Line-in recording with microph

Greetings all
I have MuVo Micro mp3 player with line-in connector.
To use it for recording with microphone you need a pre-amped microphone.
I have one, battery powered electred condensor microphone, which I succesfully used before with MD-player (over line-in too). But it does not go with the Creative mp3 player. I do not know why?
Can you tell me if I need to switch an additionally amplifier between the line-in connector and the microphone or is there any other battery powered microphone to buy which will go with Creative mp3 player?
Thanks for any apply
Patrick

And that goes for playback too. No sound through speakers using the Line-in unless the red buttoned mutes are turned of in Audio Creation mode. That doesn't seem right. Playback from the Line-in should work from any mode. Am I doing something wrong?

Similar Messages

  • Line in Recording with Sblive 24

    Can anyone recommend the right settings in the surround mixer, For good quality line in recordings? Right now my line in record slider is set at 70%, The line in is 70% and the master is at 70%.
    Thankyou for your time.. shaiwill
    Windows xp sp2
    Sbli've 24bit

    shaiwill,
    If those volume settings work for you, then those are the right settings. I think one important goal is to set the volume sliders so that you don't clip what you're recording. Some people recommend keeping the volume below 90% to avoid saturation, by which I think they mean clipping, but it depends on the level of the source too. If you can replay your recording source and have the Creative Wavestudio or some other recording software with a volume level meter, then on a first pass you can monitor your recording source and set the volume so that you get all the highs and lows. Then on a second pass, you should be able to make a perfect recording.

  • Zen V plus line in recording with 10 minute tra

    I just purchased a zen v plus specifically for recording certain programs using the line in recorder. The programs are generally /2 to 3 hours long. The problem I have is that the line in recorder breaks up the recording into 0 minute tracks. Is there a way to program or adjust the setting,so that it's not broken up into tracks?
    Thanks

    When you record a track, the recorded track is automatically named LINE followed by the date and time of the recording ( LINE YYYY-MM-DD HH:MM:SS ). For example, if you recorded a track on March 5, 2004 at 2:57 pm, the track is named >LINE 2004-03-5 4:57:00 . You can just extract the recorded track from the player and rename it when you have it connected to your computer.

  • How do I monitor my 'line-in' recording with my Sound Blaster USB Mp3

    I'm recording tracts of my band from a MD via line in. How do I monitor what's being recorded (in real time)?
    Sound Blaster USB Mp3+
    Thanks,
    Mike

    my problem seems similar to prior post.
    I have attached Creative USB Sound Blaser MP3+ a.k.a. SB0270 to a Compaq Presario 700 lap top computer via its USB .0 port. I'm running WinXP Home with SR-2 update.
    I have found that I CAN record audio using Creative's Wave Studio by first selecting "Line-In" in Microsoft's "Volume Control" software Options/Properties/Recording. "Line-In" then appears as the label on the record level control in Creative's Wave Studio. This was not the intuiti've choice as music fed in through a USB port supposedly uses the SPDIF (Sony Phillips Digital Interface Format). Selecting the SPDIF in Microsoft's "volume control" doesn't work.
    However, although I can record the audio, I can not find any way to monitor the level of the audio while recording. When recording using Creative's Wave Studio, an indicator (lower left of screen) shows it is in the recording mode, but the level indicator is a straight line at zero / baseline. Furthermore, the input signal can not of been too small to be seen, because the graph shows nearly full modulation on playback.
    How does one monitor the recording level while recording?

  • Printing only one line record with total of all items through alv

    hi experts,
    i am facing a problem while printing a list through alv.
    requirement is, suppose i have 3 line items under one document no.
    i have to print only one record with total amount of all items.more clearly...
    1001  10  1000/-
    1001  20    234/-
    1001  30   540/- these records in internal table then i am passing it to reuse_alv_grid_display.
    i need to display only 1001  1774/-(means sum of all the items)
    please tell me how to do this.
    thanks in advance,
    manasi

    hi ansari,
    contains in itab
         3000000004     02.11.2000     5550     27.95     27.95     0
         3000000004     02.11.2000     5550     10.95     10.95     0
         3000000005     02.11.2000     5550     27.95     27.95     0
         3000000005     02.11.2000     5550     10.95     10.95     0
         3000000006     02.11.2000     3020     52.99     52.99     0
         3000000006     02.11.2000     3020     64.99     64.99     0
         3000000006     02.11.2000     3020     49.5     49.5     0
         3000000007     02.11.2000     3730     2,228.00     2,228.00     0
         3000000007     02.11.2000     3730     1,698.00     1,698.00     0
         3000000007     02.11.2000     3730     532     532     0
    now please tell me how to print the data
    output will be
    3000000004     02.11.2000     5550     38.90     38.90       0
    3000000005     02.11.2000     5550     38.90     38.90       0
    3000000006     02.11.2000     3020     117.19     117.19     0
    like that
    please help me out
    manasi

  • Want to use "LINE-IN" but keeps recording with "BUILT-IN MICROPHONE"?

