Line item settlement(Invest prof)
Dear Experts...........
I have one doubt on Settlement (INVESTMENT PROFILE)
I have seen like
Summary setlement.
Line item settlement and list of origin.
I have read in SAP HELP ,evn though im not clear can any one plaz expalin in simple words about this different types of Setllements.
Lineitem,Summary settlement.....wht is the function,how it works.
Regards
Chandra
Hi
In the summary settlement you can not break down the values of line item (e.g an invoice) and distribute it amongst the receivers.
While in line item settlement you can distribute the amount of one invoice to different receivers. Take the example given in the link below. There are tow invoices from constuction (of value X) and electrical (value Y). Now if you are using the summery settlement then all the debit (X+Y) can be settled to one or more recevires but you can not break in between X and Y
While if you go for line item settlement then you can use distribution rule like 20% of X and 80% of Y to one receiver and balance to another.
http://help.sap.com/saphelp_47x200/helpdata/en/2a/f9f7de493111d182b70000e829fbfe/content.htm
Regards
Similar Messages
-
Line Item settlement of Internal Order through Investment Measure
Dear friends
Can we do the line item settlement of Internal order. The Internal order is created through IO as Investment Measure.
Thank YouHi,
Yes. It is possible to have line item settlement for Investment Internal Order.
Trust this helps much!
Cheers! -
Line item Settlement and KOB5 for automatically created AUCs to PM orders
Hello Experts,
I am trying to set up line item settlement for automatically created AUCs. We would like to use line item settlement because we want to see the costs split up by either percentage or amount when settled to the AUC. If I can't settle by percentage or amount to the AUC then i'd like to be able to temporarily block some of the costs from settling. This is for billing not capitalization purposes since all costs will eventually settle to one final asset. The settlement is done using transaction KO88 or KO8G and automatic processing type. I’ve configured a PM Order type as an investment order and set up the related investment profile and investment asset class. Some of the things I've determined from my testing:
Using transaction KOB5, costs can be split up by creating other distribution rules, but only to another object (i.e. another
asset, order, cost center etc. by using the Preliminary) not to the automatically created AUC linked to the order
The default settlement rule is account assignment category FXA, percentage rate 100%, settlement type AUC to the AUC
and therefore cannot be updated/altered when using KOB5 or any other transaction.
Once the costs are settled to another object other than the AUC, those costs cannot be settled to the final asset. Creating Preliminary
settlement rules to a receiver IO and changing the period or fiscal year will not “block” costs from settling whether the processing type is automatic, by period, partial capitalization or full settlement.
I’ve been testing this out in our development client and need verification that this is the way that transaction KOB5 works with line item settlement or did I do something incorrect .
Your feedback is greatly appreciated. Thank you in advance.Hi Zaid,
Thank you for your response. Assets are not my area so I’m not sure if I missed a transaction or step in the process. I tested this out by doing the following steps:
Created AUC Asset class with line item checked
Assigned PM Order type as non-investment with no investment profile and created order number
Created a main asset number
Created an AUC sub asset number to step 3
Created settlement rule to sub asset number on order
Posted costs to order
Settled from order to AUC with transaction KO88
Created distribution rules for asset with transaction AIAB
Settled from sub asset to main asset number with transaction AIBU
When I settled from the sub to the main asset number in step 9, I found I lost the line item detail. Is there another configuration setting I need to make to allow me to see the line item detail when I use AIBU?
Thank you, -
Tcode for line item settlement other than tcode CJIC
Dear SAP Guru,
Please let me know the tcode for line item settlement other than tcode CJIC.
Required urgently.
Thanks & regards,
Pradip ShelkeThanks for your reply.
Actually we are trying to create the BDC program for line item settlement. Through both the tcode CJIC & CJ70 this BDC program is not getting created.
So please suggest some other tcode.
Thanks & Regards,
Pradip Shelke -
Auc line item settlement to main assets
Dear all ,
We settled AUC assets Building no.91000002 in main assets Building No. 40000005 from using T-Code aibu and aiab. , we select line item to settle in main assets. After settling we got document no. eg. 4000002 ,, but i want see all line item settled to main document no 400002 , i have check SE16 table ANEKPV not showing my settled line item ,, pls give any tcode which line item selected to settled to eg.document no 400002. but we not using order no , wbs , project , i have check tocde KO88, AB03,CJID, kO02, AR01 Not find , how to know my selected line item, more details find the attachment ..pls help me
Regads
AjayDear Sir,
Thank for reply , i have checked e.g doc no - 1234561. then go environment and click original document, when i select it show two line item (list of assets document ) when i select main assets docs then go to overview assets docs , not go to CJ88 , so i am not able to resolve this issue , Pls help me ,,,
if anybody know pls give me ans asap,,,,
thanks
Regards
Ajay -
FI Line Item Substitution for Profit center
Hello Gurus,
The client wants
1- that what ever profit center they put in the field ZUONR (Assignment) field in the line items, should be substituted in the field BSEG-PRCTR. I know how to create a field assignment substitution. and had created that, but user wants that the substitution should check that the profit center put in the assignment field, should be validated and checked if its a valid PC or not.
or
2 - The user can put in the assignment field as PC=130001, so the substitution should check if BSEG-ZUONR :1-3: = 'PC=' and if the BSEG-ZUONR :4-9: is a valid profit center substitute the BSEG-ZUONR :4-9: in the field BSEG-PRCTR.
