Line-in input not working correctly in Garageband
Problem:
Line-in input not working correctly with Garageband. Problem occurred AFTER installing and using Blue Yeti USB mic, purchased from the Apple store.
System Details:
'07 20" iMac 2.4GHz 4GB RAM, OSX 10.6.5, Garageband '11 v6.0, Logitech Z4 speakers.
Background:
Before using the Yeti USB mic, I used the line-in jack. I'd connect a Shure mic or guitars directly in, but more recently through a 12 channel mixer. Have connected the Shure mic directly into the input jack, and the computer appears to be picking it up (System Preferences->Sound->Input), it is responding correctly there. Have set the output to the headphone (line-out) jack. When I go into Garageband, I can select from Line-in 1, Line-in 2, and Line-in Stereo. The trouble is that it's the iMac's built-in mic that is active (the one above the screen), not the line-in. I've rebooted the computer, checked the connections, reconnected the Yeti mic and I can't find what's causing the problem. Not sure what to do from here, need some help. Thanks
I have Logic Express on the iMac as well and I worked out how to set the input device back to the Line-In. I went back to Garageband and found the equivalent setting under Preferences->Audio/MIDI. Thanks for reading, sorry I didn't sort it out sooner! Merry Christmas!
Similar Messages
-
Screen Not Working Correctly- Horizontal Lines
For the past few weeks, when I open my computer, sometimes the bottom half of my screen is just a lot of lines or is not working correctly. Sometimes if I tilt the screen enough, it will go away. But I don't know what to do!
First step in user troubleshooting is to turn the phone off and back on. If that doesn't help, then a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will restart. If this does not solve it, then a restore from backup, and finally if necessary, a restore as a new device.
You do not indicate what iPhone version you have. You also do not say if the phone has been dropped or any user damage to the screen. If anything, you can make an appointment with the Apple Store Genius bar to get the hardware checked. -
My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
Key Figure calculation in Abap is not working correctly - Overlooping
Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
LOOP AT t_newdso.
t_data-prod = t_newdso-/bic/znew_mp.
t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
APPEND t_data.
ENDLOOP.
ELSE.
REFRESH t_olddso.
SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
data_package-prod.
SORT t_olddso BY prod.
READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
t_data-prod = t_olddso-prod.
t_data-material = t_olddso-material.
APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tagsHi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM -
System Update not working correctly
Hi forum,
System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
1: Not detecting old versions
SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
2: Not installing a suggested update
Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
Regards
AH_DEDear Herik,
thanks for your answer.
I checked the log file and found thousands of entries. Here are the lines related to "Fix for ...".
Info 2010-02-03 , 08:40:37
bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
Info 2010-02-03 , 08:40:43
bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
Message: Candidate list:
Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
Info 2010-02-03 , 08:40:57
bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
Info 2010-02-03 , 08:40:57
bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
Info 2010-02-03 , 08:40:57
bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
ADDITIONAL ENTRIES
Info 2010-02-03 , 08:40:57
bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
Message: System updated:
Installed=0
Not Installed=Tvsu.Beans.Update[]
Deferred=0
Download Failed=0
Hidden=0
Severe 2010-02-03 , 08:41:17
bei Tvsu.Sdk.SuSdk.ShutDownApplication()
Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Since I'm a normal user only, I can't interprete this information. Do you know what to do?
Kind Regards
AH_DE -
Program not working correctly-Help!
class Sort
/* method takes an array of integers as an input,
* and returns a copy with the element values sorted
* by select method.
int[] selectSort(int[] input)
/*declare variables to be used in array */
int x, y, max, temp;
int[] select = new int[input.length];
/*This loop reads the entire array */
for(x = input.length - 1; x>0; x--)
max = 0;
/*This loop checks to see if any number is
lower possible greatest number /
for(y = 0; y <= x; y++)
{//Returns number if lowest number
if(input[y] > input[max])
max = y;
}//end of if statement
}//end of inner loop
/*Switches the values */
temp = input[x];
select[x] = input[max];
select[max] = temp;
}//end of outer loop
return select;
} //end of selectSort()
/* method takes an array of integers as an input,
* and returns a copy with the element values sorted
* by bubble method.
