Line item display and sort key

Hello,
   can anybody pls let me know how can we change layout for f-53 ad f-28 and what is the significance of using sort keys and how can we use them.
please let me know,
thanks

IMG: Financial Accounting -> General Ledger Accounting -> G/L Accounts -> Line Items -> Line Items -> Line Item Display -> Determine Standard Sorting for Line Items
    (Transaction OB16)
You can define sort keys that are used to determine the structure of the assignment number.
Typical fields for the assignment number are posting date, document number, fiscal
year, purchase order, cost center, document header text.
The possible values for the sort key are saved in field TZUN-ZUAWA.
You can define a sort key in the master record of a G/L, customer, or vendor account  (Transactions FS01, FD01, FK01)(Table Fields SKB1-ZUAWA, KNB1-ZUAWA, LFB1-ZUAWA).
Assignment Number
The assignment number is used as a sort criterion. For example, the list for clearing      open items (FB05) or the line item list  (FBL3N, FBL5N, FBL1N) can be sorted by this  field. Besides this the assignment number is used as a group criterium for automatic
    clearing. During document posting, the assignment number is either determined from the sort key of the account master record or you can enter it manually (a manual entry overwrites the derived value).
Hope above clarifies your doubts..
Regards
Siva

Similar Messages

  • T.code required for Vendor line item display and Customer line item display

    Hi Gurus,
    Pl provide me transaction code for "Vendor line item display and " Customer line item display apart from FBL1n for vendor and FBL5n for customers.
    Kindly advise.
    Regards,
    Samar

    Hi,
    You could use these, for example:
    S_ALR_87012103 - List of Vendor Line Items
    S_ALR_87012197 - List of Customer Line Items
    Just curious: what's wrong with FBL1(5)N?
    Regards,
    Eli

  • Diffence in line item display and Balance display

    Hi Gurus,
    Please let me know why there is difference in line item display and balance display in one of GL account in previous year for 1 posting period.what can be cause for this, If I go at FS10n and check the balance for specific period it shows different balance and if I double click on same period and I can see the different Balance for same GL.
    Thanks
    Edited by: Manu Rathore on Feb 8, 2012 3:06 AM
    Edited by: Manu Rathore on Feb 8, 2012 3:15 AM

    Hi,
    this is FS10N - Balance display-GL X
    Period                    Dr                  Cr                 Balance
    12/2011                  33,229.00       49,395.00     16,166.00-Cr
      Type     Doc. Date  Amount in local cur. DocumentNo
      KG       31.12.2011              400.00  65762562
      KG       31.12.2011              200.00  65762563
      KA       28.12.2011              900.00  68250089
      KA       28.12.2011            1,000.00  68250090
    Line item Display Account             X 
    company Code            0000
      Type     Doc. Date  Amount in local cur. DocumentNo
      KZ       22.12.2011              500.00  69461532
      KA       22.12.2011              200.00  68250072
      KZ       22.12.2011              200.00  69461534
      RE       28.12.2011            4,445.00  60000201
      RE       28.12.2011            1,445.00  60000202
      KA       28.12.2011              250.00  68250084
      KA       28.12.2011            1,500.00  68250085
      KA       15.12.2011            2,000.00  68250077
      KZ       29.12.2011            6,555.00  69461633
      KZ       29.12.2011            7,868.00  69461633
      RG       30.12.2011            5,566.00  64000464
    Account x           33,029.00     
    See the difference in Dr side at FS10N it= 33229
    and line item total =33029
    Difference of 200.
    Same there is difference in credit side.
    Hope you understand it.
    Thanks

  • ECC6 - Line item display and Open item management Questions.

