Line item split in FF_5 before posting based on business transcation type

Hi,
I have a requirement where in while executing FF_5 with BAI format, I have to split line items and post different documents for specific business transaction type. Please provide your inputs to achieve,if it is possible.
Regards
Hari

Hi,
I have searched forum but did not get any appropriate solution. Please provide your inputs for this requirement.

Similar Messages

  • Line item split - open item clearing (FB05)

    Hi,
    when clearing open items we need to preserve the line item split in clearing document as it was in cleared items. For example if we have two line items with different assignment (ZUONR) system generates only one line item in the clearing document (where amount is equal to sum of amounts from both cleared items). We need one item per assignment in clearing document. Thanks for any suggestions.
    Regards,
    Michal Majer

    Hi,
    You can always go to the "Analysis" button in the Condition Tab of the Particular Line Item and see what has exactly happenned.
    Now to understand your setting.... Was that Manual Condition Type .. A Header Condition ....In process... Once you enter a value in the Header Level automatically it will be transfered to the Line Items in the document ???
    Regards

  • Line item split-pricing issue

    Hi,
    In my order we have the process where th line items splits automatically when there is no enough stock.
    The issue is we have manual condition type value from the first item is not copied to the second item after split.
    Please help to find out where in settings do i need to check to find out why manual price is not copied.
    Thanks

    Hi,
    You can always go to the "Analysis" button in the Condition Tab of the Particular Line Item and see what has exactly happenned.
    Now to understand your setting.... Was that Manual Condition Type .. A Header Condition ....In process... Once you enter a value in the Header Level automatically it will be transfered to the Line Items in the document ???
    Regards

  • Balancing field "Segment" in line item 001 not filled while posting through

    HI All,
    I am experiencing the below error while processing FB70 transaction in Foreign currency with Tax codes (earlier this problem was not there, this is happening recently). The error description as given below.
    "Balancing field "Segment" in line item 001 not filled
    Message no. GLT2201
    Diagnosis
    The field Segment marked as balancing is not filled with any value in line item 001, even after document splitting.
    System Response
    The document cannot be posted.
    Procedure
    First check your entries.
    Additional causes could be:
    No value can be derived for this field from the current document data.
    You have entered a document type that is not designed for this business purpose."
    I have verified all the relevant settings like Classify G/L accounts for document Splitting and Document types etc and all settings are seems to be ok.
    But in the below two instances, Iu2019m not getting any error:
    If posting is done in company code currency with same tax codes.
    If posting is done in  foreign currency without tax codes
    Your early respons is highly appreciated.  Thanks in advance.
    Thanx & Regards
    Ramesh

    Hello
    Have you chosen Segment as Mandatory for the Scenarios during Document splitting. If not then for the G/L account you are facing problems with goto the field status and make segment field optional.
    Thanks and Regards

  • Customize Line Items Details Loading for Multiload TEXT-Based

    Hi all,
    has anybody customized HFM adapter to enable line item details loading for Text-based multiload files?
    Is it possible?
    Thanks

    But then we wouldn't have one text multiload file but several text files that will be converted into several .dat files to be loaded into HFM.
    Our current problem is that we have a multiload text file (we can convert from the Multiload Excel) but this file contains line item details. We want to keep the performance of loading only one .Dat file, but also load line item details.
    What about if the user split the multiload files into two:
    * Excel Multiload just with Line Item accounts (there are not so much)
    * Text Multiload for standard accounts
    This would be a nice solution as well? If they are happy....
    Thanks

  • How is line item split during doc splitting

    Hi Everyone,
    during doc spitting where is the percentage of split  done
    eg: 2 line itmes are split (40 /100.........1st line  itme) & (60 / 100........2nd line itme)
    Regards