Any suggestions for both the above, how this can be done.
Thanks in Advance.Hi,
You will have to use an exit to do this.
The code will be like:-
Data: ZPRCTR like BSEG-PRCTR " Variable.
*Requirement 2 first
IF BSEG-ZUONR (3) = 'PC='
ZPRCTR = BSEG-ZUONR+3
else
ZPPCTR = BSEG-ZUONR.
*Check validity
Select single prctr from CEPC where
prctr = ZPRCTR.
IF SY-SUBREC = 0 " Found a PC
BSEG-PRCTR = ZPRCTR.
*If ZUONR is not a PC nothing is done.
Kind regards -
CUSTOMER BALANCE LINE ITEM DISPLAY WITH PROFIT CENTER WISE
Dear Folks,
Please suggest whether is there any standard report related to
customer balance report against Profit center wise or suggest the best way to create the Z REPORT LOGIC
Thanx In advance
REGARDS
ASHOK KHi, Ashok
Welcome to SCN
Please Don't USE ALL CAPS, it is against the Forum Rules, Check Bellow
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Faisal -
Line item diplay in Profit Center
Hi Friends,
I am working on ECC 6.0 version, when checked display document then profit center can be seen.
In the report S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance can be seen Profit Center wise data.
Where as when I run t-code KE5Z then there is no entry to Profit Center.
In this case what I have to do.
Please Advise.
Regards,
HarishHi, you have to investigate TA KE5Z a little further u2013 I am pretty sure that you have some restrictions in your search.
Try first to delete all options in TA KE5Z! Check that all multiple selection buttons are without colour and run the report again.
If there still no result u2013 post the exact error message here.
Regards
René Vestergaard Nielsen -
Hi
Created one invoice amounting Rs.12500. but the customer paid only Rs.12000.To settle the customer account can i create a credit memo of Rs.500.
OR what are the other possible doc type i can use to make the debit and credit entry same.
regards
DebasishHi Gupta,
As per the standard Credit memo request(reference to the Invice)-->Creditmemo.
But as per the client requirement we can do the copy control settings between the document types that is not a problem.
In your case the copy control done as per your client requirement from Invoice -->Creditmemo.
I hope it will help you,
Regards,
Murali. -
Profit Centre updation in Vendor or Customer Line item
Dear All,
With the concept of New GL, system is configured with profit centre and business area mandatory fields. after posting the document in MIRO and VF01 system is not able to capture the Profit Centre in the vendor or customer line item in " Entry View" where as in "General Ledger Veiw" PC is capturing properly.
Business area field is updating in the both the veiws.
Due to this we could not able to take the vendor or customer line item in the t code FBL1n / 3n. is there config setting missig or else system is behavior correct.
if sytem is behaving correct in this case how to take the vendor or customer line item with respective profit centre wise.
Thanks in Advance,
Sahil. KFirst of all go to SE37 and copy the function module SAMPLE_INTERFACE_00001650 and make a Z one out of it .
Then code your requirement playing aorund with the structure RFPOS .
Then Go to FIBF - Settings - Products - Of a customer . Here make a new entry with a Z one of yours as per your convinience .
Again go to settings - P/S modules - Of customer - Entere here the BTE 1650 and the product that you have created and enter the fucntion module name that you have made the codings in .
Save the entries .
Also , in the FM you can keep a break point and check what is the effect that is coming out in the Structure RFPOS after the FM is executed .
May take the help of an ABAPER for the same . -
Profit center updation in vendor line items
Hi,
how to update profit center field in vendor line items. it is displaying in general ledger view, but i can't find it in entry view. i maintain obbh settings also.
Regards
Sree
Moderator: Please, search before postingHi ,
It is standard behaviour of the system that only GL line item will have profit center and vendor line item will not have profit center .
In entry view only GL line item should have profit center and in GL view all the line item should have profit center .
If this is happening , then dont panic system is working fine .