    Set up Mac>System Preferences>Sound and choose LINE-IN......check!
    Set up Audio MIDI setup default to Built-in Line-in, NOT microphone...check??
    okay.. i've been trying to record with a microphone that i have.
    i did everything i could to NOT record with the built-in mic.
    hasnt succeeded. I do not know what to do..
    I see other ppl with the same problem:
    http://discussions.apple.com/thread.jspa?messageID=6418401
    http://logicprohelp.com/viewtopic.php?p=19933&sid=cc5a97a30c63560ba8793515ecc5c1 91
    No real helpful answer.

    If I am not wrong, you need data from SQL tables in form of
    XML. Then you can get that straight from SQL by using FOR XML
    clause. FOR XML modes can be of 3 types RAW, AUTO or EXPLICIT. You
    can use the mode as per your need.
    For more information, please visit the link below:
    http://msdn2.microsoft.com/en-us/library/ms345137.aspx
    Thanks

  • Audio line in while recording with ipod touch

    Looking at buying a 5th Gen touch to record local basketball games.  Need the ability to record the audio live broadcast into my live video of the game so I am wondering if I can use the video camera of the touch and record a seperate audio track with the video being recorded with a line in option.  I have used a sd camcorder with a line in capability playing the local radio station audio as I record but dont know it this can be done with a ipod touch.  I could use the camera app or imovie app to record but not sure if separate audio track is possible with them or will it just record from the mic of the ipod touch?

    You can connect a mic to the iPod via the headphone jack and that mic will be used by the video app you use for the video camera on the iPod. I do not remember if the built-in mic gets cut off when yo do that so you may have to cover the mic hole on the iPod.

  • Loading Hex Files with multiple records with each line starting with : record marker, how do I load this hex file into a front panel table ? thanks in advance, Jeff.

    I have written a routine that loads a Hex file, checks for record marker,length,address etc then loads the data into a table on front panel. However, my routine only loads single record hex files. I need to be able to load multiple record files, I need to identify the ':' colon record marker start for each record in the hex file, I just can't see how to loop my routine so that all records with ':' prefix marker are loaded.

    Jeff,
    I'm not exactly sure of what you are trying to do. Is it possible you could post your code, or a screen shot of the diagram in question, so that I can get a better understanding, and possibly offer some assistance?
    I am familiar with hex files, but not with the : marker separating records. This may be able to be solved with simple text parsing, and as I am not familiar with how you are retrieving and/or displaying the files, I require more information.
    Thanks

  • How to make plant default on the line item along with the item category

    Hi All,
    I want to default Plant on the line item along with the item category.In order to meet the following scnario.
    1. I have two plants,first plant is maintained for the valuated item and the second plant is maintained for the non valuated item (Free Goods).
    Whenever user is entering an item in the sales order for which corresponding free goods item is maintained in the master record.System is proposing two lines items in the sales order.
    First line item is the main item which appears along with the Plant 1 which contains valuated items
    Second line item is for the Free of charge item which is being proposed from Plant 2, which contains the non valuated items.
    I want that the system should always propose Plant 1 with main item and Plant 2 with the Free of Charge item by default. (Along with the item category TAN and TANN)
    Rahul

    Delivering Plant is determined in the following order
    1. Customer material info record.
    2. Customer master
    3. Material master.
    Use one of them an default your plant.
    I think in your case you can use the materila master which will give an item level plant different. The other two will default the plant at the header level.
    regards
    jude

  • 2lis_02_scl extract records with wrong posting date for Good Receipts.