    Hi,
    PLease check the Below informaition. We will not specify the Percentage's. Its taken by system as per our postings. for mor information go throw the below information and Examples.
    Information on Document Splitting
        You can use the document splitting procedure to split up line items for
        selected dimensions (such as receivable lines by profit center) or to
        effect a zero balance setting in the document for selected dimensions
        (such as segment). This generates additional clearing lines in the
        document. Using the document splitting procedure is the prerequisite for
        as well as an essential tool for drawing up complete financial
        statements for the selected dimensions at any time.
        You can choose between displaying the document with the generated
        clearing lines either in its original form in the entry view or from the
        perspective of a ledger in the general ledger view.
        For document splitting to be possible, the individual document items and
        the documents must be classified. Each classification corresponds to a
        rule in which it is specified how document splitting is to occur and for
        which line items.
        SAP delivers a set of standard rules that should usually prove
        sufficient. If not, you can define your own set of rules and adapt these
        according to your needs.
        Example
        Example 1: Invoice
        Suppose a vendor invoice containing the following items is entered:
        Posting Key Account     Segment     Amount
        31          Payables                -100
        40          Expense     0001                      40
        40          Expense     0002          60
        Document splitting then creates the following Ledger view:
        Posting Key Account     Segment     Amount
        31          Payables    0001          -40
        31          Payables    0002          -60
        40          Expense     0001          40
        40          Expense     0002          60
        Example 2: Payment
       The payment for the above vendor invoice then contains the following
       items when entered:
       Posting Key Account     Segment     Amount
       50          Bank                    -95
       25          Payables                100
       50          Cash Discount Received  -5
       Document splitting then creates the following document in the General
       Ledger view:
       Posting Key Account     Segment     Amount
       50          Bank        0001          -38
       50          Bank        0002          -57
       25          Payables    0001          40
       25          Payables    0002          60
       50          Cash Discount Received  0001        -2
       50          Cash Discount Received  0002        -3     
    Thanks
    Goutam

  • Sales Order Line Item Split

    Hello,
    If the inventory needed to fulfill an order item is available in two plants, we want to split an order item into two line items, each having a different plant. I think this can be done systematically, probably via a user exit in MV45AFZZ – MOVE_FIELD_TO_VBAP. Since I have never done this before, I was trying to think of the complications I might have and whether it will work correctly when coded within the user exit.
    If you have done something similar before, please share your thoughts on it.
    Regards,
    Prayarna

    Hi Rajavardhana,
    I suggest you copy the PBO and PAI modules of the standard Items Table control screen and paste them in your custom screen. Now you cann try and see if the double-click and other functionalities are achieved or not.
    Previously I had a requirement to add a button to additional B tab and other required fields in a table control. we achieved most of the requirement but not the button functionality the reason being as follows in one of my replies.
    [Re: User exit in VA01 - adding push button]
    Reward accordingly.
    Thanks and regards,
    Maddineni Bharath.

  • PERNR - Personnel Number on vendor line item of the FI document Posting

    After posting a time sheet (PR05, PRFI, PRRW), the FI document created (display via FB03) has the personnel number on each of the GL line items, but the field is blank on the vendor line item.  Does anyone know how to get this to be populated with the same data as being populated on the GL line items (it's the same field BSEG-PERNR)?  I've made the field optional on the vendor reconciliation account as well as on the posting key, but no success yet.  thanks.

    Thanks all for responding. 
    The vendor master was populated.  The strange thing is that the GL line item gets populated but not the vendor line item in BKPF/BSEG.  We talked to SAP and to get the vendor line item to populate we would have to do an SAP coding change.
    I created a quickview (SQVI) between the appropriate tables to get the report out that we needed (a bit easier than an ABAP) - but nontheless it worked.
    thanks again.

  • Tax line items when travel expenses are posted to intercompany

    Hello Experts,
    We are posting a expense report  to a different cost center other than the Master cost center(IT0001). In this case system understanding as intercompany transaction and posting the travel expenses to different cost center and different company code. But the problem is when there is a tax calcualted, this tax is initially getting posted to original master cost center and again transfering the taxes to the intercompany cost center. this is creating an additional FI documents and also additional tax line items which is becoming very difficult for reconcilation.
    can any one suggest me where could be the correction required in order to post the taxes to intercompany cost center in the first instance itself.
    Thanks&Regards
    Srinivas

    Hi Srinivas,
    Profit center was not picking for tax line item when we were doing multiple cost center in a TRIP. So we have activated "not deductible" in VST and it got worked.
    Later when we got a Cross company employee vendor posting, tax line items are posting in both company codes.
    So we have deactivated "not deductible" in VST and activated "set expense company code" in table T706K (to allow cross company code postings in TM)
    And defined a new solution in New GL config for the first prblem.
    We have not changed anything in "posting indicator" in OBCN, it was 2 (Separate line item) only. You should not change this.
    All postings went fine.
    Regards
    SM

  • How to mention posting keys for line items in IDOCS for fb01 posting

    Hi all ,
    I am using IDOCS for fb01 posting with posting keys 15 and posting keys 40 for line items .The data is in legacy file . I am using IDOC <b>ACC_GL_POSTING_01</b> for posting . Is there any way that I can mention the posting keys in the segment parameters of the IDOC.If there is anyone who have done fb01 posting with IDOCS,please help me with the code .Please treat the question as urgent .
    Thanks in advance

    Hi Arshad,
    There is no fecility to enter Posting keys explicitly.. It is determined automaticall by the Credit/Debit amounts u enter in GL data in the segments E1BPACGL08 and E1BPACCR08 and also it depends on the Customer and Vendor no.
    Sreedhar

