Line item concept and doc_item ???

Hi everyone,
Can anybody explain what is Line item?
I have created one application form of form class IS_U_BI_BILL
I want to get old meter number, new meter number, opening readning, closing reading, multiplier, kwh
and charges for different  line types given to me..
I know that those are around doc_item node. I am writing code in After exit of doc_item.
Can anybody explain me how should i do this.
Thanks in advance..

Hi,
Unfortunately I am not form developer, but I am billing consultant. I will try to explain why do we need line item types (BELZART).  Line item types we use to identify lines in the billing document for printing or for other purposes (IDE, Z-programms). All billing document lines and information are stored in the structure ERCHZ. For the better identification of the lines are used "line item types" which you can create in the customizing. There are also some standard line item types as IQUANT - for the technical information, IDEMAND - information about demand, or the lines as 00001 - billing of the energy etc. By programming of the forms you should firstly find your BELZART and after that to find your field for example quantity is in the field I_ABRMENGE, and also you can find there information - device number, meter reading results etc.
I hope this information will help you.
spydy

Similar Messages

  • Line item dimensions and cardinality?

    hi all,
    how to identify nor use the cardinality relationship as well as the line item dimension?
    can anyone explain me about it. since i am trying to create an multi provider which enables to fetch data from 3 ods.
    regds
    Hari Chintu

    Hi,
    Below is some useful information on Line item dimension and high cardinality.
    These concepts hold good for Cube design only, coming to ODS, these dont help you. As ODS is nothin but a flat structure, we do not have the facility of Star schema. Reporting on ODS can lead to performance issues, it is better to load data from ODS into Cube and then have a multiprovider on them instead of having it on ODS.
    Hope this helps.
    Regards,
    Kalyan
    Use
    When compared to a fact table, dimensions ideally have a small cardinality.  However, there is an exception to this rule. For example, there are InfoCubes in which a characteristic document is used, in which case almost every entry in the fact table is assigned to a different document. This means that the dimension (or the associated dimension table) has almost as many entries as the fact table itself. We refer here to a degenerated dimension. In BW 2.0, this was also known as a line item dimension, in which case the characteristic responsible for the high cardinality was seen as a line item. Generally, relational and multi-dimensional database systems have problems to efficiently process such dimensions. You can use the indicators line item and high cardinality to execute the following optimizations:
           1.      Line item: This means the dimension contains precisely one characteristic. This means that the system does not create a dimension table. Instead, the SID table of the characteristic takes on the role of dimension table. Removing the dimension table has the following advantages:
            When loading transaction data, no IDs are generated for the entries in the dimension table.  This number range operation can compromise performance precisely in the case where a degenerated dimension is involved. 
            A table- having a very large cardinality- is removed from the star schema.  As a result, the SQL-based queries are simpler. In many cases, the database optimizer can choose better execution plans.
    Nevertheless, it also has a disadvantage: A dimension marked as a line item cannot subsequently include additional characteristics. This is only possible with normal dimensions.
           2.      High cardinality: This means that the dimension is to have a large number of instances (that is, a high cardinality). This information is used to carry out optimizations on a physical level in depending on the database platform. Different index types are used than is normally the case. A general rule is that a dimension has a high cardinality when the number of dimension entries is at least 20% of the fact table entries. If you are unsure, do not select a dimension having high cardinality.
    Note: In SAP BW 3.0, the term line item dimension from SAP BW 2.0 must a) have precisely one characteristic and b) this characteristic must have a high cardinality. Before, the term line item dimension was often only associated with a). Hence the inclusion of this property in the above.  Be aware that a line item dimension has a different meaning now than in SAP BW2.0.
    However, we recommend that you use ODS objects, where possible, instead of InfoCubes for line items. See Creating ODS Objects.
    Activities
    When creating dimensions in the InfoCube maintenance, flag the relevant dimension as a Line Item/ having High Cardinality.

  • Customer/Vendor A/C with line item details and with opening and closing Bal

    Dear Sir / Madam,
    Is it possible to have a customer and / or vendor Sub-Ledger account-
    with line item details and with opening and closing balance detail
    for a particular period.?
    Regards
    Chirag Shah
    I thank for the given below thread which has solved the same problem for G/L Account
    Re: Report to get the ledger printout with opening balances

    Hello Srinujalleda,
    Thanks for your precious time.
    I tried the referred T-Code
    But this report is not showing Opening balance, closing balance detail.
    It only gives transactions during the specified posting period and total of it.
    Please guide me further in case if I need to give proper input at selection screen or elsewhere.
    Client Requires Report in a fashion
    Opening Balance as on Date
    + / -  Transactions during the period
    = Closing Balance as on date
    As that of appearing for G/L Account by S_ALR_87012311
    Thanks once again & Regards
    Chirag Shah

