Line-in transfer to line-out?

I have a high quality audio system connected to the line-out on my Mac Mini and would like to connect audio from a radio tuner to this system without disconnecting it from the Mac Mini line out. Is there a way to connect my tuner to the line-in on the Mac Mini and transfer the sound to the line-out. I am familiar with recording software (audacity, garage band) that allows me to record to the line in and then play it back through the line out. But is there software that will just let me pass a signal from the line-in to the line-out in real time?

Try linein - http://www.rogueamoeba.com/freebies/

Similar Messages

Spliting inbound delivery line into transfer order lines

Hi
I use WMS.
And I have faced a problem.
I have one line in inbound delivery and when transfer order is created from this delivery it contains also one line. But very often volume of material is more than one cell.
Is it possible to split one line in delivery into few line it tranfer order according to volume of cells and material ?
Andrey Garshin

Hi,
You have one more choice of doing this.
Before the creation of TO, during LT06 or LT04 transaction itself you can manually divide the line item quantity into different storage bins.
Hope it helps.
Aktar

Spare lines and transfer numbers

I have two queries, that I'm sure someone can help me with:
1. I rent out an adjacent property and in the past a telephone line has been installed. Previous tenants have used the line, and paid the bill, and the number discontinued when they moved out. The line still has a dialling tone, but no number. A new tenant moves in at the beginning of November for a six month shorthold tenancy. Presumably I can get a new number and a connection, but will BT give him/me a six month contract and at what price.
2. In my house, I have two lines. No 1 has my internet and Fax connection, No 2 just has a phone. Would it be possible to keep my No 2 number and transfer my internet and Fax numbers from No 1 onto No 2 ?
Thanks to anyone who can help.
Solved!
Go to Solution.

hi yes yes it would be possible to transfer your lines and services as you wish to do however it is a NO to six month contracts the minimum contract time is 12 months
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

Question about Audio line-in/optical in/Audio out/optical out

I have a late 2009 27" iMac (v3.06 GHz Intel Core 2 Duo). I note that on Apple's description of the rear ports, what I thought were simply headphone (Audio Out) and microphone (Audio In) jacks are described as:
1. Headphone/optical digital [S/PDIF] audio out:
"Line/Headphone output
"The headphone output is automatically selected for audio output if no external S/PDIF optical digital output device is detected. The headphone output supports a stereo data stream at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. The headphone output volume can be adjusted from 0.0 dB to -64 dB..."
"The headphone output is automatically selected for audio output if no external S/PDIF optical digital output device is detected. The headphone output supports a stereo data stream at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. The headphone output volume can be adjusted from 0.0 dB to -64 dB."
and
2. Audio line-in/optical in:
"Line input
"The analog line input operates independently from all other audio input ports and is always available. The line input supports recording at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. Audio recorded from the line input is presented as a stereo data stream. You can adjust the line input gain from -16 dB to +30 dB..."
"The digital audio input has the following electrical characteristics (nominal specifications), based on input of a 1 kHz sine wave at 0 dBFS input level, 24-bit sample depth, and 44.1 kHz sample rate (unless otherwise specified below):
FSI – input sample rates: 44.1 kHz, 48 kHz, or 96 kHz
Bits per sample: 16, 20, or 24
Signal-to-noise ratio (SNR): >130 dB
Total harmonic distortion + noise (THD+N): <-130 dB (0.0003%)
Sound output/digital audio output port"
While, as an Olde School audiophile guy (62, and I still have vinyl!), I generally understand the gist of all this, I'm not at all hip to what S/PDIF optical digital output and/or digital audio input can do for me. So my questions are:
1. Can somebody please wise me up to the usage(s) of these optical inputs and outputs on the iMac?
2. The Apple description says,under "Line/Headphone output":
"PCM: 16, 20, or 24 bits per sample at sample rates of 44.1 kHz, 48 kHz, or 96 kHz
AC-3: 16 bits per sample at sample rates of 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz"
and under "Line input
"The analog line input operates independently from all other audio input ports and is always available. The line input supports recording at bit depths of 16, 20, or 24 bits per sample and at sample rates of 44.1 kHz, 48 kHz, or 96 kHz. Audio recorded from the line input is presented as a stereo data stream. You can adjust the line input gain from -16 dB to +30 dB."
How -- where -- do I adjust these bit depth and sample rates?
Thanks for your help!
Bart

