Line item report on Statistical WBS element.

Hi All,
I need to extract Line report on statistical WBS element. I tried CJI3 and end up with the message No costs, revenues or finances were selected.
can some one help me on this.
Thanks and Regards,
Vinod

Hi,
Please check below:
Table PRPS: Select OBJNR and pass to RPSCO and check if any value exists there. Note down the Value type, Year.
While in CJI3, please check if any dynamic Selection is active, remove all.
if mutliple selection shows any exclusions, remove all.
Posting Data: Remove the values. (Or put from 01.01.1900 to 31.12.9999)
Select the standard SAP Layout (Starting with 1SAP)
Value type=11 should be selected by default (Ensure it is checked)
Hope it helps!
Thank you and Regards,
Varshal Kachole

Similar Messages

  • Line item report on secondary cost element (cat - 21)

    Hi Gurus,
    Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
    Please clear this doubt. thank you

    Hi Mohit,
    I hope you can have line item report @ order and WBS element stright away...
    for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
    same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
    Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
    I hope it helps a lot if I understand your query right
    Regards..
    Jose

  • Cost element and Line item reports show different actual costs

    Hi PS experts,
    My client has an issue pertaining to actual cost reports. The cost element report shows actual costs $42,000 for one WBS and when I double click to see details the value it shows is $2100. Even when I checked line item report for this WBS the value is $2100. What could be the reason for getting different values? If some one throw some light on this it would be great helpful to me
    Regards,
    Laxminarsimha

    Laxminarsimha
    The values in CJI3 should be correct and will include all postings (e.g. Settlement values) and possibly Actual Revenues unless a filter is in place - so take this as being your correct figure to start with.
    Your drilldown will show the same value as CJI3 because it is CJI3
    Any cost element report you are using is probably correct for what you are asking - is this a Standard Cost Element Report you are using or is it bespoke
    One thing to be careful of when you drilldown on Cost Element Reports is that you do not always get the a make up of the value you have drilled down
    e.g.
    Cost Element Report was run for Period 1 to 6 2008 and shows £100.00
    You drilldown and sometimes the drilldown automatically shows ALL line items e.g £500.00 (not just the values for periods 1 to 6 of 2008 which you may expect £100.00)
    In the past I've removed the drilldown capability from bespoke cost element reports to prevent drilldown to the line item report (which is CJI3) because of this problem.
    Usually where values for a a number of periods only (not total costs) was required
    Other factors to consider
    Revenues/Settlements may be excluded from Cost Element Report but will not be excluded from CJI3 unless you specifically restrict
    You need to identify which types are postings are missing from the Cost Element Report (what is common...cost element, dr/cr indicator, business transaction)
    I've also hit the mistake in the past where I've asked for periods 1 2007 to period 3 2008 and instead of giving me just over a years worth of actual it gave me actuals for periods 1 to 3 for 2007 and 1 to 3 for 2008.
    Hope this helps
    Steve

  • WBS Element on AR/AP Line Item Report

    Hi All
    When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
    Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
    Thank you
    Rukshana

    hi,
    If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
    Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
    As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
    For Ex
    Expense 1 Dr  1000- WBS 1
    Expense 2 Dr  1000- WBS 2
    Expense 3 Dr  1000- WBS 3
    Vendor A Cr    3000
    Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
    Thanks and regards
    Praveen.J

  • Report: Statistical WBS elements with assets assigned to them - actual cost

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
    Assets assigned to each WBS
    Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    Hi
    There is not a standard report which can cater to your requirements. You need to develop one.
    You can take the refernece from CNS41 report for development. Some of the fields you need are PRPS-XSTAT for statistical WBS and will have to use tables ANLA and ANLC to fetch asset master data.
    Regards

  • Delete of Element in Form for COPA line item report

    Hello
    I would like to change a form used for a COPA line item report - delete an element, which has been included for years. Unfortunately I got message, that 'You cannot delete, because element xxx is dependent'.
    If I insert a new element if have no problems to delete it afterwards.
    Can anybody help me?
    Thanks in advance.
    Best regards
    Søren Kirch
    LOGSTOR A/S

    Hi,
    To my knowledge, you cannot delete the element until you assign the new one in the form if only single element is assigned.
    In case anymore element is there, there can be possibility this element is taken into consideration for making formula.
    Regards,
    Harish

  • Report:actual costs:statistical wbs elements and assets assigned to them

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
    Assets assigned to each WBS
    Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    Thanks for your reply but this is not the question.
    The question is:
    Example:
    I have 100 WBS Elements. Each of them has an average of 5 assets assigned. (what makes 500 assets)
    I post lot of invoices in each asset.
    I would like a report that tells me at once the total actual amount posted in each ASSET and group those costs by each WBS element.
    Thanks and regards,
    Miguel

  • Reports to see cost in statistical WBS elements

    Hi,
    Is there any standard SAP report available to see cost in statistical WBS element?
    Aman

    Closing the thread. Got answer.

