Line item and Cardinality (DB2)
I have 2 issues with a cube.
Issue 1:
I read everywhere in this forum that if Line Item is marked for a dimension that there will be no index/sid table for this dimension. In stead the sid table of the InfoObject would be used.
I have however an example of a cube with a line-item-dimension that HAS an index table. The table has two columns and both columns have exactly the same data. The number of records is the same as for the SID table of the single InfoObject contained in the dimension. The system runs with a DB2 database.
Can someone explain this?
Issue 2:
In my case, the InfoObject has 27.000.000 distinct values (document number). In the cube I have 12.000.000 records, each with its own unique document number (so about 50% of the document numbers occur in my cube). The line-item is ON, but the high cardinality is OFF.
Is there a guesstimate on how much performance I would gain if I would set High Cardinality on?
Does this setting influence to load-performance?
The table that appears for the line-item dimension is normally a view, it is named as a dimension table for whatever reason. Do check (maybe in SE11) whether it is indeed a table, or a view on the master data table.
I do not understand it fully, however if the line-item dimension is 'on', I don't think it should make any difference whether the 'high cardinality' is checked or not.
Similar Messages
-
FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT
Dear Expert
FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENTHi,
It seems from the screen shot you are seeing different documents as in the first screen shot it clearly shows you have booked the multiple expenses under one see the below screen shot we have circled it
whereas FB03 screen shows different.
You can do one thing click on circle item and check the expenses involved in it and accordingly go to FBL3N and display documents for that G/L for the date 05.04.2014.
Hope your issue has been resolved else revert.
Regards,
Tejas. -
Missing Line Items and '?' Symbols in some Reports
I have upgraded the patch level of my production server and patch level
list is given below
SAP_BASIS 640 0022 SAPKB64022
SAP_ABA 640 0022 SAPKA64022
ST-PI 003C_640 0001 SAPKITLPS1
PI_BASIS 2006_1_6400006 SAPKIPYL06
SAP_BW 350 0021 SAPKW35021
SAP_HR 500 0017 SAPKE50017
SAP_APPL 500 0019 SAPKH50019
PI 2004_1_5000004 SAPKIPZI64
problem is that whenever I run SAP FICO standard reports FL3N, FBL5N,
KB01, F.08 etc it generates the report correctly but when i am taking
print out of these reports it misses some line items and total value as
well screen shots are attached for information.
my second problem is that there are some garbage entries with
symbol '?' in SAP Menu and toolbars of some Reports. Screen shot is
also attached for your information.
i am facing lots of problem in executing my daily operations due to
these errors.
regards,
Majid KhanDear Subramanian,
I am facing the same problem in Development and Quality Assurance Server
Regards,
Majid Khan -
Current;y have to expand each major line item and check all the minor line items, I just want a list of SNs associated with the contract. Any way to get this mailed to me every month?
Hi
I am sorry to see you are having problems
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Error while editing PO - deleting service line item and creating material line item.
In SAP SRM Extended classic scenario, PO is in 'ordered' status and contains a service line item. While editing this PO, I delete the service line item and create a new material line item. This gives me the following error.
Back end error: Enter G/L account
Back end error: LIne item still contains faulty items.
This happens only with service- material comibination and no other combination(material-service, service-service, material-material).
I need to know the reason for this issue and how it can be solved?PO Values (Inc Tax):
Item 1: INR 228 L
Item 2: INR 27.83 L (Payment also done in 2008)
GR for Item 1: INR 207.46 L
Remaining Comm = INR 21.01 L
Item 1 having 73 sub line items.... fo some of the sub-line items GR for some qty already done in last fiscals.
User changing for remaining qty.
Budget Report values:
Previous Years: Budget, Actual & Assigned = 304.85 L
Available = 0 (Carry Forward done for Budget & Commitments)
2011: Budget = 75.15 L
Actual = 53.86 L
Comm = 21.01 L (Same as Remaining Commitment)
Avai = 0.28 L
Hope this will help. -
STO or PO for multiple line items and multiple destinations
I am working in retail enviornment and I have folloowing two questions:
1- we need to push articles( materials) to approx 1400store- we need to create STO with approx 10 line items and send materails to 1400 stores- this happens several times a year.
what is the easiest way to create this document without having to create either 1400 documents or create one document for all stores and enter 14000 lines? (Sames items/ and qty going to all stores)
2- We also have to send approx 600 items to one or two stores at a time ( when a new store is opened)- these items are same.