    Hi All,
    For SAP ECC6, although I do not maintain line item display and open item management for Recon GL (for Debtor), I still can use FAGLB03 to view the GL balances and even Drill down to line item level by double click the value from FAGLB03 until line item level.
    Questions:
    Could anyone confirm whether my assumption below, true?
    1) If Line item display (Tcode: FS00) is ON, then the data will be stored at table: BSIS
    2) If NO open item management, then there should be no data to be stored at table BSAS for thaty particular GL account
    3) BSAS will only have data, after clearing was carried out ... move from BSIS to BSAS.
    In ECC 6
    4) FAGLB03 can drill down to line item level, although the GL (Tcode: FS00) was NOT set open item management and line item display is because from FAGLB03 when drill down to line item level, it actually extract data from BSEG, right?
    Additionally, we can use FBL3N to check the line item data for NON line item display GL as well.
    In SAP R/3 4.7, if not mistaken, if the GL is NOT line item display and open item management, we cannot drill down the line item reading and CANNOT use FBL3N to check the line item data.
    Kindly advise on these.
    Thanks.
    sbmel

    1) If Line item display (Tcode: FS00) is ON, then the data will be stored at table: BSIS
    BSIS is an open items table. You can see all GL open items there. GL's which are not open item managed can't go here
    2) If NO open item management, then there should be no data to be stored at table BSAS for thaty particular GL account
    Yes. Your understanding is correct
    3) BSAS will only have data, after clearing was carried out ... move from BSIS to BSAS.
    Yes. In case of partial clearing data will be there in both the tables BSIS & BSAS
    4) FAGLB03 can drill down to line item level, although the GL (Tcode: FS00) was NOT set open item management and line item display is because from FAGLB03 when drill down to line item level, it actually extract data from BSEG, right?
    These are New GL reports and report is based on document split object. if your document split is active at segment level then you can see line item report at segment level using FAGLL03. These reports has no link to FS00 settings.
    Hope this helps

  • Vendor Line Item display/ and Purchase order Field

    FI Experts
    We recently implemented the MM PO module in SAP, we are creating PO's automatically in SAp from a 3 party system. We are using field "Our Field" EKKO-UNSEZ to enter a reference from the 3rd party system. Our account payable have requested that they need this field to display in FBL1N "Vendor Line Item Display". I tried by using special fields but table is not available. Anyone has any suggestions? I know I can use BSEG and EKKO but it is too big of a table to use. Does this requires more of an ABAP report rather than just a simple QUERY report?
    Your suggestions are appreciated.

    Hi,
    PO Nr. doesn't appear in Vendor line item, but yes, in GRIR account.
    So when are you performing MIRO, you may use XREF3 field, which usually remains blank, through user exit (OBBH) for populating PO Nr. But yes, if you are processing MIRO of multiple POs, you may not be able to set multiple values.
    BR

  • Segment Clearing A/c (GL account)-Line item display

    In our case new GL is active with segment clearing scenario.  The Segment Clearing A/c (GL) is maintained as line item display and open item.  However, when we view it from FS10n, period-wise balance is there but when we click on, no line item drill down is not displayed.  What is the solution to get line item display ?

    Hi,
    When you create Segment clearing account, line item display should not be ticked in FS00, only then you will be able to see the line item display.
    There is a standard SAP not also on this issue. I dont remember the note but you can find it in service.sap.
    You also do not need to keep it open item managed.
    Regards,
    SAPFICO

  • Line item display on GL account

    DearAll,
    my GL is line item display already,then there are transactionts posted in that GL,but still no line item display?and i have to run RFSEPA01.
    but GL is line item display already,why still need that program to update the relevant table

    HI dear
    Plz chk when the line item display has been activated for that Gl account.
    If that has been activated in the mid of year/month you will not able to see the line items that are posted prior to activation
    so i can suggest you to deactivate the line item display and activate again
    It will work
    Thanks & regards
    Prasad

  • FAGLL03 - Line item display in ECC 6.0

    Hi
    We are on ECC 6.0.  When i execute the report FAGLL03 for Line item display and double click on a line, system pops up a window with Line item details rather than actually taking me to Document display for that Line item
    What settings do i need to do so as to drilldown to a document directly from a line item
    Thanks in advance
    Shiv