  • GL Line Item with Tax Base Amount Posting

    Dear Expert,
    I have a GL account with tax and CO object. And, I am using BAPI_ACC_DOCUMENT_POST to do the GL posting. I would like to post the GL line item with tax base amount as it will show in FB03 line item, the posting is successful but no base amount is in GL line item in FB03. (I can manually post it in Tcode FB50).
    Any idea on this and what is the problem? Appreciate if can help..
    Thank you.
    Best Regards,
    Weng

    Hello Weng,
    I also looked on SAP notes. 
    There is a note with much information about Tax Postings with accounting BAPIs and it's a consulting note.  The note number is 626235.
    Regards,
    Rae Ellen Woytowiez
    Edited by: Rae Ellen Woytowiez on Dec 21, 2010 10:11 PM

  • Report for G/L line items with both debit & credit posting accounts

    Hi,
       My client requires a G/L line items report. It can be possible thru fs10n or fbl3n etc. But he wants to see both the credit and debit accounts in the same line.
    for ex: if I open a expense account and show the report of individual documents, he wants to see the corresponding credit item to which bank/cash account it got credited to.
    we showed them to double click on that document and goto document overview. but they dont want in that way.
    they want to see all the line items with both postings in the same sheet for all line items.
    valuable replies will be fairly rewarded.
    thanks,
    chaitanya

    Hi,
    U can use the following TCodes...
    - S_ALR_87012287
    - S_ALR_87012289
    - S_ALR_87012291
    But i am not sure if your client will be happy...
    This is a very common req and the only solution possible is to have a customized report for the client..
    Hope its clear..
    Cheers
    Raghu

  • I want to block SO line item wise qtg Change ,after Post goods received .

    Dear Expart
    I want to configue SO line line item wise qtg change after PGI.
    Can any one tell me the SPRO for the said configue.
    Yeasin

    Hi YEASIN,
    This option is not supported by standard functionality.
    But still you can achieve this thru User exit - MV45AFZZ -
    Ask your abaper to write the logic and input in the user exit - and issue a warning message as 'no changes can be made as Delivery for this item is completed' or wht ever way you want.
    Because we had similar issue and we had done this thr user exit and it was working fine now.
    Revert back if you need any more clarification on the same.
    Rgds
    Sunil.

  • Net value posting of 2 line items to 2 g/l accounts

    Dear Gurus,
    I have a requirement where I have a sales order with 2 different line items and I need to post the net values for which of those line items to different GL accounts. how can i do this
    Wishes,
    Abhishek

    Hi
    If both the line items have different Material and these material hve different Account Assignment Group (Material Master : Sales Org 2 view), then certianly you can post it in different G/L. Maintain your setting in VKOA accordngly for where for different Material Account Assignment Group different G/L will be attached for the same Account Keys of Pricing Procedure.
    Material Account Assignment Group can be changed manually in Billing also, before posting the document at line item level. So having proper setting of G/L in VKOA and changing the AAG of material while billing you can opt for two different G/L.
    Regards
    Amitesh Anand

  • Split Deliveries by Line Items

    Hello all,
    We would like to split deliveries that have more than 250 lines on them.  We have tried inserting code in several routines in transaction VOFM - Data Transfer - Deliveries.  We have copied Routines 302 & 500 and inserted code directly in 500. 
    Here is an example of what we have tried.  We count the lines in table xlips and if it is greater than 249, we delete the table from 250 and following.  Right now we are using 10 lines for testing purposes. 
    DATA: l_lines LIKE sy-tabix.
    *Limit deliveries to 249 lines for certain European plants
    IF likp-lfart = 'NLCC'.
      CASE xlips-werks.
        WHEN: '4310' OR '4311' OR '4322' OR '4331' OR '4341'.
          DESCRIBE TABLE xlips[] LINES l_lines.
          IF l_lines > 10.
            DELETE xlips[] FROM 11 TO l_lines.
            clear ilips.
          ENDIF.
      ENDCASE.
    endif.
    When we copied routine 500, the program wouldn't stop at breakpoints put in the code.  Now that we have put it in routine 500, we get a short dump related to ILIPS. 
    It seems to me that there would be a more elegant way of splitting deliveries than this. 
    Does anyone know of a way to do this?
    Thanks in advance,
    Chris

    hi
    i got your question.
    this you can achieve through only BAPI for delivery line items split.
    for eg:
    there are 250 line items in the delivery you wanted to split basing on the item category.
    you can use this BAPI with a different screen which will be similar to VLSP.
    maintain the fields in screen exit.
    and you can achieve on the same.
    but it taes long time for achieveing this
    regards
    balajia.

Maybe you are looking for