Line-in mic doesn't work; both preferences selected

I can't get a Line-in microphone to work on imovie VO, or elsewhere.
I've selected Line-in on both the Personal Preferences and the preferences on imovie.
And I've tried two different new microphone headsets.
Can someone please tell what I'm doing wrong?

Pieter,
I'm not at my big Mac right now (..the one with iMovie '08..) and so I can't test things: I'm travelling with my G4 PowerBook laptop, and iMovie '08 isn't (..can't be..) installed on that. So I can't test this for you; sorry.
I don't remember having had a problem with audio input in iMovie '08, but maybe someone else can give you more info. (I think I've used a Saffire FireWire input device, and condenser mic, with iM'08, but can't remember the details right now.)
It may be that the 'GarageBand Fix' might help: go to GarageBand, play a few notes on a virtual instrument, then quit GB. That may reset the audio to its proper settings. And as Klaus1 always recommends.. "Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz."
I'm sorry that I can't presently help any more than that..

Similar Messages

  • USB mic doesn't work on MBP?

    After reading a ton of threads here on the audio-in issue (the MacBook Pro doesn't accept a mic-level input, only a line-level input) I came to the conclusion I would need either a pre-amp or a USB mic. I chose the latter, thinking it's better to have just 2 pieces of equipment (the laptop and the mic) rather than 3 (laptop, mic, pre-amp). I bought a Nady USB 24M only to find out it's not recording audio either.
    So I'm not sure if:
    A) the mic doesn't work
    B) the line-in input on the laptop doesn't work
    C) I have a setting off somewhere
    or
    D) I misunderstood that a USB mic would work with a laptop
    The mic's promotional materials say it "connects directly to any computer with a USB 2.0 input port for easy plug-and-play operation." That's really what I need "easy plug-and-play operation."
    I'm trying to record audio in Quicktime using "New Audio Recording." In QT preferences, I've tried both "Built-In Input: Line In" and "C-Media USB Headphone Set." I've tried plugging a mic with phantom power into the line-in (to no avail) and I've tried the USB mic (again nothing). Am I doing something wrong?
    Any thoughts or suggestions would be appreciated. Thanks.
    - Mark

    I have a 2.4 gHz MacBook Pro and use an Altec Lansing AHS302usb mic for external mic input during online gaming. It is actually a USB 2.0 mic and headphone combination that works in Windows XP via BootCamp and also in Mac OS X. I have successfully used this mic in BootCamp (Windows XP) for gaming in Battlefield 2142. Works fine - no problems at all. Windows and Mac OS both auto configure to use this external mic and headphones automatically when the USB connector is plugged in.

  • A mic doesn't work. Adobe Flash Player camera and microphone exceptions are different. Please, help!

    Hello!
    The trouble began in Google Hangouts on Air. When I'm in conference room I read that my mic doesn't work. I checked settings, chose "default" one time and my microphone name another time. Both variants don't help. On the right end of an address bar I read this message: "this page has been blocked from accessing your camera and microphone". I clicked it, chose "Allow", after reloading the problem returns. Then I went to Chrome exceptions and allowed my mic on the site.
    In Chrome exceptions menu I read this: "Adobe Flash Player camera and microphone exceptions are different". Though I chose "Allow" in Chrome I can't do it Fllash Player. I did all the instructions which are given to solve audio problems, but it didn’t help. I also wanted to allow excess for my mic on “Website Privacy Settings Panel”, but I can’t find https://plus.google.com in the list to allow (attach a screenshot). I’m out of ideas what else to do. Please, help!

    Hello!
    The trouble began in Google Hangouts on Air. When I'm in conference room I read that my mic doesn't work. I checked settings, chose "default" one time and my microphone name another time. Both variants don't help. On the right end of an address bar I read this message: "this page has been blocked from accessing your camera and microphone". I clicked it, chose "Allow", after reloading the problem returns. Then I went to Chrome exceptions and allowed my mic on the site.
    In Chrome exceptions menu I read this: "Adobe Flash Player camera and microphone exceptions are different". Though I chose "Allow" in Chrome I can't do it Fllash Player. I did all the instructions which are given to solve audio problems, but it didn’t help. I also wanted to allow excess for my mic on “Website Privacy Settings Panel”, but I can’t find https://plus.google.com in the list to allow (attach a screenshot). I’m out of ideas what else to do. Please, help!

  • Is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

    is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

    is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

  • I've gotten 60 or 70 messages that that my iCloud doesn't work and to select preferences.  The message says I will get an email to verify but I never get an email.  I've checked old email, blocked email, and have low filters on emails.  Any ideas?

    've gotten 60 or 70 messages that that my iCloud doesn't work and to select preferences.  The message says I will get an email to verify but I never get an email.  I've checked old email, blocked email, and have low filters on emails.  Any ideas?

