Line item only display after run RFSEPA01

Hi expert,
I set up all gl account with line item display but i need to block GL and run program RFSEPA01 so that line item will posted to BSIS table.
Is this need to run every after new posting done in?
As i run for one GL before with RFSEPA01 after new posting to that GL, i not able to view line item in FS10N, therefore i go and run RFSEPA01 again.
Is this everyday i need to run & re-run for all gl? Is there any configure i missing?
Please advice on menu path to configure the link to BSIS table.
Thanks.
regards,
chuan

Dear,
What is your requirement?
Why you are running RFSEPA01 daily when there is option "Open Item managed" ticked in FS00?
Program description: Switch On Line Item Display by Changing Master Record.
TABLES: bsis,
       *bsis,              "#EC NEEDED
        bsas,
       *bsas,             "#EC NEEDED
        bseg,
        bkpf,
        skb1,
       *skb1,
        ska1,
        t001.
RFSEPA01 is used when the GL Account is not there in open item status and need to change that to open item managed.
Check once again

Similar Messages

Fbl1n and fbl5n line item wise display the cutomer and vendor name

Hi,
My user is asking report for fbl5n and fbl1n line itemwise dispaly vendor and customer.See the report for one time vendor and customer name displaythe line item wise display in FBL!N/FBL5N. but not the display the regular vendors/customer.So one time table name BSEC
Please advise
Regards.
Edited by: yps y on Nov 13, 2008 1:26 PM

Hi,
line item reports FBL1N/FBL5N are reading the line items (wow, what a big surpise ) and displaying information on line item level.
As the vendor/customer name is NOT stored in the line items, you cannot display this in the lines (along with other item level information., like amount, posting key, doc.type, etc.). You may find a field called "Name 1) in the field catalog when configuring the ALV layout but this is empty for normal customers/vendors. It is only filled in for one time (Cpd) customers - the reason is as explained above: for these special accounts, the name IS stored on line item level (it varies from item to item),, that's why it can be read and displayed in the items.
Now how about normal customers/vendors?
You have to activate Business Transaction Event 1650 and implement a simple code so that depending on the account type (D = customer, K = vendor), you get the business partners name from table KNA1 / LFA1 and put it into field Name1.
Hope that helps, points welcome
Csaba

Line items not displaying

Hi,
When i simulate in F-28(customer), only one line items is displaying
eg: 40 SBI a/c 1500
but not displaying the remaining items like
eg: 40 discount a/c 500
50 ABC cutomer a/c 2000
what may be reason. where can i change settings
Rgds
sunfico

Hi
Check the partner function of the customer. Also check whether the customer is linkekd to any vendor accounts and that vendor has a open items.
Thanks
Ashok
Assign points for useful answer

VAT line item wise display in MIRO screen

Hi Team,
When I am taking MIRO, I am getting the base value of the stock purchased at line item level.
When I put tick mark in calculate tax, tax getting calculate. But this is not appearing in the line item level display.
I am working in retail. Each document contains at least 20 line items. But the vat for this is appearing in gross level. this creates the problem in verification.
How can I get the VAT column also beside the amount column at the line item level.
Please suggest.
Mallesh

Hi Malleswara Rao,
The VAT gets calculated in MIRO at gross level only. If clubs the multiple line items having same Tax Code to calculate the tax at gross level.
This is a standard design. You can also refer OSS note 1175418 which indicate the same kind of limitation in VAT processing.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1175418
Hope this will clarify.
Regards,
Gaurav

Deletion of Line item in Po after GR occurs

Hi SAP Expert,
Can we make the system to block the users from perform deletion the line item in PO after GR has been made? There are case that the user simpled
delete the line item in PO which GR has been perform and we what to block
the users from do this deletion.