Is there a way to create this STO/ PO and keep reusing this document again and again withoiut entering 600 line items everytime this requirement comes up ( this requirements comes up anywhere from 10 times per year to 50 times/yr
Does anyone have any idea on how to simplyfy this process. Any help/ idea would be of great help.
Thanks
RajA PO once entered can be copied in ME21N, by drag-n-drop into the shopping cart. The problem might be changing delivery dates and delivery plants.
Another option is to use BOMs. -
In a archived saler Order user had deleted Line Item and completed overall sales order. Now this sales order is archived, but it is stll appearing in BW report as open order because of deleted item with rejection Status is maintained as “A” (Not yet Processed).
We want to change this status from "A" (Not yet Processed) to "C" as completed.
I have tried to reload Archive data but due to some limitation I was not able to do it. Also I feel this will like this s not the proper way to do it.
Could you please help me to correct way to do it???
Thanks in advance....Hi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ -
Relation between Invoice Line items and Accounting Line item
Dear All,
My requirement is to print all the invoice documents and it's tax values like cenvat, Ecess, BED and VAT.
I have to fetch these tax details from BSEG table .
I' am getting Invoice number ( RBKP-BELNR ) from BKPF-AWTKEY .
Can any one please tell me how to relate the Invoice line items and Accounting document line items..
Any BAPI or FM is there to retrieve these data.
Please do needful in this regard.Hi,
from table bseg - field Koart
K = Vendor
D = Customer
S = G/L account here tax lines identify with buzid = T
or take table bset for taxes
Andreas -
To get line item and confirmation details from CRM_ORDER_READ
Hi,
Please can anybody let me know which the field from which i can get line item details and material for the service order given?
I am using CRM_ORDER_READ to retrieve the values. In that i am exporting 4 fields - et_orderadm_h, et_orderadm_i, et_product_i, et_doc_flow. So from where to get line items and material id from these fields?
I will be very thankful if i get the answer of this question.Hi,
The attribute NUMBER_INT of ET_ORDERADM_I contains the Item Number.
Hope this helps!
Regards,
Rohit -
Table to link FI document number, line item and pricing condition type
Hi,
I am looking for tables to link the FI document number, line item and PO pricing condition type.
Appreciate any help on this.
Thanks.For any PO in ME23n in which Goods receipt has happened, you can check in the itemdetails->Po history tab in ME23n.
Here you will find the material document number. Just click on the material document, it will take you to anpther screen here you will find a button for FI document.
Click that button for FI document. In PO history istelf you can see the Condition types.
Hope this helps. -
Line Item and Transaction Figures
Hi experts,
What is the difference between line items and transaction figures ?
I have gone through a document which specifies for Line items GL AR AP, it picks data respectively frm tables BSEG/BKPF, BSAD/BSID, BSAK/BSIK and for transaction figures GLT0/GLFUNCT, KNC1/KNC3, LFC1/LFC3.
What data 0FI_XX_6 fetches into BI when compared with 0FI_XX_4 ?
Please clarify.
Regards,
Bhadri M.Hi,
What are Transaction Figures :
Transaction figures are the sums of line items on the debit or credit side. The balance is the
difference between the debit and the credit transaction figure.
What is line items :
Line items are document items that were posted to a specific account. In contrast to a document item a line item only contains the information from the document that is relevant from the account view.
You can display the following line items:
Open items Cleared items Noted items Parked items Items with special G/L transactions (in Accounts Receivable and Accounts Payable)
Items with customer or vendor items (in Accounts Receivable and Accounts Payable)
You can display the line items for the following account types:
Customer accounts
Vendor accounts
G/L accounts
Point No 1:
0FI_XX_6 : Transaction Figures:
http://help.sap.com/saphelp_nw04/helpdata/en/41/4b73415fb9157de10000000a155106/content.htm
0FI_XX_4: Line-Item
http://help.sap.com/saphelp_bw33/helpdata/en/af/16533bbb15b762e10000000a114084/content.htm
Regards
Ram.
Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 10:46 AM -
Line item and summary settlement in AUC
Hi
What is the difference between line item and summary settlement with reagrds to AUC,In what cases they are going to be used ,can any one provide me some examples.
Thanks
LilyHi,
In WBS, there would be n number of line items in the Investment Projects.
So while doing settlement for those, we can decide whether to do on WBS based or Line items based.
These settings will be done by CO people.
Regards,
Maheswaran. -
Delivery block on the line item and on schedule line
why are there two delivery block on the line item and on schedule line respectively in the sales order? which one is exactly used for blocking delivery order from creating ? thank you very much!
Hi
The reason being, each line item can have more than one schedule line. If the line item has only one schedule line, the block at item level or SchLine level gives the same result. If the line item has two schedule lines, and if you want to block only specific delivery(one among the two schedule lines) the block at item level blocks both the deliveries and if you use delivery block at schedule line level, you can block only the required scheduled delivery.
Thanks,
Ravi -
Line item and header records in the same infopackage
Gurus,
I wanted to check how can I make sure that I get all the line item documents in the same package with the header document record in the same infopackage? Is there some setting for that? If I am writing a custom extractore how can I make sure of this in ABAP?
Thanks
AKDear AKBW,
This is not very clear why you want to use same infopackage for line-item as well as header data. Normally there are 2 different datasources for line item and for header data.
Say you are woking with Sales Order Data in ECC.
So Line-item datasource for sales order data - 2LIS_11_VAITM
and Header datasource for sales order data - 2LIS_11_VAHDR.
Now as they are 2 different datasource, so you must need 2 different infopackages.
Now if you have created one custom datasource in ECC, then just check if its extracting line-item level or header level data. Normally when we create any custom datasource, we try to make it line-item level, to have all the itemwise detail. Though its not mandatory.
So if you have 2 different datasources (SAP or Custom), you definitely need 2 different infopackages.
Please let me know, if you still have any more doubt. You can also give me the other detail of the custom datsource you are creating.( type, fields, what it is supposed to extract etc).. -
Buyer change the PO line items and end up with Awaiting Approval status.
Can you please help to look into this issue.
1.Buyer change the PO line items and end up with Awaiting Approval status.
2. But user claim that she got enough limit and should not route to her manager's approval. Also check with her manager and this PO do not exist his queue.
Any clue or tips on how to investigate on this issue. All your tips are appreciated,
-RickYou cannot change these POs because their changed version has status
'Deleted'. My proposal to fix them will be the following:
You will have to set changed version as closed(DOC_CLOSED set to X)
and in active version set DOC_CLOSED to space.
__-For the above statement, Can you guys please let me know, which table DOC_CLOSED belongs to and what are the steps to do this, as i come from a functional back ground.__
Maybe you are looking for
-
Can No Longer Install WinXP on My Machine
Opened my rig this afternoon and it went into continuous loop reboot. Safe mode was inaccessible and reinstallation of XP Pro was impossible. Called Microsoft and they have no actual fix for the problem. The problem seems to have something to do w
-
Custom program to save partners.. not saving Partners.
Saving Partners. Hi Guys, I am working on Solution Manager - and I am trying to save Business Partners in Solution Manager. I am using the function module - CRM_ORDER_MAINTAIN and then CRM_ORDER_SAVE to confirm the changes. This gives no errors - but
-
Problem in communication channel
Hi I am new to xi and doing file to file scenario. In Receiver communication channel i am using file content conversion for text file. In adaptor monitering it is showing the error Initialization error: Conversion initialization failed with java.lang
-
Simple question: How do I change the color of lifetype font to anything but black/white??? This isn't animation color, just simple text. I see the ability to change the color for everything like shadow and outline, but not the text itself. where is t
-
My call to open an Oracle Web Form - Browser dependant???
I call the following URL (HTM file) from Internet Explorer on my Windows XP machine. http://9.35.32.205:7777/forms/html/ttmsMenu.htmThis HTM file then automatically logs me in using my PC's environment variables named ORAUSER and ORAPASS. <html> <bod