@17d257
context= com.kivasoft.context.Context@6ee36c
resolve property: GX.path.class GX_CLASSPATH SYSTEM_JAVA null
resolve value: /opt/iplanet/ias6/ias/APPS
resolve property: GX.path.class.core GX_CLASSPATH_CORE SYSTEM_JAVA
java.;com.kivasoft.;gx.
resolve value:
java.;com.kivasoft.;gx.;com.netscape.;javax.;netscape.ldap.;netscape.tooluti
l.
resolve property: GX.versionable GX_VERSIONABLE SYSTEM_JAVA
com.kivasoft.engine.IVersionable
property not in GDS
resolve value: com.kivasoft.engine.IVersionable
resolve property: GX.all.versionable GX_ALL_VERSIONABLE SYSTEM_JAVA 0
property not in GDS
resolve value: 0
resolve property: GX.taskmanager.period GX_TASKMANAGER_PERIOD SYSTEM_JAVA 10
property not in GDS
resolve value: 10
resolve property: GX.versionable.if.extends GX_VERSIONABLE_IF_EXTENDS
SYSTEM_JAVA javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
property not in GDS
resolve value: javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
resolve property: GX.versionable.if.implements GX_VERSIONABLE_IF_IMPLEMENTS
SYSTEM_JAVA javax.servlet.Servlet
property not in GDS
resolve value: javax.servlet.Servlet
class_dir 4 AppPath: /opt/iplanet/ias6/ias/APPS/compiled_jsp
loading component...{7ee76a00-a999-11d1-a16f-006097594151}
getting threadLocal obj
loading component...{91f29740-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread loaded by primordial CL
registered module... com.kivasoft.IModuleThread
loading component...{91f29620-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
loaded by primordial CL
loading component...{ed049d80-b936-1548-e481-080020721767}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
loaded by primordial CL
EJBBinder: binder is GOOD..
EJBBinder: context set obj for IID_IGXEBBinder
loading component...{a84f0507-a912-11cf-aa6c-524153480000}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
loaded by primordial CL
registered module... com.kivasoft.IGDSModule
loading component...{c70f2c00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
loaded by primordial CL
loading component...{c70f2d00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{c70f1a00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule loaded by primordial CL
registered module... com.kivasoft.IPrincipalModule
loading component...{35069f7a-0a09-1406-8f1a-0800208055c0}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37500-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37540-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{be5cfde0-cd9e-11d1-94aa-0060083a5082}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule loaded
by primordial CL
registered module... com.kivasoft.IEBModule
The current input file= testdb.xml
About to start xml -> descriptor conversion process
xmlToDescriptor- file name=testdb.xml
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
servlet name = testdb
!!! parseWebAppFromDOM() just put in setServlet name = testdb
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
!!! handleIASServlet(): Get servlet name= testdb
AppComponentDescriptor: com.netscape.server.deployment.WebAppDescriptor
All EnvEntries name:
All Ejb-refs:
All Resource-refs:
WebApp package name = testdb
Enter setupPluginInfoInGDS()
creating ServletPatternTrans entry, url= /testdb
webapp ContextRoot= null
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
[01/Nov/2001 16:00:04:5] info: GDS-007: finished a registry load
--- now put Web-app component descrptor into GDS
webAppName = testdb
Enter getAllServlets,registeredServletNames.size= 0
Enter getAllServlets,registeredServletNames.size= 0
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@540408
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getClassImpGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Now do some verification step and regenrate the web-app.xml.out file from
GDS data
getWebAppGDSKeyByPackageName: name to match= testdb
got key to webapp= testdb
enter WebAppCompGDSUtil.getDescriptorFromGDSByKey()
About to process the <servlet-mapping> element
GDSvalue name= /System/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /System/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /System/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /System/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /System/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /System/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /System/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /fortune/fortune
GDSvalue val= FortuneServlet
GDSvalue name= /web/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /web/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /web/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /web/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /web/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /web/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /web/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /web/AdderAlias
GDSvalue val= AdderServlet
GDSvalue name= /testdb/testdb
GDSvalue val= testdb
getServletMappingFromGDS: url= /testdb, servlet= testdb
About to process the context-param
[01/Nov/2001 16:00:06:7] info: GDS-007: finished a registry load
About to process the mime-mapping
About to process the servlets
GDSvalue name= testdb
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
GDSvalue name= testdb.jsp
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
The returned hashtable for servlets have: 2 entries
About to process the servlet name= testdb.jsp
About to process the servlet name= testdb
About to process the tld
The returned vector for taglib have: 0 entries
Finished getting a wd from gd s!!!