Thanks for the info. Turns out there's an even easier way to do it than using the "Audio Midi Setup": through the prefs in the latest (and probably some previous) version of VLC, which is currently Version 1.0.2 Goldeneye (Intel 64bit).
Now if we could only get full native resolution (or at least 1080p) HDMI input into the Mini-DPs of our 2560 x 1440-capable 27" iMacs and actually have it display something WAY better than 720p (half the resolution of which the 27" iMac is capable) to which Apple limited it, without having to buy a third-party $270.00 HDMI-to Mini-DPP converter and scaler. Call me crazy, but it seems kinda silly to have to pay another $300 to buy a device that will scale the 27" iMac's resolution back up to a measly 1080p, let alone its native 2560 x 1440. But, as the
As a side note, can anyone tell me -- perhaps the elusive and chimerical, but omniscient and omnipotent "communityhosts" of Apple.com -- why, in my original post in this thread, the phrase "1. Headphone/optical digital S/PDIF audio out" had the acronym "S/PDIF" stricken through, like it was a particularly egregious Anglo-Saxonism? Wikipedia defines the acronym thus: "S/PDIF is a data link layer protocol and a set of physical layer specifications for carrying digital audio signals between devices and components over either optical or electrical cable. The name stands for Sony/Philips Digital Interconnect Format."
If I have inadvertently broken another arcane, abstruse, and/or inscrutable canon of the rules (http://discussions.apple.com/help.jspa) governing what may or not be asked or said on these avowedly "user-driven" discussions, allow me to beg for forgiveness beforehand, pleading ignorance, and ask that Apple's "community hosts" or administrators would expand upon and make very clear, in their "Apple Discussions Terms of Use," a comprehensive list of terms, subjects, lines of discussion, references to certain items, products, people, policies, etc. that are simply disallowed in the forum.
It is extremely depressing and frustrating to spend however long it takes -- and it takes ME a long time, as I have a 60-year-ingrained tendency towards verbosity -- to ask and post a question or message, only to have the message never even posted to the forum, but, without any sort of consultation with me so that I may learn from, and correct, my errors, uncaringly consigned to the illimitable void by hands to whom there is no appeal or orison.
It seems unfair.

My adobe pro cc 2014 time line 82 minutes keep going out of sync ?

My adobe pro cc 2014 time line 82 minutes keep going out of sync?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool, a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

Thank you - Just what I needed

Unable to find line break between two lines in attachment file.

Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF;     -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;

Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file.

CREATE SUBSTITUTION RULE FOR u0093COPYING LINE ITEM TEXT FOR LINE ITEMSu0094

Hi every body
When user post transactions in FB60 we have give the line item text, Suppose no.of lineitems are there in tht instnace my client asked to create the substitution rule to COPYING LINE ITEM TEXT FOR LINE ITEMS
pls tell me the processes how to create the substitution rule
Plz can anyboby help me out...
laxmi velaga

sorry,
link doesn't work:
here's the content:
you must add your rules at event 3 (complete document)
in an exit of ZGGBS000:
data htext type bseg-sgtxt.
*find
LOOP AT BOOL_DATA-BSEG INTO BSEG
WHERE bseg-sgtxt <> space.
move bseg-sgtxt to htext.
ENDLOOP.
*copy
LOOP AT BOOL_DATA-BSEG INTO BSEG
WHERE bseg-sgtxt = space.
move htext to bseg-sgtxt
*modify
MODIFY BOOL_DATA-BSEG FROM BSEG.^
ENDLOOP.
http://help.sap.com/saphelp_47x200/helpdata/en/5b/d231a843c611d182b30000e829fbfe/frameset.htm
please reward useful answers
thanks and regards
Andreas

Create multiple line item from one line item in BizTalk mapping

Hi,
In one of our new requirement we need to create 3 line items for every line item we are receiving with same value but in the below format.
Sample Input:
<EmpId>1234</EmpId><Name>ABCD></Name><Dept>YYY</Dept><Year>2014</Year><Desc1>D1</Desc1><Desc2>D2</Desc2><Desc3>D3</Desc3><Valid>Yes</Valid>
Sample Output in Flatfile:
1234,ABCD,,,D1,Yes
1234,ABCD,YYY,,D2,Yes
1234,ABCD,YYY,2014,D3,Yes
Can you Pls help me in creating the mapping in above format.
Thanks in advance,
Regards,
Elango
Chennai.
Mark As Answer or Vote As Helpful if My Reply Does.