int[] bubbleSort(int[] input)
int[] bubble = new int[input.length];
for (int x = 1; x < input.length; x++)
for (int y = 0; y < input.length - 1; y++)
if (input[y] > input[y+1])
int temp = input[y];
bubble[y] = input[y+1];
bubble[y+1] = temp;
return bubble;
} //end of bubbleSort
**********************Test Class**********************
class TestSort
public static void main(String[] args)
/* count variable used as loop counter when
* result table display is generated
int count;
/* variable for object of class Sort */
Sort x;
/* create object of class GroupEx2 */
x = new Sort();
/* create a source array of integer elements */
int[] y = new int[5];
/* assign values to array elements to be sorted */
y[0] = 8;
y[1] = 5;
y[2] = 3;
y[3] = 9;
y[4] = 1;
/* create variable for target of select sort array */
int[] ss;
/* create variable for target bubble sort array */
int[] bs;
/* call method to return an array with element values select sorted*/
ss = x.selectSort(y);
/* call method to return an array with element values bubble sorted*/
bs = x.bubbleSort(y);
/* display original and sorted arrays in three columns*/
System.out.print("Input Array" + "\t");
System.out.print("Select Sort" + "\t");
System.out.println("Bubble Sort");
for (count = 0; count < y.length; count++)
/* Column 1: original array */
System.out.print("input[" + count + "] = " + y[count]);
/* tab between columns 1 and 2 */
System.out.print("\t");
/* Column 2: select sorted array */
System.out.print("select[" + count + "] = " + ss[count]);
/* tab between columns */
System.out.print("\t");
/* Column 3: bubble sorted array */
System.out.println("bubble[" + count + "] = " + bs[count]);
} // end of display for loop
} // end of main()
} // end of class TestSortThanks for the Bash! I'm surprised you had the time
for it.Go back and look at your original post. A whole bunch of code, and the only description of the problem is "not working correctly." Do you honestly think that's a reasonable way to ask for help? Do you go to the doctor and say, "I'm sick" and then just wait for him to cure you? Do you take your care to the mechanic and say only, "It's broke"?
Look, this is your problem and it's your responsibility to fix it. There are people here who are happy to help you, but it's up to you to provide a reasonable statement of what's wrong, what you've tried, what you don't understand. For instance:
Does it compile? If not, post the complete error message.
Does it run, but throw an exception? If so, post the stack trace.
Does it not throw an exception, but not behave the way you expect? Then describe the expected beavior and the observed behavior.
Do you really need to be told this stuff? It seems like common sense that when you're asking people to spend their time helping you, you should give them the information they need to be able to do so. -
[solved] NFS client will not work correctly
I have all my $HOME on an NFS Server. So long I used suse and debian, now I want switch to arch but the nfs-client ist not working correctly:
I start "portmap nfslock nfsd netfs" over rc.conf. When I do a "rpcinfo -p <ip-arch-system>" I got the following
stefan:/home/stefan # rpcinfo -p 192.168.123.3
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100021 1 tcp 48988 nlockmgr
100021 3 tcp 48988 nlockmgr
100021 4 tcp 48988 nlockmgr
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 3 udp 891 mountd
100005 3 tcp 894 mountd
As you see "status" is missing, so the statd is not running. It sould look like the result on my suse box:
stefan:/home/stefan # rpcinfo -p 192.168.123.2
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32768 status
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100024 1 tcp 35804 status
100021 1 tcp 35804 nlockmgr
100021 3 tcp 35804 nlockmgr
100021 4 tcp 35804 nlockmgr
There is the "status" line and so the statd is running.
How can I fix that problem, so that statd ist running on my arch box too?
Last edited by stka (2007-06-10 15:59:48)The Problem ist solved.
I use ldap for authentication. During the setup of the ldapclient I copied the nsswitch.ldap to nsswitch.conf. But the line for "hosts:" was:
hosts: dns ldap
but in my dns ist no localhost entry. After I changed this line to:
hosts: files dns ldap
everything was ok. The statd is now running and I can start to migrate to archlinux ;-) -
Sonata font on MacOS - not working correctly
Hi,
I just downloaded and installed the Sonata Standard OpenType file via FontBook in MacOS 10.9.2. So far the font is not working correctly in either MS Word or Apple Keynote -- I get standard qwerty letters rather than musical notation. Anyone ideas on how to fix/troubleshoot?
Thanks!Hello RKmark,
Thank you for going through the process of using those custom keyboard layouts. It was my pleasure to work on those some years ago.
There is a reason why the placement of some characters on those custom layouts seems arbitrary: They were intended to replace the experience a user would have when using the same PostScript font, which was directly mapped to the characters available on the keyboard. Of course they could be re-arranged today – but that would mean opening a whole different project; and would probably question some of the semantics within Sonata.