  • What is line item dimension and cardinality in BI 7.0

    Can u plz suggest me what is line item dimension and cardinality in BI 7.0..
    Thanks in advance.
    Venkat

    Hi Babu
    Line item: This means the dimension contains precisely one characteristic. This means that the system does not create a dimension table. Instead, the SID table of the characteristic takes on the role of dimension table. Removing the dimension table has the following advantages:
    ¡        When loading transaction data, no IDs are generated for the entries in the dimension table. This number range operation can compromise performance precisely in the case where a degenerated dimension is involved.
    ¡        A table- having a very large cardinality- is removed from the star schema. As a result, the SQL-based queries are simpler. In many cases, the database optimizer can choose better execution plans.
    Nevertheless, it also has a disadvantage: A dimension marked as a line item cannot subsequently include additional characteristics. This is only possible with normal dimensions.
    Note: In SAP BW 3.0, the term line item dimension from SAP BW 2.0 must a) have precisely one characteristic and b) this characteristic must have a high cardinality. Before, the term line item dimension was often only associated with a). Hence the inclusion of this property in the above. Be aware that a line item dimension has a different meaning now than in SAP BW2.0.
    SAP recommends that you use ODS objects, where possible, instead of InfoCubes for line items.
    Hope this helps.
    Plz check these links:
    SAP Help:
    http://help.sap.com/saphelp_nw04s/helpdata/en/a7/d50f395fc8cb7fe10000000a11402f/frameset.htm
    Thanks & Regards
    Reward if helped
    Edited by: Noor Ahmed khan on Aug 5, 2008 2:36 PM

  • Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers in fbcj

    Hi all ,
    I have a requirement to Post Cash Journal Document using FBCJ tcode.
    Is it possible multiple line items debit & single line item credit and different cost centers and different profit centers
    for exp:
    pk   GL a/c   description       amount   cost center  profit center
    40  400101  telephone exp   500        1403            P 1000
    40  400101  telephone exp    100       1404            P 2000
    50  200100  cash in hand      600-                             
       This is My requirement  is it possible in fbcj
        Please suggest me.ASAP.
    Regards
       Naresh.

    Hi,
      This you can do it in two ways:
    1. Make three header under top level....one Product A, 2nd Product B ( as Billing element) and third as Common expense ( only cost). Now 1st & 2 nd WBS, you have to have sales order linking with individual lint item, for third you will accumulate all the common expense till the period end then make a reposting of the same in desired proportion to both products WBS hierarchy
    (This is if you want to have a track on the common expense as well.......like planning, budgeting & control)
    After this reposting, run RA for individual billing element and hence you will all the complement detailing and control over Revenue and expense with respect to Product A and Product B individually.
    2. If you don't want to maintain that kind of detailing the common expense and keep track of it through project, then have cost centers accordingly and make an assesment/ distribution with respect to expenses accumulated at those cost centers for the period to the respective WBS under each product. Then execute the period end processes for the project.
    Or
    You can try with have two more line items in the costing sheet as an overhead against common expenses with respect each product.
    I hope this should help you.
    Regards
    Avisek Bhardwaj

  • T.code required for Vendor line item display and Customer line item display

    Hi Gurus,
    Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
    Kindly advise.
    Regards,
    Samar

    Hi,
    You could use these, for example:
    S_ALR_87012103 - List of Vendor Line Items
    S_ALR_87012197 - List of Customer Line Items
    Just curious: what's wrong with FBL1(5)N?
    Regards,
    Eli

  • Line item number and ledger item number posted differently

    Hi Friends ,
      I have a BAPI for posting the documents in SAP from another system.This BAPI is using the standard BAPI -  'BAPI_ACC_DOCUMENT_POST' to post the documents.But when I post the document using this BAPI the line item number and ledger item number in the document are posted differently. ie . for line item no 1 ledger item is 24 .But when I am posting it directly it is same ie for line item no 1 ledger item no is also 1.Lot of other programs in our R/3 system is dependent in this logic.What could be the parameters in BAPI that could affect line item and ledager item ? Can anybody help me in finding out the reason for this ?
    Thanks in advance ,
    Joby

    Hi ,
    Anybody can help me on this issue ?
    Thanks in advance ,
    Joby

  • Text element with line item content and include text

    Hi All,
    How to write in smartform in single text element with line item content and include text.I am using this text element in table . Pls help me out. i am writing the include command in text element ,but this command is not enough for single line of text editor.
    thanks ,
    Rakesh singh

    I have been pulling my hair out for a few days trying to find
    this solution. This fixed my problems as well.
    I was getting ready to scrap the Report Builder altogether
    and move to SQL Server Reporting Services over this issue.
    I'm running 7.0.2 also, that version alone fixed many small
    issues like creating borders and such.
    Thanks

