Line item display - Default icons legend - ON

Does anyone know if it is possble to set the icons legend in line item display (FBL1N, FBL2N, FBL3N, etc..) to always default ON.
We're in the throes of upgrading to ERP6 and this has been raised as a request
I couldn't find a PID for it or any other method.
We currently have to take the menupath "Settings->Legend on/off->icons" each time we log into the system.
Thanks in advance for any help.
Regards,
Angela.

Thanks Ravi,
This didn't quite answer my problem, but set me on the right path.
I managed to find parameter FIT_LEGEND which resolves the problem.  I'll run a mass update across our FI users and it'll fix the problem.
Regards,
Angela.

Similar Messages

  • Vendor Line Item Display-Default value for customer items

    Is it possible in selection screen of transaction FBL1N (Vendor line item display) the default value of field "customer items" to be checked?
    Thanks in advance.

    hi Tsiami
    it's not possible. if u want check customer line items go throw this TC:FBL5N
    plz assign points
    regards
    sivareddy.

  • Line Item Display - layout  default setting

    Hi,
    In GL-Account Line item display I have set a layout as a default setting. Now I want to set another lay out as default. The problem is the old default setting remains as default ahead and now we have two different default layouts.
    How can I delete the old default setting?
    Thanks

    This layout was defined as user specific and now this layout appears as standard layout in system of every user and even as default layout. And now this user specific layout is accessible by all users.
    Both above mentioned methods have not helped me.
    Is it possible to delete this user specific default lay out, which got standard layout for all users??
    Edited by: SIM on Mar 31, 2010 3:54 PM

  • How to default Line item display in GL master record???

    Hi..Guys
    How to default Line item display selection in GL master creation.....When we create GL master it will automatically get selected.
    Is it possible to do.
    Plz reply .

    Hi
    With sample account you can succeed your requirement
    Give all the defualt fields whtatever you want then use this sample account while creating GL account
    One more possibility is with SHD0 screen layout change with defaults (this thing i am not sure)
    Reg
    Vishnu

  • RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

    I'm still hoping that someone can help with this issue.
    Here's a repeat of the original question:
    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

  • Profit center line item Display

    Dear SAP Guru,
      When i post advance payment to vendor ,  in this case in g/l line item advance payment g/l show the Profit center , but when i check in t.code : KE5Z ( Profit center actual line item )  thr. advance payment g/l a/c does not diaply as i postees profit center .
    need solution urgently ..
    Regards ,
    Milind

    Hi Milind,
    Posting to profit center, by default,  is a statistical posting that go to profit center via assignment to CO objects or Master Data. Please check, whether your profit center already assign to one of CO objects such as Cost center. Or you can also the the assignment profit centers via 1KE4 - Assignment Monitor.
    If you already  assigned the profit center to CO objects and still  not shown in line item display, it can be caused be several reasons:
    1. Check the field status of your GL account ( the advance payment) via FS00 on tab "Create/Bank/Interest". Double click the "field status group" then on "display field status group overview" select the "additional account assignment", then check on profit center, is it as "optional entry" or "Suppress". If suppress, maybe that cause of your problem. on the other side, it set to "optional entry" you need to check the field status of you posting key.
    2. Posting key GL account Dr is 40. then go to customizing:
    Financial Accounting>Financial Accounting Global Settings>Document>Line Item>Controls-->Define Posting Keys
    Execute the define posting key, then go to PK 40. Double click the PK40, then on the top side click "Maintain Field status". Then select the "additional account assignment", check the field status of profit center.
    Hope this can resolve your problem. Please check it out
    Irhasni

  • Adding Special Field in the line item display

    Dears Through SPRO settings, I added the field 'Group Account Number' (ALTKT) for the GL line item display.
    It is now transported to Quality.
    When I try to see that field in the change line item layout, I could not find that field for inclusion.
    However, in the SPRO of Quality, I find that field already appearing.
    Why it is not appearing in the FBL3N special field screen ?

    Hi Niki,
    I am not sure how you have added this filed but if you follow these steps you will have it.
    1- Run FBL3N and make your settings and execute it (F8).
    2- Go menu Settings > Special fields (You can run it by t code OBVU out of FBL3n also)
    3- Add a new entry, select your field (BSEG ALTKT Group account number) and save it
    4- Back one step (F3) and select "Change layout..." icon.
    Now you have the field in "Hideen fields" column. Just select it as "show selected fields"
    Regards,
    Omid

  • Open & Line item display-FS00

    Dear All
    Pls let me know the difference between for checking the Open Item Tab only & Check the Open item & line item together in FS00
    Pls clarify
    Thanks & Regards
    Veena Kunthe

    hi...........
    If you check the Line item display, the line items for that account can be displayed.If you check open iten management, you will be able see line items with red and green lights as open or close and further you can clear open items in that account.
    For open item management, Line item display should be checked it is mandatory.
    Normally balance sheet accounts are managed on open item basis. vendor customers accounts are by default open item managed.
    Recon accounts are not managed on open item basis as there line items can be seen in subledger accounts.
    Regards,
    Manish Jain
    Pls assign point if you get satisfied.