    Hey CarolinQc,
    Thanks for the question. The symptoms you are experiencing can result from an Apple ID address that has been changed prior to signing out of all of the services. Before you change the email address associated with your Apple ID, you’ll want to sign out of all services to avoid this. As a fix, you can temporarily change your Apple ID back to the old address:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    2. Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
              - Scroll down and tap Delete Account, then tap Delete to confirm.
              - Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
              - Enter the password for your previous Apple ID.
    3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    4. Return to Settings > iCloud and sign in with your new Apple ID.
    Additional Information:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Thanks,
    Matt M.

  • Just reinstalled OS 10.6 and updated to 10.6.8 and internal mic doesn't work...

    I reinstalled the system to try and fix the DVD player, which was refusing to play most (but not all) my DVD's... the new system didn't fix the DVD problem and now the mic doesn't work either!!??!?!?!
    Any ideas?

    OK, I don't think I'll be starting that tonight though, might try it later in the week. Thanks very much for the advice, kind of what I expected, just hoped for an easier solution! Mac always seems to go back to "whipe it and start again" - you'd think there'd be some targetted system app testing tool that would help identify probably causes... but there we are, rant over, thanks for the help.

  • Dock Plus Series 3, Mic doesn`t work

    As I use Skype a lot, I bought Dock Plus Series 3 to solve the issue with mic jack at Lenovo`s stupid engeneeres "designed" for t420s model. No one profesional pmanufacture produces mic for this kind of jack, and it is always Pain in the Ass to connect external mic to the machine. 
    Dock Plus Series 3 has normal, industry standard mic jack. I hope it will soleve the issue. But it is not! No one mic  doesn`t work if i plug it  Dock Plus Series 3. Please advice, how to make it works!
    PLEEEEEEEEEEEEASE !

    Hey Baramburum,
    I could not find any drivers for your docking station, what I can suggest is that you update your audio drives from the link below and you update your BIOS. If you do the update please remove the old drivers first completely and then install the new ones.
    Audio driver:              http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014918
    BIOS:              http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014992
    Best Regards,
    Hiro
    Did you find a post Awesome? A response just Outstanding? Kudo them!
    Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a pat on the back for helping you out!

  • T400 Internal mic doesn't work

    brandnew T400, 2 Duo P8700.
    The internal mic doesn't work.  I tried to use the sound recorder, and there is no voice.
    I clicked      control panel->sound-> recording,   then the screen displays the  interanl Microphone is working.  but when I use the sound recorder, still nothing recorded.
    Then I double clicked  the internal microphone -> levels, the drag the bar of microphone and microphone boost all to the very right.  Still the internal microphone doesnt  work.
    The speaker is working fine. It is a brandnew laptop.

    Good suggestion on removing the driver then clean install the simple driver.
    I have been having the same problem with recent new releases of the Conexant Audio Driver for HD on a T500.
    Not sure when tech support will get around to fixing the problem. I have tried every combination of Add/Remove, Device Manager Remove, and even Rollback, but the problem persists... The internal microphone gets muted no matter what one does in configuration. You can get playback of audio from CDs and audio files, but the microphone gets disconnected from the system when you install the latest versions.
    The following versions will disconnect the internal microphone in T500s:
           v 3.64.10.0
           v 3.64.10.51    (the latest release)
    The only stable version appears to be v 3.64.7.0 for T500s.
    IBM Lenovo does appear to post previous versions of all Conexant Audio Drivers.
    I got lucky, since I keep copies of all previous installs available in order to revert back to a version that is stable.
    The suggestion made by this board to install the simple Conexant driver (v 3.53.0.0) is appropriate.
    Thanks for the link. I am keeping a copy handy just in case.

  • Mic doesn't work after upgrade to iOS 7.0.2 ? go to settings privacy microphones and allow access( green button) to apps This worked for me

    Mic doesn't work on iPad 2 after upgrade to ios7.0.2? Go to settings / privacy/ microphones. Then allow access to relevant apps (green button)
    This worked for me on skype, vocal live, mic pro apps

    Can't believe this worked! I had same issue since upgrade, searched web, found this... Hoover the mic for around 15 seconds... It only flaming well worked!  

  • In-line mic doesn't work

    I want to speak through the Apple headset (earphone with mic on it) but it doesn't work. I chose 'line in'.