  • Diffence in line item display and Balance display

    Hi Gurus,
    Please let me know why there is difference in line item display and balance display in one of GL account in previous year for 1 posting period.what can be cause for this, If I go at FS10n and check the balance for specific period it shows different balance and if I double click on same period and I can see the different Balance for same GL.
    Thanks
    Edited by: Manu Rathore on Feb 8, 2012 3:06 AM
    Edited by: Manu Rathore on Feb 8, 2012 3:15 AM

    Hi,
    this is FS10N - Balance display-GL X
    Period                    Dr                  Cr                 Balance
    12/2011                  33,229.00       49,395.00     16,166.00-Cr
      Type     Doc. Date  Amount in local cur. DocumentNo
      KG       31.12.2011              400.00  65762562
      KG       31.12.2011              200.00  65762563
      KA       28.12.2011              900.00  68250089
      KA       28.12.2011            1,000.00  68250090
    Line item Display Account             X 
    company Code            0000
      Type     Doc. Date  Amount in local cur. DocumentNo
      KZ       22.12.2011              500.00  69461532
      KA       22.12.2011              200.00  68250072
      KZ       22.12.2011              200.00  69461534
      RE       28.12.2011            4,445.00  60000201
      RE       28.12.2011            1,445.00  60000202
      KA       28.12.2011              250.00  68250084
      KA       28.12.2011            1,500.00  68250085
      KA       15.12.2011            2,000.00  68250077
      KZ       29.12.2011            6,555.00  69461633
      KZ       29.12.2011            7,868.00  69461633
      RG       30.12.2011            5,566.00  64000464
    Account x           33,029.00     
    See the difference in Dr side at FS10N it= 33229
    and line item total =33029
    Difference of 200.
    Same there is difference in credit side.
    Hope you understand it.
    Thanks

  • Line Item Dimension and Navigational attribute

    Hi Gurus,
    Can somebody tell me how line item Dimensions and navigational attributes works technically?
    What are the pros and cons for them?
    Regards
    Alex

    Hi Alex,
                You will use navigational attributes based on how you want to track and report history. Let me explain with an example.
    Customer Bubba is assigned Sales Group XYZ in Jan 2007. In July the Sales Group on the Customer Master record is changed to  ABC. Your are looking at the sales report.
    1). If you want to see all the sales made to Customer Bubba at the time of reporting (current) then you will use navigational attributes You will create 0SALESGRP as the navigational attribute of 0CUSTOMER .  Then all sales to the customer will show up under Sales Group ABC.
    2). If you want to see  all the sales made to the customer at the time the actual transaction occured then you will add Sales Group as a characteristic of the InfoCube. Then sales from Jan - June 2007 will show under Sales Group XYZ and from July - Present will show under Sales Group ABC.
    Performance issue occurs because navigational attribute is stored outside of the dimension table of the cube and is stored in separate master data tables. So query has to perform additional table read. So essentially there are advantages and disadvantages of usng navigational attributes. It is business requirement that will drive the use of navigational attribute.
    Hope this helps!!!. Please assign points.

  • Line item extract and delete query

    If you change the default view for a scenario and line-item detail has been entered,
    you should first extract the line-item detail and save it. Then delete the line-item
    detail from the scenario before changing the view. You must change the extracted
    line-item detail to match the new default view before loading it.
    The above is a reference from HFM-Admin guide.
    Could any one tell how to extract or delete line item??
    Thanx in Advance

    Dear Sree,
    Here my query is addition and deletion of line items in delivery suggestionable or not if not any alternate solution please............
    -->You can delete the line item in the delivery if PGI not done for that delivery,
    -->But system will not allow you the new item in the delivery,because as per the standard functionality system will copy the items from the sales order and this is advaisable also.
    -->So if you want to add new item add in the sales order then create delivery for that order.
    -->Still you want to add item at delivery ( for your business requirement) you need to do the item categroy determination for the deliveries through 0184 transaction.
    -->Redetermine the pricing at billing level for that item by maintaining proper copy control settings between delivery and billing at item level in VTFL transaction.
    Maintain pricing type field as B-Carry out new pricing
    Make sure that you done the pricing procedure detrmination with the combination of billing document pricing procedure in OVKK transaction.
    I hope this will help you,
    Regards,
    Murali.

  • Infocube line item dimension and performance optimization

    Hi,
    I remodelled an infocube and line item dimension contains only one characteristics set as line item dimension.
    previously the dimension as one characteristics but it wasn't set as line item dimension.
    and when I checked the SAP_INFOCUBE_DESIGNS from SE38  it looks ok.
    /SAP/CUBE   /SAP/CUBE3   rows:        8663  ratio:          3  %
    After setting it as line item the rows is now minus but it is showing red which means that there is problem with the dimension
    /SAP/CUBE   /SAP/CUBE3   rows:          1-   ratio:          0  %
    Its this a performance problem since it is showing red.
    thanks

    hi,
    No,its not performance issue.
    for a dimension to be line item dimension...the dimension size shouldn't be more than 20% size of the fact table size.
    when a dimension is set as line item dimension,the regarding SID will be placed in Fact Table,but not the DIM ID.
    may be that is the reason when your dimension is not line item dimension,it shows the number of rows and when it is made line item dimension,its not showing any rows and the ratio also null.
    hope this is clear for you.
    Regards
    Ramsunder

  • ECC6 - Line item display and Open item management Questions.