  • GL & Vendor Line Item Display

    Dear Forum,
    The users want to display the Vendor Codes in the GL Line Item Display to reflect the corresponding vendor related to the expense in the GL line item and also want the GL Code to be displayed in the Vendor Line Item to reflect the nature of expense incurred thru that vendor. Are there any standard reports that could provide the details in this manner. Oherwsie how could we change the layout of the GL and Vendor line item Reports.
    Thanks for the help.
    Regards,
    Moderator: Please, search SDN before posting. This question has been answered 2-3 times only last week, not speaking about more recent period (as already mentioned by our SAP colleague)

    HEllo,
    In flb3n you can  do this by using the offsetting account logic which is explained in details in the SAP Note 112312.
    This way you can see vendor/customer information in the Line items report for GL ACcounts.    
    This issue has been discussed several times before. If you search the forum you'll see the replies.
    REgards,
    REnan

  • PO no not reflecting in GL/ Vendor line item display

    Hi Guys,
    Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?

    Hi Amit,
    You are right and I've changed the layout. I've already said that the field displaying there but data is not flowing in the field. I mean to say that PO no is not reflecting in the specified field. However I am able to get the PO no. in  Assignment field. What may be the reason and how I get the data (PO no.) in this field?

  • Vendor Line Item display/ and Purchase order Field

    FI Experts
    We recently implemented the MM PO module in SAP, we are creating PO's automatically in SAp from a 3 party system. We are using field "Our Field" EKKO-UNSEZ to enter a reference from the 3rd party system. Our account payable have requested that they need this field to display in FBL1N "Vendor Line Item Display". I tried by using special fields but table is not available. Anyone has any suggestions? I know I can use BSEG and EKKO but it is too big of a table to use. Does this requires more of an ABAP report rather than just a simple QUERY report?
    Your suggestions are appreciated.

    Hi,
    PO Nr. doesn't appear in Vendor line item, but yes, in GRIR account.
    So when are you performing MIRO, you may use XREF3 field, which usually remains blank, through user exit (OBBH) for populating PO Nr. But yes, if you are processing MIRO of multiple POs, you may not be able to set multiple values.
    BR

  • Vendor line item display with internal order

    In Vendor line item display is it possibe to see details of the line item of offsetting account .
    For example a expense account is debited & vendor account is credited .At the time expense account debit a internal order has been assigned in line item.
    User wants to see the vendor line item display ( T code FBL1N) with details of internal order appearing in open  line items display  etc .
    Is this possible .I created a layout with order as a field but order does not show any values in the line display of vendor.
    Please revert back if this can be possibe.
    Thanks
    Manoj

    with a combination of notes
    112312 - Line item - Display of offsetting ac information
    373268 - Line item - new display field
    569939 - Line item - Open FI - Absolute amounts
    1034354 - FAGLL03 - Display of offsetting account information
    you should be able to get it there.

  • Problem with Line Item display of G/L account

    Hi,
    I am struggling with a typical problem that I have two company codes in two different countries.  I have created a tax account with Open Item management and Line Item display in both the company codes.
    When I am trying to post vendor invoices, taxes are being posted on line item wise in one company code but not doing so in other company code eventhough the attributes of the G/L account are same.
    G/L accounts, tax condition types and account keys are same in both the cases.
    Can any body give me an idea to fix the problem.
    thanks in advance,
    Mallik

    HI,
    check the condition types you've defined for the both of the countries
    sprofin accting-f/a gl sett-tax on sales/pur -basic settings-check cal procd--define cond types
    there is a check box named item condition see whether it is ticked for the another company's condn type.
    because due to this only it takes the condn item wise.
    reward pts if it helps.
    Regards

  • Customer number needed in "GL a/c line item display" for customer gl?

    Hi SAP Experts,
    while running GL account line item display in FBL3N,customer number is not displaying against the gl accounts relating to customer reconcilation account or the gls relating to the customer line item entry.my clients need that in either ASSIGNMENT field(where presently showing the document entry date as defult) or in a different column.for that he even does not want to write any report.
    How can i solve this problem?
    Plz guide me.
    I need a quick response.
    Regards,
    Biswa

    Hi,
    Check If you are using the G/L account which is the reconciliation account for your customer, then it is possible to display the special field1-U_KUNNR and it is ALSO possible to add Sort Key 031 into the Assignment field of that account in FS00 tab Control Data and therefore to display your 'Customer no.' in the Assigment field in FBL3N.
    If you are using the G/L account which is the offsetting entry or the other side of the posting, then it is NOT possible to display your 'Customer no.' neither in the Assignment field, nor adding the
    special field 1-U_KUNNR to the display. At this stage, notes 112312 and 217189 may be of use, which enable you to use a Business Transaction Event to populate offsetting account information.
    I hope these helps.
    Regards
    Ravinagh Boni

  • Assignment Number in GL A/c Line Item Display

    Hi Guru,
    In Assignment No column, GL A/c line item display ( FBL3N ) it is showing the Billing Document No same as in Referance No Columnbut not the assignment no,
    but should actually show the Assignment No as per the Billing Document Display VF03, where it is showing correctly.
    Can you please help.
    Thanks
    Mukh

    are you saying the assignment field for the customer entry is correct but for the GL account it is not?
    If that is the case you could either do a mass update of the assignment field from the customer entry to the GL account entry.
    However to correct this at source you need a substution that looks at the customer assignment value and copies it into the GL account entry.

Maybe you are looking for