    Hi Experts,
    We are currently having issue of mismatch between BW Schedule Line data with R/3 values for the Goods Receipts posting date updating incorrectly in to BW.
    Example.
    In table EKBE purchase order history we have following records.
    MANDT EBELN        EBELP   ZEKKN VGABE GJAHR BELNR      BUZEI BEWTP BWART BUDAT      MENGE
    501   5600453404   00010   00    1     2010  5012473031 0001  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012473031 0002  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012473031 0003  E     101   23.01.2010        1.250,000
    501   5600453404   00010   00    1     2010  5012693310 0001  E     101   26.02.2010        1.250,000
    Which means we have on posting date of 23.01.2010 1250*3 i.e. 3750 quantity of Goods Receipts.
    However when we check the extractor we get multiple records in internal table C_T_DATA and in psa.
    Line BWV ETENR   SLFDT              MENGE    ROCA BEDAT                            BUDAT          EBELN
           ORG                                                        NCEL
    1     001     0001     20100125     3750.000          20100113     ZNB     F     00000000     5600453404
    2     001     0002     20100226     1250.000          20100113     ZNB     F     00000000     5600453404
    3     002     0001     20100125     3750.000     X     20100113     ZNB     F     20100123     5600453404
    4     002     0001     20100125     3750.000          20100113     ZNB     F     20100123     5600453404
    5     003     0001     20100125     3750.000     X     20100113     ZNB     F     20100127     5600453404
    6     003     0001     20100125     3750.000          20100113     ZNB     F     20100127     5600453404
    7     002     0001     20100125     3750.000     X     20100113     ZNB     F     20100226     5600453404
    8     002     0001     20100125     3750.000          20100113     ZNB     F     20100226     5600453404
    9     002     0002     20100226     1250.000     X     20100113     ZNB     F     20100226     5600453404
    As can be seen we have record no 8 for ETENR (Schedule line 1) with posting date 26.02.2010 and another record with posting date 23.01.2010.
    Since we are getting 2 records the record with incorrect posting date overwrites the record with correct one.
    Any idea if this could be a standard extractor problem or any other way to resolve this issue.
    Any help would be appreciated.

    First of all, are you using a staging DSO? (You should ideally)
    If yes, is it a Write Optimized DSO? (Again, this is ideal)
    If its a standard DSO, the values maybe over-writing upon activation.
    You have 3 records (quantity = 1250 * 3) that have been receipted on 23.01.2010, where Posting Date = 23.01.2010.
    You also have a record (quantity = 1250 * 1) that has been receipted on 26.01.2010. Posting date = 26.01.2010.
    Now, in RSA3 & in PSA you can see more records than intended.
    This is because you have before & after images. (ROCANCEL = X or blank).
    ROCANCEL = X --> Before Image (record before change)
    ROCANCEL = blank --> After Image (record after change)
    This is a standard property of the extractor.
    Now, we also have something known as BWVORG (Process Keys). Each process, i.e. creating a PO, Goods Receipt, Invoice etc.. have different Process Keys.
    Creation - 001
    Goods Rcpt. - 002
    Invoice - 003
    We can see that record 8, i.e. BWVORG = 002 (GR) has been modified on 26.01.2010.
    That is why there is before image and after image.
    Which one should be the correct posting date? 23.01.2010?
    Normally in a Write optimized DSO, you will have all the records (before and after images & others as well).
    I hope this helps.
    Please let me know if otherwise.

  • Recording with guitar to computer through USB X-Fi

    I am having a problem trying to record with my guitar through my USB X-Fi 5.. I am using a program called Audacity to capture the recording. I have my guitar hooked up to a Line 6 POD 2.0 effects device that has a left/right output. Then I plugged the /8th male end running from that into the Line-In port on the USB X-Fi 5. and then to my computer via USB. But I cannot hear my guitar when playing and it will not capture the recording. I basically bought the USB X-Fi 5. because when recording with my guitar I thought that my laptops sound card was making the recording of low quality. So I got the USB X-Fi 5. to help that. Any help would be greatly appreciated!Message Edited by BulletFMV on 2-06-2008 03:42 PMMessage Edited by BulletFMV on 2-06-2008 03:43 PM

    That USB audio interface isn't any better for recording from onboard sound. You should have bought least the Creative E-MU 0202 USB (if you prefer Creative products/USB audio interfaces).
    With your current setup, instead of using Audacity, you could try, say, Cockos Reaper + Asio4All driver.
    - http://www.reaper.fm/
    - http://www.asio4all.com
    In any case, remember also read the software documentation as well ... all needed information for recording task is normally guided there in user manual(s).
    jutapa

  • Export Excel Data only causes blank line between 2 lines of records

    Hi,
    I wrote a complete winform application using CR2008.
    For information :
    C# Framework 3.5
    Windows XP SP2 or Windows Server 2003 SP1
    CR2008 SP1
    Application allow to preview report. In the preview window (CR activx) there is a "letter icon" to export report in several format.
    -RPT
    -PDF
    -DOC
    -XSL
    -XSL Data only
    When I export with "Excel Data only" format, I always have a blank line between 2 lines of records in Excel.
    Is there a way to supress them from VS2008 ?
    Thanks a lot for your reply,