    Thanks a lot Srikanth.  This works for FAGLL03. What if i want to execute FAGLB03, then go to Line items by double clicking balance and then want to view document
    Thanks in advance
    Shiv

  • Cheque Number in Vendor and GL Line iTem Display

    Hi
    How can we get to display the Cheque Number in T Codes FBL1N and FBL5N
    Samir

    Hi
    Please follow the paths
    GL Accounts:
    IMG ==> General Leder Accounting ==> Master Data ==> GL Accounts ==> Line Items ==> Define Special Fields for Line Item Disply
    Enter Table PAYR
    Field Name CHECF
    Vendor Accounts
    IMG ==> Accounts Receivable and Accounts Payable ==> Vendor Accounts ==> Line Items ==> Display Line items ==> Define Additional Fields for Line Item Display
    Enter Table PAYR
    Field Name CHECF
    After adding this, when you run FBL1N and FBL3N you can see the cheque number against payment documents.
    Thanks & Best Regards
    Sanil K Bhandari

  • Difference in GL Balance display and GL line item display

    Dear All,
    Can any one help me why the difference between GL display and GL line items display?
    Thanks in advance
    regards
    Elan

    Hi,
    You can do the following:
    1. carryout gl balance carryforward from previous to current year : Use t.code:F.16
             You can cross check the fs10n balance with FBL3N balance from previous years.  Assume these balance are matching for previous year 2007 and 2008, you have this problem only in 2009, then you can carryforward this balance from 2008 to 2009 once again. Some times users may post some adjustment entries as per the auditors recommendations. If this balance is not matching from 2007 itself, then first carryforward the balances to 2008 then 2009.  You can run this transaction no of times.
    2. check the master data of gl account through t.code:FS04, whether any changes has been done to line item display field?
               If you find any changes to line item display field then run the program "RFSEPA01" to get all the line items.
    3.If your issue was not resolved even after the above two activities, then let me know the  sap version you r working.
    all the best
    Prasad

  • FAGLB03 and GL Account Line Item Display  not tally

    Hi SAP Guru,
    Just wondering why our balance in FAGLB03 and GL Account Line Item Display is not tally.  What could be the reason and what should I do to have it reconciled?
    Thanks,
    Julie

    Hi,
    Please check the SAP note:
    Note 1223997 - Amounts incorrect in FAGLB03 navigation to FAGLL03 and FB03.
    1. There is a difference between FAGLB03 and navigating to FAGLL03.
    You display transaction figures of an account using FAGLB03.
    By double-clicking a line, you branch to the line items.
    The total of the items does not correspond to the balance.
    If you drill down to the 'Debit' or 'Credit' column, certain items may not be displayed, or too many items may be displayed. This occurs in particular with negative postings, for example because a negative posting 'reduces' the balances on the credit side.
    Therefore, this item should be displayed in the 'Debit' items when you navigate to FAGLL03. This does not work correctly.
    Reason and Prerequisites
    There is a program error or a data inconsistency
    If the problem symptoms are as above, kindly check in the system whether this note has been applied.
    Thanks
    Aravind

  • FBL3N and FBL1N line item display

    Hi Friends,
    - In TC: FBL3N, GL A/c line item display to be able to pull out data and display - vendor code, vendor name, PO No., text from PO (or MIRO header text)....How i can achieve this?
    - in TC: FBL1N, vendor GL to be able to pull Cheque No. reference in report...How i can achieve this?
    Thanks
    Para

    No.
    I think this requirement can not be met with the report painter as it would fetch data from multiple tables.Secondly thease transaction codes itself created through ABAP.
    Specification you have to provide to your ABAPER like table names & field names
    Regards,
    Abhijit

  • Material code, decription and Qty. in GL LINE ITEM DISPLAY FAGLL03

    I need the above fields in fagll03 and fbl3n.  i have tried in Special fields configuration, but i am unable to get the above fields

    Hi,
    You can try with BTE  00001650 -     LINE ITEM DISPLAY: Add to data per line in tcode FBL3N
    To add fields in tcode FAGLL03 use BADI FAGL_ITEMS_CH_DATA.
    Regards,
    Vinod

  • Customer number needed in "GL a/c line item display" for customer gl?