Regards ,
Dewang T -
Work Order to cost center settlement with line item detail
Iu2019m having difficulty finding a method to settle from a work order to a cost center with line item detail. When an order is settled with KO88 or KO8G the total value for that work order/cost element combination is combined and posted to the cost center as a lump sum with the description of CTR\######. Users would like to see the individual values that posted to the work order in a cost center report such as KSB1.
I donu2019t see anything in the settlement rule, settlement profile or allocation structure that will allow line item settlement from work order to cost center. Is line item settlement possible when settling to a cost center? Is there an alternate way to see these expenses as line items in KSB1?
Thanks,
JeffThanks Christian,
We've defined an allocation structure that we use for Project System and Work Order settlement and have Receiver Categories established as FXA, CTR and WBS with "by Cost Element" checked. Work order costs do settle to the cost center entered in the settlement rule, the problem is it combines all items values as a single amount when posting to the cost center.
For example:
expenses post to the work order under cost element 500000 for $500, $200, $300 and cost element 600000 for $250 and $250. The settlement rule says to settle to cost center 170000. When the settlement takes place cost center 170000 is debited $1000 to cost element 500000 and $500 to cost element 600000. We would prefer to see individual posting of $500, $200, $300 to 500000 and $250, $250 to 600000.
Thanks,
Jeff -
Balancing field "Profit Center" in line item 001 not filled in VF02
Hi,
While releasing a billing document to accounting, we are getting the following error.
Balancing field "Profit Center" in line item 001 not filled.
Let me give more details about this.
We are in a retail implementation. Transaction combining cash and credit are normal in retail scenario.
Normally SAP billing document type is RV which does not allow item category 04000 which is cash.
To counter the above, we have created a document type YV with unspecified posting and assigned to SD document type BV(which is cash memo).
The billing documents with 2 line items with different profit centres, with SD document type BV when released to accounting is giving this error.
Any suggestions.Hi all,
This transaction Iam also trying to post in FI directly.
The entry I am posting is
Dr Cash 1000
Cr Sales 500 PC X
Cr Sales 500 PC Y
I want the cash account to be split with PC X 500 and PC Y 500. I am getting the same error.
Can some one please guide. I have assigned cash account with item category 04000.
Thanks
Aravind -
Profit Center in Customer and Vendor Line item
Hello Guru
i have one doubt we have activated the new GL in one of client for profit center level. while posting through any of financial transaction particularly customer and vendor there is no filed for input parameters for profit center. while booking these kind of transaction system pick up the dummy profit center. even our field status group for gl master data and posting key made as optional PCA filed not displaying. client want it should be pick up automatically from line item and should be input parameters.
how to resolve this issue please let me know.
waiting for your reply
Thanks & Regards
Laxmi narayanHi,
You are saying that u have activated New G/L, but are u gone for document spliting also or not? if you have activated document spliting customer and vendor line items not at all required any profit center because it will petch the profit center from oppsite line item automatically for giving tallyed balance sheet at profit center leavel, so no question profit center required or going to dummy profit center because dummy profit center will be locked automatcially once u activate document spliting.
if you have not activated document spliting then customer and vendor line items may require profit center its depends on your field status settings, if you feel that it should not go to dummy profit center then maintain some profit center in 3keh & 3kei settings for customer and vendor reconcliation accounts, so that it will post to that profit center.
Thanks & Regards
T N R -
Vendor line item transfer from one profit center to another profit center
Dear All
We have posted vendor line item in wrong profit center. now we want to transfer to correct profit center
what is the procedure?
VishvasHi!
You can transfer worng PCA line item in any Suspnese GL and then you can make new entry in Vendor line item with new PCA/CC.
regard,
Rup
Maybe you are looking for
-
Probelm I'm facing while saving an ALV report to Excel Sheet by clicking on the 'Save as File Icon' button on the ALV output.=0D Here data is going into a new Line after 65 columns.I've used Function Module 'RSAQ_ALV'.This function module is ultimate
-
Which Printer Please...
My HP 5650 died. So I need to get a new printer. Please, could anyone suggest an modestly priced inkjet that will work under 10.4.3 via an APBS? I really do not have any prefs as to brand...it's not my "main" printer...but I would like to get somethi
-
I shoot video on my camcorder and DSLR in 1920x1080 to have the best data possible for future use ... though all of my current work is posted to Vimeo Pro at 720p for web viewing. So far, I have set my FCP X projects to be 1080p ... would it be more
-
Can anyone help? I have written a complete Secure Configuration Guide/Policy for my company using Oracle 8 on Windows NT. However, they now want me to do another Guide for Oracle 8 on Solaris 7. I am trying to use my previous guide as a template, but
-
Using OLAP DML to maintain measures
Can anyone point me to documentation on running custom DML programs in maintenance scripts in AWM? I would like to be able, for instance, to output information to the Logs.