Back to your problem:
I just tested the keyboard layout for Sonata, together with the Sonata OTF in InDesign, and I did not find any problems.
Of course this does not help you. So let me just describe what I did:
I copied the OTF file, to ~/Library/Fonts
I copied SonataStd.keylayout to ~/Library/Keyboard Layouts
Admittedly, in OSX Mavericks it is a bit more complicated to install a custom keyboard layout:
In System Preferences, go to Keyboard and Input Sources.
Click the + button at the bottom left, scroll down the list and select “Others”.
In the list to the right, you will find a “SonataStd” keyboard layout, it has a grey icon. Click Add.
After adding this layout, you will be taken back on the Input Sources screen. Check the box next to Show Input in menu in menu bar if it is not yet active.
Back in InDesign, create a new text box, select SonataStd, and choose the SonataStd keyboard layout from the menu bar (marked by the flag of the country representing your keyboard).
Now you can begin typing. I could type the sixteenth-note-rest on a US keyboard with alt-x.
However, one thing I have observed:
If you have set any custom keyboard shortcuts in InDesign that are using the alt-key; they might get in the way of typing some of the symbols.
Which of the available symbols in Sonata are you missing in the custom keyboard layout? I tested them all, and could type everything.
What sometimes happens is that the keyboard layout will switch back to default (US in my case), which then looks like the Sonata keyboard layout is not working.
My personal opinion on this: The keyboard layouts are a nice idea for making glyphs accessible to users that don’t have a glyph palette, but they can be very confusing. They will interfere with the normal usage of the application and OS, since standard keyboard shortcuts will no longer work – simply because they rely on the standard keyboard layout of your system.
Personally, I would use the glyph palette in most cases, simply because switching keyboard layouts back and fort would get to tedious for me.
I hope this helps, let me know if you have any further questions. -
Sorting not working correctly for date field in alv report
Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work -
If statement within a view is not working correctly ?
Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
</htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias HlubekMatthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian -
** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)
Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric fieldHi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
wls_fieldcat-col_pos = wpv_pos.
wls_fieldcat-fieldname = wpv_champ.
wls_fieldcat-tabname = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
wls_fieldcat-seltext_l = wpv_libelle.
wls_fieldcat-ddictxt = 'L'.
wls_fieldcat-no_out = wv_no_out.
APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P. -
Email pushing not working correctly for office email - 3 seperate devices/carriers
We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin TalbotPotential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile] -
Not sure why line break is not working
Hi all,
Here is part of my simple Swing application:
String text1 = "hello";
String text2 = "world";
String text3 = text1+"\n"+text2;
// have also tried (String text3 = text1+"\n\r"+text2;)
displayField.setText(text3);I supposed that the text3 in the label field (displayField) would display like this:
hello
world
But not, the text3 just displayed in the same line like this instead: helloworld.
I am not sure why the line break is not working.Use HTML for a multiline JLabel.// String text3 = text1+"\n"+text2;
String text3 = "<html>" + text1 + "<br/>" + text2 + "</html>";db -
i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?
Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/ -
SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer
I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">TAB delimited</Name>
</OverrideNames>
<Configuration>
<DeviceInfo>
<FieldDelimiter xml:space="preserve">	</FieldDelimiter>
<Encoding>ASCII</Encoding>
<UseFormattedValues>False</UseFormattedValues>
<NoHeader>False</NoHeader>
<FileExtension>TXT</FileExtension>
</DeviceInfo>
</Configuration>
</Extension>Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
Maybe you are looking for
-
An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?
-
Copy rule for TExt from Inter company po to delivery
Hi All, We are using inter company stock transfer. The flow as mentioned below. Inter Company PO - All the text maintain in the PO - ME21N Delivery / PGI - VL10B Inter Company Invoice. Now is it possible to text which entered in the PO should copy in
-
Which Camera Raw functions are in Photoshop Elements?
At times I'll suggest something to do in ACR in conversations with other photographers. Sometimes I get a response that they can't find what I referred to in ACR. Usually turns out they are using Elements (PSE), which has a subset of ACR function.
-
i hv installed oracle 10g on windows xp i have done local intranet settings - i.e. 127.0.0.1 but Home page is displayed sometimes and sometimes it gives DNS error -page can not be displayed sometimes it gives resource not found also oracle port is no
-
How to download my icloud music to samsung tab s
I have my music from my iPad in the icloud but would like help in getting it on to my Samsung tab style Thank you for any advice you can give me. ...Dan