  • We want to post actual cost through statistical WBS elements.

    when we do the posting on Costcenter assigned to a Statistical WBS element (2nd level), I was in the opinion that, the actual cost posted on the Costcenter of statistical WBS (2nd level) will reflect to the top WBS element (which is non-statistical in 1st level).
    But, I cannot able to see the actual cost in the 1st level WBS which also a Billing element (with this, finally we want to  do the Resource Related Billing).
    So expalin me how to bring actual cost posted on the costcenter of a Statistical WBS, to top WBS element which is non-statistical.

    U can book the actual cost from Procurement Cycle or by direct Invoice posting using FI transaction.
    Procurement Cycle:
    When you create PR or PO user Account Assignment Q or P and maintain WBS element. When u do GR or service entry actual cost is captured on the Project (WBS element).
    Using FI Transaction:
    When there is no PO and to book the cost u can use  F-43  to post actual cost (via Invoice) and mention WBS element.
    U can check the Actual Cost using Line item report CJI3 or S_ALR_87013532.
    Venkat

  • Customer and vendor line item report FBL5N/FBL1N

    Dear all,
    Could you please let me know, whether there is any way that we can get cost center ans wbs element in customer and vendor line item report FBL1N/FBL5N.
    REgards,
    Suresh Patipati.

    Hi Suresh
    Through BTE1650 you can fetch it . for this you have to  do some development.
    You can add additonal field to FBL*N reports with using BTE exit.
    Regards
    SAP student

  • Reports on Statistical WBS

    Hello All,
    Do we have any report on which we can see the statistical WBS postings? Also is it possible to view along with WBS, the cost centre on which the actual costs are posted?
    The only way I could find is run any of standard reports and use dynamic selection criteria for doing a search on Statistical WBS/Project defn. Is there any other way to report it, as the report doent specify anything as statistical and also the costs posted are seen as actuals. This is confusing for end users.
    Thanks
    Sarang

    CJI3- Actual Line Item Report can show you the statistical postings. You can identify them using the value type against each record.
    You can also create a variant in report using the dynamic selections (Shift+F4) and use the master data field on the WBS ' Statistical' .
    Regards
    Sreenivas

  • Profit center line item report

    Hello All,
    A sales order is created with reference to a service order, now when I see Profit center line items, the function area available in Service order is differ from the function area displaying with sales document number in profit center line item report. Can anyone please tell me where could be the problem.
    Full points will be awarded for the answer.
    Thanks & Regards
    Srini

    Hi,
    what SAP release do you have ?
    Normally the derivation of the functional area is made with the following logic:
    1) manually entered
    2) FI-Substitution (calling point 5 or 6 since ERP2004)
    3) cost center
    4) cost element
    Please see also SAP note 106180 of how to correct wrong functional areas in PCA.
    Best regards,
    Andreas

  • ACTUAL COSTS:REPORT WITH STATISTICAL WBS AND ASSETS ASSIGNED TO THEM

    Hi all,
    I would like to run a report that gave me this info:
    WBS Element (all statistical)
        Assets assigned to each WBS
              Actual costs
    It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
    any ideas???

    An statistical WBS element is an SAP object . Statistical means that you need another object to post the cost or income, let's say,an asset.
    Actual costs are the real postings you have in an object, coming from MM, SD, GL ... (just the contrary as budget or planned values).

  • How to change column heading in line item report

    Hello Experts,
    How to change the column heading in the line item report CJI4 or CJI3  ?
    for eg: The field WBS will show as Object in the heading. Here  I would like to change to WBS.
    Is there a way to do this without changing ABAP code
    FATMAN

    Not possible through standard I guess.
    Enhancement you should be looking is COOMEP01 which includes the component EXIT_SAPLKAEP_009
    i.e., Line Item Reports: Customer-specific Formatting of the Lists.You use this enhancement to modify column headings.
    Regards
    Sreenivas

  • Project System Cash Management in combination with statistical WBS element

    Hi,
    within  a customer project, we have to solve the following issue:
    Customer runs projects and statistical projects in combination with internal orders.
    We want to use the PS Cash Management for planned and actual payments.
    With statistical projects we have the following problem:
    Invoice and actual payments will be processed with the transaction CJFN.
    Actual payments are shown only on the internal order (transaction CJIA), but not on the statistical WBS element.
    We want the information about the actual payments with in the project system reporting (S_ALR_87013574).
    Projects, not flagged as statistical will deliver the expected results.
    Many thanks for your ideas, to solve this problem.
    Steffen

    are u posting to some other cost object also. normally they wud have to be posted to a COPA also with the cost element being 11 category.
    the wbs will receive the statistical posting, so there needs to be a real object also.
    see whether the real object is getting derived.
    the system is nt finding the real object and trying to post with the WBS in real, but since its statistical, the error.
    any other calrifications. plz post.
    regards
    anantha

Maybe you are looking for