Elango,
Before I explain about the solution, make sure when you give inputs/requirement in forums for us to help you, pay attention.
The input instance you have shown
Doesn’t have a root element
Has a typo - <Name>ABCD></Name> -Element has invalid “>” character.
This makes us to spend more time in cleansing your input and then find out solution.
We are here to help you, so help us to help you better.
Anyway, coming to the solution
You have to create map with a structure similar to the below shown image:
Here destination schema is a flat file schema with comma-delimited fields.
If you look into the destination schema, it look similar to your input schema, but there is just one “Desc” field instead of “Desc1”, “Desc2”, “Desc3” in your source schema. In destination, the
record has to repeat with same values for rest of the fields. And for “Desc” in destination schema will have corresponding index value of “Desc1” or “Desc2” or “Desc3” from source. i.e. first node of destination will have value of “Desc1” from source to “Desc”
field in destination, second node of destination will have value of “Desc2” from source to “Desc” field in destination and third node of destination will have value of “Desc3” from source to “Desc” field in destination.
I use XSLT in the map, with recursive template which will repeat for 3 times. I have given comment in the XSLT for your benefit.
<?xml version="1.0" encoding="UTF-16"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" xmlns:var="http://schemas.microsoft.com/BizTalk/2003/var" exclude-result-prefixes="msxsl var" version="1.0">
<xsl:output omit-xml-declaration="yes" method="xml" version="1.0" />
<xsl:template match="/">
<xsl:apply-templates select="/Root" />
</xsl:template>
<xsl:template match="/Root">
<Record>

<xsl:call-template name="LintItemTemp">
<xsl:with-param name="i">1</xsl:with-param>
<xsl:with-param name="count">3</xsl:with-param>
</xsl:call-template>
</Record>
</xsl:template>
<xsl:template name="LintItemTemp">
<xsl:param name="i" />
<xsl:param name="count" />
<Details>
<EmpId>
<xsl:value-of select="EmpId/text()" />
</EmpId>
<Name>
<xsl:value-of select="Name/text()" />
</Name>
<Dept>
<xsl:value-of select="Dept/text()" />
</Dept>
<Year>
<xsl:value-of select="Year/text()" />
</Year>

<xsl:if test ="($i =1)">
<Desc>
<xsl:value-of select="Desc1/text()" />
</Desc>
</xsl:if>

<xsl:if test ="($i =2)">
<Desc>
<xsl:value-of select="Desc2/text()" />
</Desc>
</xsl:if>

<xsl:if test ="($i =3)">
<Desc>
<xsl:value-of select="Desc3/text()" />
</Desc>
</xsl:if>
<Valid>
<xsl:value-of select="Valid/text()" />
</Valid>
<xsl:value-of select="./text()" />
</Details>

<xsl:if test="$i < $count">
<xsl:call-template name="LintItemTemp">
<xsl:with-param name="i">
<xsl:value-of select="$i + 1"/>
</xsl:with-param>
<xsl:with-param name="count">
<xsl:value-of select="$count"/>
</xsl:with-param>
</xsl:call-template>
</xsl:if>
</xsl:template>
</xsl:stylesheet>
So the input and output will look like the below:
You can change the schema/XSLT and its corresponding namespaces as you want.
When the above shown output is send to a custom-pipeline with flat file assembler in send port will output the above shown output to the flat-file structure as you wanted. Again, I repeat you
to use flat-file file schema with comma-delimited fields as the destination schema in the above shown map for you to get the flat-file output as you needed.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

In file adapater how to divide the o/p to come on 2 lines from a single lin

Hi ,
Currently my o/p is coming like
2006/03/17,9:32:10,U123577,000000000000100338,24043350,X,Y,S,06,017,UL Int. PO-FGDR U created under the number U123577
i would like to break my output as
2006/03/17,9:32:10,U123577,000000000000100338,24043350,X,
Y,S,06,017,UL Int. PO-FGDR U created under the number U123577
which means i would like my o/p to come on 2 lines
how do i make this happen

But how do i now were i have to give nl .
the out put is just one string .
structure of my file is like this
DT_File_Output
Output
       Data
           Date
           a
           b
           c
i want date and a to come on one line
and b and c to come on a diff line
ie i want my o/p to be like
date a
b c
date a
b c
date a
b c
is there a way can i specify a line to come after the out put

Making my 2nd BT line the main phone line

Hi
I've been trying to find a solution for this with no luck. Spoken to several BT engineers (all based abroad!) and no one seems to understand the issue, let alone help. A pointer in the right direction would be hugely appreciated!
We have 2 lines coming into the flat - Let's call them Line 1 and Line 2. Line 1 is the main line around the house. If you plug any basic phone into a socket in any room, you get Line 1.
We have a Panasonic PBX system with both Line 1 and Line 2 going into it. Plug in a programmed Panasonic phone into any socket, and you get both line 1 and 2 available from the phone's selection menu.
We are dropping Line 1 and want to make Line 2 the main line in the house (Line 1 is hardly used anymore). We want to be able to plug a basic phone into any socket and get Line 2 by default. We also want to remove the PBX, although this is less of a priority. Main thing is to make Line 2 the default standard house line, and change our phones to basic standard phones.
I must be asking the wrong questions as I can’t find anyone than can help. Is this something BT can do? Is it the company that set up the PBX system (Spitfire I believe)?. Is it something I can do (I’m not hugely technical, but can follow basic steps)? What do I need to ask for, and to whom?
We do have a Cable & Wireless box near the PBX with two ethernet style cables coming out of them. They are labelled with the actual phone numbers of Line 1 and Line 2. I tried swapping those round, but it made no difference. Line 1 was still the main line. I suspect this is something compeltely unelated.
Thanks in advance for any help.
Cheers