Now ready to write out WebApp xml file
descriptorToXml: about to get all servlets
Enter getAllServlets,registeredServletNames.size= 2
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
Enter getServletFromGDS
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@76c74b
load-on-startup value from GDS= 0
number-of-singles value from GDS= 10
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
write Xml to output file: web.xml.out
Finished writing out j2ee xml file
Enter getAllServlets,registeredServletNames.size= 2
write Xml to output file: ias-web.xml.out
Finished writing out IAS xml file
Extracting JSPs from testdb.xml to /opt/iplanet/ias6/ias/APPS/
Processing input WAR 1
Processing input WARi 21 testdb.xml
Encountered exception java.util.zip.ZipException processing input file testd -
TREX7.1 - Program not registered
Hi to all experts,
I am implementing TREX7.1 revision 36 (latest) which is standalone, but I encountered the error - program not registered while creating the RFC connection in admin tool. Previously the connection was working but it happens when I switched the RFCSERVER to "single thread (all hosts), deleted the old RFC connection and recreate the new one.
I have tried the following methods:
1. removed TREX and reinstall it again.
2. executed rfcexec u2013g<program id> -a<gateway host name> -x<gateway service> (it seems like nothing has been changed) - I registered it in SAP server, am I correct?
Thanks in advance.
BR,
NancyHi to all experts,
Problem solved once i restarted the SAP server and recreated the RFC connection in TREX server.
Another issue now, when i run the "python runInstallationTest.py", error occurs as below:
--> Check 01: Ping TREX Services
++----
++----
++----
STEP ³³ ACTION ³³ SPECIFICATION ³³ RESULT
++----
++----
++----
++----
++----
++----
Traceback (most recent call last):
File "/usr/sap/TX1/TRX01/exe/python_support/testbase.py", line 709, in run
ret = self.runHandler(*rest, **self.extractInheritedArgs(keys))
File "runInstallationTest.py", line 710, in runHandler
TREX_SHOW_STOPPER, webserver_unreachable, IS_QUEUE_SERVER = ps.ping()
File "runInstallationTest.py", line 275, in ping
services = HostPort4Services().getHostPort4Services()
File "runInstallationTest.py", line 88, in __init__
self.srvs = Services().getServices()
File "runInstallationTest.py", line 69, in getServices
content = Content('TREXDaemon.ini')
File "runInstallationTest.py", line 33, in __init__
self.content = self.getContent()
File "runInstallationTest.py", line 42, in getContent
raise RETURN_CODE(2, msg=msg)
RETURN_CODE: RC_NO_SETTINGS
No SAP_RETRIEVAL_PATH set in environment.
---> TEST ABORTED !!!
Is this test run very important? Any idea what is this problem about?
Many thanks in advance!
BR,
Nancy -
Error 'Program not registered' while testing RFC
Hi
I have created a RFC with type T. When I am testing the same through SM59, I am getting error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <program name>not registered
Error Details LOCATION: SAP-Gateway on host xxxxxx / sapgw01
Error Details DETAIL: TP <program name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 6268
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Jan 27 00:56:55 2009
Error Details VERSION: 2
Can anybody help me in this?
Thanks in advanceSomething helpful related to this
The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su - <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered) -
Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn
Hello All,
While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
our server OS : windows 2008 server
We are getting error while doing connection test in SRM.
This is sm59 connection (TCP/IP ) connection.
Connection Type: T / RFC destination Name: MDM_API_CATALOG
Registered server program: hostname.MDS
I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
I Checked this MDM setup also.
MDS setup
In mdm server go to folder F:\usr\sap\DM1\MDS00\config
Open MDM.ini file in notepad
Add the below 2 entries.
SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
Trusted SAP Systems= XXD
This will enable gateway connection between SRM and MDM and will enable trusted connection.
For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM and also created the same user in MDM with Default role.
Error message:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program XXXXXXXXPRD.MDS not registered
Error Details LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
Error Details DETAIL: TP XXXXXXXXPRD.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 77326
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME:
Error Details VERSION: 2
Procedure Tried
1) This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
2)
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su u2013 <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
In order to do above step 2, we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
3) Already checked the notes sapnote_0000684841
I know that it is generic error..This is happening to specific one of system only.
Thanks
Edited by: saptest2011 on May 20, 2011 5:36 PMHello SM,
Thanks for your quick reply.
Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
But still issue remain there.
The same RFC connection works between SRM sandbox to MDM sandbox.
Only issue with SRM Prod to MDM Prod (newly built system)
difference between MDM Prod and MDM sandbox.
MDM Prod runs: Windows server 2008 OS
MDM Sandbox runs: Windows server 2003 OS
Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
Thanks a lot for your help.
I checked these notes also
Note 353597 - Registering a server program
Note 44844 - No connection to registered RFC program
Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
Thanks
Edited by: saptest2011 on May 23, 2011 5:00 PM
Edited by: saptest2011 on May 23, 2011 5:39 PM -
I get the following error when I test an RFC;
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program BIS_TR9.TRFC not registered
Error Details LOCATION: SAP-Gateway on host cpsaput1 / sapgw61
Error Details DETAIL: TP BIS_TR9.TRFC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 21389
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Aug 22 16:33:49 2007
Error Details VERSION: 2
The Gateway monitor connections to clients has this entry:
242 cpamhq-sbg04 BIS_TR9.TRFC Registered Server cpamhq-sbg04 10.5.1.141 Wed Aug 22 16:34:39 2007 Connection OK
This is a copy of a previous system on the same server with a different system number. It has support package stack 10 with kernel patch number 121.
Thanks,
JoeHello Joe,
From the error logs I can make out two things.
Your SAP resides on cpsaput1 while external program resides on cpamhq-sbg04 .
Now you have done a system copy on cpsaput1 from a SAP system which was connecting fine to the RFC. That connection was going through because SAP details for the old server were correctly maintained at cpamhq-sbg04 but the same has not been done for cpsaput1 . Ask the adminsitrators for cpamhq-sbg04 to make settings for cpsaput1 and then try RFC again.
Regards.
Ruchit. -
Sap to non sap connection ( program not registered/cpic-call
Hi all,
Im trying to connect sap to siebel system.IN TCP/IP connections iv selected register program id & passed the parameters ...program id,gateway host and gateway service
i followed michal krawczyk steps & also checked in smgw
transaction also but program id is not registered there
im getting error like program sapprog not registerd cpic/call
<b>Detailed error</b>
<b>Error</b> - program sapprog is not registsred
<b>location</b> - sap gateway on host saple / sapgw01
<b>detail</b> - Tp sapprog is not register
<b>component</b> - gateway
<b>counter</b> - 387
<b> module</b> -gwr3cpic
<b>line-</b> 1621
<b>return code</b> - 679
<b>subrc</b> - 0
please try to help me out in this issue. all inputs r rewarded.
Regards,
LavanyaHi
Thanks prince,iv checked entries in sm59, i checked smgw tranaction(gateway monitor) for logged on clients
its showing like this
number/luname/tpname/sys.type/hostname/hostaddres/last req
0 /sapnav/sapgw00/local_r3/sapnav.sapdomain.com/192.158.3.219
if i double click on above...