Hi,
In attributes of system Message setting for PO try to add message no.06 115 as error and assign the same to users.Moreover this message comes as a standard setting and prevents from deleting the PO line if Gr is made .But this will not restrict if MIRO is done after GR.
Dhruba

R12: only 1 line item in receivables after transfer from AGIS

Hello,
I created 3 lines in an AGIS transaction and after approval in "Inbound", the lines were transferred to Receivables.
But, in receivables line items, we have only one line having the total amount of the 3 lines.
can anyone tell how generate same amount of lines in AR as defined in AGIS after the transfer??

well, i got my answer from metalink note ID 734551.1

ME22N : Change PO Line item to Display Mode, After All quantity has GRN

Hi Experts,
In ME22N, PO change mode if the line item has checked with 'Delivery Completed' Indicator in 'Delivery' tab I want to shows that row always in 'Display' mode. Please help me to modify that table control within the exit. I'm using,
Enhancement : MM06E005
Exit Name : EXIT_SAPMM06E_012
Regards,
Rajasekaran.S

Hi Raja,
Think that this is a late reply but might be helpfull to others.
To make an item in display only mode you will have to create an enhancement implementation in the below method,
Class --> CL_TABLE_VIEW_MM
method -->MODIFY_SCREEN_TC_LINE
in implicit enhancement at the end of this method i code as below.
data : lv_ekpo type ekpo.
if <DYN_DATA> is assigned.
move-corresponding <DYN_DATA> to lv_ekpo.
if lv_ekpo-XXX is not initial.
loop at screen.
screen-input = 0.
modify screen.
endloop.
endif.
hope this helps.
If you have a better solution kindly share the same.
Regards,
Taher

Line item not displaying thru fbl3n

Hello Dear,
I am not able to see my posting document thru f-02 thru t.code fbl3n. I have checked the master data of the gls there is already tick in line item display. For it i run a programe that is RFSEPA01, after running this programe i am able to see my posted document but not current post document.
Pls help it is very urgent.
Thanks in advance

Hi,
Although the question is not clear.
But before running the program, you must block the questioned GL account for posting and run the program and again unblock the same and execute FBL3N report.
Still , if you are not getting lines in FBL3N report, please check whether your new doc has line items in table BSEG or not thru SE16.
Regards,
Srinu

How to Print Multiple line items(only the one's that are selected in va22)

Hello All ,
My smartform should print the multiple selected line items that i as a user should be able to see as the output .
In my case i dont have any program that calls the transaction va22
directly from the transaction VA22 i give the ISSUE OUTPUT TO .
The Driver program that calls my smartforms fetches the data from table VBAP .
Two cases that i get because of this fetching logic .
1. When i try to fetch the data based on only VBELN in the output i get all the items that are in the particular Quotation .
2 . When i try to fetch data based on VBELN and POSNR in the ouptut when i select multiple items and give print the first item that i i selected is displayed .
Now what i need is to print only those data that i select in VA22 .
say if there are items A, B , C, D ,E in the Quotation .
and before printing i select A , C , D then only those items should be printed .
I hope any one of the Experts can solve my problem .
Thanks & Regards
Faran

Hi
I think you will need to do some enhancemwnt for this. What you can do select the lines in table comtrol and before issuing output you need to find a suitable wnhancement place where you can export the selected lines and make the corresponding change in logic for the same?.
Secondly uou can make a custom report also where user will select lines of po and print..but in this way you will need to many calculations
Nabheet

Sum of all line items and display at the bottom of the page

Hi ABAPers,
I am displaying line items in the main window based on PO number ....and I've a coloumn Total amount.
My requirement is after the line items , the grand total which is the sum of all line items has to be displayed.
Is this possible. If so, can anybosy help me in that.
thanks in advance

Hi ,
It is possible.
For that u have to do following
take one variable of same type on which you want to calculate total ... declare in global variable
double click in the table goto the calculation tab in that give the variable on which u want to calculate total
print in the total in the footer of the table ..
Hope you resolve your problem
Let me know any concerns......

Deleted line item not display in Print preview

Dear All ,
Pl guide that when i delete the line item from a P.O then this deleted item is not visible in Print Preview .pl help what are the exact setting due to which i can know why this del item is not coming in Print Preview.
Rgds ,
Rajeev
Edited by: sap11 on Feb 11, 2009 10:37 AM

HI,
Using the standard programm and print form the system works as follows:
When you will create a new Purchase order with two line item. System
will create new message record with Change message flag (NAST-AENDE) as
space and processing status (NAST-VSTAT) as 0 "not processed".
After this if you will output the message using ME9F then system will
update the message processing status NAST-VSTAT as 1 "Successfully
processed".
When you will delete line item 10, at that time system will create
one more message record with indicator Change message flag
(NAST-AENDE = X ) and processing status 0 "not processed".
Now system contains two message records in table NAST, one for which
processing has been done and one change message record for which
processing has not been done.
If you will run ME9F with processing status 0 then this means you
wants to output the change message record means you wants to inform
your vendor that item 10 has been deleted. That's why system show
line item 10 but you can notice in print preview, system mentions that
item 10 has been cancelled.
If you will run the message with processing status as 1 then this is
not change message output means system will show you latest print
of purchasing document and thus will not show line item 10.
Please take the print out of both message record and you can see the
difference.
I hope this information helps!
Best Regards,
Arminda Jack

Usage of line item dimension - design or run time?