    Hi SAP Experts,
    while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
    How can i solve this problem?
    Plz guide me.
    I need a quick response.
    Regards,
    Biswa

    Hi,
    Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
    If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
    special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
    I hope these helps.
    Regards
    Ravinagh Boni

  • Line item display problem from table

    Hi experts......
    I am strucked up in my report  with a problem ,
    document no.(BELNR)  for corresponding bkpf has four line item  in BSEG table,
    BUZEI                      GJAHR  BUZEI   KOART  DMBTR           HKONT                                            
    9000000078     2006     1     S    200,600.00        0000500100     
    9000000078     2006     2     S    24,072.00          0000301500     
    9000000078     2006     3     S    481.00               0000300450     
    9000000078     2006     4     D    225,153.00        0000209800     
    My requiremet is that
    ========================
    when it goes inside the loop
    i want to display the belnr where Hkont  = '000500100'
    and koart = 'D', that will be 001 line item (buzei) and  0004 Buzei in this case.
    ie my output should be like
    ============================
    GROSS        NET
    200,600.00  225,153.00
    If i specify  and hkont = '000500100'and koart = 'D'. its not getting inside the select itself
    if i select without the where condition and hkont = '000500100'and koart = 'D' its going inside...
    Can you please help me out....
    My codings
    elect bukrs belnr  gjahr xref1 xref2  kunnr  buzei dmbtr hkont koart from bseg into corresponding fields of table it_bseg
                                              for all entries in it_bkpf
                                               where  bukrs = it_bkpf-bukrs
                                                      and belnr = it_bkpf-belnr
                                                      and gjahr = it_bkpf-gjahr
                                                      and hkont = '000500100'
                                                      and koart = 'D'.
    loop at it_bseg into wa_bseg .
       wa_final-kunnr = wa_bseg-kunnr.
       wa_final-xref1 = wa_bseg-xref1.
       wa_final-xref2 = wa_bseg-xref2.
        wa_final-DMbtr = wa_bseg-dmbtr.

    hi ...
    thanx a lot fo your reply,....
    thats wat i thought and was trying to do so.....
    and modified...can you please look in to the code....
    but wa_final-gross = wa_amount-dmbtr.
         wa_final-net = wa_amount-dmbtr.
    value is not getting populated ....i dont know the reason
    IF it_bseg[] is not initial.
    select  bukrs belnr gjahr dmbtr from bseg into corresponding fields of table it_amount
                                    for all entries in it_bseg
                                     where bukrs = it_bseg-bukrs
                                     and belnr = it_bseg-belnr.
    endif.
    if it_amount[] is not initial.
    select  kunnr  name1 LOCCO from kna1 into corresponding fields of table it_kna1
                                          for all entries in it_bseg
                                            where  kunnr = it_bseg-kunnr and
                                                   locco = pr_locco.
    endif.
    sort it_bseg by belnr.
    loop at it_bseg into wa_bseg .
       wa_final-kunnr = wa_bseg-kunnr.
       wa_final-xref1 = wa_bseg-xref1.
       wa_final-xref2 = wa_bseg-xref2.
    read table it_amount into wa_amount  with key belnr = bseg-belnr.
    if sy-subrc = 0.
    if wa_bseg-hkont = '000500100'.
    wa_final-gross = wa_amount-dmbtr.
    endif.
    if wa_bseg-koart = 'D'.
    wa_final-net = wa_amount-dmbtr.
    Endif.
    at end of belnr.
    Endat.
    Endif.

Maybe you are looking for