read/write socket = 4
handle = 4
time = tue jan 26 16:54:13 2006
socket = 1652
stat = ni_connected
type = stream ipv4
out = 1122 messages 64 bytes
in = 1 messages 64 bytes
local =127.0.0.1:3300
remote = 127.0.0.1:1848
options =
lu = sapnav
tp = sapgw00
lon lu = sapnav
long tp = sapgw00
ext program = 0
no conversation = 24
appc version = 6
hostaddr[0] =
hostaddr[1] = 127.0.0.1
offset in = 0
timeouts in = 0
connected = tue jan 24
last req = mon jan
request block number in= -1
connection out = -1
target out = -1
offset out = 0
restlen out = 0
timeouts out = 0
request block number out = -1
accept info = einfo
snc forced = 0
<b>just see gateway monitor 4 sapnav/parameters & attributes</b>Profile
parameter Value
gw/max_sleep 20
gw/conn_disconnect 900
gw/conn_pending 60
gw/gw_disconnect 1800
gw/req_stack_size 30
gw/max_conn 500
gw/max_wp 0
gw/max_conn_per_wp 10
gw/cpic_timeout 20
gw/deallocate_timeout 600
gw/reg_timeout 60
gw/reg_lb_level 1
gw/reg_lb_default 20
gw/side_info C:\usr\sap\D01\DVMGS00\data\sideinfo.DAT
gw/sec_info C:\usr\sap\D01\DVMGS00\data\secinfo.DAT
gw/startup C:\usr\sap\D01\DVMGS00\data\gwstartup.DAT
gw/stat 0
gw/tcp_security 1
gw/cpic_security 1
gw/max_sys 300
gw/max_shm_req 50
gw/max_shm_req_per_conn 10
gw/max_overflow_size 5000000
gw/max_overflow_usage 10
gw/keepalive 300
gw/reg_keepalive 300
gw/compatibility 0
gw/monitor 1
gw/netstat_once 1
gw/close_routes 120
gw/timeout 0
gw/internal_timeout 0
gw/nitrace 0
gw/accept_remote_trace_level 1
gw/resolve_timeout 0
rdisp/max_gateways 100
rdisp/max_comm_entries 500
rdisp/sna_gateway sapnav
rdisp/sna_gw_service sapgw00
rdisp/TRACE_LOGGING OFF
gw/rem_start REMOTE_SHELL
gw/remsh rsh
exe/gwrd C:\usr\sap\D01\SYS\exe\run\gwrd.EXE
snc/enable 0
snc/permit_insecure_start 0
Attributes
Release 640
Release no 6400
internal version 2
start time Tue Jan 24 16:53:47 2006
build time Aug 17 2004 23:33:51
build with Unicode TRUE
build with Threads TRUE
gateway hostname sapnav
gateway service sapgw00
req_sync_limit 24
appc_ca_blk_size 34396
gwreq_ln 34588
appcdata_ln 34316
overflow_size_limit 500000
overflow_use 0
trace level 1
trace level external programs 2
PID Gateway Reader 4952
internal version 2
Shared memory Sizes in bytes
CONN_TBL entry 1748
CONN_TBL total 874000
STATISTIC area 1392
iv changed some values for my safety.plz check it and let me know the error to register program id. Hope ull solve my issue this time.
Thanks in advance,
Lavanya.
Maybe you are looking for
-
Pending purchase orders fields required
Hi all, For purchase orders, I need the below mentioned fields. purchasing organization, purchasing group, purchasing document number, purchasing document date and item delivery date. Can any one give me the Table Field Names related to this fields.?
-
What do I have to take a look at?
Hello! I'm going to buy a used G5 Quad tomorrow. What do I have to check? I don't want to buy a fawlty one. Are there any software tests you could recommend? Or any typical G5 diseases? What do I have to check? Thanks in advance!
-
RW Cronacle : JOB_RUN_OUTPUT: R/3 call BAPI_XBP_JOB_JOBLOG_READ failed
Hello everyone, We have a problem with a RFC agent in Cronacle, it cannot connect to the target system, we get this error message : RSUSR000/18073800: opened RSUSR000/18073800: step 1 execution of RSUSR000 RSUSR000/18073800: closed RSUSR000/18073800
-
As I know Oracle do provide a Failsafe Technology on Microsoft NT Clustering Environment. I want to know How can I do the same thing in Linux. OR How Can I ensure that if my Oracle Database Server is down suddenly and I can restart my database servic
-
LR3- don't see any folders or drives in "Export To" - only desktop
When I attempt to Export files, the "Export to: Specific folder" only shows the desktop, and any file folders there. I cannot access any of the drives on the system. I have no trouble seeing all the drives and folders when importing. Using Windows 7,