This was originally sold as a business system, was there once a business operating from the premises?
I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Convert Family Plan Line to data only line for iPad

I currently have 4 lines on verizons old family share plan. 3 are Iphones. 2 of them have unlimited data, 1 with 2GBs a month, and the other line is a basic phone that doesn't get used much and does not have a data plan attached. I dont want to touch the 2 with unlimited data or the one with 2GB of data. The 4th line is a basic line and has a contract till Feb 2014. My bill avg 250.00 with the 4 lines, 2000 min, unlimited text and the data plans that are on it now. All together, we avg about 12 GB a month and durring the summer, it has gone as high as 20GB Our family uses Pandora, SlingBox apps, and Netflix, quite abit and although we have Internet and WiFi at home, and use WiFi when ever possible, living in a small town, free hotspots are hard to come by.
I have a Verizon Ipad 3 with LTE that its deactivated due to low use outside a WiFi network but for convenice sake, I might reactivate it. But to finish out the 4th line (basic phone line) contract, can swap that 4th voice line to the iPad 3 with LTE, finish out the 4th line contract? I know I would have no problem adding data to the 4th line, getting a 4g sim so i would be looking at 9.99 + 30.00 for 2gbs for a total of 40.00 for that line.
What I was hoping for was to just get a data only plan on the iPad and not pay a ETF on the 4th line since that line would still be active, just only on a data only plan. I do understand that tablets only have tiered data plans availble to them.

As long as the line remains in service during the life of the contract, you can pretty much do whatever you want with it.

Single ink line =single uniform traced line in Live Trace? Nope.

I'm using AI CS5 and I'm trying unsuccessfully to get a Technical Drawing result with ONE single traced uniform-thickness line from a single scanned drawn line in a Photoshop file. I am trying to NOT get a calligraphic line that runs thin-blob-thicker-blob-thin again, then becomes two parallel hairlines, then goes back to thick-thin. It may look hand-drawn and artsy; that's fine, but it isn't what I'm hoping for. I want a single standardized 1pt path with no double (supposedly outlined) sections. That's all I can get using the furshlugginer "Technical drawing" setting. Is that normal? If so, boy, have I got a feature request for Adobe! I realize that there will be occasional corners and feet that will become traced blobs that I will need to lop off, and I can handle that, but how do I draw a single line, scan it, then, in Live trace, achieve a single uniform line, like most of the actual, real, technical drawings I have seen? Or do I have a problematic copy of CS5?

Thanks, Steve. After my frustrtion and outrage subsided I checked out a dimly-related forum topic and found it very helpful: "uniform lines in a vector image". Your point was well made, plus two more: Set the Max line width wide enough so that no blob or corner exceeds it, e.g., 30pt is around a quarter of an inch; if I set the line width max at 30 pts I'm likely to wind up with a clean, uniform 30pt line without blobs, from which I can simply assign a thinner weight, such as 1 pt. The other tip is to blur the original raster line slightly, so as to suggest a centerline, blurred at its edges; Live Trace will zero in on the phony "centerline". Is there a "use centerline" setting in Live trace? I seem to remember that there was one in Autotrace and in Streamline, but I'm unable to find one in Live Trace. Frankly, the value of the "options" presented in the Live Trace pallet isn't particularly obvious. I looked through the Illustrator Classroom in a Book, and was told to "experiment with all the options", but not how to get any particular result. In the end, the settings can be used to get the results I was looking for, but I had to do some serious digging, without much help from the documentation. I would think that getting one traced vector line from one raster line would be a natural place to start. Guess not.

Reading a text file line by line and splitting each line into an array

I have a text file that I want to read in line by line and within each line, I want to do some processing. I have a file like the following:
apples||oranges||bananas||grapes
cars||trucks||planes||boats
And I want to end up with an array such that
First...
item(0) = apples
item(1) = oranges
item(2) = bananas
item(3) = grapes
Then move onto the next line with item getting cleared each time. Can anyone offer any ideas on how do to this? I am unclear on reading line by line and then also splitting into an array as I am new to this.
Thanks.

For reading a text file in line by line, you want to use a FileReader (java.io.FileReader)
If you wrap it in a Buffered reader, you can call readLine() and get the file one line at a time.
File file = new File("C:\myFile.txt");
BufferedReader in = new BufferedReader(new FileReader(file));
String s = in.readLine();
while (s != null){
// string handling here
s = in.readLine();
}For the second part, you probably want to look at the method String.split() which should split your string up into an array for you. Check out the API for java.lang.String
Check out the

Line-in transfer to line-out?

Similar Messages

Maybe you are looking for