    Hi All,
    For SAP ECC6, although I do not maintain line item display and open item management for Recon GL (for Debtor), I still can use FAGLB03 to view the GL balances and even Drill down to line item level by double click the value from FAGLB03 until line item level.
    Questions:
    Could anyone confirm whether my assumption below, true?
    1) If Line item display (Tcode: FS00) is ON, then the data will be stored at table: BSIS
    2) If NO open item management, then there should be no data to be stored at table BSAS for thaty particular GL account
    3) BSAS will only have data, after clearing was carried out ... move from BSIS to BSAS.
    In ECC 6
    4) FAGLB03 can drill down to line item level, although the GL (Tcode: FS00) was NOT set open item management and line item display is because from FAGLB03 when drill down to line item level, it actually extract data from BSEG, right?
    Additionally, we can use FBL3N to check the line item data for NON line item display GL as well.
    In SAP R/3 4.7, if not mistaken, if the GL is NOT line item display and open item management, we cannot drill down the line item reading and CANNOT use FBL3N to check the line item data.
    Kindly advise on these.
    Thanks.
    sbmel

    1) If Line item display (Tcode: FS00) is ON, then the data will be stored at table: BSIS
    BSIS is an open items table. You can see all GL open items there. GL's which are not open item managed can't go here
    2) If NO open item management, then there should be no data to be stored at table BSAS for thaty particular GL account
    Yes. Your understanding is correct
    3) BSAS will only have data, after clearing was carried out ... move from BSIS to BSAS.
    Yes. In case of partial clearing data will be there in both the tables BSIS & BSAS
    4) FAGLB03 can drill down to line item level, although the GL (Tcode: FS00) was NOT set open item management and line item display is because from FAGLB03 when drill down to line item level, it actually extract data from BSEG, right?
    These are New GL reports and report is based on document split object. if your document split is active at segment level then you can see line item report at segment level using FAGLL03. These reports has no link to FS00 settings.
    Hope this helps

  • How to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM (ABAP Programming)

    Hi All,
    I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
    Thank you Very much.
    Regards,
    Ramesh J.

    Hi,
    Refer the below wiki link it may help you.
    Product catlog configuration for ECC - CRM - SCN Wiki

  • Vendor Line Item display/ and Purchase order Field

    FI Experts
    We recently implemented the MM PO module in SAP, we are creating PO's automatically in SAp from a 3 party system. We are using field "Our Field" EKKO-UNSEZ to enter a reference from the 3rd party system. Our account payable have requested that they need this field to display in FBL1N "Vendor Line Item Display". I tried by using special fields but table is not available. Anyone has any suggestions? I know I can use BSEG and EKKO but it is too big of a table to use. Does this requires more of an ABAP report rather than just a simple QUERY report?
    Your suggestions are appreciated.

    Hi,
    PO Nr. doesn't appear in Vendor line item, but yes, in GRIR account.
    So when are you performing MIRO, you may use XREF3 field, which usually remains blank, through user exit (OBBH) for populating PO Nr. But yes, if you are processing MIRO of multiple POs, you may not be able to set multiple values.
    BR

Maybe you are looking for

  • Problem with interactive booklet

    i just bought B'Day, by Beyonce, whihc comes with an interactive booklet. i double click on it and nothing happens.... i tried to open it in Quicktime and RealPlayer but it wouldn't work how does a digital booklet work? does anyone know why this is h

  • Get TableData form MDM ResultSet

    Hello, I'm planning to use MDM Business Package iView and WebDynpro. I want to transfer iView's table data to WebDynpro Application with using EPCF Event and then I want to create download button with WebDynpro. ref /people/steffen.ulmer/blog/2006/10

  • Finding out the source user and tablespace in a database export

    Hi folks, Lets say a customer gave us a export of their DB using expdp or exp, whats the best way to find out what users and tablespaces are in that export? With exp Ive used imp and created a index file but it seems a datapump export doesnt give up

  • Black outlines in scrapbook iphoto slideshow

    Something new and unpleasant is happening. Some of my photos in iPhoto SlideShows using the SCRAPBOOK option are showing up with thick black marker like outlines instead of with the nice frames like you'd see in an old photo albumn. This is only happ

  • Is there a way to export selected artboards to pdf?

    The goal here is trying to simplify export assets into xcode.