Hi,
Can anyone please tell me at which stage a line item dimension is considered - at design time or after data load, once queries are run and performance degenerates?
I have read many posts and blogs about line item dimension and high cardinality, but I would require more information on when a line item dimension comes into play.
If we can decide at design time, then how is it done without data being loaded?
At which instances will the dimension table size exceed the fact table's size?
Please explain the above 2 points with a clear example, including the DIM ID and SID table access, and the ratio calculation for line item dimension consideration.
Thanks in advance.

Hello Aparajitha,
I agree with Suhas on point of consideration of LID . It would be good enough to consider a Dimension as LID in the Cube during design, it will be fruitful for the performance point of view. There is no point in saving the LID for future purpose if you have less than 13 Dimension in the Cube. It is going to save a extra join in connecting the relevant data.
If the total Dimension exceeds 13 or more (during design) , then you no option but include the related Char IO together in a one dimension.Here you cannot make a LID .
During the run phase, if the Dim table is more than 20 % of Fact Table, then for the sake of performance you have to go for the LID.In that case you will have the overhead of managing data (backup, delete & restore) .
On your specific questions :
"If we can decide at design time, then how is it done without data being loaded "
Technically same as you do during run-- Goto Dimension -- Right click --Properties -- and Check LID.
Logically -- Depending upon the Business meaning, which char has max unique values you can go with as LID.
"At which instances will the dimension table size exceed the fact table's size "
Frankly I haven't come across that.. ... Fact table is the center table and always will be the huge table in comparison to Dim table . Dim table cannot exceed the Fact Table ....!
Yes if the size of Dim Table is more than 20% of Fact table ( ratio of Dim Table to Fact Table) , then we have to select between the LID or High Cardanility.
Gurus..Please correct if anything is wrong ..!
Regards
YN

Adding new line item in SC after it is added to PR or PO

Hi Experts,
Our customer wants that if line item is added to PR and PO on ECC side, it should be added to SC as well. I am sure you can't change apporved SC for which follow on document is created. But if someone did similar kind of requirement.
Here is requirement.
> SC has 2 line items.
> PR is created in ECC for 2 line items after SC is apporved.
> User added 3rd line item in PR on ECC side.
> Customer wants this line item should be added to SC as well.
Please advise.
Regards,
Kamal

Hi,
In Classic Scenario: This is not possible .when you are adding a P.O in ECC it will not reflect in
SRM.
In Extended Classic scenario: In SRM only P.O is created .You can add a new line items (or) change
because P.O in SRM Server is the main P.O.
Moreover in this also Shopping cart will not update. Once Shopping cart is approved you can do any changes
Please check which scenario your client is using.
Regards
G.Ganesh Kumar

Vendor Line Item not cleared after F110

Hi Gurus,
We encountered an issue. The payment run was processed last April 18 and the vendor invoices were captured during the payment run and in the aging report, these invoices didn't appear as Open Item.
In between April 19 until August 19, these invoices are not part of the proposal list until the when they run payment on August 20. The value is zero and in the proposal list, there is a value in the Reason to Print Advice "A".
What is the reason for this?
Thank you.

Hi Dianne Obviar,
For that invoice payment delete uncompleted payment
proposal.
U go through this path select F4 in run date field
There check it any un completed proposal is there and delete
that invoice line item will come for payable
Regards
Surya

SAP Script Check printing Layout, Line Items to display twice in First Page

Hi All,
This requirement is for US check printing Layout.
My Requirement is to display Items twice on the first page.
Eg : Main Window has 10 Items, I need to display all the Items at the bottom in another window at the bottom.
I can't create 2 Main windows in the first page, as the data from the Main window 1 overflows to Main window 2 in the first page.
I copied print program RFFOUS_C into a Z-version and try to implement the logic, however unable to print the line items in the bottom window.
Kindly give your valuable Inputs.
Thanks
Vinayak

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

Line item only display after run RFSEPA01

Similar Messages

Maybe you are looking for