    Hello, Jonik;
    Do you see the same blank lines when you export to Excel Data only in the Crystal Reports designer?
    Elaine

  • Product Request: Line-In Recording for Micro (or a USB Doo-D

    I think the Micro would really benefit from that level of functionality.
    There are two ways it might work, but I don't know the technical sides...
    : the headphone jack is not just a source or dread; it's also Remote-Ready. This may point to additional input uses for the hardware, if there is the firmware to exploit it.
    2: a line-in accessory could certainly be attached through the mini-USB jack. Again, the firmware would have to support it, but I would certainly pay for a doo-dad that let me record lectures and whatnot with an external microphone, not to mention the whole "record from a CD player" aspect, great for my numerous partially-scratched disks that my computer refuses to read...
    Plus, a USB doo-dad would trans-product - they could be used with all the other players that use the mini-USB jack to transfer data. Anyway, a feature like that is too good to only feature in the N200.

    I've just found a Yahoo! Group that discusses audio recording with Creative's Nomad Jukebox 3:
    http://grou
    ps.
    yahoo.com/group/njb3tapers
    So that's more proof that there's an interest in that. Maybe not as widespread, but I think one of the reasons the NJB3 was as successful was because of its recording capabilities, because as simple MP3 player it was too big, so it was the extra features such as line-in recording that made it stand up.

  • Recording with Quicktime and adding effect

    Hi all. I am recording Firewire video in Quicktime Player. The audio comes from a seperate source, through the line-in. To synchronize, I need to delay the audio by 600 ms. Does anyone have a method of doing so? I have an AU delay that would work. I just can't figure out how to apply it to the live lin-in.
    Thanks very much for any help.
    Jeremy

    I'll pass on some things I discovered, in case anyone has this question or anyone can add to this.
    I succeeded to some degree, by doing this:
    1. Installed Soundflower; this creates virtual sound inputs and outputs, so sound can be passed between applications.
    2. In GarageBand, I created a real instrument.
    3. Set input to Line-in
    4. Added the Voxengo Delay AU (http://www.voxengo.com/product/sounddelay) which is free and simple. The Apple AUDelay repeats the sound as well, rather than just delaying it (unless I missed something).
    5. Set GarageBand's sound output to Sountflower, and turned monitoring on.
    6. In QT player, new movie recording, with audio input set to "Soundflower".
    The good news is that I can save the GarageBand document, which can be opened and everything is immediately running. But, it would be nice if there was a way to add an effect to any input directly so that I only have to use one application.
    Any suggestions to streamline this? It is for an installation which will be run by students, so the fewer steps needed to set this up the better.

  • Line In Recording Level Adjustment

    I am recording from a tape recorder to the hard drive. I have done this a lot over the years. Suddenly I am no longer able to adjust the line in recording level. I have always before gone to Control Panel/Hardware and Sound/Sound (recording tab), Click Line In, then click on Levels. When I adjust the level, either lower or higher, it does nothing to change the sound level. Can aynone please tell me why this feature isn't working any longer on my computer. Could some other setting have gotten changed? Where should I look? Thanks!!!!

    Have you tried to discuss it with mixer manufacturer?
    I mean they know own product very well and have best experiences with it.
    I presume they have tested it on different hardware platforms and different operating systems so I believe they are the right address where you can ask for help.
    In control panel you have standard options for sound but maybe you need something specific for connected mixer.

Maybe you are looking for

  • I purchased v1 golf and it will not load on my 3g phone any solutions

    I purchased v1 golf and it will not load on my 3g phone any solutions

  • Dual Control for GL postings

    Hello My client, a bank, wants to activate Dual control for GL postings (so not only dual control for changing vendor or customer or bank or GL master data using sensitive fields in customizing). How can I realize this requirement? Regards Arjan Dual

  • CallableStatement Woes

    Hello all...hopefully someone out here can square me away. I recall being able to pass an array of Strings to a stored procedure via CallableStatement's setObject method (inherited) at one point in my career (just over a year ago). At the time, the s

  • OSX Server 3.0 cache data flush

    The cache server has been working great up to the point where registration failed which I accept, but upon the 3300 seconds re-register the log below shows it doesn't attempt the re-register. Fine these things happen but the biggest problem i have th

  • Responsiveness of forms - custom css

    Hi I notice the forms widths  are set to pixel based, which causes problems when embedding forms in responsive designs.  when a site is viewed on a smaller device the form breaks over the container that holds it. making the whole form very messy. The