    I bought mine earlier this year, before the newer one came out.
    Funny thing is, I can choose to speak into the mic on the Apple earphone when I used Windows by Parallels.
    Message was edited by: shroudlupe

  • My Help Viewer doesn't work properly-The selected topic is currently unavailable Make sure you're connected to the Internet. For help connecting, choose Apple menu System Preferences, click Network, and click "Assist me." If you're connected to the Inte

     

    Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Caches/com.apple.helpd
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
    If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
    A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • M1330 mic doesn't work

    Hi!!
    I bought the wonderful Dell XPS m1330 and almost everything works.
    One of the essential features that doesn't work is my microphone. I saw the wiki page and I didn't try yet to recompile alsa because my speakers work well and I don't want make a mess.
    Any idea from who got this pc?
    Solved!! In KDE(mod4) to have the mic working you have to set the mixer like in this screen:
    http://img219.imageshack.us/img219/5609/mictm5.png
    If you lack something just go in Settings --> Channels and there you can enable the other bars.
    Last edited by Darkarix (2008-09-20 17:50:47)

    Can't believe this worked! I had same issue since upgrade, searched web, found this... Hoover the mic for around 15 seconds... It only flaming well worked!  

  • My Mic Doesn't Work for Windows 7!

    My laptop Model is a Satellite M305-S4910 I just last week got my laptop upgraded to Windows 7, but when I use video chat on MSN Messenger or Skype or any type of Audio Recording it doesn't work, or when chatting it seems like my voice is from a far distance, Please I need help, It's the only why for me and my boyfriend to talk from overseas, I really need this mic to work Please help me
    Thank You

    Thanks Chen, but still the same result. 
    I'll narrow down the scenario(actually two scenarios) as per the way it's behaving on Windows 7 machines.
    Case - 1
    1. I do a SetEnvironmentVariable remotely.
    2. I go to that remote machine and search in advanced settings -> system env variables window. Dont click on the OK Button.  Close these windows.
    Result: Yes it is there as an entry.
    3. I open up a command prompt and type 'set'
    Result: No it is not set.
    4. Again open up advanced settings -> system env variables window. Click on the OK Button.  Close these windows.
    5. Now open up a command prompt window and type 'set'
    Result: It is set now
    Case 2:
    1. I do a SetEnvironmentVariable remotely.
    2. I go to that remote machine and search in advanced settings -> system env variables window. Dont click on the OK Button.  Close these windows.
    Result: Yes it is there as an entry.
    3. I open up a command prompt and type 'set'
    Result: No it is not set.
    4. I do a system restart.
    5. Open up a command prompt and type 'set'
    Result: It is set now
    Any idea why this is behaving like this(more or less like setting a user level env variable), please  ? I've to some way get through this obstacle to advance further. Thanks a lot for the support

  • Wireless suddenly doesn't work, both in OSX and windows 7

    I have got a new model of MacBook Pro 13-inch. Everything work fine until one day I found the wireless suddenly didn't work, both in OSX and windows 7(boot camp.)
    I tried my USB-wireless adapter on macbook, it works fine.
    In bootcamped windows 7, I have uninstalled and re-install the wireless adapter, still doesn't work.
    Actually it can find the wireless networks but cannot join them.
    I need to mention before then I kept play heavy games like starcraft2 frequently, and macbook got so hot during playing, so maybe the wireless module was damaged by heat somehow??
    Seeking for help ~~~
    Message was edited by: demax
    Message was edited by: demax

    Seems I'm pretty annoying but I need to post again because I found something interesting: once I plug my external monitor to the macbook, the wireless strikes, and once I plug out the monitor, wireless recovers... Anyone has any idea?
    Message was edited by: demax

  • Headset mic doesn't work on ventrilo

    Everything seems to work fine on Vent, just the mic side is what i'm having problems with. I can hear everyone else, I just cant seem to get my "mic speaker" to light up when I talk.
    any ideas?
    PS: same goes for Teamspeak as well.

    We've cleaned the mic several times, didn't make a difference. And the mic doe run for recording, sounds fine. it;s only on calls it doesn't work.

Maybe you are looking for

  • Problem With Model

    Hai,    I am Using WebServices as Models For my WebDynPro Project. If any change occured in web service then my webdynpro is not working . how to update webservice model. regards, Naga Raju

  • Why does Tiger always mount Time Capsule disks automatically?

    I have a Time Capsule (early 2009) with wireless connections to an iMac running OS 10.5.7 Leopard and a PowerBook G4 running OS 10.4.11 Tiger. The G4 always automatically mounts on the desktop the TC Data disk (i.e., backup volume disk) and any disks

  • DW Error exporting site w/out markup

    Hello, I'm trying to export my website without markup and I keep getting the following error: "While executing onLoad in ExtractTemplateXML.htm, a javascript error occurred" Does anybody how to fix this? Thanks in advance. PS. I used to be able to do

  • Config Guide/doc for TMW

    Hi, I m configuring TMW for the first time. Looking at the IMG nodes under Time Manager's Workplace, I am confused what all nodes to touch and what all need not be touched. Can anybody please help me with some guide to configure TMW ? it would be gre

  • Synch with e2 and laptop

    When I bought the e2 (may or june 2010), it wouldn't synch with my laptop.  I went to the web and found a program that enabled me to synch,  It worked fine until 13 December 2010.  I have been trying to figure it out, and can't remember what program